Nested Animations Invisible on stage

Similar Questions

• Nested animation (rotation in a spinning object)

  Hello

  I had an idea for a simple animation for a logo I want to produce. I use illustrator a bit, but I've never used before animation tools.

  I just downloaded a trial version of CC animate for 30 days. Is what I'm trying to figure out now how to make this nested animation:

  1. a word rotates 90 degrees (say: "Sphère") to its end point, the 'e '.

  2. at the same time inside this word the letter 'p' turns on its own-90 degrees on the Center WHILE following his position in the rotation above.

  Is this clear enough? If so amplifying me someone through this please?

  [PS: Why have I not or can not see a symbol of diamond for interpolation? All the latest tutorials I see that there is a symbol of diamond for animation effects...? ]

  Flanimate has always been a bit stupid on the "flip" animations The simplest solution is to insert two immediately adjacent interpolations in the Middle, taking the form of the starting position to almost zero positive height, then almost no negative height, then to the final position. Assignment - 100 acceleration at the first Bay and 100 acceleration to the last span will produce the most realistic result. As follows:

  o<-- height="" 100%="" (easing="">

  |

  |

  |

  |

  o<-- height="">

  o<-- height="" -10%="" (easing="">

  |

  |

  |

  |

  o<-- height="">

• Nested animation does not move on 'Play', but done on "test movie".

  I use Adobe Flash Pro CS6 12.0.0.481 Mac OS x 10.6.8 freshly installed in the last day - so I have not been juggling with preferences again.

  I use symbols nested for the animation of a bouncing ball. The deeper cymbal is the ball object itself ("ball"). The next symbol out is "bounceball" and it contains up-down animation. Finally, the scene itself contains the animation on the left right.

  If I change the scene, and I press Enter (or control > play) I just saw my ball moving in a straight line from left to right - I do not see the nested up-down movement. Case, however, I "Test movie" then I see the full animation up-down and right-left.

  I'm guessing there is a parameter or a property, do I need to change somewhere.

  Here is the file if anyone wants to look at themselves: http://DL.dropbox.com/u/7608731/ball2.fla

  Use the approach to test the animation.  Play/washing of the timeline will not play sub-un calendar as your nested and down from movieclip.  The option 'play' is more adapted to the timeline-based animations that live on a single scenario.

  If your nested animation is a graphic symbol instead of a movieclip, then you can get it to animate if you give it enough frames on the main spend management scenario.

• Nested Animation does not animate

  I try to learn the fundamentals of nested animations. I created 2 symbols vertically bouncing. They are in my library and can be viewed by the stop/play buttons.
  
  I put them in another scenario, set up 2 keyframes, and interpolation of movement with the symbol moving vertically. Now it should bounce up and down and across the screen. But it moves in all. The nested animation is not animate.
  
  Help appreciated,
  Wayne

  Hello

  Have you tried to test the movie? Looks like you are trying to watch the animation embedded within the Flash work environment. Test your animation by pressing Ctrl + Enter or go back to the control > test movie and you will see your animation.

  Unable to display nested animations (or animations in the movieclip symbols) of directly in the Flash interface. You must test the movie to see all animations.

• How to have 2 functions enter_frame that passes through one? I have a scene where I have an animated moving on stage film and I also want to have a custom cursor also go on stage on the same chassis.

  var mc_Dog1:WagDog = new WagDog();

  addChild (mc_Dog1);

  mc_Dog1.x = 50; I have this in my event ENTER_FRAME handler)

  mc_Dog1.y = 20;

  mc_Dog1.width = 140;

  mc_Dog1.height = 120;

  addEventListener (Event.ENTER_FRAME, dogMove);

  function dogMove(event:Event):void

  {

  If (mc_Dog1.x < (stage.stageWidth + 25)) {}

  mc_Dog1.x += 2;

  myCursor.mouseEnabled = false; The commented custom cursor is also a clip, I need this format as in my animated quiz that I also use to drag and drop)

  Mouse.Hide ();

  myCursor.x = root.mouseX;

  myCursor.y = root.mouseY;

  } else {}

  mc_Dog1.x = - 25;

  }

  }

  You can use one or two enterframe listeners.  for example,.

  (a) 1 earpiece

  this.addEventListener (Event.ENTER_FRAME, f)

  function f(e:Event):void {}

  F1();

  F2();

  }

  (b) 2 headphones

  this.addEventListener (Event.ENTER_FRAME, f1);

  this.addEventListener (Event.ENTER_FRAME, f2)

• animation frame-by-frame on top of symbols

  What I want to do, it is to animate a character by decomposing the body in symbols and using bones, but I want to animate frame-by-frame faces. Is it possible to apply an animation frame by frame (like blinking or smiling) loop at the top of a symbol (in this case the head) and be able to move this symbol around the stage that I ask the frame? Or will I have to attract executives, I ask the body? I'm still very new to the program and what you can tell me will be appreciated.

