NET framework for updating the Disk Manager is missing in my PC

Similar Questions

• The operation did not complete because the disk management console view is not updated.

  Disk title management error: Windows 7 original by adding a drive letter
  Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

  "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

  Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

  I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

  Thank you

  Methadras

  Just to follow and finish this, the old MAIN drive has had some problems and was

  continues to worsen, it ends up by crashed.  scannow revealed some Windows system

  Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

  and did a restore of the system since the disks created with the purchase and restored the system to

  "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

  Adding external or internal disks worked without any problem now.

  I created a Windows 7/64 system repair disc.

  I created an Image of the system.

  I have a backup plan.

  I do the scheduled backup.

  I learned a lesson...

  Joe_T45

• View of the Disk Management Console is not updated.

  I use win 7.
  I tried to change the size of the disk by using the magic of the partion and it failed. He asked me about a wrong address, and I click on continue (I guess he's changed the logical address).
  Now I can't see my partion (D) to the workstation.
  When I run windows disk management and try to change the drive letter, it is said: "the operation failed to complete because the disk management console view is not updated. Refresh the gwendoline by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »
  I tried with windows Diskpart to mount the partition but I can't. If I have the volume list, it shows me only (C), but if I list the partition, then it shows me all the 3 partition:
  Partion 1: OEM
  Partion 2: primary
  Partion 3: primary
  but I can't access partition 3.

  Hello faithful,.

  Have you tried to use other third-party programs to "manipulate" the discs?  It seems that even if Palcouk $ million question with is it compatible, so I shot to the top of Partition Magic site and see the this PM 8 is not compatible with Windows 7.  I would try to see if you can access the partition from the command prompt, but I promise that would work.  Have you created a backup of your data before you do?

  I would say go to the link below and post a question with the community to see if you have viable options to recover from this.

  PartitionMagic 8.0 system requirements

  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004050716123662?open&docid=2004050712232662&NSF=PowerQuest.nsf&view=6c360f88152ecfce88256e91005066ac

• I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  And moved to the DPS forum.

  The classic DPS plugins are not supported in CC2015. You go back to CC2014 for that. Only the new digital publishing Solution will be supported in CC2015.

• just has got rid of the virus and responsible for all the disks but given the wifi does not work

  WiFi doesn't work do not

  just has got rid of the virus and responsible for all the disks but given the wifi does not work

  Hello

  Check with the system manufacturer or the actual WiFi device manufacturer and ask in their forums (if any)
  for problems known.

  Actually, try updating your driver:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• After that Ms last update the task manager has changed

  After that the last MS updated, the task manager has changed. I used for the right click at the bottom of the screen, select Task Manager & get 3 or 4? options to select.

  Those I used gave me a chart of the use of Internet + speed info; now, I only get the list of processes, no option & the only way out is to TAP (DO NOT TOUCH!) the ESC key.

  Is this another feature of MS or make me a form of bribery? JV

  Sorry, but I don't really know what the problem is here. In any case, try to roll back OS to an earlier time using System Restore tool. Choose the time prior to installation of update from Ms. Everything should be as it was before.

• How and when uninstall net framework and updates?

  NET frames 1, 2, 3, installs can be complicated. the option/Remove changeis omnipresent, click on modify & or repair, system trying to fix / or finish installation without result! Any help is appreciated.

  Hi ErikCraig,

  I recommend that you do not uninstall Microsoft .NET Framework. Update of Microsoft .net Framework is an important update. It supports several programming languages that allow interoperability of languages.

  Reference: Benefits of Microsoft .NET Framework

  Hope the helps of information.

• I get the U43M1D207 error message when trying to download update the extensions Manager

  Hello world

  I have a second cam from Nikon, the D7200. I also use the D800. I mainly edit my photos with RAW file.

  I tried today to open a RAW in PS and received the message that he does not recognize this format. I did an update on raw, but still it does not work. When I try to update the extensions Manager, I get this message: U43M1D207. What is the problem, how can I solve this problem. It would be terrible if I can't use the RAW data within the new cams.

  Thanks for your help, you

  You can't update cs5 cr 9.

  You can use dng format converters, however.

  DNG converters:

  Win
  Mac

• I reinstalled just CS6 Master and it would be only doewnload 1 GB to 3 gb of updates before refusing to download 2.2 GB left because he could not update the Application Manager. WHY? It has been updated right before that I have re-installed.

  I reinstalled just CS6 Master and it would be only doewnload 1 GB to 3 gb of updates before refusing to download 2.2 GB left because he could not update the Application Manager. WHY? It has been updated right before that I have re-installed.

