The operation did not complete because the disk management console view is not updated.

Similar Questions

• View of the Disk Management Console is not updated.

  I use win 7.
  I tried to change the size of the disk by using the magic of the partion and it failed. He asked me about a wrong address, and I click on continue (I guess he's changed the logical address).
  Now I can't see my partion (D) to the workstation.
  When I run windows disk management and try to change the drive letter, it is said: "the operation failed to complete because the disk management console view is not updated. Refresh the gwendoline by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »
  I tried with windows Diskpart to mount the partition but I can't. If I have the volume list, it shows me only (C), but if I list the partition, then it shows me all the 3 partition:
  Partion 1: OEM
  Partion 2: primary
  Partion 3: primary
  but I can't access partition 3.

  Hello faithful,.

  Have you tried to use other third-party programs to "manipulate" the discs?  It seems that even if Palcouk $ million question with is it compatible, so I shot to the top of Partition Magic site and see the this PM 8 is not compatible with Windows 7.  I would try to see if you can access the partition from the command prompt, but I promise that would work.  Have you created a backup of your data before you do?

  I would say go to the link below and post a question with the community to see if you have viable options to recover from this.

  PartitionMagic 8.0 system requirements

  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004050716123662?open&docid=2004050712232662&NSF=PowerQuest.nsf&view=6c360f88152ecfce88256e91005066ac

• Error "disk Management console view is not updated" on Windows 7 64 bit

  Hi team,

  Is my laptop model Dell Studio XPS 1645

  Operating system is Windows 7 Professional 64 bit

  Size of HARD drive internal 500 GB

  I got 4 partitions initially, 1 for the C drive and remaining 3 storage purpose. I took the backup of all Partitions of sup 3 and then I tried to combine these 3 partitions sup in one partition but I get following error. I refreshed and restarted my system so many times. Kindly help me with this problem.

  

  Hello

  I suggest to follow the steps indicated by Arya S Asok in the link given below and then check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/the-operation-failed-to-complete-because-the-disk/4662593a-4AF0-4834-BE27-351ef9d26776

  Let us know the status of the issue, we will help you.

• Cannot change the drive letter. Obsolete disk management console.

  Original title:

  Help me please. I'm so sad

  my score is not see the...

  I have a problem, I ask you to solve

  

  I have suffered from an attempt to repeat to restore my driver context

  Please I want a solution to restore my files that were on this context

  

  and here

  

  What should I do

  I don't want to run out of data

  Please I want a solution

  big THX Microsoft

  Please take a look at the following links:

  http://support.Microsoft.com/kb/2001877

  http://social.technet.Microsoft.com/wiki/contents/articles/19472.Windows-Server-the-operation-failed-to-complete-because-the-disk-management-console-view-is-not-up-to-date.aspx

• The operation cannot be completed because you do not have the necessary permissions.

  The operation cannot be completed because you do not have the necessary permissions. This is the message I get when I want to create a new folder. I don't have this problem until recently. 1.

  How should I do?

  2 is that there is a security breach?

  I use sierra but, I had the same problem with el Capitan

  When you try to create a new folder? is it an external device? your office? a NAS?

• Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

  After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

  Aren't these photos on the desktop 'copies' of the originals in the Photo?

  All wise users out there with an answer?

  stop, disconnect all external devices

  Restart your computer in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  empty the trash after checking the files in there are of no use to you

  arrested again

  Reconnect the external devices

  reset.

• I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

  I am unable to PDF vacuum garbage.  I get a pop up: the operation cannot be completed because the item is in use.  Any suggestions?

  Are all the other apps open while you try to do this?

• Why the application manager said that muse is updated, when it isn't? And will not let me update?

  Why the application manager said that muse is updated, when it isn't? And will not let me update?

  I have the latest version of OS X I opened Muse and he tells me that I have to update. I have check and that's only still v1.1, 960 to build.

  There is a promblem I don't know?

  Hello

  Sorry for the confusion and frustration.

  Because the Muse is an Air application, there are some limitations in the way that we interact with the Application Manager that can cause these types of States in conflict. We have plans that will address this, but unfortunately, it of a complicated situation and will take time.

  I'm working on a document that will address all the various installation questions such as this one and post it on the forum and elsewhere when its done. I apologize that this has not happened before and several people were affected than expected.

  See you soon,.

  Justin price

• How to install the Microsoft Management Console?