  Yes, you can nest as many symbols and animations you want.

  You can make the face into a symbol and in the face have several layers and symbols, including a symbol of mouth that you can run a loop as needed.

  This may be useful: creation of nested Animations > symbols animation in Adobe Flash Professional CC (2014 version)

  Also: Nested clips and the parent-child hierarchy

• Symbol animation does not play on the main timeline

  I created a ŒIL on the main stage and then transformed into a symbol of Clip and in that nested some cover eye movements and pupil. If setting it up like this:

  ŒIL

  -top cover

  -bottom cover

  -mask

  -student (student is also a symbol)

  -White

  Once the playback cursor reaches the image where the symbol of the ŒIL begins, the playhead moves through the timeline but any animation nested in a symbol is read. All I see is the static image of the first frame in the nested symbol. I thought that maybe I needed to extend the size of the layer of the EYE on the main stage and add more pictures. I added more pictures that the nested animation had actually and still no animation showed on the main timeline...

  Any thoughts?

  It is expected your wash / play timeline in the ide.  If you test, you should see the animation of your movieclip.

• playReverse the symbol that has nested symbols in order

  Dropbox - AE - TEST 3

  Hello

  Having a problem with the playReverse method. Basically, I would like to know if you can playReverse a symbol animation that nested symbol/animations?

  Above dropbox link is the project file.

  In the attached draft 3 Test, I have symbol called "animation-4-master. In this context there is 2 symbols, 'animation-4-start' and "animation-4" which play in sequential order."

  In the project, I have two theses keys 'BEFORE' and 'Backward'.

  What should happen is when you press the next button, the symbol/animation parent plays forward, play animations nested in the order, that is fine.

  When I do the opposite which is playReverse, the parent timeline goes to the end where it should, but then only plays the 2nd animation (animation-4) and he plays forward, not even back. The first nested animation (animation-4-start) do not even get played.

  I have inserted console.log markers to indicate points of 3 position both forward and reverse, so here goes, how do you know what makes the timeline.

  I can easily play each animation nested by itself since the reverse button, but I want to play the animation parent, in order to play the two animations embedded in the reverse order.

  There is no trigger that move to the position of the playhead, they produce just console.logs to try to solve this problem.

  Any help would be great.

  Mick

  Another version: display timelines.zip - Box

  I've posted all of the timelines. You have four maturities.

• stage of the target of the iframe

  Hello

  I have an iframe embedded in my step. Which works very well. However, I want to trigger an animation on the stage of my iframe code. Is this possible?

  Of course, as soon as I post, I find an answer. Hope this helps someone else

  In the iframe code:

  parent.functionName ();

  In EA composition (composition ready):

  nomfonction = function() {}

  sym.getSymbol("symbolName").play ("myLabel");

  }

• access to a stage of symbol tag

  Hi This is my problem, I did a navigation bar in a symbol, and I have the animations on a stage... How do I access access a stage of symbol tag... Thank you

  I solved in this mode

  sym.getComposition () .getStage () .play ("label");

• Edge comes back on stage when previewing

  This question is for the team of edge: is there a plan to change the behavior of the edge so that it is not back on the stage when you preview? It sucks a lot of my time. For example, if I have a publication with several nested symbols on the stage such as 3 symbol is inside symbol2 which in turn inside symbole1, who is on the stage. Like this:

  Stage > symbole1 > Symbol2 > Symbole3

  If I want to navigate to Symbole3, I double click on symbole1, then double-click Symbol2, then double-click Symbole3. I make a few changes to Symbole3 that I want to test, so I hit command-return and it works in my browser. It's all good, but when I get back on board, he closed Symbol2 and symbole1 and returns to the stage. Then I have to go back to Symbole3 to make changes more, test them and... Keep doing that until I have finally things the way I need them or I'm sick of clicking on the symbols.

  I am aware that I can double-click on Symbole3 in the library, but then I lost the context around it. And I still keep double-clicking it everytime I test.

  I think that Edge should stay however I have it when I test. Man, I would be so happy if he did this! No one else is having a problem with this behavior?

  Looking forward to hear what you think of this!

  Hey, Stacy.

  We are certainly aware of the problem, and we're investigating now a fix for the next version of edge animate.   Eggertr is right, if - internal server preview turned on all the time to animate is running, so you can simply refresh your window open instead of press Ctrl/Cmd + entry.

  See you soon,.

