Need to wait less than 1 ms.

Similar Questions

• My site optimized (22-59K) uses a grid for layout system. It takes 10 + seconds in Firefox 7,8,9 to load, other browsers need less than 1 second. Y at - it other that to use a 2-column layout, some recommended grid with which Firefox gets along?

  Someone commented ago about 9 weeks for my site to load very slowly. I tried and had no problem.

  But a few days ago, I realized that the first call (after rebooting the system) in Firefox 7, 8 and 9 of Firefox Firefox takes 10 + seconds (white screen) while other browsers have need of about 1 second. After the initial call each page loads faster than in other browsers.

  Without content management system, I got the same results. In simply removing things from the grid of my stylesheet, pages loading less than a second. I tried other grids http://cssgrid.net/, http://www.webdesignerwall.com/demo/simpler-grid/940grid.html , but had the same number.

  A identify the extension that is causing the problem in your case?

  He is always unpredictable, how the extensions behave with a new version and in case of problems you can contact the developer of the extension to inform him about the problems.

• I'm less than 2 weeks in my DW of the trial and I need to re - install the creative cloud Desktop App. It will start the download, then just disappears...

  I'm less than 2 weeks in my DW of the trial and I had to restore my computer (PC) due to a software conflict.  I went to re - install the creative cloud Desktop App and it will start downloading and then just disappears... I have no problem the first time around. I tried to restart my computer, turn off the firewall, etc. Did the same thing. Help, please. I would like to end my trial.

  Temporarily disable the firewall.

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.
  

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove? Rename it to Adobe Creative Cloud centenarians.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list. If you use the Adobe Cleaner CC Uninstaller tool.

  If not in the list, then download and install the Adobe Creative Cloud application and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• How can I reduce the size of a file less than 3 MB adobe? He is currently 3.15 MB and it is just a little too big for what I need in order to transfer to a job offer.

  How can I reduce the size of a file less than 3 MB adobe?

  Acrobat Pro can do.  However, the rate of reduction depends largely on the content of the PDF file.

  I suggest that you install the trial version of https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

• How to return the highest value in a column of numbers less than a given number

  I am a beginner using formulas in number.  I have an inventory in a Numbers spreadsheet (v3.6.2).  Inventory numbers are in a column.  I need to view the last number used or the highest number less than a given value.  In my case, it is 9000.

  I can put a cell to return MAX and it's cool, but I need to know the number < 9000, MAX.

  Hi JS.

  SEARCH is your friend here. One of the properties of the LOOKUP function is that it accepts a 'close-match', which is defined as the largest value less than or equal to the search value.

  

  Formulas:

  A2: LOOKUP (8999.9999999, D)

  B2: LOOKUP(9000,D)

  C2: MAX (D)

  Kind regards

  Barry

• How to create a formula to ask if something is both greater AND less than a range

  Don't know how to ask the question, but here's what I want to do.

  In a formula, I need an 'if' statement asking us:

  IF "cell id" is greater than "$ 100" and less than "$ 200", IF - TRUE, IF - FALSE.

  I don't see how the question of both the code < and=""> in this formula. I tried the instruction AND within the formula, but getting syntax errors.

  Hope the question makes sense, thank you.

  Hi Dwegs,

  It is a way

  IF (AND (A2 > 100, A2<>

• How to call dll com APIs that range from the performance counters of less than 1 ms with CVI and always get less timer resolution of 1 ms

  Hello

  I've created a dll com in VC ++ using performance counters/timers to less than a millisecond.

  This is useful when you send a message to very high speed. (say 10 or more)

  This is done by the dll.

  When I use CVI to create a user interface, this dll runs at a fixed rate of 1ms.

  This slows down the application.

  I tried to use the same dll with VC ++ host and it works well.

  I need to check the registry setting to see if the useDefaultTimer is set to false or TRUE.

  (I'm not near the development PC) However, by default, it should be FALSE and I have no fidle with it.

  Veuileez post any suggestions you might have.

  Thank you!

  This problem is now solved for me.

  Just the highest thread priority in the dll.

  Thank you if you had the answer.

• 15 - f010dx: Notebook is less than 2 months old and now won't turn on.

