Nested repeating Tables

Similar Questions

• How the repeating table inside a control valve?

  Hello

  Does anyone know how to make the repeating table inside a control valve in LabWindow CVI? I see that there is option for a Panel to scale content in resizing, but not available for a tab control. Any ideas?

  Thank you very much!

  Weiming

  I don't know, I understand what you're trying to do, but you can set ATTR_SCALE_CONTENTS_ON_RESIZE on each tab panel.

  GetPanelHandleFromTabPage (panelHandle, PANEL_TAB, 0, & tabPanel);
  SetPanelAttribute (tabPanel, ATTR_SCALE_CONTENTS_ON_RESIZE, 1);

• Remove buttons from 1st row on the repeatable tables

  I have a button in Row1 of a repeating table that adds additional lines. I want to be able to hide all these buttons by clicking another button located at the bottom of the form. Can you tell me how the script to count the instances of the table and then define the presence of each button to be "invisible"?

  It's my script does not work:

  vRows var = Table1.instanceManager.count;

  for (i = vRows; I > 0; i--) {}

  xfa.resolveNode ("Table1 [" + i + "]"). Row1.button1.presence = "invisible";

  }

  I was able to resolve myself. The script that works is:

  nRows var = xfa.resolveNodes ("Table1 [*]. Row1 [*] ");"

  for (var i = 0; i)

  {

  nRows.item (i). Subform13.AddQuestionButton.presence = "invisible";

  nRows.item (i). Subform13.DeleteLastQuestionButton.presence = "invisible";

  }

• May not know how to create a repeating table to PDF forms in InDesign

  Hello!

  It's all in the title. When I have my table with my header and footer, I can't understand how to create a repeating table for all users of my PDF files interactive.

  Thank you for your help,

  Will be

  If you mean that you try to create a table with entries from forms that develops by creating new topics, I'm sorry to tell you that is not possible in InDesign. It is not yet possible in Acrobat. The only software that takes in charge who is LiveCycle ES Designer that creates some XFA forms, a type of form which becomes less support in the future.

  -Dov

• Cannot nest layout table in the layout table

  I work through a training course on the design of websites using CS3, and one of the examples dealing with the mode layout is a layout table nested within a cell of another table of provision. I can get the result by editing the code, but I find no way in design view mode of disposal to accomplish the same thing after hours of trying. Help says you're supposed to be able to select a layout of the main layout and then table cell insert another table of provision in this cell, limit the size of the mesh, but the program won't let me anything inserted into an existing cell. I have attached the reference code. Can anyone tell if I should be able to create the nested table in Design view without just changing the code to force?

  Oops - sorry guys. I see that you already have a lot of suggestions.

