NEITHER Vision Builder, acquire Images with fake delivery

Similar Questions

• Cannot acquire image with NI1744 using the interface configuration of Vision Builder AI 2011: error-1073774588

  I use a 1744 OR with NI Vision Builder AI 2011. When I'm in the interface of the inspection, the camera will acquire and display an image. When I go to the configuration interface and try to put in place the stage of image acquisition, I have error-1073774588: the undefined error. I sometimes also 1074396159 error: not enough memory.

  Thank you for your repply Burrito.

  The problem was sloved and two errors went away after I formatted the camera and reinstalled the software on the camera.

• NEITHER Vision Builder built exe does not have logging.

  Hello!
  I did have an application with NI Vision Builder, and the executable version does not save the log file. During the test it or vision, she recorded when I migrate to labview it records, but when I build the executable file, which does not have logging. What could be wrong?

  Thanks for your replies, the solution was easier than I thought. There is no problem with the path or something like that. The problem is that I checked the box for "Log in the background", and (I think) it is not a program, which could run this step. So I unchecked that and now it creates the log file that I wanted to.
  Once again, thank you for your quick response!

• NEITHER Vision Builder to tiara

  Hello NOR the community.

  I built a system to measure through NI Vision Builder. Now I can record the measured data (only!) in a *.csv or *.txt file.

  I want to import the data measured in DIAdem automatically.

  Is there a better way to do it? Is there a direct Interface between the 2 software systems?

  Thanks in advance!

  Hi Steffen,

  When you install DIAdem you are also automatically installing a separate program, called "My DataFinder", which is a database and indexing service.  The tiara and "My DataFinder" use the DataPlugins even index of load/data files.  When you complete a session of text use wizard, it creates and registers a use in addition to load the data file into the data portal in DIAdem.  The idea is that eventually DIAdem both the DataFinder can use the use that you created for the load index / all similar data files.  In practice, the use you get from the Assistant is often not ideal for use with a variety of similar data files.

  My initial inquiries indicate that ASCII files, you are already creating the best leads that we have between Vision Builder and tiara.  The marketing director of DIAdem is now advocating for options in future versions of Vision Builder who could provide a superior connection.  For now, however, I think our best bet is to outfit you with strong DataPlugins which will provide drag & drop of loading in the NAVIGATOR tiara as well as automatic indexing to the DataFinder database.

  So, could you post some of the ASCII files you created with Vision Builder?  I would be willing to create a use or a set of DataPlugins that should give you the basic data functionality and connectivity you are after with DIAdem.  Or you could send to [email protected]

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• NEITHER Vision Builder: calculate the orientation of the component compared to the first image in degrees

  Hi all

  I have a question about a component of an aircraft. There are 9 images of the component with and without defects. I want to pray for some indications calculate the orientation of the item to the first image in degrees *.

  Any advice will be appreciated gratefully.

  Thank you guys

  PS: If you would like more details, please let me know and I will extend my post.

  
  

• Prosilica GigE GC750C Camera do not acquire images using software of NOR

  We recently had a camera Prosilica GigE to GC750C. After activating the camera, Jumbo packets is recognized and acquires images with the help of allies Sample Viewer. The camera is also recognized by the NI Vision Assistand and MAX. But trying to acquire images results in the error message attached. I would be very grateful for any help.

  Best regards

  Benjamin

  Operating system: Windows 7, 64 bit

  Firewall disabled; Jumbo packets enabled

  Allied Sample Viewer 1.24

  NEITHER Vision Assistant 2010 (build 20100621052956)

  OR Max 4.7.2

  Benjamin UB says:

  Thank you much for multiple responses.

  The AVT UniCam Version 1.1.3.0 allies and Allied SampleViewer Version 1.24 buy images correctly. This is why I can't imagine that a firewall might be interfering. Also affecting the packet size to 1500 Max only has not solved the problem. Any other ideas?

  Hi Benjamin,

  If you use a software firewall, there are actually quite a few reasons that a piece of software can acquire, but the other may not. Software can set different layers to the network stack and the behavior can be very different. In my view, both software places AVT can reach are either user-mode (in which case the firewall software can easily be configured based by application to let traffic through) or as a network filter driver based on the core (which lies below the firewall, so it is not affected by the latter). If IMAQdx, two locations, it can attach to the network stack are either in kernel mode talk to the TCP/IP stack (above the firewall) or as a driver miniport directly above the hardware and below the firewall (if you have an NI GigE Vision card or one that is compatible with the Driver OR High Performance).

  New versions of the GigE Vision standard has a new feature that make the Protocol more 'user-friendly' firewalls. Our next version of IMAQdx (which I think should be on the web every day now) has support for this new feature. We tested the new AVT cameras and it is supported as well. This should be the firewall issues such less problems.

  Eric

  Eric

• vision builder to labview migration

  Hello

  I have a project of vision. Pluggable VISION BUILDER pour image processing and the LabVIEW pour interfacing.

  My question is: how to call an inspection done by VISION BUILDER in the LabVIEW software.

