Neo, whats up with that sort of thing Matrix?

Similar Questions

• My Airport extreme and Time Cap. both lasted 14 months, what happens with that. Time to change brands?

  My last two routers in Apple both lasted 14 months more I had an arrival of DAO. Of course, both just went out of warranty. My current A.E. seems must be reset to zero every day even if it is shows that it works, my devices loose their connection. Rebooting solves the problem for a short period. Hard and soft resets it have done and that does not help.  Now, the yellow light flashes and the utility Airport says that it may be overheating. I just it's time to change brands.

  Your Apple router is covered by the Applecare, extended warranty on a computer, ipad, or apple TV.

  The program is quite generous... you can buy an apple TV now (Gen3 is fine) and buy on what is cheap apple care. It covers all airport bought up to 2 years earlier. So take your defective AE at the apple store... Buy Apple TV and its applecare... do not open the Apple TV... Get your replaced AE... Then, get a refund on your Apple TV. It's a little sneaky, but only if you don't have applecare...

  In the European Union or many other countries... There are in your laws of the consumer that Apple must meet the provisions of warranty... And 14 duration of life is not good enough.

  There are many problems with the current series of AE and TC.

  Constantly wireless of does not... power outages of power.

  My first TC was like yours... not quite DOA, but it was defective out of the box and lasted a week total.

  Secondly, one was poor wireless. My oldest Gen5 AE and Gen4 TC have been much faster.

  Third go was very well. (At least on this point).

  If you want something better watch the top selections here. You will find the AE list... a long long way down.

  http://www.SmallNetBuilder.com/tools/charts/router/bar/113-5-GHz-DN-c

• Thunderbird is save messages sent with a date 3 days in the future, what is with that?

  I noticed this morning that an email I sent from another computer yesterday, 05/28/15, in the afternoon around 16:00 sitting in my inbox sends file dated 05/31/15. Today 29/05/15. What's new? I'm under TB 31.7.0 in Windows 7.

  have you checked the date information, time and time zone of the computer that you used to send the mail?

• Adobe Bridge icon is everywhere, what is with that?

  I literally hundreds and hundreds of [Adobe Bridge icon], with the following text: Adobe Bridge Cache .bc or .bct...

  These are everywhere imaginable, open a folder and see them. They are in the most unlikely places that have no relation to photoshop at all. Icons are usually paired with the .bc and one with the .bct

  I always screw up their, it does not affect anything, nothing does not change, or happens by. But, it is very annoying, there may be long strings of them especially in the folders of photos. They can & appear no part/everywhere, but usually only in pairs, in or outside the subfolders but finally in a folder. Not sure, but come to think of it, they may appear on the desktop periodically. Also, when I trash them they always seem to reappear more later... maybe not all but most-

  Is there a way to stop this?

  I'm under Ps CS2

  My system: 17 "iMac G4: 1.35 GHz, 1 GB of SDRAM, 80 GB HD, 200 GB Maxtor Ext.HD, Leopard 10.5.8.
  * XLR8 MAChSpeed G4 7457 CPU + 512 Cache *.

  This has nothing to do with Photoshop. These files are bridge cache files. In CS2, there is an option to use a Central or distributed cache. Looks like you have the selected Distributed option.

  [From: http://www.adobepress.com/articles/article.asp?p=483796]

  By default, Adobe Bridge stores its cache in a central location. To make the more robust cache, you can choose the option to use Distributed Cache files when Possible in the bridge's Advanced Preferences dialog box. When this option is selected, bridge stores the cache for each file in this folder. This makes the cache more robust and eliminates the need to export the cache before burning a CD or DVD. However, this creates a pair of cache files in each folder. They are normally hidden, but you can view if you choose the command view > show hidden files. There are other caching options in the submenu of the Tools menu Cache and in the Advanced preferences in bridge.

  Kind regards

  Steve

• I downloaded and installed it and TB preconfigured mailbox of my wife rather than create a new one for me. Whats up with that?

  I downloaded and installed it and TB preconfigured mailbox of my wife rather than create a new one for me.
  The first time I ran it, there was his box mailbox and all the msg I whatever it either has no entry for a server, the login or password. IOt just configured everything to his mailbox! He did this IP address or what?

  Network, what type of network? you have a server?

• Live chat is supposed to be opened 2-4 Thursday. The time now is 03:20! What is with that?

  When is live chat? Thursday at 3:30 and I track for the last hour and a half, and it remained closed. Better yet, how can I stop "scores.htm" Download streaming when I go to Google homepage with the part of my profile sport scores gadget?

  This has happened

  Each time Firefox opened

  Today is Thursday, 15 July, 15:30,

  The time on the Live Chat page all indicate "PDT"; It's daylight savings time Pacific. If you are not on the West coast of the United States, you will need to adjust the time accordingly.

• When I bought iTunes game it included radio, now it doesn't. Whats up with that, Apple?

  iTunes game includes more radio. Why not? I paid for a year.

  You don't talk to Apple. This is a user forum. iTunes radio is dead.

• How can I get only a few things that start on my computer instead of all sorts of things at once

  How can I get only a few things that start on my computer instead of all sorts of things at once

  Hello

  You can use these to control which startup programs. Many others who settle start-up are not
  really need to be there. As Acrobat Reader (Adobe), Agent of WinAmp and many others who
  load chunks of themselves to start more quickly (not a problem on the machines of today ' hui) and to make sure that they
  can control the files they support (to be sure that you continue to use only). Those who are not common
  examples and not meant as a slam on these programs very well.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  -------------------------------------------------------------------------

  Performance and maintenance tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• What happens with the app that I do not install now?

