need updated drivers Intel, motherboard, Dram and other

Similar Questions

• Can I use Dell original product key to activate a clean Windows installation after I have replace/upgrade motherboard, processor and other key components?

  I have a Dell computer, with Windows 7 Home Premium 64-bit installed in the factory. There is a product code for windows on the sticker on the box. My problem is that the motherboard and CPU are released. I intend to replace and update the motherboard failed and cpu, ram, power supply, optical drive and eventually put in a larger hard drive. From what I read, I can not simply start the machine with the original hard drive, with windows already installed and activated. So if I wipe the hard drive (or put it in a new), can I clean install Windows 7 and then just use the product key on the sticker on the box to activate the new installation? Or what I need to buy a new copy of Windows 7?

  I've also read on other threads, that you can "transfer" a license of Windows 7 on a different machine only if it is a "commercial" version, not OEM. If the version of Windows that is preinstalled on a Dell computer would be "retail" or "OEM"? And to reactivate the software on a rebuilt/updated machine up-to-date with the new motherboard, etc. would constitute a 'transfer to a new machine' or reactivation just on a computer upgraded?

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :

  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Need updated drivers

  Hello

  I need the updated drivers for my office please. I wonder if I can go to the site of the factory and ask them to do a scan for the drivers I need. Your help is greatly appreciated. Thank you.

  Here are the drivers that I need: Intel (R) G33/G31/P35 Express Chipset PCI Express Root Port-29CI

  Driver date: 02/06/2007

  Intel (R) 633/631/P35 Express Chipset processor to I / 0 controller - 29 C 0

  Driver date: 02/06/2007

  I've already updated my NVIDIA GeForce 9800ST driver.   Driver date: 14/07/2009

  HP Pavilion Elite m9360f

  Windows Vista Edition Home Premium (64-bit)

  SP2 Intel (R) Core (TM) 2 Quad CPU Q9300 @ 2.5GHz

  8.00 GB memory

  Cordially amberdidi

  Hello

  Intel chipset (Install and reboot your system after installation) here (ver 9.1.1.1025)

• Acer Aspire One model ZA3 (WIN XP) needs updated drivers

  I'm still enjoying my Acer Aspire One manufactured in 2009 running Windows XP Edition family, but am running into the faults caused by ancient drivers.

  A single analysis indicates that I need a driver updated GlobeTrotter MO40X but where and which?

  Acer computers can update their own drivers somehow?

  Thanks to anyone who can help me

  Where can I get information on the model ZA3?

  It's actually an Aspire One AO751h.  The drivers are available on the page drivers.

  I don't know what you are "scanning", but the "GlobeTrotter" MO40X is not a driver for an Acer system package.

  All the available drivers are on our page drivers.

• windows error update_80246001 while updating c-media bus controllers and other equipment

  jams, mouse pads when you use the scroll arrows to the top?

  can't update windows update?

  Original title: windows error update_80246001 to update c-media bus & ports & other hardware controllers. My mousepad on laptop, the control arrows side bar when they are affected block the mouse?

  Hello

  You should not select updates for 3rd party material well Windows Update.

  For the 3rd group of hardware drivers, you can get them from the Web site of the computer manufacturer, or the manufacturer of the particular material.

  Microsoft is known for not having the latest drivers available for material from other manufacturers, Microsoft relies on the manufacturer to provide.

  See you soon.

• help for my toshiba satellite L650 Moose drivers for win 7 and other software

  where I can download my toshiba satellite L650 utility such as toshiba eco, toshiba pc health moniter and other audio Moose vedio drivers?

  Visit the Toshiba support site and click on "Download" in the menu bar at the top: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp

• Should I update my Intel motherboard drivers?

  I own a PC Intel D945GCNL Motherboard and Microsoft Windows XP Professional Version 2002 Service Pack 3 operating system. I am a user of Home PC and my PC is also supported 32-bit in the display and the version of DirectX 9 .0c for multimedia.

