laptop computer (HDD 320GB) with windows 7-64 bit OS.iam unable to shrink the drive c less than 155 GB

Similar Questions

• Computer came with Windows 7 installed but no repairs or back up the drive

  I've lost my windows 7 when the computer has been clearewd of computer virus came with window 7, intentionis no disc for repair or replacement or go back, I have to buy all of them now

  * original title - computer came with Windows 7 installed, but no repair or back up the drive, grip and n computer virus cleaned a wiping, but lost windows 7 programs that I buy them? *

  Manufacturing must provide a means of recovery of Windows. Have you checked your user guide to see if there is a mention of a "recovery Partition" on the hard drive?

  Also contact manufacturing support team.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Laptop computer door model with Windows Vista Edition ML6721 Home Premium. Need to restore disk

  I have an old model laptop gateway ML6721 with Windows Vista Home Premium. Now, it runs very slowly and must be restored.  I can't find the restore disc and gateway has no more.   Where can I get a restore disk?

  Try www.restoredisks.com

  The built-in recovery partition is still functional? -You can create a set of disks? (check your manual)

• When I turn on my dell computer vostro 1700 with windows 7, I get a pop up box in the lower right corner that says "complete audit log. What should I do?

  Windows 7 log in

  Hi tmmjr,

  Welcome to the Microsoft Answers community.

  a. Since when are you facing this problem?
  b. did you change to your computer recently?

  Perform the clean boot on your computer and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.

  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
  http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• My laptop is very slow with windows 7 64 bit

  I install windows 7 64 bit on my dell xps m1530 4 GB of ram, but it seems that windows 7 use my ram too and my phone did become much slower than vista. Is there something wrong with my hardware or drivers? Hope someone can help me solve this problem. Thank you very much.

  Hi vinhnqls,

  I suggest to access the link below and follow the steps described in the article in order to optimize your computer for better performance. The article is intended for Windows Vista, but it remains valid for Windows 7 as well.

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance#section_3

  Let us know for any further assistance.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installed windows 10 64 bit on MBP early 2011, installing the driver software stuck bootcamp

  Installed windows 10 32 bit on MBP early 2011. Bootcamp software support 4.0 installs fine.

  And then upgraded to windows 10 64-bit on the MBP even. But bootcamp software installs ok at first, then gets stuck in the audio driver installation.

  Can someone suggest me the right version of the bootcamp software please?

  Also, I even this problems from yesterday, my macbook pro late 2011 updated for windows 7 64 bit pro at 10 64-bit windows, then all my drivers boot camp work but when upgraded to Windows 10 pro, Setup stopped in audio only step no thing happened, thank you, I need to fix the installation for my mac files because I have more than work on windows today...

• Problem BIOS update on my laptop HP G50 FS046UA with Windows Vista 32 bit home base. .

  I got the download from the HP download site, I downloaded the update and received message (IHISI: the support mode fail in SMI!) I click OK got another message (BIOS did not support InsydeFlash) and stop to download.

  The download is for an Intel processor, but I have an AMD processor. My BIOS, I have now is new 2.5.le BIOS is 6.3. Can someone tell me how to solve the problem.

  This BIOS is incorrect for your computer. HP wrongly linked this update of the BIOS for your computer model. Please DO NOT download or install this update of the BIOS.

  Based on your laptop to HP G50-109NR using a 489810-001 HP / motherboard (motherboard) by Partsurfer HP - PAVILION G50-109NR (FS046UA), the following BIOS seems to be used on other models with the same motherboard.

  BIOS F.54 A / sp45070.exe / 2009-08-27

  Please download and try to install this BIOS and report back.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Installed Windows 7 64 bit - 4 GB / 3 GB usable, whereas with Windows Vista 64-bit - 4 GB usable

  Hello
  I have the Asus N70SV B1.