  Hello

  I have a Satellite (S1800-412) with Win XP.
  Now I need to install the Microsoft Management Console on, but I have not possibility, because I have only Toshiba CD-ROM product recovery.

  to install the Microsoft Management Console, I should have the XP installation CD, but I did not.
  So my question is:
  What can I do with Toshiba CD-ROM product recovery to install on my satellite Microsoft Management Console?

  I'm trying to understand the policy of Microsoft and Toshiba, but it doesn't look good when I spend much for the XP system and I don't have the cd it wit.

  How can I solve my problem?

  I need to get an answer as soon as POSSIBLE!

  Concerning

  Stan

  Haha! It's easy:

  1. click on run.
  2. type in mmc.exe
  3. press enter
  4. There you are

  :)

  Where is my reward? (:)

• did not update recovery partition

  Update my OS to 10.11.6

  The update did not update the recovery partition, it is now incompatible (currently at 10.11.5). How can I update the recovery partition?

  Ran 10.11.6 combined together, he did not update recovery partition.

  (Sorry, it should be under El Capitan)

• Installation of the Enterprise Manager Console only

  Hello
  
  That's 10g on Windows.
  
  I want to only install the Enterprise Manager Console on my desktop PC.
  
  But I do not know which install files to use - can I simply start as if I install the complete database? is there an option along the way to select only Enterprise Manager?
  
  Thank you, John

  I assumed the OP referred to as console java EM

• What are the tasks we can perform by using Component Services in the Microsoft Management Console?

  Original title: use MMC

  Can someone enlighten me on component services, found in the administrative tools, including the management console folder. Is their anything that can be done by someone who has no knowledge on this subject, extensive Windows, I use XP (SP3) thank you.

  Hi ratchet.

  Microsoft Management Console (MMC) lets system administrators create much more flexible user interfaces and customize administration tools.

  See this link for the tasks that we can perform using Component Services in the Microsoft Management console.

  With Component Services, administrators can deploy and administer service applications of components through a graphical user interface or automate administrative tasks using a programming or scripting language. Software developers can use Component Services to visually configure routine component and behavior of the application, such as security and participation in transactions, and to integrate components into Component Services applications.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

  Also check out this link:

  Using the Microsoft Management Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_start_mmc.mspx?mfr=true

• Password and connection to the JRun Management Console

  I just installed the development version ColdFusion MX 7.0.2 in the MultiServer configuration. This figure includes JRun. When I go to the JRun Management Console I'm invited for a user name and password. I don't remember when I put this in place during installation. How to access this tool?

  Never mind. I found the answer here:
  http://www.Adobe.com/support/documentation/en/ColdFusion/MX7/releasenotes.html

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• My computer does not display the correct names of my hard drives, but because of disk management.

  original title: Hard Drive rename BUG

  I have a problem with the change of name of the hard disk.

  Disk Management displays the names for each partition, but when I open my computer C only a specific name, the rest of the partitions are named local disk and if I try to change it by right clicking Rename or properties and change volume name, after clicking on ok nothing happens, but more funny that I go to disk management and I can see the change in the name of the partition , but Explorer keeps showing local disk, drives me crazy.

  I am running windows 7 Pro.

  Someone please provide solution.

  Thank you.

  Hello

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://windows.microsoft.com/en-GB/windows7/Back-up-the-registry) How to back up and restore the registry in Windows

  You can try these:

  a. open the Start Menu.

  (b) in the area of the white line (search), type regedit and press ENTER.

  c. click on the button continue in the UAC prompt.

  d. in regedit, go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer

  e. in the left pane, right-click on explorer.exe and click on New and key.

  f. type DriveIcons and press ENTER.

  g. in the left pane, click with the right button on DriveIcons and click on New and key.

  h. type the drive letter (EX: E) you want to change the route name and press ENTER.

  i. in the left pane, right-click on the drive letter (EX: E) and click on New and key.

  j. type DefaultLabel and press ENTER.

  k. in the right pane, click with the right button on (default) and click on change.

  To change the name of the reader - l.

  i. enter a name (Ex: My DVD), and then click OK.

  II. go to step n.

  Mr.. to restore the default drive name-

  i. leave it blank, and then click OK.

  II. go to step n.

  n. Repeat steps i to m if you want to add another drive letter icon to change.

  o. close regedit.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.