  My question:

  Is this OK to update the drivers from the Intel Download Center?

  For an example:

  (1) now I have Realtek HD Audio Driver 5.10.0.5404 in my PC. Intel Download Center shows that for Intel D945GCNL motherboard equipped with the Microsoft Windows XP Professional operating system, there is a latest audio driver (released 09/23/2010) called Realtek driver Audio ALC, which installs the version of the audio driver Realtek 6196. Is this OK to download this new driver?

  (2) now I have Realtek Ethernet LAN Driver 5.664.205.2007 in my PC. Intel Download Center shows that for Intel D945GCNL motherboard with the Professional Microsoft Windows XP operating system, there is a latest driver LAN (published 02/08/2010) named as version 5,764. Is this OK to download this new driver?

  (3) Similarly, should I update the version of the graphics driver, too?

  Please give me your wisdom, advice, comments for this problem!

  suresh87 is correct, you need to update the drivers you listed on the Intel site .  Card mother Intel® D945GCL has the Realtek ALC888, Realtek RTL811B-GR and the Intel® 945GC chipset (which includes the Intel® 82945GC Express Chipset Graphics Memory Controller Hub) as embedded devices.  With what is the case, the Intel® Web site is thefavorite of all the drivers of the said source.  Intel was able to customizations for all Realtek drivers specific to their use on their D945GCL which all drivers that you might find elsewhere will not be included.

  Once you have downloaded and installed the drivers above, you can run DirectX® end-user Runtime Web install dxwebsetup.exe from Microsoft, , because it will download and update software DirectX v9.0c pilots who may be out of date on your system.

  Vote if you find it useful.  Click on brand or propose as answer if that answers your question.  This will allow more quickly find that answer in the future.

• Windows update code error 00000646 KB960003 and others. did a scan and found that I have some corrupted files that cannot be fixed in the C:\windows\Logs\CBS\CBS. JOURNAL, I need help fixing problems

  error message 00000646. tried repair, cleaning of files and did the sfc/scannow

  Have you seen this sticky yet? -Online http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Envy 17 3010eg: upgrade to Windows 8 and update Bios: no switchable graphics and other problems

  Hello

  I'm of the Germany, but I'll do my best to write this in English.

  The product name and number: HP Envy 17 3010eg {information}

  Operating system: Windows 8 Pro 64-bit

  Drivers: everything up to date

   

  Long story short,

  I just wanted to upgrade the pre-installed Windows 7 Home Premium 64 - bit to the new Windows 8 Pro 64-bit.

  So I waited until the driver for Windows 8 support has been completed by HP.

  This month, I noticed that HP has released a graphic driver for Windows 8.

  Happy as I was I installed Windows 8 immediately via upgrade function.

  I installed all the missing drivers.

  * Update Bios to F.08*

  I noticed that I had to upgrade my Bios to version F.08 to install new graphics drivers. I did the upgrade and installation of the driver.

  BUT after the update to the version of the Bios the laptop only F.08 recognized the AMD graphics card. The integrated Intel HD 3000 graphics card had disappeared!

  Even after installing the new graphics driver, the Intel card is still missing in the 'Device Manager' of Windows 8.

  The battery life is now about 1 1/2 to 2 hours maximum because the laptop always uses the card AMD.

  So I looked in the 'new' Bios, but I have not found a way to change the graphics card. So I think that there is only a 'software' switch to do so.

  I have installed "AIDA64"and look under "Graphics".» The graphics card Intel HD 3000 has been mentioned as 'disabled'.

  Nice, but I have no idea how to turn it on again.

  So I re-installed Windows 8. This time, I did a completely clean install. With the same results.

  So, I switched to Windows 7, and there you go. Two graphics cards are displayed in "Device Manager" and the switchable graphics feature works perfectly (! even with the new version of the Bios F.08!).

  * Tested in Bios Version F.09*

  Yesterday, I noticed another Bios Update. This time in version F.09.

  So, I updated the Bios with Windows 7 installed.