  Specifications: (http://www.asus.com/Notebooks/Multimedia_Entertainment/N70Sv/#specifications)

  No problems with Windows Vista 64 bit, recognizing the 4 GB of RAM. After the upgrade to Windows 7 64-bit 4 GB installed / usable RAM problem / 3 gb. I also checked the following.

  1. I am running windows 7 64 bit, NOT 32 bit, I wouldn't be able to run Adobe After Effects® CS5.5 and Adobe first® Pro CS5.5 elsewise.
  2. the unusable 1 GB of RAM is not used by the operating system, it's hardware reserved
  3. the video card Nvidia GT 130 m 1 GB, shouldn't need that RAM - it certainly didn't on the factory installed Windows he dedicated RAM.
  4. I tried disabling and enabling msconfig - boot - Max memory settings, no option solves the problem.
  5. He has no option of memory in the BIOS settings to disable the cache in memory / memory the occultation.

  * I had to use the 64-bit of Windows Vista sound drivers work correctly with Windows 7 64 bit. So I thought that the version of bios or Vista 64 bit can thus solve the problem usable 4 / 3 gb.

  * Yes, I have flashed the bios to Windows Vista 64-bit and that still does not solve the problem. Although the system seems faster, it still shows only 3 GB usable.

  There should not be a problem with this bios version seen only with the 64 bit Vista OS recognized all 4 GB.  I am confused and have no idea where to go from here.

  Please help.

  Hello

   
  I suggest you to contact the manufacturer of the computer for help.
   
  Thank you!

• Can't get HP Desk jet 722C to work with Windows 7 64 bit

  I have an old HP Deskjet 722C I have used successfully for years, most recently with Vista Home Edition 32 (as well as with my XP laptop). I can't work with Windows 7 64 bit. There is no Win7/Vista drivers on the HP site for download. Bed in installs but does not print. The printer is found and installed, but nothing comes out when I try to print.

  Note that I have a parallel to USB converter on this printer, I have used / use with XP and Vista successfully.

  I see a lot of threads print say download the driver and run it in 32-bit mode to Vista. Since there is no driver to download I can't do. Convenience store is empty as well. Any other suggestions.

  Thank you

  Hello
  Welcome to the Microsoft answers site.
   
  HP C 722 Desk jet is not compatible with Windows 7 64 bit, then I suggest you contact the manufacturer.
   
  You can also check the compatibility, here is the link:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/b9ec9fc0-8121-48af-9d9d-8ee4c9f8c7fb

  Thank you and best regards,
  Azam - Microsoft Support

• DV 1412 with Windows 7 (32 bit). Biometric

  I recently bought my Windows 7, 32-bit after installation and also using the driver cd, I still cannot recover a part of the drivers.

  The Digital Persona is completely installed and same work obtained new updates, the problem is that the drivers for the finger Scan are not present in the DVD that I had.

  Is there any place where I can get drivers for finger Scan of the laptop mentioned above?

  I think you are looking for of validity sensor drivers that are available for download from the following link:
  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45217.exe

• Configuration of the Beats of Dre headphones with windows 7 64 bit

  I have configured my beat by Dre wireless with bluetooth via bluethoot logitech peripheral and its asking me to install the drivers for the headphones, I looked everywhere but could not find these drivers, is there a solution for this? Im running Windows 7 64 bit

  I think this is the driver that I used.

  https://www.dropbox.com/s/nmt9n1l6eh408mk/Bluetooth_Broadcom_V7a_6.2.1.500.zip
  to solve the problem. I would like to know if it works.

• HP keyboard mouse DM687A #ABA with Windows 7 64-bit

  Hello

  I want to get the new HP keyboard mouse DM687A #ABA. Could someone please tell me if it is compatible with Windows 7 64 bit?

  Please give me the link information and drivers if it is required.

  This kit consists of KB USB and mouse that are standard HID.

  You can use it with 64 bit OS and there is no driver needed. It should be detected and installed automatically by Win7.