  In addition, he sends you on the parser that is no longer supported, and it sends you to a page for CS6 that refer to it at the bottom. There was no reference to the Application Manager in the journal of management files, only the extension, restart and the police.

  Finally found the patch on Google search. CC sound and includes versions of CS. ApplicationManager8.0_all.exe

• Need for a solution when the Boot Manager is missing.

  * Original title: startup

  need for a solution when the Boot Manager is missing

  Startup Repair,

  http://www.SevenForums.com/tutorials/681-startup-repair.html

• I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. I don't want t

  I just bought a new iMac and used the Migration Assistant to transfer my files. At first everything worked, but now a week later, I get the message that the application manager is missing, and I can't Photoshop and InDesign to start. For my personal use, I don't have a need to reach creative Cloud. You have any suggestions for a workaround?

  Try installing Adobe application Manager down the link and check

  Adobe - Adobe Application Manager: for Macintosh: Adobe Application Manager: thank you

• NET Framework update Failure__Cannot install a netframework version 1 to 3.5 on windows xp professional. Try would use the windows cleanup tool, but a net framework not in the list.

  [12/12/09, 18:09:50] Windows Installer Patch Fix for .NET Framework 3.5 application (x 86): CGenericComponent::Install() [2] provides that the Setup file for Windows Installer Patch Fix for .NET Framework 3.5 application (x 86) but fails to get
  [12/12/09, 18:09:51] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InternalInstallManager() with HRESULT - 2147467259.
  [12/12/09, 18:09:59] WapUI: DepCheck [2] indicates Windows Installer Patch Fix registration for .NET Framework 3.5 (x 86) is not installed.

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• NET framework 4 keeps the installation of the update even on a more on my windows vista computer, anyone know how to stop this problem

  NET framework 4 installation of the update even guard on one more, how can I stop this problem

  See the article after some troubleshooting for your question:

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339/en-us>

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 15:17 Thursday, May 17, 2012

• Microsoft tools for restore the disk framentation system, and several others are missing. Is there a way to recover/reload?

  My computer crashed so I had to use my recovery disks that are about 8-10 years. When I reinstalled Windows service pack 2, the system recovery tools and several other microsoft tools not have installed on my system. Is it possible to recover these tools? The command prompt tells me that they are not on my system and get help from the Server Manager in the service (Net HelpMSG 2185) option. Can you tell me what that means and if/how I can do this?  I can't find a tab from the system restore on my computer. I guess that's because I have more access to these tools. My messages when I try to update things like Windows Media Player tells me that I can't set a date of restoration and that if I lose my installed programs that they can not be recovered. Guess that means I have to use my recovery again disks?

  <(Microsoft tools="" for="" the="" system="" restore,="" disk="" framentation,="" and="" several="" others="" are="" missing.="" is="" there="" a="" way="" to="" retreive/reload="" these="" tools?="" (assessories,="" system="" tools)="">

  Hey, take a look at the article and try the steps

  http://www.softwaretipsandtricks.com/Forum/Windows-XP/17333-System-Restore-tab-missing-XP-Pro.html

  See you soon!

• NET Framework installation updates will not be

  I get notifications for the updates of Microsoft NET Framework that collide on the update.  I tried several times to install the SP1 without success.  I have version 1.1 is installed.  Do I really need these updates at all?  Everything seems to work fine as it is.

  Vista Home Premium 32-bit
  4 gig RAM
  250 gig HD
  Sony Vaio

  Sohail salvation!

  Thank you very much for the help.  It worked!  I tried method 1, but did not find the Windows Installer CleanUp utility .NET Framework files or programs to uninstall.  SO, I went to method 2.  I downloaded the the .NET Framework automatic cleanup tool and he found files for uninstall.  Then I rebooted and used your link and downloaded .NET Framework 1.1.
  I then download and install .NET Framework 2.0, which I had originally, but during the installation, I got a message telling me that it was already installed on my PC.  (?)   OK, who am I to argue?  Then, I downloaded and installed .NET Framework 3.5.  This installed as it should.

  After that, I went to Windows update and have already told him to search for updates.  Well, he finds the service pack 1 for .NET Framework 1.1 AND there for .NET Framework 3.5 SP1.  It's where he always bombed.  With your help, they both downloaded and installed as they should.  Thank you!

  I was surprised by Brent saying 'if it ain't broke, don't fix it' so to speak.  These updates must be installed initially.
  So, the problem is solved thanks to your help.

  Once again, thank you!
  campyrs
  (Suzanne)