After the repair system that my computer does not detect wireless/Wired internet connection

Similar Questions

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Error installing Microsoft NET Framework 3.5 Service Pack 1 Setup program has detected that this computer does not meet the requirements to install this software

  I need to install Microsoft NET Framework 3.5 Service Pack 1, as it is necessary to perform a Dell diagnostic Test, but I've been advised that: Setup has detected that this computer does not meet the requirements to install this software. Requirement: Windows install 3.1.

  However, when I look at the download page of Windows Installer 3.1 is not actually as for XP with SP3. I tried anyway and: Setup has determined that the version of Service Pack for this system is newer than the update you are applying. There is no need to install this update. Well actually it is there...

  Is there a way to get around this?

  See below articles for solution

  1 system requirements for the .net framework

  http://msdn.Microsoft.com/library/8z6watww.aspx

  2 download links for .net framework

  http://www.Microsoft.com/net/download

  or

  http://msdn.Microsoft.com/en-us/library/5a4x27ek

  3. top 8 resources for .net framework

  http://www.Microsoft.com/net/itprofessionals

  4 dependencies and Versions of .NET framework

  http://msdn.Microsoft.com/library/bb822049.aspx

  5 frequently asked questions
  http://msdn2.Microsoft.com/en-us/netframework/aa497323.aspx

  6. management of versions, compatibility and run side-by-side in the .NET Framework
  http://msdn2.Microsoft.com/en-us/netframework/aa497340.aspx

  Good luck

• 30 days after the program Window 7 6 Lightroom does not, open a popup that says error 16. What should I do?

  30 days after the program Window 7 6 Lightroom does not, open a popup that says error 16. What should I do?

  Try reinstalling AAM.

  https://www.Adobe.com/support/downloads/detail.jsp?ftpID=4773

• The settings saved on this computer does not meet the requirements for the network

  My old laptop connects fine but my other not.  When I go to connect to the network, it says "the settings saved on this computer does not match the requirements for the network."

  Hello Tazdmx83,

  Thanks for posting on Microsoft answers Community Forums.

  This problem usually occurs on wireless network connections. I suggest that you turn off any wireless security feature by following the steps below.

  1. click on start and control access panel.

  2. double-click on network connections

  3. right click on the wireless adapter and select Properties.

  4. Select wireless networks, click the name of your wireless network and choose Properties.

  5. in network authentication, select open to disable wireless security.

  6. Please try to connect.

  If the problem persists, I suggest that you remove the connection and re-create the wireless network connections. The following Web site can help you on the creation of the wireless connection.

  http://windowshelp.Microsoft.com/Windows/en-us/help/297fa2dc-B20B-4327-B673-707a968c86801033.mspx

  Important note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  If the problem persists, I suggest you reinstall the driver of card wireless network and Re-create the connection.

  Remove the driver for the card
  ========================

  1. click on start. In the start search box type "devmgmt.msc", and then press ENTER.
  2. expand "Network adapters", double-click the entry for the wireless network device.
  3. click on the "Driver" tab, click "Uninstall".
  4. click on start. In the start search box type "appwiz.cpl", and then press ENTER.
  5 remove the entries related to the wireless network adapter.

  Reinstall the driver with your CD of drivers on the manufacturer's Web site. After installation, create the connection.

  Also access the link and try to follow the steps in troubleshooting network related issues on Vista-based computer:

  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  It will be useful.

  Thank you and best regards,

  Srinivas

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 Installer error "Setup could not use the existing system partition because it does not contain the required free space.

  Repeatedly tried to install the upgrade to windows 7 and pure install and get the error message on all partitions available "Setup could not use the existing system partition because it does not contain the required free space.  All 3 partitions on a single disk have over 90 GB and separated from the disc more than 65 GB of free space according to the properties of the disk and initial screen during installation.  Tried to reformat a partition empty all reinstall Xp sp3 without result.  What can I do?

  Remove the data cable of all drives except the drive that you want to install Windows 7 on.

  Remove all external devices.

  Delete all partitions on the disk leave all of the disc as "unallocated".

  Boot from the Windows 7 DVD and then install, when you reach the point where it asks you to select a drive, click the "Advanced" option and create a new partition (at least 50 GB) to install Windows and continue with the installation process.

  Also: http://social.technet.microsoft.com/Forums/nb-NO/w7itproinstall/thread/1b1adc74-3d94-4897-a3c1-7aabde44fe4b

  JS
  http://www.PAGESTART.com

• I just bought the rest of photography, then a message popped up on the screen saying that my computer will not support the program. Will I have to pay?

