need to use the cursor for the query

Similar Questions

• do I need to use the product for the management of the recovery key to refresh the window 8.1?

  do I need to use the product for the management of the recovery key to refresh the window 8.1?

  No, the product key will be automatically read from the BIOS.

• I used up to the allocation for the region 1 & 2 DVD for help. stuck on region 1 now. I need to use the two regions for my DVD. Help, please. Beryl

  I used up to the allocation for the region 1 & 2 DVD for help. Stuck on region 1 now.  I need to use the two regions for my DVD. Help, please. Beryl.

  It isn't a MS solution, there are solutions to third parties not supported by MS

• "XYZ" is not in the scope. You may need to use an alias for "MNO".

  Hello

  I use 3 entities

  Global

  ABC

  XYZ

  All relationships are in one on one, Global contains ABC and ABC contains XYZ.

  XYZ contains a text MNO attribute and I executed the bottom rule in the doc of the rule of the OPM 10.3.1 and 10.4. In 10.4 it works fine where as in 10.3, I get an error "" XYZ" is not in the scope. "You may need to use an alias for"MNO""

  MNO is correct if

  MNO = "MARK".

  I would like to know why I get this error and the solution for it.
  Thanks in advance

  I highly recommend to undertake formal training. Then the OPA is easy to get up and run with, it's like any other powerful tool that once you start digging into the most powerful bits you need to have a better understanding of the underlying concepts to really get the best value.

  You must also make sure that read you the excellent guide of best practices of Jasmine

  http://www.Oracle.com/technetwork/apps-tech/policy-automation/learnmore/policymodelingbestpracticeguide-1371173.PDF

  So assuming that we still use the above very limited model (it's rare to see 1:1 too many relationships in practice) and you need to get this working on 10.3... essentially, what you're going to need to do is navigate the relationships to pass information to the entity levels - I'll use your feature names as on the model, but they write the rules more difficult to understand.

  I suppose that the text of standard relationship containment generated automatically.

  the global attribute value

  1 For(all instances of ABC, ABC has an MNO of "Mark")

  2 otherwise

  ABC has a MNO 'brand '.

  For (all instances of XYZ to ABC, MNO XYZ = "Mark")

  Although personally I would also enter the condition in the second rule to a conclusion so separate.

• I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried re-installing 12 items three times in case there was something missing, but this has not solved the problem and save the enemy

  I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried to reinstall 12 items three times where it was missing something, but this has not solved the problem and enemy Save Web feature is always gray on. How can I get this feature too much work. I contacted the home and they have happened to you. I have 20 minutes to make a customers web work and if I don't work (about £500). Please advise/help.

  You are on the Expert tab in the editor?

• the search for empty cells by using the query designer

  Hello

  I'm trying to exclude empty cells in a field (by using the Query Builder), and I did:

  xDocumentSource < match > "CDL".

  < AND >

  < NOT > (xRelatedMsgid < match > "" "")

  but it does not work. I tried "NULL", but it does not work either. Could someone tell me how to do it (or where I can find examples of queries).

  Kind regards

  Iwona

  https://blogs.Oracle.com/Kyle/entry/searching_for_null_values_ucm

• Using the QUERY parameter in exp/expdp

  Hi, I've faced a nite last question.
  IM currently using Oracle 10 g (10.2.0.4) OS - MS Windows Server 2003
  
  I want a dump of tables to export multiple schemas. say (acb.m1, pqr.b2, xyz.b1)
  
  Each table has a minimum lines of 2,000,000,
  
  And I want to just the initials 10 rows in each table of export
  
  Is it possible that I can do this...
  
  Please answer.
  Thanks in advance

  Export tables in multiple schemas is not supported in Data Pump until 11.1.0.7. So if you're on 10g, you will need to run multiple commands expdp. For only 10 lines of each table, use the query parameter

  Query = "where rownum"<>

  This will apply to all the tables you export.

  I hope this helps.

  Dean

  Published by: Dean WINS January 30, 2012 08:42

• Extend the VO - need to change the query of VO - screen is off

  {Re-post the message in this forum (thanks to John Stegeman to lead me here...)   {Posted: August 28, 2009 04:27}
  
  Dear all,
  
  Thanks to this great body of knowledge, I ask my questions.
  
  I need to extend a VO to display the name of the country.
  The column is not in the VO. So, I need to get another table: FndTerritories
  
  I want to change the query, but the request frame is turned off (in the wizard the View - step 5 of 6 - Generated statement object substitution)
  
  Could you be it someone please let me know: how to change the application of the VO in this case?
  
  OR is there another solution for such cases, to maintain development standards
  
  Thank you very much
  
  Kind regards

  Hello

  I think that's when you just have to add an attribute, you should not click the expert mode checkbox... make use of
  Mix and add the button.

  But when you need to modify the query, and then we want to use to modify the query window...

