Needs inventory of local network VIRTUAL the virtual computer for each network adapter

Similar Questions

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Loading the default limits for each execution

  Hello

  My situation is like this:

  I spend my sequence using the sequential model. Usually, the sequence is executed, 'in the loop', which means that when once the sequential model is launched, we can test unit after unit until we want to put an end for some reason any. The sequence is load dynamically by the sequential model and download after executing the step to discharge option.

  In the sequence, we use limits. Default TS limits similar to below.

  

  All our limitations change during execution depending on what unit we test and on what stage is the unit.

  Problem:

  I thought that if the sequence is loaded dynamically, it is unloaded when executing the next time that the next unit will be tested the default values of the container limits will be charged (in response to being dynamically loaded and unloaded at the step which called the main sequence is executed). Unfortunately, it seems that when we realize continous test the test limits have not returned to the default value, as expected, but they are a superposition of the limits assigned by previous executions. Of course

  Issues related to the:

  1 are my expectations about the behavior of TS are correct?

  2. how to impose default deadline to be 'reset', the default value for each run of the sequence, not only the first execution of sequential model?

  MimiKLM wrote: I am worry the speed of loading, you talked about associated to your solution, but potential problems with memory. Let say, I called the main sequence of 1000 times without breaking execution. So instead of having one copy of the sequence called with wiped/reset all variables and properties I have 1000 copies in the memory. I would call it a waste to have 1000 copies only because I need to have the properties and variables deleted.

  The copy exists only during the execution of the sequence. Once the execution of the sequence is complete, the copy will be destroyed/released. At least as long your code modules do not hold their own reference to it somewhere (which generally do not do).

  If you call from the main sequence 1000 times in a loop, you must still do not have a runtime copy into memory at once. The difference is a new copy is created (and destroyed once that the sequence is made running) each time, rather than create a copy only once and reuse. There is a performance hit in this call of your sequence which is somewhat proportional to the size of your sequence, but unless your sequence is really huge, or test you execution is extremely fast, you probably won't see the difference.

  Hope this helps to clear things up,

  -Doug

• Is it possible to draw the same color for each curve automatically

  Hello

  Is it possible to draw the same color for each curve automatically. I use graphic XY basis with data set.

  Lol you'll either need to set the properties through the dialog box.  Or use the nodes property of the graph to adjust the Active plot and then set the color of the plot.  This can be done in a loop For.

  

• How to perform several steps and the display of charts/indicators without repeating the same code for each entry (of the dozens of entries)?

  I have to repeat the same steps and display in the Panel before (graphic fft and other indicators).

  Do I need to repeat the same code for each entry/channel? I already have too many channels and whenever I change a measure (and code) for an input/channel, I have to repeat the changes to all the other entries.

  Thank you

  
  

• How to find the child level for each table in a relational model?

  Earthlings,
  
  I need your help, and I know that, "Yes, we can change." Change this thread to a question answered.
  
  So: How to find the child level for each table in a relational model?
  
  I have a database of relacional (9.2), all right?
  

  .
       O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
      /↑\ Fks
     O"O O" <-- level 2 for first table (circle)
    /↑\ Fks
  "o"o"o" <-- level 1 for middle table (circle)
     ↑ Fk
    "º"

  Tips:
  -Each circle represents a table;
  -Red no tables have foreign key
  -the picture on the front line of tree, for example, a level 3, but when 3 becomes N? How is N? That is the question.
  
  I started to think about the following:
  
  First of all, I need to know how to take the kids:

  select distinct child.table_name child
    from all_cons_columns father
    join all_cons_columns child
   using (owner, position)
    join (select child.owner,
                 child.constraint_name fk,
                 child.table_name child,
                 child.r_constraint_name pk,
                 father.table_name father
            from all_constraints father, all_constraints child
           where child.r_owner = father.owner
             and child.r_constraint_name = father.constraint_name
             and father.constraint_type in ('P', 'U')
             and child.constraint_type = 'R'
             and child.owner = 'OWNER') aux
   using (owner)
   where child.constraint_name = aux.fk
     and child.table_name = aux.child
     and father.constraint_name = aux.pk
     and father.table_name = aux.father;

  Thought...
  We will share!
  
  Thanks in advance,
  Philips
  
  Published by: BluShadow on April 1st, 2011 15:08
  formatting of code and hierarchy for readbility

  Have you looked to see if there is a cycle in the graph of dependence? Is there a table that has a foreign key to B and B has a back of A foreign key?