  And the link I gave you was the wrong one. I see that Tim has given you the right
  one...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "Murray * AS *" wrote in message
  News:g5269k$pvk$1@forums. Macromedia.com...
  > If you take a training course which is the training allows you to use the page layout
  > mode, then throw this course or skip this chapter. You
  > should never use mode of provision, for the reason that you are currently
  > knows and many others.
  >
  > Here's a good reason to not use - read this and then look at your
  > code below.
  >
  > http://apptools.com/examples/pagelayout101.php
  >
  > In my opinion, there are three serious problems with page-layout Mode
  >
  > 1. Perhaps more important still, it sits between you and * real * HTML tables,.
  > and you fools in believing that concepts such as "layout cell" and
  > 'Auto fit' really means something. They do not. As long as you use
  > Layout mode, you're never going to learn one of the most important things for the new
  > web
  > developers - how to build solid and reliable tables.
  >
  > 2. In fact, wouldn't #1 * so * bad, except that the code that is
  > writing
  > set mode on the page is really bad code. For example, contains a layout table
  > NUMBER of rows empty cells. This can contribute to the instability of the table.
  > Also, if your initial positioning of the cells of the table is a little
  > complex.
  > Mode of disposal throw in the col - and rowspans aplenty as it merges and
  > splits
  > cells willy-nillly to get the pixelated layout you have specified.
  > Once again,.
  > It is a method of extremely poor to create stable tables, because it
  > allows
  > changes in form of a tiny cell (IE, dimensions) to ripple through the
  > rest
  > table, usually with the unexpected and sometimes disastrous
  > consequences.
  > This is one of the main reasons for the fragility of the final result - read
  >-
  >
  > http://apptools.com/rants/spans.php
  >
  > 3. User interface for Mode layout is beyond confusing - many options you
  > may
  > to use are inaccessible, for example, insert another table, or layer on
  > the page.
  >
  > I can understand the desire of the new user to use this tool to make their life
  > easier.
  > but the cost is just too heavy in my opinion.
  >
  > To make good tables, keep things simple. Put a table on the page and start
  > to
  > upload your content. If you want a layout on different tables, instead of
  > merging or splitting cells, consider stacking tables or nesting simple
  > tables instead, respectively.
  >
  > And most of all, do not try to create the whole page with a single table.
  >
  > Fortunately, Adobe includes the problems created for the untrained user
  > which falls into this trap and chose to remove this function
  > total of the next version of DW (CS4). The time has come for you
  > to start working with tables correctly!
  >
  > To learn more about this approach, visit the DW FAQ link in my sig and run
  > through the tutorials of the table.
  >
  > --
  > Murray - ICQ 71997575
  > Adobe Community Expert
  > (If you * MUST * write me, don't don't LAUGH when you do!)
  > ==================
  > http://www.projectseven.com/go - DW FAQs, tutorials & resources
  > http://www.dwfaq.com - DW FAQs, tutorials & resources
  > ==================
  >
  >
  > "tripap" wrote in message
  > news:[email protected]...
  > I work through a training course on the design of websites using CS3 and one of
  > the
  > are examples treating mode layout a layout table nested within a cell of
  > a different layout table. I can get the result by editing the code, but I can't
  > find
  > no way in design mode to mode of disposal to accomplish the same thing
  > after
  > hours of trying. Help says you're supposed to be able to select a page layout
  > cell
  > in the layout main table, then insert another table of provision in this
  > cell,.
  > limit dimensions of the mesh, but the program won't let me insert
  > anything in an existing cell. I have attached the reference code.
  > May
  > anyone advise if I should be able to create the nested in table
  > design
  > mode without just modify the code to force it?
  >>
  >>

  
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>
  >>

  	> THE NAME OF THE WEB SITE HERE
  > border = "0" / >
  	<> > href = "" javascript:; "> HOME"
  > border = "0" / >
  > height = "1" border = "0" / >	> height = "1" border = "0" / >	>> >> >> >> >> >> >> >> >> Name of the page here >> Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam > nonumy > eirmod tempor invidunt ut developed and pain magna aliquyam erat, sed diam > voluptua. At vero eos and accusam and justo duo dolores and ea rebum. STET > clita > kasd gubergren, no sea takimata sanctus is Lorem ipsum dolor sit amet. > Lorem > ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod > tempor invidunt ut developed and pain magna aliquyam erat, sed diam > voluptua. TO > vero eos and accusam and justo duo dolores and ea rebum. STET clita kasd > gubergren, no sea takimata sanctus is Lorem ipsum dolor sit amet. >> >> DUIs autem vel eum iriure dolor in hendrerit in fitness total esse > molestie MPCs, vel illum pain had feugiat nulla facilisis at vero > eros and > accumsan and carystian odio dignissim which blandit praesent luptatum zzril > delenit > augue duis pain you feugait nulla facilisi. Lorem ipsum dolor sit amet, > our adipiscing elit, sed diam nonummy nibh euismod tincidunt ut > pain laoreet magna aliquam erat volutpat. >> >> >> ? >>

  
  >>
  >

• Nested set tables in select query "in the clause of" take long time

  create or replace type t_circuitids is table of the varchar2 (100);

  -Under anonymous block continues to run away and never ends

  DECLARE
  v_circuitid t_circuitids;
  number of v_count;
  l_circuitids VARCHAR2 (4000)
  : = "Value1, value2, value3, value4, Value5";
  BEGIN
  -Query below converts the output concatinated with commas to the list and stores it in the nested table collection v_circuitids
  WITH an ACE
  (SELECT ',' | l_circuitids |) ',' AS circuitid
  THE DOUBLE)
  SELECT DISTINCT TRIM (SUBSTR (circuitid,
  INSTR (circuitid, "," 1, LEVEL) + 1.
  INSTR (circuitid, "," 1, LEVEL + 1)
  -INSTR (circuitid, "," 1, LEVEL)
  -1
  )
  ) cid
  LOOSE COLLECTION v_circuitid
  A
  CONNECT BY LEVEL <
  LENGTH (circuitid)
  -LENGTH (REPLACE (circuitid, ','));

  SELECT COUNT (1)
  IN v_count
  TABLE
  WHERE name IN (SELECT COLUMN_VALUE
  TABLE (v_circuitid));
  END;
  /

  -I had the question, query "SELECT COLUMN_VALUE FROM TABLE (v_circuitid)" that is used in code above is responsible for this.