  I have a HP Pavilion 15-f010dx it's a little less than 2 months and is rarely used for light work. This morning I went to for use and the computer has been insensitive. I held the power button down and run to make sure that the computer was not "slow" mode. There is no display on the screen, "Wifi (airplane mode)" button was lit in orange colour and the 'Caps Lock' button was blinking. I assumed that the battery needs to death during the night, so I plugged the AC adapter and let it charge for two hours before trying to see if things would turn out. I tried on and I saw the same lights come on in the same way that I used the additional observation that I na could not pay attention the first time hear the computer will start and then stop Turing, this action repeated for quite some time, all while the lights stay on. I removed the battery from the computer and unplug the power cord I pressed the power button and held it for a minute or two, I plugged the cord back and the computer has been insensitive to this action. I have replace the battery and tried to turn it on again and I went through the same thing. The lights for the 'WiFi' would be on, key Caps Lock flashing and I hear the system starts for a few seconds and then off. I'm not sure what could cause this problem and I'd love to help, try to understand this.

  Ok.

  Time to use the warranty.

  If there is important data on the hard drive, it is highly recommended to use a hard disk enclosure or a SATA to usb connector. Once the hard drive in the enclosure or conmnevted to cable, you can connect the hard drive on another PC of Windows and copy data, so it does not get clean bythe customer Service

• Defragmentation stops and cut not less than 52%

  In one of my PC, one disc is not defragment. When I do using windows defragmentation option the fragmentation reduced not less than 52%. I tried so many times and face same problem. Then I checked the disc for errors using chkdsk, but found no errors. In this disc, I have 4 disks. But one of the disks is having this problem. Also access the data in this record is now slow. So, how can I defrag and solve the problem?

  This is the report of the defrgmentation analyze for the reader

  It's the report after defrgmentation

  Hello

  Given that the problem is related to Windows server 2003 r2, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  TechNet Windows Server general forum
   
  Let us know if you need help with Windows related issues. We will be happy to help you.

• My PC's performance is very hard hit. The PC was formatted 3 times less than a month.

  My PC's performance is very hard hit. The PC was formatted 3 times less than a month. Please suggest what to do. Run all the anti virus help? If so, please send url to download.

  Friday, October 8, 2010, 06:22:51 + 0000, shahidwin wrote:

  My PC's performance is very hard hit. The PC was formatted 3 times less than a month.

  Reformatting and reinstalling Windows because you meet one
  problem is almost always a very bad thing to do.
  With a minimum of care, it should never be necessary to reinstall
  Windows (XP or any other version). I ran Windows 3.0, 3.1, WFWG
  3.11, Windows 95, Windows 98, Windows 2000, Windows XP, Windows Vista,.
  and now Windows 7, each for the period of time before the next release
  came out, and each on two or more machines here. I never reinstalled
  None of them, and I've never had anything more than an occasional
  minor problem.
  I am convinced that this erroneous notion comes from the technique
  support people in most of the major OEMs. Their solution to almost
  no problem, they do not know quickly the answer to is "reformat and.
  replace. "This is the ideal solution for them. It gets down you the
  Phone quickly, it almost always works, and it does not require a
  make a real troubleshooting (a skill that most of them are obviously not
  own in any great degree).

  But it leaves you with all the work and all the problems. You have to
  restore all backups of your data, you need to reinstall all your
  programs, you must reinstall all Windows and application
  updates, you must locate and install all the drivers needed to
  your system, you must recustomize Windows and all your applications to work
  the way you are comfortable with.

  In addition to all these things being long and painful, you can
  have trouble with some of them: you will find all your CDs application?
  You will find all the necessary installation codes? Do you have any data
  backups to restore? Do you remember yet all customizations and
  tweaks can be installed to make everything work the way that you
  as? Sometimes there are problems that are so difficult to solve
  that Windows has to be reinstalled properly. But they are few and far
  between the two; resettlement should not be a substitute to the
  Troubleshooting; It should be a last resort, to be made only after all
  troubleshooting by qualified person other attempts have failed.
  And perhaps most important: If you reformat and reinstall without
  Discover what caused your problem, you will likely repeat the
  behavior that caused and quickly find you exactly backward in the
  same situation.

  That last paragraph above apply in your case.

  Please suggest what to do. Run all the anti virus help? If so, please send url to download.

  Do you run any anti-virus program? And no anti-spyware programs be?
  It is certainly the reason for your problems. You are infected
  by malicious software.

  For an anti-virus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one (are not
  run several) of the following three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software. I recommend that you download and
  (both freeware) to install MalwareBytes AntiMalware and
  SuperAntiSpyware.