  SQL> create table my_emp (
    2    emp_id number primary key,
    3    emp_name varchar2(10),
    4    manager_id number
    5  );
  
  Table created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create table my_mgr (
    2    manager_id number primary key,
    3    employee_id number references my_emp( emp_id ),
    4    purchasing_authority number
    5* )
  SQL> /
  
  Table created.
  
  SQL> alter table my_emp
    2    add constraint fk_emp_mgr foreign key( manager_id )
    3         references my_mgr( manager_id );
  
  Table altered.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1   select level lvl,
    2          child_table_name,
    3          sys_connect_by_path( child_table_name, '/' ) path
    4     from (select parent.table_name      parent_table_name,
    5                  parent.constraint_name parent_constraint_name,
    6                  child.table_name        child_table_name,
    7                  child.constraint_name   child_constraint_name
    8             from user_constraints parent,
    9                  user_constraints child
   10            where child.constraint_type = 'R'
   11              and parent.constraint_type = 'P'
   12              and child.r_constraint_name = parent.constraint_name
   13           union all
   14           select null,
   15                  null,
   16                  table_name,
   17                  constraint_name
   18             from user_constraints
   19            where constraint_type = 'P')
   20    start with child_table_name = 'MY_EMP'
   21*  connect by prior child_table_name = parent_table_name
  SQL> /
  ERROR:
  ORA-01436: CONNECT BY loop in user data
  

  If you have a cycle, you have some problems.

  (1) it is a NOCYCLE keyword does not cause the error, but that probably requires an Oracle version which is not so far off support. I don't think it was available at the time 9.2 but I don't have anything old enough to test on

  SQL> ed
  Wrote file afiedt.buf
  
    1   select level lvl,
    2          child_table_name,
    3          sys_connect_by_path( child_table_name, '/' ) path
    4     from (select parent.table_name      parent_table_name,
    5                  parent.constraint_name parent_constraint_name,
    6                  child.table_name        child_table_name,
    7                  child.constraint_name   child_constraint_name
    8             from user_constraints parent,
    9                  user_constraints child
   10            where child.constraint_type = 'R'
   11              and parent.constraint_type = 'P'
   12              and child.r_constraint_name = parent.constraint_name
   13           union all
   14           select null,
   15                  null,
   16                  table_name,
   17                  constraint_name
   18             from user_constraints
   19            where constraint_type = 'P')
   20    start with child_table_name = 'MY_EMP'
   21*  connect by nocycle prior child_table_name = parent_table_name
  SQL> /
  
         LVL CHILD_TABLE_NAME               PATH
  ---------- ------------------------------ --------------------
           1 MY_EMP                         /MY_EMP
           2 MY_MGR                         /MY_EMP/MY_MGR
           1 MY_EMP                         /MY_EMP
           2 MY_MGR                         /MY_EMP/MY_MGR
  

  (2) If you try to write on a table and all of its constraints in a file and do it in a valid order, the entire solution is probably wrong. It is impossible, for example, to generate the DDL for MY_EMP and MY_DEPT such as all instructions for a table come first, and all the instructions for the other are generated second. So even if NOCYCLE to avoid the error, you would end up with an invalid DDL script. If that's the problem, I would rethink the approach.

  -Generate the DDL for all tables without constraint
  -Can generate the DDL for all primary key constraints
  -Can generate the DDL for all unique key constraints
  -Can generate the DDL for all foreign key constraints

  This is not solidarity all the DOF for a given in the file object. But the SQL will be radically simpler writing - there will be no need to even look at the dependency graph.

  Justin

• get the maximum number for each group

  Hi, I am a newbie and work on a project for school. I worked this problem for a few days and made a bit of progress.
  I have two tables, student and register for a database of the College. I need to show students that have the most entries into each large. So far, I have:
  
  WITH COUNT_Q AS
  (
  SELECT B.SSN, B.MAJOR, COUNT (A.CLASS_NO) AS COUNTCLASS
  TO REGISTER A, STUDENT B
  WHERE A.SSN = B.SSN
  B.SSN GROUP, B.MAJOR
  )
  
  SELECT MAX (COUNTCLASS), MAJOR
  OF COUNT_Q
  GROUP BY MAJOR
  ;
  
  I get the correct results, but need to introduce the SSN and the Major of the studens. When I add in the SSN and major, as below, I get too many files.
  WITH COUNT_Q AS
  (
  SELECT B.NAME, B.SSN, B.MAJOR, COUNT (A.SSN) AS COUNTCLASS
  TO REGISTER A, STUDENT B
  WHERE A.SSN = B.SSN
  B.NAME, B.SSN, B.MAJOR GROUP
  )
  
  SELECT *.
  OF COUNT_Q
  WHERE (COUNTCLASS) IN (SELECT MAX (COUNTCLASS)
  OF COUNT_Q
  GROUP BY MAJOR
  )
  ;
  
  Can someone point me in the right direction?