  -Same code works fine in development and Test environments, but prod it continues to work on

  -I solved this problem by creating a temporary table, loading of all values in the collection in the temporary table and using this temporary table "in the clause" "

  -Can answer why his behavior like this when I use the collection where clause?

  -I use Oracle 9i

  Here is a summary of the question and the solution for this.

  -Nested type to collect multiple values

  CREATE or REPLACE the TYPE t_circuitid IS TABLE OF VARCHAR2 (100);

  Below the code will simply on the run.

  DECLARE
  v_circuitid t_circuitid;
  v_count NUMBER;
  BEGIN
  SELECT nal_name
  LOOSE COLLECTION v_circuitid
  OF fs_head
  WHERE groupid = 10;

  SELECT COUNT (1)
  IN v_count
  OF fs_attrib
  WHERE NAME IN (SELECT COLUMN_VALUE
  TABLE (v_circuitid));

  Dbms_output.put_line (v_count);
  END;
  /

  Cause:-SELECT COLUMN_VALUE TABLE (v_circuitid)); -This request is causing problem

  Why?  : - Because the CBO does not know how many lines is present in the collection, by default it takes 8168 lines

  Note:-always happens, it depends on the volume of data in the table, the path chosen by CBO. In my case, the table is huge on prod compared to DEV so he was causing a problem.

  -The following modified code works very well

  DECLARE
  v_circuitid t_circuitid;
  v_count NUMBER;
  BEGIN
  SELECT nal_name
  LOOSE COLLECTION v_circuitid
  OF fs_head
  WHERE groupid = 10;

  SELECT COUNT (1)
  IN v_count
  OF fs_attrib
  WHERE NAME IN (SELECT / * + cardinality (20 t) * /)
  COLUMN_VALUE
  TABLE (v_circuitid) t);

  Dbms_output.put_line (v_count);
  END;
  /

  Solution:-used as cardinality hint below.

  SELECT / * + cardinality (20 t) * / t COLUMN_VALUE TABLE (v_circuitid);

  Using cadinality I am saying CBO which dataset contains 20 lines or less.

  If it is version of Oracle 10 g and more, we can use below code (CARD utility).

  SELECT COLUMN_VALUE TABLE (CARD ((v_circuitid))

  For more information reach me at [email protected]

  Thank you best regards &,.

  Amarnath a. Reddy.

• Use FOR... LOOP counter in the treatment of PL/SQL procedures with nest. Table

  Hi all!
  I learn PL/SQL on the book by Steve Bobrovsky (specified below, sample comes from it) and I have a question.
  
  In the procedure of the below specified program used a currentElement integer variable to get the reference to the line in the nested table of data type % ROWTYPE.
  Meanwhile, the program itself uses a common FOR... LOOP counter I have.

  DECLARE
   TYPE partsTable IS TABLE OF parts%ROWTYPE;
   tempParts partsTable := partsTable();
   CURSOR selectedParts IS 
    SELECT * FROM parts ORDER BY id;
   currentPart selectedParts%ROWTYPE;
   currentElement INTEGER;
   PROCEDURE printParts(p_title IN VARCHAR2, p_collection IN partsTable) IS
    BEGIN
     DBMS_OUTPUT.PUT_LINE(' ');
     DBMS_OUTPUT.PUT_LINE(p_title || ' elements: ' || p_collection.COUNT);
     currentElement := p_collection.FIRST;
     FOR i IN 1 .. p_collection.COUNT
     LOOP
      DBMS_OUTPUT.PUT('Element #' || currentElement || ' is ');
       IF tempParts(currentElement).id IS NULL THEN DBMS_OUTPUT.PUT_LINE('an empty element.');
       ELSE DBMS_OUTPUT.PUT_LINE('ID: ' || tempParts(currentElement).id || ' DESCRIPTION: ' || tempParts(currentElement).description);
       END IF;
      currentElement := p_collection.NEXT(currentElement);
     END LOOP;
   END printParts;
  BEGIN
   FOR currentPart IN selectedParts
   LOOP
    tempParts.EXTEND(2);
    tempParts(tempParts.LAST) := currentPart;
   END LOOP;
   printParts('Densely populated', tempParts);
   FOR i IN 1 .. tempParts.COUNT
   LOOP
    IF tempParts(i).id is NULL THEN tempParts.DELETE(i);
    END IF;
   END LOOP;
   FOR i IN 1 .. 50
   LOOP
    DBMS_OUTPUT.PUT('-');
   END LOOP;
   printParts('Sparsely populated', tempParts);
  END;
  /