  Everything went well (I thought!).

  Once, I've done a completely new installation of Windows 8 to take a peek, if Intel HD 3000 card will be recognized this time.

  BUT without success...

  So, I thought that the problem could only be Windows 8, because Windows 7 works perfectly.

  * Problems with Bios Version F.09*

  BUT then, I noticed a strange behaviour of my laptop:

  -proximity sensor no longer works

  -the keyboard backlight cannot be (DIS-) activated

  -the brightness of the backlight is half as usual

  -internal fans are going crazy-> they accelerate without reason (laptop is idle) and won't slow down until I do a re-boot

  * Version of the Bios downgraded to F.05*

  So, I spent to the version of the Bios to the older Version available: F05

  And I was a little shocked by the result.

  Windows 8 acknowledged the Intel HD 3000 graphics card again!

  The problem is the Bios!

  Then, I upgraded the version of Bios version to see which version of the cause of the problem:

  Œuvres F05

  Œuvres F.06

  F.08 does not work

  F.09 does not work

   

  So I decided to stay with the version F.06

  BUT to install the new Windows graphic 8 driver you need the version of Bios F.08 (min.).

  I installed the driver anyway...

  I found myself with a black screen... I had to reinstall Windows completely.

  Yet more long story short,

  I ended up using Windows 8 Pro 64 - bit with the graphics card AMD only.

  I also updated the Bios (back) to the version F.08 dispelled the problems with the version of the Bios F.09 I mentioned.

  So for the moment I am absolutely no idea what the problem might be.

  The support has not yet heard of these problems and I have not found any website which explains the same problem.

  Every posting, I found explains that the AMD card is not recognized by Windows 8 but Intel HD card.

  Someone else got the same problems?

  What do you think? Is it really a problem with the Bios?

  What can I do to solve the problem?

  for me the best driver are:

  http://leshcatlabs.NET/

  Works Perfekt (cards during execution of the F06 BIOS and a map when F08/09) and are updated often.

• Qosmio G20-102 (PQG20): Vista Upgrade Advisor says I need updated drivers

  My Windows Vista Upgrade Advisor says I need a few following things,

  -These issues of device for Windows Vista-
  See the following table for the device problems you should be directed to ensure that they work properly with Windows Vista

  > ACPI Bluetooth Toshiba

  -Cannot find information about these-(même si elle dit que ces dispositifs peuvent être mis à jour après la mise à niveau vers Vista, je ne veux pas risquer quoi que ce soit.) devices

  > TOSHIBA RAID virtual device

  > Compatible TOSHIBA ACPI value-added device to use general and logical

  > Bluetooth RFCOMM

  > Texas Instruments PCIxx21 Integrated FlashMedia Controller

  -These issues of program for Windows Vista-
  See the following table for the program issues that you should address to make sure that they work properly with Windows Vista.

  > (Not very important, the rest are tho) sonic DLA

  > Alps Pointing - device Driver (is it not the touchpad?)

  > TOSHIBA utilities

  > Microsoft Interactive training (Don; t know what it is...)

  Thank you in advance for your help, I tried to search the Download Center of Tishiba for some updates, but none of them are very recent.

  You are right. Section Toshiba download drivers are not yet available. Unfortunately, no one knows how long it takes for them, but if your device is delivered as Vista capable laptop computer will be certainly supported for Windows Vista.

• Acer Aspire 5520 (WIN XP Pro) needs updated drivers

  OS Vista on my Aspire 5520 had many files damaged as well as the recovery disc. I couldn't find my original disk so I decided to install Win XP Pro I had my original disc of one of my other computer that got fried. Installation goes very smoth but, when finished, I checked the Device Manager and fould 8 element listed under other devices.

  2 base system device

  Coprocessor

  2 Ethernet controllers

  PCI device

  SM Bus controller

  Video controller VGA compatible

  Impossible of course to access the Internet with the Aspire. I have another computer I could download the need for pilots to a Flash drive, if I could find where to get them. This problem is I woke up on 5 different projects I need to finish by Friday.  A working Solution would be greatly appreciated. First time having this problem in more than 40 years because I always make backups of everything but this one I can't find work on computers.