  Ken Blake (MS-MVP)

• My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

  My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
  I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Less than 20 readers in a 3060e storage enclosure

  There is a warning on the 3060e to make sure that the first line of each tray is filled white or readers.  The manual simply says that the minimum number of disks is 20.

  The unit will be finally deployed with more, but I need to test a device with discs that I have on hand: (less than 20).

  Is this just for air flow?  In which case I can fill them with any old spare drive temporarily.

  Hello, Norro21.

  You are right. Without adequate ventilation, overheating is guaranteed. This is to ensure the air circulation in the table.

  Here's a quick 4-minute video on exactly that: www.youtube.com/watch

  You are invited to "fill them with any old spare drive temporarily", but there is no way we could guarantee the answer of the matrix or alerts in the GUI. (it is likely that it would be very nice)

  Have a great rest of the day!

• Windows 7 adjustable threshold less than 100% of the battery charge?

  Hello.

  I have a Clevo P170HMx which is a cell phone game impressive.

  Probably the only thing I don't like is that my battery is always 100%.  I used my laptop plugged into an electrical outlet.

  and knowing that to have my battery to 100% and always load will destroy the battery life.

  My previous laptop was an IBM Thinkpad, and it had a maximize battery gauge allows you to define the allowed charge batery

  threshold.  I got this game to start the load to 15% and stop loading at 20%.  I had this same battery from the time of purchase

  until 4 years later, I got my new laptop, the battery remained in excellent condition with load capacity full not escape

  as do other batteries when they stay at 100% and reload constantly.

  Is it possible on Windows 7 pro to change the threshold of battery charge to stop less than 100% load to save battery life

  life?  Or is it Windows software available for download that will make this recommended?

  If Windows 7 is not able to do this, I would say something in an update service pack or the next version of Windows.

  Thanks a lot for your help.

  See you soon...

  Hello

  In normal circumstances as soon as the lithium-ion battery is full, a properly functioning charger will stop the charge and will only engage when the battery voltage drops to a low level. Most of the users do not remove AC power, and this practice is safe.

  The latest Lithium-ion batterires have a limited number of Discharg/charge cycles.

  You can create a detailed report on the State of the battery to double check the battery status.

  1. go to Start / all programs / Accessories. Click on the command prompt and select run as administrator.

  2 in the command prompt window, copy / paste the following command.

  powercfg-energy-output %userprofile%\desktop\energy-report.html

  Press ENTER.

  Wait for the command to complete (usually about 2 minutes).

  This create a file named energy - report.html and place it on your desktop.

  3 go to your desktop and double-click the file to open.

  Scroll to the bottom for the battery: battery information section.

  You will see:

  Rated xxxxx

  Xxxxx full last Charge

  (Where xxxxx is a number)

  4 to calculate the amount of full Charge capacity left in the battery split the value of the last Charge full rated capacity and multiply by 100.

  For this example , use the following numbers.

  Nominal capacity 4400

  Last full 2937

  Calculator enter 2937 and divide by 4400.

  Multiply the multipliez le resultat result by 100 , then press =.

  The result will be 66,75

  This means you have 66,75% of the nominal capacity of the battery.

  Tell us what you find.

  Concerning

• Mr.Tra how can I download a version of win7 to operate on hyper-v of less than 10 years?

  I upgraded from win7 to win10.  I have an App and the printer that I use for my business that worked well with 7, but acknowledged not all printers within 10 years.  I'm trying to set up a virtual machine running 7, but I don't have the installation for 7 media.  Is there a way to lower the load has a version of win7 to operate on hyper-v of less than 10 years?

  [Original title: Mr.Tra]

  You will need to purchase an additional license.

  You will not be able to use your printer in Hyper-V, if its USB.

  What is the name of the printer and model?

  How to install and configure a printer in Windows 10

• laptop computer (HDD 320GB) with windows 7-64 bit OS.iam unable to shrink the drive c less than 155 GB

  Hello Sir,

  recently I bought the laptop (320GB hard drive) with windows 7-64 bit OS.iam unable to shrink less than 155 GB c drive please help me. I want to reduce this to 90 GB

  Its also the case that win7 takes only supported 4 basic partitions and you can't mention what Disk Management displays for drive 0.

  And also if a pre-installed version of victory, if you manage to create partitions and at a later date, you will need to use your recovery disks, that may well destroy all created partitions.

  For what reason you want to partition?