  When I substituted a global variable of INTEGER type such for... The LOOP counter, an APEX have returned an error "ORA-01403: no data found.

  DECLARE
   TYPE partsTable IS TABLE OF parts%ROWTYPE;
   tempParts partsTable := partsTable();
   CURSOR selectedParts IS 
    SELECT * FROM parts ORDER BY id;
   currentPart selectedParts%ROWTYPE;
   PROCEDURE printParts(p_title IN VARCHAR2, p_collection IN partsTable) IS
    BEGIN
     DBMS_OUTPUT.PUT_LINE(' ');
     DBMS_OUTPUT.PUT_LINE(p_title || ' elements: ' || p_collection.COUNT);
     FOR i IN 1 .. p_collection.COUNT
     LOOP
      DBMS_OUTPUT.PUT('Element is ');
       IF tempParts(i).id IS NULL THEN DBMS_OUTPUT.PUT_LINE('an empty element.');
       ELSE DBMS_OUTPUT.PUT_LINE('ID: ' || tempParts(i).id || ' DESCRIPTION: ' || tempParts(i).description);
       END IF;
     END LOOP;
   END printParts;
  BEGIN
   FOR currentPart IN selectedParts
   LOOP
    tempParts.EXTEND(2);
    tempParts(tempParts.LAST) := currentPart;
   END LOOP;
   printParts('Densely populated', tempParts);
   FOR i IN 1 .. tempParts.COUNT
   LOOP
    IF tempParts(i).id is NULL THEN tempParts.DELETE(i);
    END IF;
   END LOOP;
   FOR i IN 1 .. 50
   LOOP
    DBMS_OUTPUT.PUT('-');
   END LOOP;
   printParts('Sparsely populated', tempParts);
  END;
  /

  When I tried to manage this code in SQL * Plus, the following picture emerged:

  Densely populated elements: 10
  Element is an empty element.
  Element is ID: 1 DESCRIPTION: Fax Machine
  Element is an empty element.
  Element is ID: 2 DESCRIPTION: Copy Machine
  Element is an empty element.
  Element is ID: 3 DESCRIPTION: Laptop PC
  Element is an empty element.
  Element is ID: 4 DESCRIPTION: Desktop PC
  Element is an empty element.
  Element is ID: 5 DESCRIPTION: Scanner
  --------------------------------------------------
  Sparsely populated elements: 5
  DECLARE
  *                                                 
  ERROR at line 1:                                  
  ORA-01403: no data found                          
  ORA-06512: at line 14                             
  ORA-06512: at line 35

  What's not in the code (or what I did not understand)? Help please!

  Your error occurs because you are dealing with a sparsely populated collection and using an index for items that do not exist.

  For collections of the low density of population, you must iterate through using FIRST and THEN as modeled not from 1 to COUNT.

  The crucial difference between your code and the example is:

  tempParts(i)
  

  Which, as you have demonstrated, doesn't work very well (!) if there is no item (i).

  The code example is a little unusual in my opinion.

     currentElement := p_collection.FIRST;
     FOR i IN 1 .. p_collection.COUNT
     LOOP
      ...
      currentElement := p_collection.NEXT(currentElement);
     END LOOP;
  

  It works, but it's an unusual way to iterate through a collection of rare which is perhaps most often done like this:

     currentElement := p_collection.FIRST;
     WHILE(currentElement IS NOT NULL)
     LOOP
      ...
      currentElement := p_collection.NEXT(currentElement);
     END LOOP;
  

  Which is perhaps less open to confusion.

  In the end, the distinction between

  tempParts(currentElement).id
  

  and

  tempParts(i).id
  

  is crucial.