  Thanks in advance

  MrHappy082945

  Hi MrHappy082945

  All the XP drivers are available for the 5520 from the Acer support site.

  Click on "Drivers and manuals", type "Aspire 5520" (without the quotes) in the box. "" Then, select "Windows XP 32-bit" from the drop-down Opertating system.

  All your drivers & applications are here!

• Update statement w / Order By and other goodies

  It is a continuation of my previous post: Re: create the update with joint statement / select please see for table structure and sample data.
  
  OK, so this is based on my previous question SQL that has been resolved by you brilliant SQLers there. the code below will do exactly what I need it to do, but I wanted less user interaction:
  

  update offender_case_identifiers ociq
     set Identifier_type = 'ARN2'
   where ociq.offender_book_id in
        (select offender_book_id from v_header_block
          where offender_id_display = :ppid)
      and ociq.comment_text != :parn
     AND ociq.identifier_type = 'ARN'

  I wanted only the user having to enter in the ": pid" and have the script to take care of the rest. I found the best way to ensure that I find the most recent "RNA" of the offender_case_identifiers (which will then need to be set on ": bcyr ') is to run the following script:
  

  select oci.identifier_type 
  , vhb.offender_id_display
  ,oci.comment_text
  ,vhb.offender_book_id
  ,oci.offender_book_id
  from   offender_case_identifiers oci, v_header_block vhb 
  where 
  oci.offender_book_id = vhb.offender_book_id
  and vhb.offender_id_display = :ppid
  and oci.identifier_type like 'ARN'
  order by comment_text desc

  The code above was the original starting point for my last final SQL command, mentioned first in this post, however, I added the 'ORDER BY' the bottom of it. For additional examples of data, here is the result of the above statement:
  
  IDENTIFIER_TYPE OFFENDER_ID_DISPLAY COMMENT_TEXT OFFENDER_BOOK_ID OFFENDER_BOOK_ID_1
  RNA * 0000382183 * 01550228 * 1 011 683 * 1 011 683
  RNA * 0000382183 * 01550228 * 1 011 683 * 1 011 683
  RNA * 0000382183 * 01531810 * 823 281 * 823 281
  RNA * 0000382183 * 01531810 * 823 281 * 823 281
  RNA * 0000382183 * 01531810 * 823 281 * 823 281
  RNA * 0000382183 * 01531810 * 823 281 * 823 281
  RNA * 0000382183 * 01529717 * 804 301 * 804 301
  RNA * 0000382183 * 01525871 * 759 982 * 759 982
  RNA * 0000382183 * 01525871 * 759 982 * 759 982
  RNA * 0000382183 * 01516263 * 688 100 * 688 100
  RNA * 0000382183 * 01516263 * 688 100 * 688 100
  RNA * 0000382183 * 01516263 * 688 100 * 688 100
  RNA * 0000382183 * 01515789 * 682 680 * 682 680
  RNA * 0000382183 * 01510809 * 624 140 * 624 140
  RNA * 0000382183 * 01507681 * 590 261 * 590 261
  RNA * 0000382183 * 01507681 * 590 261 * 590 261
  RNA * 0000382183 * 01507681 * 590 261 * 590 261
  RNA * 0000382183 * 01484993 * 454 927 * 454 927
  RNA * 0000382183 * 01484993 * 454 927 * 454 927
  RNA * 0000382183 * 01484993 * 454 927 * 454 927
  RNA * 0000382183 * 01477592 * 448 231 * 448 231
  RNA * 0000382183 * 01477592 * 448 231 * 448 231
  RNA * 0000382183 * 01456544 * 428 902 * 428 902
  RNA * 0000382183 * 01456544 * 428 902 * 428 902
  RNA * 0000382183 * 01429778 * 403 175 * 403 175
  RNA * 0000382183 * 01427677 * 401 055 055 * 401
  RNA * 0000382183 * 01427677 * 401 055 055 * 401
  RNA * 0000382183 * 01427677 * 401 055 055 * 401
  
  I therefore, as you can see, the query to select the recording of top/1 St 'Comment_Text' in the above results, and give it the ': bcyr ' WITHOUT inviting the user to enter. So I want the script to change all the other "Identifier_Type' to"ARN2"who do not share the first 'Comment_Text'... so in this example, I want all the"RNA"replaced by"ARN2"who do not have 'Comment_text' = 01550228.
  