  SELECT  B.NAME,
          B.SSN,
          B.MAJOR
    FROM  (
           SELECT  B.NAME,
                   B.SSN,
                   B.MAJOR,
                   COUNT(A.CLASS_NO) SSN_MAJOR_COUNTCLASS
                   DENSE_RANK() OVER(PARTITION BY MAJOR ORDER BY COUNT(A.CLASS_NO) DESC) RNK
             FROM  ENROLL A,
                   STUDENT B
             WHERE A.SSN = B.SSN
             GROUP BY B.NAME,
                      B.SSN,
                      B.MAJOR
          )
    WHERE RNK = 1
  /
  

  SY.

  Published by: Solomon Yakobson, March 27, 2011 18:53

• Select the last value for each day of the table

  Hello!
  
  I have a table that contains several measures for each day. I need two queries on this table, and I'm not sure how to write them.
  
  The table stores the rows (sample data)
  

  *DateCol1                 Value       Database*
  27.09.2009 12:00:00       100           DB1
  27.09.2009 20:00:00       150           DB1
  27.09.2009 12:00:00       1000          DB2
  27.09.2009 20:00:00       1100          DB2
  28.09.2009 12:00:00       200           DB1
  28.09.2009 20:00:00       220           DB1
  28.09.2009 12:00:00       1500          DB2
  28.09.2009 20:00:00       2000          DB2

  Explanation of the data in the sample table:
  We measure the size of the data files belonging to each database to one or more times a day. The value column indicates the size of the files of database for each database at some point (date in DateCol1 European model).
  
  
  What I need:
  Query 1:
  The query must return to the last action for each day and the database. Like this:

  *DateCol1       Value      Database*
  27.09.2009        150          DB1
  27.09.2009       1100          DB2
  28.09.2009        220          DB1
  28.09.2009       2000          DB2

  Query 2:
  The query should return the average measurement for each day and the database. Like this:

  *DateCol1       Value      Database*
  27.09.2009       125          DB1
  27.09.2009      1050          DB2
  28.09.2009       210          DB1
  28.09.2009      1750          DB2

  Could someone please help me to write these two queries?
  
  Please let me know if you need further information.
  
  Published by: user7066552 on September 29, 2009 10:17
  
  Published by: user7066552 on September 29, 2009 10:17

  Why two queries when it suffice ;)

  SQL> select dt
    2       , db
    3       , val
    4       , avg_val
    5    from (
    6  select dt
    7       , val
    8       , db
    9       , row_number () over (partition by db, trunc (dt)
   10                                 order by dt desc
   11                            ) rn
   12       , avg (val) over (partition by db, trunc (dt)) avg_val
   13    from test)
   14   where rn = 1
   15  order by dt
   16  /
  
  DT        DB           VAL    AVG_VAL
  --------- ----- ---------- ----------
  27-SEP-09 DB2         1100       1050
  27-SEP-09 DB1          150        125
  28-SEP-09 DB2         2000       1750
  28-SEP-09 DB1          220        210
  

• How can I make the individual work for each song on a compilation album of show when I browse my playlists?

  I get a lot of my music from Soundcloud where individual songs are released by artists often with none of the albums.

  So, when you add these songs on iTunes I the name of the album for each of them SoundCloud despite the fact that each of them have different names track/artists/works of art.  When I select the option to indicate that the song is part of a compilation album, even if the individual work remains in each song and shows when I play the song, looking at my playlists, songs from my compilation album of SoundCloud will only show album art compilation rather than the individual works for each song.  How can I my iTunes will show that each individual work?

  You can't while retaining spacing as part of this same album. If you want each art individual to show then tracks them to a unique combination of the album title and album artist. If the tracks are underway on an older iPod then the tracks on the album must be unique.

  TT2

• Windows 7 - enable the display settings for each folder: folder options, "save the display settings for each folder".

  Hello.

  Any one out there know how to activate the display settings for each folder in WINDOWS 7?