• How to position the element nested Repeater

  Hello
  
  I am trying to create a mx:Canvas element that has mx:Repeater element inside this loop around the element of external data mx:Panel. After several attempts, I realize that the attribute is not available in the mx:Panel. If I still want the function contains a sort of loop as such in the attached code, how can I have the attribute is to be enabled I can dynamically place the items according to the value of y, that I assigned to in my HTTPService?
  
  I welcome any kind of advice on that.
  
  Alice
  

  "alice_data" wrote in message
  News:gb58u1$G6R$1@forums. Macromedia.com...
  > Sorry, I should have been more explicit.
  >
  > I have an element mx:Canvas with elements of mx:Label followed by the
  > mx:repeater element, which contains the signs based on the
  > results
  > http. The position of the mx:Panel elements are supposed to
  > be
  > in line with individual attributes values are according to the
  > constraints. The main problem is that it seems that when I pulled out the
  > result.
  > do the attribute value there, despite the fact that it had been promulgated.
  > not
  > appear as they are. For example, if y is 44, he is always on the top of the
  > the
  > screen, that's why I question if the attributes are supported in
  > mx:Panel
  > elements or mx:repeater, depending on who can go wrong.
  >
  > Thanks in advance.
  >
  > Alice
  >
  >
  >
  >
  >
  >
  >
  > dataProvider = "{event_abc.lastResult.mydata.arr}" > "
  >
  > label = "{repeater1.currentItem.label}" "
  > = "{repeater1.currentItem.y}" / > "
  >
  >

  It works exactly as expected, then maybe you can look at and see how it is
  different from yours:

  http://www.Adobe.com/2006/mxml"layout ="absolute">

  Round table 1

  0

  Round table 2

  100

  Round table 3

  200

  Round table 4

  300

  
  dataProvider = "{repeaterSource.children ()}" > "

  
  title = "{panelRepeater.CurrentItem.label}" "

  x '20' = y = "{panelRepeater.currentItem.y}" / > "

• Question of nested initialization Tables collection

  When I'm this operation with Index by table it works howerver not able to perform even with the Tables IMBRIQUEES

  DECLARE

  TYPE column_record IS TABLE OF employees % rowtype

  INDEX BY PLS_INTEGER;

  EmpData column_record;

  I PLS_INTEGER: = 100;

  BEGIN

  WHILE I < = 200 LOOP

  SELECT * INTO empdata (i)

  EMPLOYEES

  WHERE employee_id = i;

  i: = i + 10;

  END LOOP;

  I: = 100;

  WHILE I < = 200 LOOP

  DBMS_OUTPUT. Put_line (EmpData (i). FIRST_NAME. "Work on the profile ' | EmpData (i). Job_id |' a salary '. EmpData (i). SALARY);

  i: = i + 10;

  END LOOP;

  END;

  /

  Steven is working on a salary 24000 AD_PRES profile

  John works on a salary 8200 FI_ACCOUNT profile

  Matthew is working on a salary 8000 ST_MAN profile

  Mozhe working on profile ST_CLERK has salary 2800

  Joshua working on profile ST_CLERK has salary 2500

  Peter is working on a salary 10000 SA_REP profile

  Louise is working on a salary 7500 SA_REP profile

  Tayler is working on a salary 9600 SA_REP profile

  Winston works on the SH_CLERK a salary 3200 profile

  Timothy working on SH_CLERK a salary 2900 profile

  Jennifer works on the AD_ASST a salary 4400 profile

  PL/SQL procedure successfully completed.

  Now when it is run with the IMBRIQUEE TABLE:

  SQL > DECLARE

  2 TYPE column_record IS TABLE OF employees % rowtype;

  3 empdata column_record;

  4 I PLS_INTEGER: = 100;

  5 BEGIN

  6 WHILE I < = 200 LOOP

  7 if he would CHOOSE * IN empdata (i)

  8 EMPLOYEES

  9. WHERE employee_id = i;

  10 i: = i + 10;

  11 END OF LOOP;

  12 I: = 100;

  13 then I < = 200 LOOP

  14 DBMS_OUTPUT. Put_line (EmpData (i). FIRST_NAME. "Work on the profile ' | EmpData (i). Job_id |' a salary '. EmpData (i). SALARY);

  15 i: = i + 10;

  16 END LOOP;

  END 17;

  18.