  
  I hope that's not too complicated, because it is to me. Thanks in advance for any assistance.

  Hello

  If you have a query that displays all rows, and you want to UPDATE the lines in this updated reuslut who do not have the highest value of comment_text. You can use the analytic DENSE_RANK function to number the separate comment_texts and then throw the lines that have been assigned to #1. the rest will be those you wqant to UPDATE.

  Here's a way to do it:

  UPDATE     offender_case_idetifiers
  SET     identifier_type     = 'ARN2'
  WHERE     (offender_book_id, comment_text)
       IN (
              WITH    got_r_num    AS
              (
                  SELECT  vhb.offender_book_id
               ,        oci.comment_text
               ,        DENSE_RANK () OVER (OREDER BY oci.comment_text  desc)
                               AS r_num
               FROM    offender_case_identifiers oci
               ,         v_header_block           vhb
               WHERE   oci.offender_book_id      = vhb.offender_book_id
               AND         vhb.offender_id_display   = :ppid
               AND        oci.identifier_type           = 'ARN'
              )
              SELECT  offender_nook_id
              ,       comment_text
              FROM    got_r_num
              WHERE   r_num     > 1
          )
  AND     identifier_type     = 'ARN'
  ;
  

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and also publish outcomes from these data.
  If you ask on a DML statement, such as UPDATE, the sample data will be the content of the or the tables before the DML, and the results will be the State of the or the tables changed when it's all over.
  Explain, using specific examples, how you get these results from these data.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).
  See the FAQ forum {message identifier: = 9360002}

• Satellite P200-1DY: need XP drivers - LAN, SM bus and mass storage controller

  I have a Satellite P200-1DY running XP - SP2. Where can I find the drivers for Ethernet, storage of buses and the mass of SM controller controller?

  Are they 'hidden' in one of the drivers in one of the driver for XP Toshiba site list?

  How can I identify what version of laptop I have: PSPB0, B3, B6, etc. ?

  Oh. I have already answered in the other thread you posted here in the forum;
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=117816#117816

  Seems you've discovered what series it is ;)

  PS: the SM bus and mass storage controller are communities which are only compatible Vista and so drivers don't exist for the XP operating system

• Satellite P200 - need the drivers of SD card and Win7 Tochpad player

  Hello everyone,

  I own a Satellite P200-1E9 PSPB3E and installed Windows 7 Professional 32 bit. All right, but I have 2 small driver problems.

  First: my touchpad works, but I can't scroll the text or on the internet! Where can I get the driver for the touchpad? Should which driver I use? I have to search for a driver, but can not find!
  Second: my SD card reader does not work. No drivers on the Toshiba homepage!

  I hope you can help, thx :-)

  Hi clemensgroh,

  In your case, I'll try the Vista drivers. I did the same and they worked for me. You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  There you can get the Flash Media Driver and Touchpad driver. :)

• Equium M40X: Need XP drivers for card reader and Lan

  I reinstalled xp on my laptop and came on the Toshiba site for drivers, but I can't find a card reader and the LAN does not seem to work.

  Any ideas where I can find these drivers.

  Hello

  The European driver Toshiba page provides all the necessary XP drivers for Satellite M40X.
  I found the driver v 1.0.3.1 Cardbus and the Realtek LAN driver v5.612.628.2004 for XP.
  So I really don't understand why you are not able to find these two XP drivers.

  They are there.