NET tool

Similar Questions

• While trying to install NET tools 5.0 in Vista, get the error "unable to save ole stdole2.tlb.

  The total error is

  c:\windows\system32\stdole2.tlb
  Could not register type library: RegisterTypeLib failed; 0x8002801c. access to the ole registry error

  It's trying to install NET tools 5.0. After a google search, this error occurs with a lot of different programs believe me it's a vista problem. Moreover, mine is vista 64 bit.
  If you do a search on google on stdole2.tlb cannot save and I know that the first 7 pages are all persons with the same error.
  which many vb developers. It doesn't seem to be a solution at the moment.

  So, how can I correctly enter the ole registry stole2.tlb?

  Hello Randabeast,

  You can try to install in a boot environment, this can help us identify if another program is interfering.

  For instructions on how to perform a clean boot, see the following link: http://support.microsoft.com/kb/929135

  You can also try to choose the button ignore and check if the application is working correctly.

  Let us know if it helps or if you need further assistance.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How to control the NET tool?

  I am wanting to use the NET tool, but I need to know how to control my lines. I want a starting point and a point endpoint, but when I click on the start point is decided by me but the end point is decided on its own, and is not the end point, I want to. I want a line right (with some curves), but I'm a diagnol line. How a control that?

  Monika,

  I understand the basic concepts of the mesh. I begin to understand the functioning of meshes. I'm getting better lines here:

  

• Please help me! I'm fighting with the NET tool!

  So I want to make this Chair as it does in the picture, but I can't! There is a chapter in my book to Illustrator CS3 explaining how to use the gradient mesh and mesh tool, but it does not at all help me. I am naïve.   The tutorial explains I can create points in the mesh just by clicking on the tool of mesh within an object, but when I try to do, the pointer is "blocked". I can only add additional points on the lines or edges, but not on an empty space in an object. What gives? Why is that what others can do only one I can't? Forgive me if I seem a little too upset, but I've been struggling with this days and I can't find an answer.

  In this tutorial here: http://www.layersmagazine.com/Illustrator-gradient-mesh-tool.html the guy just clicks in the empty spaces, creating intersections. In my case, that's impossible.

  PS: Please look an attached file and tell me what would be the best way to go on this Chair to colouring. Maybe I'm doing this completely wrong? (I only started learning illustrator about 5 weeks ago)

  Sorry for the background model is of poor quality, but this has been taken from a book and scanned, so it's the best I could do.

  It seems that it has the object selected by the path only and perhaps an or tow other settings to go with that as the edges to hide or hide the rectangle enclosing.

  The film is directed with Snapz Pro.

• Mix together 2 objects that are made with the NET tool

  Hello

  Please could someone give me a little advice in this regard?

  In the image below, you can see that I am trying to add a few stems look at the head, both the stems and the head is made with a gradient mesh.

  Is there a way to get the stems blend smoothly into the head?

  Set just behind looks not right, somehow.

  Thank you

  Sally

  

  Try to make the nodes in the mesh to the transparent edges.

  Or choose the color of the mesh edge slot.

• NET - fish tool

  Hello!

  I'll follow a tutorial where I will make a... fish!

  Step 3 on: 93 http://www.Tutorialized.com/View/Tutorial/How-to-Create-a-Vector-Goldfish-in-six-Steps/551

  I just did a clipping of a rectangel and the fishbody mask, I don't know why because the only thing that happened when I did a fish clipping mask and the rectangle orange, that was the fishbody me orange.

  After that I received a description of how to do to add a light on the body, and they tell me (in the text under) I'll be using the NET tool and click in fishbody.

  "Create spots of light on the body of the fish. Add a point to the mesh using the Mesh (U) and clicking anywhere in the area of the shape (Fig. 3 c). After you convert a form into a mesh, you can select points with three tools: Mesh Tool, tool Selection and the Lasso tool.

  Now, all you have to do is to add color to the mesh by selecting a color from the Swatches palette. I took colours from the Swatch Library > metal. Be creative with the color at this stage in order to get an optimal result. »

  The problem is When I had the Tool (U) active Mesh (if I point at the fishbody, there is a border around the fish) and click on the orange fishbody... Nothing happens, I don't know what is supposed to happened, but nothing happens.

  What can I do?

  Thank you!

  You must first convert the mask shape to a gradient mesh. Object > create gradient mesh

• Recalcitrant mesh tool handles or...

  ... I am ignorant about its use. Just decided to try the NET tool. When I try to adjust the control handles, I get unpredictable results - mesh lines jumping around and Acting UN controllable.

  Is there anyone who has had this problem?