  DECLARE

  *

  ERROR on line 1:

  ORA-06531: Reference to an uninitialized collection

  ORA-06512: at line 7

  Too much remedy that I have included the following line:

  And then I'm stuck with another error.

  SQL > DECLARE

  2 TYPE column_record IS TABLE OF employees % rowtype;

  3 empdata column_record;

  4 empdata: = column_record();

  5 I PLS_INTEGER: = 100;

  6 BEGIN

  7 then I < = 200 LOOP

  8. SELECT * IN empdata (i)

  9 EMPLOYEES

  10. WHERE employee_id = i;

  11 i: = i + 10;

  12 END LOOP;

  13 I: = 100;

  14 then I < = 200 LOOP

  15 DBMS_OUTPUT. Put_line (EmpData (i). FIRST_NAME. "Work on the profile ' | EmpData (i). Job_id |' a salary '. EmpData (i). SALARY);

  16 I: = i + 10;

  17 END OF LOOP;

  18 END;

  19.

  EmpData: = column_record();

  *

  ERROR on line 4:

  ORA-06550: line 4, column 9:

  PLS-00103: encountered the symbol "=" when expecting one of the following conditions:

  constant exception < an ID >

  < a between double quote delimited identifiers > double long Ref table

  char time timestamp interval date binary character national nchar

  The symbol '< identifier >' has been substituted for "=" continue.

  Guide gently on the correct way to do it.

  Do you miss extend

  DECLARE
     TYPE column_record IS TABLE OF employees%ROWTYPE;
  
     empdata   column_record;
  
     i         PLS_INTEGER := 100;
  BEGIN
     empdata := column_record ();
     empdata.extend(200);
     WHILE i DECLARE
     TYPE column_record IS TABLE OF employees%ROWTYPE;
  
     empdata   column_record;
  
     i         PLS_INTEGER := 100;
  BEGIN
     empdata := column_record ();
     empdata.extend(200);
     WHILE i
  

  Steven Working on Profile AD_PRES has salary 24000
  John Working on Profile FI_ACCOUNT has salary 8200
  Matthew Working on Profile ST_MAN has salary 8000
  Mozhe Working on Profile ST_CLERK has salary 2800
  Joshua Working on Profile ST_CLERK has salary 2500
  Peter Working on Profile SA_REP has salary 10000
  Louise Working on Profile SA_REP has salary 7500
  Tayler Working on Profile SA_REP has salary 9600
  Winston Working on Profile SH_CLERK has salary 3200
  Timothy Working on Profile SH_CLERK has salary 2900
  Jennifer Working on Profile AD_ASST has salary 4400
  

• the selection of the PL/SQL nested block table error...

  SQL > create type string_table is the table of the varchar (100);
  2.
  
  Type of creation.
  
  
  
  declare
  v_names string_table: = string_table();
  Start
  v_names. EXTEND (3);
  v_names (1): = "Name1"
  v_names (2): = "Name2";
  v_names (3): = 'name3 ';
  dbms_output.put_line (v_names (1));
  dbms_output.put_line (v_names (2));
  dbms_output.put_line (v_names (3));
  dbms_output.put_line (v_names. COUNT());
  Select * from table (v_names);
  end;
  /
  
  
  
  
  Select * from table (v_names);
  *
  ERROR on line 12:
  ORA-06550: line 12, column 7:
  PLS-00428: an INTO clause in this SELECT statement

  Select * from table (v_names);

  I guess, here you have tried to put the contents of the NT NT one another, or simply trying to print it.
  But I don't think that INTO Clause is mandatory here.

  Please check your modified code (w/o INTO) and the output:

  DECLARE
     TYPE string_table IS TABLE OF VARCHAR (100);
  
     v_names   string_table := string_table ();
     v_test    string_table := string_table ();
  BEGIN
     v_names.EXTEND (3);
     v_names (1) := 'name1';
     v_names (2) := 'name2';
     v_names (3) := 'name3';
     DBMS_OUTPUT.put_line ('Old collection - '||v_names (1));
     DBMS_OUTPUT.put_line ('Old collection - '||v_names (2));
     DBMS_OUTPUT.put_line ('Old collection - '||v_names (3));
     DBMS_OUTPUT.put_line ('Old collection - '||v_names.COUNT ());
  