  NB: I found in the Tools menu of VISION BUILDER a feature titled "Migrating to LabVIEW. but she could not be executed because I don't own

  the DEVOLEPMENT VISION MODULE. Have to buy another software OR (VISION DEVOLEPMENT MODULE) pour fix my problem? : smileysurprised:

  Thanks in advance

  Hello

  Vision Builder is provided with an ActiveX control that you can call from LabVIEW. You will find enclosed a few Directory promotion the in examples

  \

  The ActiveX component allows to control Vision Builder as you would you interface greengrocers. Once you have created your inspection in Vision Builder, you can use the ActiveX component to connect a Vision Builder of LabVIEW, open an inspection, execute, recover and display the image (you need not purchase the Vision Development Module pour it), and get the results of inspection and each step of the inspection.

  Hoping that this answer has your expectation

  Kind regards.

  Christophe

  OR R & D Vision

• Control of a system of engine not to not 2 - axes of Vision Builder

  Hello

  is there a way to control 2 Motors step by step via Vision Builder?

  What are the components do I need?

  BR,

  Klaus

  Hello knuemm,

  There is no action, which allows to directly control the player. It depends on your hardware configuration, some engines step by step has a serial interface and also the device the vbai is running on other devices of movement has a digital input and some vbai devices have outputs digital that may be used for this.

  Fleeing a LabVIEW VBAI Inspection

  I followed the smartcam NOR control pilot Motion

  You can also create steps for the VBAI to run LabVIEW code

  NEITHER Vision Builder HAVE Development Toolkit

• How to create own IDE for LABVIEW (such as vision builder)

  Hi all

  My pretty funny question, I know that.

  I like to create Labview Application IDE like Vision Builder.

  How to do this?

  As far as I know that Vision Builder is developed with LabVIEW, the source code of course is not public... But why do you want to create a new IDE for LabVIEW? LabVIEW is an IDE, no?

  I think also Vision Builder uses a lot of scripts and sub-panels, I can't help you much more than that.

  For us - outside NI - script cannot be used in an EXE file, they reserve that for their applications not it will be a difficult task.

• Continuous imaging using vision builder

  Hello, I use NI 1744 and want to know how to get and record continuous images using Vision Builder. I am in a position to acquire and maintain a single image but cannot acquire continuous images.
  Looking forward for your help.

  Bürki,

  You try to save the images continuously as a movie?  This is not supported in VBAI, however if you want to align continuous images individually you can try to change your pattern of State inspection to repeat your current inspection and the transition to the stage stop only after that your current inspection was conducted a defined number of times.

• I can't create an installer, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  I can't create an installer on LabView, after install the Vision Builder demo and then uninstall it. I can't create a Labview Installer more, he asks me an installer of generator of Vision, even if Labview my program does not have nothing to do with it...

  Hi, Shada, this can happen if you include additional installers to your installer for example DAQmx. When you do this the installation program must include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder he updated MAX, so when your Installer try to understand MAX, his request the source where it was installed in your computer in this case Vision Builder.

  Here you can cache information so it is not asked once again, or you can download a version more recent fo DAQmx, then it will update MAX and change the dependecy.

  You can find more details about it in this KB:

  3S88PJMY knowledge base: why do I get an error message 'Missing Distribution' when you try to build an install...

  And to keep a copy, here's more information:

  How to stop missing delivery Notification whenever I build an installer?

  Best regards

• How can I import an image with transparent background .png in the Vision Assistant?

  Hello

  I am using the Vision Assistant of NOR. Here, I want to overlay one existing image with another. Therefore, I use the overlay Installer where can I import a .png image. If I do, I don't get

  the transparent background of the back of the image, even, I was saved with a transparent background. The image is displayed with an orange background.

  If I import the same image to any front panel for example, I see the picture on the right path with a transparent background. What I've done wrong? I have attached the image I want to use.

  Thank you

  Hello! Don't know how to do this in the Vision Assistant. Try to use the overlay (bitmap) or convert your image into mask. Effect of transparency not supported in the Vision. What you can do in LabVIEW is something like this:

  

  

• The DALSA X 64 - YEAR QUAD Framegrabber is compatible with Vision Builder AI 3.6

  Hello

  I think use the DALSA Framegrabber with 4 camera inputs. I was just wondering, if this framegrabber is compatible with the Vision Builder AI 3.6?

  Thank you

  The only framegrabbers directly supported by VBAI that are produced by National Instruments, see http://sine.ni.com/nifn/cds/view/main/p/sn/n32:frameGrabber / lang/en/nest/1286/ap/vision.  If your application requires three or more cameras, I would suggest using a pair of PCIe-1430 framegrabber with Camera Link cameras, PCIe-8235 with cameras GigE or using a firewire camera configuration.

  -Robert

• Is the module vision development in labview 8.6. sufficient for acquiring images in real time and analysis using a webcam

  Hello

  I'm new to labview and trying to develop a system of eye tracking using labview 8.6. He has the vision development module, and I was wondering if this was not enough for the treatment and real-time image acquisition or could I need other software tools.

  Yes, to acquire images from a webcam, you need drivers imaq-dx.

  Take a look at this link:

  http://digital.NI.com/public.nsf/allkb/0564022DAFF513D2862579490057D42E

  Best regards

  K

• How can I move an image with info vision?

  Hello

  I'm trying to move an image that has been saved as .png with info vision. This image I would change in x / y pixels. If I do, I get a

  blank image back, even I copied all the info of the image in advance.

  If I use any other image without info vision that it works without problems so far. Anyone know how I can fix this problem?

  Thanks in advance

  The Shift IMAQ function does not read the header information and don't know your reticle.  You can add header information to the image by using the merge feature overlay IMAQ as shown in my picture as an attachment and function Shift IMAQ will actually see these data.