• What version of developer costume oracle is compatible with windows 7 32 bit

  Can you get it someone please let me know what version of Oracle Developer suite is compatible with windows 7(32 bit). And please tell me the link where I can download this. I want to download this software to make the practices of Oracle Forms and reports by installing it on my PC.
  
  I had downloaded ds_windows_x86_101202_disk1.zip from the site of the Oracle, but during the installation it show the error msg in the newspaper as -
  
  ParamFile using: C:\Users\USER\AppData\Local\Temp\install\install\oraparam.ini
  
  
  Checking Installer requirements...
  
  Checking the operating system version: must be 5.0, 5.1 or 5.2. 6.1 membership
  Failure of < < < <
  
  Out of Oracle Universal Installer, log for this session can be found in C:\Program Files\Oracle\Inventory\logs\installActions2012-08-13_03-14-21PM.log
  
  Please press ENTER to exit...
  
  Please give me a solution for this-

  You can do more complicated it must be.

  In forms and reports Oracle Home, you will have a tnsnames.ora (ORACLE_HOME\NETWORK\ADMIN). If it's the file you changed, I would recommend cancelling all changes. Then simply copy and paste the entry from the db entries. So in you case put this in the file tnsnames.ora forms/States:

  ORCL1 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = USER-PC)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl1)
  )
  )
  

  It may be necessary to change the 'USER-PC' above to the IP address or the loopback address (127.0.0.1).

  In the forms/States sqlnet.ora file make this change:

  From:
  

  NAMES. DIRECTORY_PATH = (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)

  
  REPLACE:
  

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT, ONAMES, HOSTNAME, LDAP)

  
  The same concept is true for version 11 forms/States

  .

  Published by: Michael Ferrante (Oracle) on August 14, 2012 08:47

• Download the new course of Tiger Woods 2008 that are compatible with Windows 7 64 bit

  I downloaded the new courses for Tiger Woods 08 when I hac XP but now have Windows 7 64 bit and are unable to download the course.  Is this a driver problem?  How do I go so I can download these courses?

  Eaglemaster,
  Having Windows 7 64 bits should not affect your ability to download contect for any game.  If you have upgraded your PC from XP to Windows 7, you may want to uninstall\reinstall the game and then try to download\install the additional courses.  If you have a problem to download, check that your firewall or antivirus does not download.  You can perform a clean boot , and then try to download.  If there is still a problem, you must contact EA support to see if they have alternative download sites to try. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Where can I find a Windows 7 64 bit for a Brother HL-1250 printer driver

  I have an old Brother HL-1250 laser printer. When I got my new computer it came with Windows 7 64 bit installed. I plugged the printer, Windows recognizes the new device, downloaded the drivers and installed the printer. It worked fine for about a year. Then, a month ago, I tried to print with it in Excel and Excel told me it could not connect to the printer. I tried all Microsoft diagnostics and they did not help.

  I decided to uninstall the printer and reinstall it. I first tried to install through Windows Update search a new driver. Who has failed, I got was a cryptic message that says "Fail", without further details. Then I tried to reinstall using the existing driver and got the same cryptic "Fail", once again with no details. I went on the site of Brother, he said brother has no driver, you have to get it from Windows Update. I went to the support for Windows 7, this site says to get the driver of brother. I did a search of the Knowledge Base and he set up a generic PCL driver he said would work. I downloaded and tried to install it, but it is 32-bit and windows wouldn't install it.

  So I'm puzzled. Anyone know where I can get a driver 64 bit Windows 7 for the Brother HL-1250, or why the print has stopped working in the first place? TIA

  Have you tried this driver?

  http://welcome.solutions.brother.com/BSC/public/EU/eu_ot/en/DLF/DLF/000000/002100/dlf002166.html?reg=EU&c=eu_ot&lang=en&prod=hl1250_all&type2=82&OS=93&flang=4&dlid=dlf002166