     DBMS_OUTPUT.put_line (CHR(10));
  
     /* SELECT * FROM TABLE (v_names); */
     v_test := v_names;
     DBMS_OUTPUT.put_line ('New collection -- '||v_test (1));
     DBMS_OUTPUT.put_line ('New collection -- '||v_test (2));
     DBMS_OUTPUT.put_line ('New collection -- '||v_test (3));
     DBMS_OUTPUT.put_line ('New collection -- '||v_test.COUNT ());
  
     DBMS_OUTPUT.put_line (CHR(10));
  
     /* Printing using FOR LOOP */
     FOR i IN v_test.FIRST..v_test.LAST
     LOOP
       DBMS_OUTPUT.put_line ('In FOR Loop --- '||v_test (i));
     END LOOP;
  
  EXCEPTION
     WHEN OTHERS
     THEN
        DBMS_OUTPUT.put_line ('Error ' ||SQLERRM|| DBMS_UTILITY.format_error_backtrace);
  END;
  

  gives o/p:

  Old collection - name1
  Old collection - name2
  Old collection - name3
  Old collection - 3
  
  New collection -- name1
  New collection -- name2
  New collection -- name3
  New collection -- 3
  
  In FOR Loop --- name1
  In FOR Loop --- name2
  In FOR Loop --- name3
  

  See this link - http://docs.oracle.com/cd/E11882_01/appdev.112/e17126/tuning.htm#CIHGGBGF

  Published by: Vanessa B on 26 December 2012 14:29
  -modified code

  Published by: Vanessa B on 26 December 2012 14:45
  LOOP FOR-updated - added 'again' code

• Need help on repeat lines of the table and the subform

  I hope someone can help me find a way to accomplish things with a subform of repeating table in a form I'm building.  I have attached the file here.

  https://workspaces.Acrobat.com/?d=2nUNZuTf2T4tsdSykMTlXw

  I have a table (AssessChart1Table) set up on pg 7 (analysis) and built in buttons (AddRowAssesChart1 and DeleteRowAssesChart1) so that the user can add or remove rows of additional data according to the needs.

  The problem is that the user enters also cross the line header (AssessChart1HeaderRow1) in this data table.  There are 10 available columns; However, they will have to add more data than that. Therefore, I made a button (AddMoreCourses) for the user to click on to add another instance of the subform table (AssessEvalChart1) and also to cancel adding the subform with this button (UndoAddMoreCourses).

  In addition, I setup that whatever data the user enters in the cell of this table cell (Prog-DeptObjChart1) are automatically transferred to another table (AssessChart2Table), cell (Prog-DeptObjChart2), which is located on the next page (AnalysisCont1).

  All above works very well except that whenever the user presses the button (AddMoreCourses) I don't want it to automatically fill cells of text field that are copied from (AssesChart1HeaderRow3) because I need the user to be able to enter different values rather than add more columns to fit their data.  In addition, I would like that the values of the cells in the left column to repeat well because these values will not change. Currently the values of the cells in the left column that wear down (AssessChart2Table) to get stripped on (AssessChart2Table) whenever I the user pushes button Add more courses or cancel add more courses.

  In summary, the tables would look like the attached screenshots:

  :

  Any help would be highly appreciated.  I'm not experienced with Livecycle Designer.  The form I built by reading the forums and the examples.

  Where you need it, I use Livecycle Designer v. 9.0.0.2.20120627.2.874785 on a Windows 7 Pro platform.

  Thank you!

  They will need to copy in a similar way as with the other lines. I would say on the exit event for the field of Prog-DeptObjChart1, add the code that copies the rawValue of him in the second table. Your code has something there now, but it does take into account that there will be multiple instances of the same line.

  Thus, in the constructor of your action, add another result to the condition of AddRowAssessChart1.click: Add a new instance of AssessChart2Row1.

  Then exit to Prog-DeptObjChart1 in the event, add this code.

  xfa.resolveNode ("AnalysisCont1.AssessEvalChart2.AssessChart2Table.AssessChart2Row1 [" + this. "]") parent.index +"]. Prog-DeptObjChart2") .rawValue = this.rawValue;

  Now when you exit the field you typed in, the text is copied in paragraph2.
  