  I just bought the rest of photography, then a message popped up on the screen saying that my computer will not support the program. Will I have to pay?

  Please check the terms of System. Photoshopand unresponsive to your material, please update your computer or cancel the order, for this you can contact customer service

  [Note: make sure that you are connected to the Web site with the valid Adobe ID under which the product is]

  For more information on cancellation: cancel your creative cloud membership

• During the installation of Windows 7 Ultimate, get error, "the installation program could not use the existing system partition because it does not contain the need free space."

  When installing win7 ultimate, {install} error message indicates "Setup could not use the existing system partition because it does not contain the free space required... I have 500 GB free, ram 4 GB 2.4 ghz quad... any help?"

  If you have any external storage devices such as external hard drive or thumb drive, unplug them, they might interfere with installation.

• After the update (December 2015), Camera Raw does not fit on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  After the update (December 2015), Camera Raw does not on the save new Camera Raw default.  It keeps coming back to the default settings.  Does anyone else have this problem?

  Yes, this is the same bug.

  The engineering team working on it.

  We have no fixed timeline.

  In the meantime, you can restore the previous update.

• After you have uninstalled McAfee, my Wifi does not work (only works LAN connection)

  After you have uninstalled McAfee, my Wifi does not work (only works LAN connection). Troubleshooting message is "windows could automatically bind the ip Protocol to the ip stack.

  New Aspire E11, Windows 8.1

  Help, please.

  Here is how I fixed it:

  Go to control panel > network and Internet > network sharing Center

  Click on "Change adapter settings" in the left pane.

  Right click on your map. Select "Properties".

  There will be a box titled "this connection uses the following items."

  Uncheck anything that looks like it was installed by a third party (AVG, Avast, ZoneAlarm). In my case, the culprit was 'HTC NDIS Protocol Driver", who was installed by the software of my phone (HTC). Because it's not obvious what to uncheck, here is what I currently have checked in my system of work which should not cause a problem:

  KEEP THESE CHECKED:

  Client for Microsoft networks
  QoS Packet Scheduler
  File and Printer Sharing
  IP v6
  Internet Protocol v4
  Driver Link-Layer Topology Discovery map IO
  Link-Layer Topology Discovery recall

  Uncheck everything else.

  Go to network and sharing, disable and re-enable the adapter.

• Computer does not detect CD players

  I am running Windows XP Professional SP3.

  While I was trying to solve another problem, I made the mistake to delete CDRALW2K. My computer SYS. Now my computer does not detect my CD players in the analysis of FDI, and that they are not listed anywhere in my BONES. Is it possible to recover?

  Hello

  You can run the fix it from the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  See also: "CD recording software will be Cause Windows to become unstable" error message when you start Windows XP: http://support.microsoft.com/kb/315345

• computer does not detect not active LightScribe dvd writer drive.

  Bought in 2009-trusty HP Photosmart C8180 printer all-in-one has a permitted lightscribe dvd burner drive. Worked very well with 32-bit Xp computer.

  Now I have a new computer running Windows 7 64 bit, so had to download software like older software would not work. Printer now works fine again, even wireless. Yesterday I tried to use the dvd player, but my new computer does not detect the dvd on the same printer drive. I love this printer and nothing on the market has the following features for a replacement is not what I want.   Someone at - it suggestions. Cheers from Tasmania

  Tried the software. Its the same thing as what I downloaded when my own outdated software did not work.  I tried to add a USB in addition to the wi - fi connection. The computer then saw the drive. This means that it is the only way it will work or is there some software/driver tweeking or more I can / add to make ALL of the wi - fi function

• I have new iphone but my computer does not detect this why?

  I have new iphone but my computer does not detect this why?

  iPhone 5 requires iTunes 10.7. You have upgraded to this version?

  https://discussions.Apple.com/article/TS1538

  http://support.Apple.com/kb/DL1576

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• Computer does not detect the pci card

  Hello
  I have a dell dimension 4550 pc, with windows xp professional service pack 3.

  I connect to a card its pci in one of the pci slots empty of the motherboard, but when I start the computer the system does not detect the new card.

  What can I do to make the computer detect the new card?

  Thank you

  It is not clear what part to uninstall the drivers and install the good? So what if Windows installs the drivers? Uninstall them, do not restart and install the good. MS - MVP - Elephant Boy computers - don't panic!