  -Elaine

• Export animation Cartoon to the question of the HD

  If I do an animation with the stage size to 640 x 360, which is 16:9 and then, when I export to 1280 x 720 HD that I lose quality? Looks like that it degrades a bit. I'd get a top quality outtput if I did the screen size 1280 x 720 to start? The work is the vector. I export with 30 fps animation and keyframe set to automatic using quicktime settings. I'm just trying to understand the best setting for export Flash animation of cartoon to the video on YouTube or video.

  Thank you

  Frank

  You're always better from your desired maximum target and down from there. Do not keep the thickness of the line large enough to reduce safe however.

  Conversely, if you increase the size before exporting then expect you this scale affects uniformly a few objects in ways that you can't be desired, as the line weight. It depends on origin of the work and what format is it really , as a smart object or vector flash or EPS imported, etc. Text is always a challenge as well because it seems perfect for a smaller size but can become undesirable large when upscaling (although it will make crispy).

  Ultimately keep the features of the thickness of 1px and exporting to HD would be desirable. upscale to 1280 x 720 to 1920 x 1080 well enough, especially with a vector, and the text translated pretty well.

• problem of nested table...

  Step - I, create a user defined type.
  
  Create the color_type type is object
  * (color_name varchar2 (100), *)
  color_short_desc varchar2 (30)
  *);*
  
  
  Stage-II, to create a nested type using the Type to define the user;
  
  Create the type color_nt is table of the color_type;
  
  Step - III, creating a Table, nested type used in this table ((deuxieme column)
  
  create the table m_color
  * (color_id number (10) not null, *)
  color_desc color_nt)
  store table nested like color_desc_nt; color_desc
  
  Stage-IV, enter the value in the table...
  
  insert into m_color values (1, color_nt)
  color_type ('white', 'wh')
  *));*
  
  but his returns an error...
  * ORA-00600: internal error code, arguments: [kokeeafi1], [3], [2], [], [], [], [], [], [], [], [], [] *.
  
  How to solve this problem... Please help me...

  Patricia wrote:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  I can't reproduce it:

  SQL> select * from v$version
    2  /
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> create type color_type is object
    2  (color_name varchar2(100),
    3  color_short_desc varchar2(30)
    4  );
    5  /
  
  Type created.
  
  SQL> create type color_nt is table of color_type;
    2  /
  
  Type created.
  
  SQL> create table m_color
    2  (color_id number(10) not null,
    3  color_desc color_nt)
    4  nested table color_desc store as color_desc_nt;
  
  Table created.
  
  SQL> insert into m_color values (1, color_nt(
    2  color_type('white', 'wh')
    3  ));
  
  1 row created.
  
  SQL> 
  

  SY.

• Is there a way to display animations embedded in the timeline?

  I made an animation that is nested in a clip, but it appears not on a frame-by-frame in the scenario... is there a way to make it appear in the scenario?

  I need to take a picture of my screen with each picture on it for a project of animation stop motion for the school... I tried to export a series of still images as a solution, but for some reason that nested animation data also fails to appear in any type of export of the film.

  Does anyone have any suggestions?

  Create animation as a graphic symbol and extend along the timeline for the number of images there.  When you move along the timeline with the cleaning brush, you should see the images to animation.

• Nested MovieClip

  I'm having a problem trying to get some nested clips to play. I'm having a problem of understanding of the command (structure) that I need to achieve this. I looked on the web and have gotten different answers which confused only me.

  I hope I can't expain the situation clearly and someone can help you.

  I have three video clips on three different layers in an image of the parent layer. each layer has a labIe (well just call it "Layer1", "layer2". "Layer 3") I have a stop at the level control parent (on its own layer). each of the three clips has its own animation (the nested animation). the two lower ones have a stop command to the first frame (nested) so that they will play. Only the top of the page movieclip would play the run.

  I want to place a gotoAndStop command in the scenario nested movie above, who will start playing the next low movie clip nested timeline, as the above ends, and repeat this process to cycle back to the movieclip at the top of the page.

  The overall goal is to have an animation invade others using nested timeline smoothly. I hope it's understandable.

  To do what you say you want to do, you must target the following movieclip using a relative reference so that you get back to the timeline that contains the 3 clips where you can then target the movieclip next.  Each of the 3 movieclips have an instance name so that you can target... say them that you name Film1 movie2 and movie3.  In the last image on Film1, you might have...

  gotoAndStop (1);  because you do not have a stop there already

  MovieClip (parent).movie2.play ();

  AS3 is unnecessarily picky about certain things — allows you to specify the class of the object targeted as a parent, so the use of the MovieClip() casting is necessary.  Otherwise, the average person would normally just use parent.movie2.play ().

  Now, your description is a little not claire about how deeply you're in the animations of the movieclips, so it is possible you have to double up on the targeting parent... MovieClip (parent.parent).movie2.play ();