• [static nested tables design liquid:]

  I finally got the header to the stretching of the car, but now I'm having trouble getting the nested page tables to stay centered and static compared to other tables. I hope I am being clear: I want all the elements on the page when the browser is out to always remain and centered.

  Here's the site (it's a work in progress):

  http://Peachtree-designs.com/

  I read that if you have a line, you can extract the cell either end and nest a Center table and this will do the trick, problem is that I have three points in a row (description text, slideshow and buttons) so I can't do that, I can only nest it in the tables.

  Total noob for Dreamweaver and not very good with html, even if I'm working on. Any help is appreciated.

  Thank you, sharon

  First mistake is that you use layout - never a good idea :-)

  Yes, you use tables nested, but in the middle section of your page, but the entire page are always in the table header, which means that everything you place inside (according to the directives of the middle section), will be stretched to fit the width of tables.

  What you need to do is:

  1. have the header as a separate table that stretches to fit the width of 100%.

  2 insert a new table after the table header and set the dimensions as required and centered it. The fixed provision column 3 and a new table in each cell to hold a.  logo of region b.  Gallery.  (c) buttons.

  Under the present insert another table to contain contact information.

  So, indeed, you would have 3 * separate tables.

  Header

  (Divided into 3 cells and nested with each other) central content area

  Contact information.

  This way, each table is independent of the other and can be called as required.

• Repeater nested XML data

  Hello
  I'm new to flex 2 and need help with a bit of problem nested repeater.
  I have an external xml code of data named "data.xml" as follows:
  <? XML version = "1.0" encoding = "UTF-8"? >
  < Products >
  < product >
  P1 < productno > < / productno >
  < section >
  A1 < articleno > < / articleno >
  < / item >
  < section >
  < articleno > a2 < / articleno >
  < / item >
  < / product >
  < product >
  < productno > p2 < / productno >
  < section >
  < articleno > a3 < / articleno >
  < / item >
  < / product >
  < / product >
  
  And the .mxml code is as follows:
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" >
  < mx:XML id = "data" source = "data.xml" / > "
  < mx:VBox >
  < mx:Repeater id = dataProvider = "{data.product"Repeater1"}" >
  < mx:Label text = "{Repeater1.currentItem.productno}" / > "
  < mx:Repeater id = dataProvider = "{data.product.article"Repeater2"}" >
  < mx:Label text = "{Repeater2.currentItem.articleno}" / > "
  < / mx:Repeater >
  < / mx:Repeater >
  < / mx:VBox >
  < / mx:Application >
  
  The problem with the release, is that section child for each parent product repeats:
  P1
  A1
  A2
  A3
  P2
  A1
  A2
  A3
  
  But what I want is:
  P1
  A1
  A2
  P2
  A3
  
  Can someone help pls as to what I did wrong?
  
  Thank you!!
  
  

  You must give your Repeater2 dataProvider only the data your currentItem Repeater1. The code below the output the desired results:

  
  
  
  
  
  
  
  

  Vygo

• The table with "(continued)" header when repeated

  Hi, I am a beginner and I use the Model Builder 5.6 build 45 in Word.
  
  I have table with position repeat lines in my model. Is it possible to have repeated table heading add the word "(continued)" at the end of the section when repeated on another page? In other words, if the table breaks across a page, the heading on the first page is "Title", but the section on the second page has "Title (continued)."
  
  Thank you in advance for your help!
  
  IRIS

  This is an example with header and footer messages...

  ! http://DL.getdropbox.com/u/2587826/continued.PNG!

• Repeat the TDs instead of TRs?

  I'm trying to convert my site from GoLive to Dreamweaver. I am there among them now to transform the dynamic aspects of PHP/SQL of some pages. The problem, I now try to repeat the data found in the cells of a table rather than whole lines of a table.
  
  Here is my page in GoLive, old I just used the GL built in beautiful ways for making dynamic pages, I don't remember even how I did it was so long. Link
  
  Here's the new page in Dreamweaver, I can't understand in Dreamweaver how to repeat the results in table cells, 4 cells per line. Link
  
  Thank you in advance.

  Quote:
  Posted by: newsgroup user
  You would either have to hand code it, or use a nested repeated region (a
  which is repeated four times and then starts a new line). Tom Muck has a
  for this extension, I think - http://www.tommuck.com

  Thank you, I never would have found something like this. I'll give the Horizontal Looper to try.