  What happens with the app that I do not install now? It will be available 1 year from the moment I am installing? Because I only need to photoshop and Illustrator now, but next year, I will work with inDesing. I have not yet installed inDesign and wish that, when I install it the next year it will be available 1 year. I bought the cloud creative adobe and I only install Photoshop and Illustrator now.

  Thank you

  In addition:

  Membership begins when you buy instead during installation. All applications are on the same schedule and will expire and renew at the same time.

• I was told that I have to disable my account from my PC to add to another computer... I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  I'm trying to load another computer with CC, I was told that I have to disable my PC mine.  I did once before and lost a lot of my images from LR, suggestions on this please.

  I do the LR back ups system too.

  Thank you very much

  PAM

  Hi goaliemom

  There is no way to disable CC products. When you enable a CC product on another computer, simply connect to Creative Cloud.CC will ask you if you it will activate on more than 2 computers.

  I've done it before and I lost many of my images that were on LR.  No matter WHAT HELP with this please

  On the computer on which you will see that your images are not displayed?

  Catalog check the most recently used file > open recent in Lightroom

  Try opening a recent backup made on your newly added computer

  ~ Assani

• I installed and licensed non-cloud versions of Acrobat and Photoshop, which, after several months, asking me to connect and start my trial version online. What's up with that?

  I installed and licensed non-cloud versions of Acrobat and Photoshop, which, after several months, asking me to connect and start my trial version online. What's up with that?

  even if you do not have the cc versions, follow these tips. Creative cloud applications unexpectedly back in the test mode. CS6, CCM

• What is the unique sort key in vbscript?

  What is the unique sort key in vbscript?

  RRR OK. Imagine that you have a list of people which contains the full name and address of each person, amongst others, and that you want to search for a certain person.

  Now, if you are only looking for the name, something like(this is the sql syntax, btw), you will receive all of the people with this name. In this case, is a unique search key. A multi key consists of more of a search/sort field since using only a field returns no valid results. Like this:. Now you use a multi key to get the right person consisting of 2 fields name & address.

  It's the same thing with sorting it will begins the list of all the names people AND say something like:

  L1 A1

  N1 A2

  N2 A1

  N3 A1

  N3 A2

  and so on, where N = the name and address =.

  Hope this helps but if not related to Windows XP.

  There are a few good dev forums out there for that.

• How to prepare VMWare interview? What are resources that I can refer?

  How to prepare VMWare interview? What are resources that I can refer?

  Hrmmm... For what position?

  Honestly, as someone who has worked for the company for 8 years and joined with only the ability to spell virtualization (I had no idea who was this small start-up company called "VMware"), just be yourself and answer the questions to the best skills are the best way to go about it. More often than otherwise, the goal is to find someone who is part of a team and can work with a team without an ego. This company was founded on the desire and passion to help (at least in my experience).

  What I'd say is the following:

  1. be yourself

  2. don't be afraid to say that I don't know

  3. be honest (no, to be honest)

  4. do you have a vague idea of what we do together

  5 tell us what makes you great

  6. tell us what you need to work on things

  7. do you have the passion

  8. have the desire

  9. have fun

  10 ask. us what it looks like.

  Good luck!

• Built-in sort with Arrays.sort

  I have multidimensional array that contains a number as new arr int [10] [10] and that you want to sort according to the last column. Arrays.sort is a simple way to do it, but what happens if I don't want a real movement elements occur by Arrays.sort (arr [] []). Frankly, I'm interested in winning positions but not to grant the lines. Can I pass it arrange step because not interested in changing the original table? For the moment, I sort the table with Arrays.sort then index of table row and I fixed the position number pair. For example arr [0] has rank 1, arr [1] has the rank of 2 etc. If sorted according to the last column.
  
  Published by: totalnewby on May 23, 2011 22:51

  totalnewby wrote:
  I just need to know where the items would be positioned if they have been sorted. I made copy of the table at the moment and my program is successful, even if it takes a lot of time and additional memory to perform the copy because this table has billions lines in reality. If you can suggest less time-consuming solution do let me know.

  This is my standard example of how to do this sort of indirect.

   public static void main(String[] args) throws Exception
      {
          final Words words = new Words("/usr/share/dict/words");
          final List data = new ArrayList();
          for (int i = 0; i < 10000; i++)
          {
              String[] row = new String[10];
              for (int j = 0; j < row.length; j++)
              {
                  row[j] = words.getRandomWord();
              }
              data.add(row);
          }
  
          final Integer[] indirectIndex = new Integer[data.size()];
          for (int i = 0; i < indirectIndex.length; i++)
          {
              indirectIndex[i] = i;
          }
  
          final Comparator indexComparator = new Comparator()
          {
              @Override
              public int compare(Integer left, Integer right)
              {
                  int result = 0;
                  for (int i = 0; result == 0 && i < data.get(left).length; i++)
                  {
                      result = data.get(left).compareTo(data.get(right)[i]);}return result;}};
  
  Arrays.sort(indirectIndex, indexComparator);
  
  for (int i = 0; i < 100; i++){System.out.println(indirectIndex[i] + "\t" + Arrays.toString(data.get(indirectIndex[i])));}}
  
  You just need to create a Comparator for sorting the index array that uses the last entry in each row of real data array when comparing a row rather than all the row entries as I have done.