  I'm especially interested in adjusting the size and the location on my screen.  A few days earlier, before moving to Windows 7: I could open a file, place and size where I wanted, and when I opened it again, presto!, even spot and size.

  I've seen several posts of users seeking to turn this feature off.  I'm looking forward in opposition.   I would like to than windows "remember each folder view settings.  This particular configuration seems to no longer be available in Windows 7, screenshot attached:

  Thank you for your time and your interest.

  Best regards

  Fernando

  Have you tried the solution here:

  "The changes in the size, view, icon or a file are lost.

  <>http://support.Microsoft.com/kb/813711/en-us >

  HTH,

  JW

• Is their any restrictions on the total facilities of cloud creative app after purchase of the monthly subscription for each user?

  Is their any restrictions on the total facilities of cloud creative app after purchase of the monthly subscription for each user? For example, an application may not be installed on more than 1 computer. (Or it will break the policy of licensing or software etc.) ?

  1. You can install the software on as many computers as you want
  2. You can activate the software to be used on a maximum of any two computers at the same time
  3. You can only use one of the simultaneously active installations.

• Looking to download a track from cc App and then install it on the personal computer for offline use. Is this possible?

  Looking to download a track from cc App and then install it on the personal computer for offline use. Is this possible?

  Yes, download Adobe Creative Cloud apps | CC free trial Adobe

  but you have to be online to install applications.

• Export the configuration information for each group

  How to export the configuration information for each group? (I want to see the information that this group has read or write access to the cube XXXXX)

  By LCM, I was able to export information on groups and users. But no information about its commissioning. can any body tell me how can I get the configuration of shared services information

  We have a utility to do this, or can we get this information using LCM?

  Any information about him will be useful

  Thank you

  The commissioning is under Application groups > Foundation > Shared Services > native Directory > assigned roles > then choose the product / app

  There is a utility command line available if you want to automate the process of execution of export - Oracle Hyperion Enterprise Performance Management System Lifecycle Management Guide, you create the definition of migration file but which can be done by running an export.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• by selecting the second result for each client...

  Hello
  
  I have a table that contains all the contacts that we have with our customers.
  We consider a file active file from the moment where there was 2 contacts for this customer.
  Today someone asked me "can you tell me how many new customers with an active file, we have this year."
  
  So what I really want to do now is make a view that contains the DATE of the SECOND CONTACT for each CLIENT_ID.
  
  the table looks like this:
  CONTACT_ID
  CLIENT_ID
  DATE
  CONTACT_FORM (any in this story)
  REMARKS (any in this story)
  
  Can someone help me with this please?
  
  Thanks in advance for your answers.
  
  L
  
  change I don't know how to make an opinion, which is not the problem :) in this case only the query select to make the problem there.
  
  Edit 2 I made a small example
  
  If I start with the data in this table:

  CLIENT_ID || DATE           .... other columns here...
  436     || 01-02-2011
  328     || 05-04-2011
  319     || 13-01-2011
  220     || 03-09-2011
  319     || 17-12-2011
  220     || 25-11-2011
  436     || 01-04-2011
  436     || 01-04-2011

  that vision must end up with:

  CLIENT_ID  || DATE_OF_SECOND_CONTACT
  436     || 01-04-2011
  220     || 25-11-2011
  319     || 17-12-2011

  (works with version 11.2.0.1.0)
  
  Published by: 901981 on 13-dec-2011 02:16

  If you do something like

  SELECT CLIENT_ID, date_column
  FROM (
  SELECT client_id, date_column, row_number() over (partition by client_id order by date_column asc) AS CONTACT
  FROM YOUR_TABLE)
  where contact = 2
  /
  

  HTH

  Roger

  Published by: Roger on December 13, 2011 02:19

• Adding column which gives the serial number for each line in the Bulletin Board

  I use the update version 2 Jdev 11 g.
  I'm the filling of all employees from the emp table ADF table.
  My requirement is to add a column more as the first column and header line which displays the serial number for each serial number of row.the is not available in the table emp in database .i want to generate it dynamically when the data are filled in to ADF table.i don't want not to use the method to get the SQL query rownum. I want to get custom code (in the Managed Bean) or set all of the properties in the subject entity or any other object.
  
  Published by: sj0609 on September 8, 2009 09:43

  Hello

  Give an id to the table (say 'currRow') varStatus property. Add a column to the table (for example with a text output), then set it to the value of the output text #{currRow.index}.

  Arun-