  Thank you
  Gerard

• W530 need to use the external monitor as the main

  I have a training environment with the help of portable computers W530, who are locked in a box in front of the offices. It is not practical to reach the computer as it's hidden and so I need to use the dvi cable external monitor for the configuration of the bios, boot order, etc..

  Currently, boot options are hidden from the external screen until windows loads. The external monitor would then become active. A way around the monitor to the laptop altogether?

  Thank you

  Russ

  VGA is driven by Nvidia, so apply the same parameters. Comes to the boot monitor in VGA BIOS (I forgot what we call this specific setting, as my W530 is at home). You should always pass nvidia Optimus only.

• one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes

  original title: supervisor password

  one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes, and I don't remember the password. What can I do to fix this?

  any practical advice will be much appreciated.

  Hello

  Check with support from the manufacturer of your system (manufacturer of motherboard for customized systems)
  or a real computer store (that makes its own domestic service).

  The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

  Keep secure passwords - Microsoft strategy on move the passwords
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer still needs to use the Startup Repair tool

  Original title: my computer still needs to use the Startup Repair tool and I did a full scan of my computer and nothing came, so I don't know why I always have to use the Startup Repair tool

  I have windows vista

  Hello

  ·         The Startup Repair succeeded?

  ·         You receive an error message or error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Follow the steps in the following article, and check, if that helps.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem

  http://support.Microsoft.com/kb/934540

   

  Method 2: I suggest you do the startup repair using the Windows Vista disc and check if that helps. Consult the following link for the Startup Repair.

   

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Let us know if that helps.

• Do I need to use the software provided with the wireless hardware to go wireless? __

  I have a router Linksys Wireless (wrt160n) that I am not using. I whant to buy a (Linksys WUSB600N) for my office. I want to know if I need to use the software supplied with the hardware, or can I just use Microsoft Wizard to configure my network? Operating system is Vista Premium.

  Thank you Jeremy will do.

• I need to register cs2 once again, I need to use the part of the program bridge

  I need to register cs2 once again, I need to use the part of the program bridge

  There is nothing you can do to save your version/copy of CS2.  There is a special version for those who own CS2 and need to reinstall.  Infos and downloads are available through the following:

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• List of virtual machines in TIME using the query service

  Someone been able to use the query service to produce a range of virtual machines in a paralytic? I don't see all the attributes on the VclQueryadminVMField that reference the vApp.

  I log in the org of system.

  Any help would be appreciated.

  Name of the action: getVAppVms

  Entry: VAPP (vCloud:VApp)

  Output: Array / vCloud:VM

  Script:

  var vcdHost = vApp.getHost();
  var vms = new Array();
  
  var queryService = vcdHost.getQueryService();
  expression = new VclExpression(VclQueryVMField.CONTAINER, vApp.getReference().href, VclExpressionType.EQUALS);
  filter = new VclFilter(expression);
  params = new VclQueryParams();
  params.setFilter(filter);
  
  var resultSet = queryService.queryRecords(VclQueryRecordType.VM, params);
  while (resultSet != null) {
      var records = resultSet.getRecords(new VclQueryResultVMRecord());
      System.log(records.length + " VM records found");
      for each (var record in records) {
       var vmRef = new VclReference();
       vmRef.href = record.href;
       vmRef.name = record.name;
       vmRef.type = record.type;
       vms.push(vcdHost.getEntityByReference(VclEntityType.VM, vmRef));
      }
      resultSet = resultSet.getNextPage();
  }
  
  return vms;
  

  This is what made our team (more precisely - Christophe)

• DataPump import by using the query

  Hello
  
  I need to import data by filtering using the query. can anyone help?
  
  Thank you

  Hello
  example of

  expdp HR/hr = emp QUERY:'"WHERE dept_id > 10 AND sal > 10000"' NOLOGFILE = y DIRECTORY = dpump_dir1 DUMPFILE = exp1.dmp

  Impdp HR/hr DIRECTORY = dpump_dir1 DUMPFILE = expfull.dmp QUERY = departments:'WHERE department_id «»< 120"'="" nologfile="">

  See this link

  http://download.Oracle.com/docs/CD/B13789_01/server.101/b10825/dp_import.htm

• IMPDP | Possible using the query option

  HI PPL,
  
  I wanted to know if IMPDP is possible by using the query option, as I took full expdp dump of the mentioned table and want to import only select lines.
  
  Impdp arup/arup directory = demo_dir dumpfile = employees.dmp
  Query = employees:------"" where salary\ > 10000\ order of salary "tables used ="
  
  version: 10 gr 2
  platform: UNIX
  
  concerning

  Obviously, it will be slow if you are using the query option, because IMPDP must import only the data that meets the criteria; It of why we export only limited data (one or two tables as needed) and import them completely.

  Concerning
  Girish Sharma