  Thank you very much

  When you add a mesh in a non-standard form, Illustrator will sometimes add what he calls "helper" points on the mesh. The following points of mesh are not immediately visible to the user. They are designed to help train the mesh to the unusual shape. You can see these support points, if they exist, by selecting a mesh and then switch to the tool less Anchor Point (under the pen tool). Assistance points will appear as smaller than the norm of mesh points points (although it is not very easy to notice the difference in size initially). You can then use the anchor tool less to remove the points of support.

  To be honest 100%, I don't understand the logic of Illustrator adding these support points, but this was how Illustrator meshes have always worked.

• Gradient Mesh tool will not work on a standard gradient

  How can I get the NET tool to work on a gradient? If I place an RGB image and create a gradient on her net, I can select each individual point, and then use the color picker to select a color below by clicking on the placed image. However, if I create a gradient on a standard gradient mesh I can not pick up the color of the standard gradient which is below. What is the color picker, raise the overall slope. It does not put any color in the different points of the gradient mesh.

  Well, you can always gradient rasterize manually by flattening its appearance...

  Mylenium

• Pantone colors and networking tool.

  Hello

  I am doing a logo using the NET tool. I have to use pantone colors, since it will be used on a bussinesscard.

  Now, I'm having the following problem: I select a darker color on the lower part of the object, and the gradient goes from dark, to light, to normal.

  Why is this happening? Is this because I use the PANTONE? He looks just yucky.

  Thank you!

  Image:

  [IMG] http://i22.Photobucket.com/albums/B338/Aetza/drop.PNG [line]

  I clicked three times, so I have three horizontal and three vertical lines. The bright part that happens between two lines.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  Also, I have no knowledge of printstuff.

  And because of this, others are here trying to help you avoid yourself in trouble. Before anyone actually starts to load money to do the work of design or preparation for commercial printing, they have really should consider their responsibility (what a concept!) in fact be less familiar with the printing process. Otherwise, if you present yourself as a designer for print, you really are defrauding the customer.

  Take a course at school local tech. part-time work in a newsroom for peanuts, just learn. At the very least, ask someone to give you a functional to a newsroom tour when you can.

  It's not rocket science; It is especially a simple mehanics. But it is also not just a simple matter of reorienting your work of web RGB. (Actually, it's backwards; usually, you first need to design for printing and then reuse for the web).

  As soon as you start talking about real ink on paper, you talk about the work reality and materials in real-time on some really expensive equipment. Commercial offset printing is very competitive. Printing houses by jobs citation needed according to the jobs coming in from external preparers method are built right, i.e.; that the external designer knows what he does. You can't wait for a print shop to eat the costs involved in the setting of your file-picking errors.

  In short, the printing world is full of very bad relations between angry designers who think they know what they are doing (often these days here just because they did a design work for the web) and printing of the houses who know that they don't. Trust me: you don't need this stigma. A print designer she should consider a question of the need for very strong with publishing houses, based on the mutual respect of professional relationships. Without this, you really will be not competitive, no matter how skillfully talented you consider yourself.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  But it's really a pantone

  There is no such thing as 'a pantone. PANTONE is a trademark; It's a business. Different Pantone libraries are a few sets of standard tones or sheet of color published by Pantone and process used to communicate colors to the publishing houses. PANTONE is not the only game of spot colors, but it is most commonly recognized in offset lithography; It precedes graphic computers for decades.

  When you create a file for the separation of color (e.g., mass printing), your concern is if it will be printed in spot color or process-color printing (or, in some cases, a combination of the two). So that your color file correctly, you should build properly.

  And the color separation isn't the only issue; There are other issues affecting if work is printed correctly, such as the density of ink trapping and total.  For example, spot is inherently less forgiving when you neglect the issue of trapping.

  All prints are a matter of production economics. Business process vs. tones, several practical factors come into play, including the type of paper, the specific press which will be executed work and even the nature of the work of art itself (ex: line vs halftone, tightness of registration of color and others).

  When designing for the printing of separate colors, do not think in terms of 'color '; think in terms of real, physical inks. Basically, your job is to deliver to the printing of a file that contains an image by ink - especially with spot (i.e.; that too many people think as a synonym for "Pantone"). Don't think a point of color as a 'color '; Think of it as a ink.

  Offset presses have an ink separate for each ink that will be printed. Each ink hits the paper at a time other than the sheet passes through the press. Typical printing of SME - SMIs, bread & butter jobs like business cards are usually run on rather small presses. Those who are rarely more than 4-color presses and are often 2-color presses. If, in your work, the number of colors for separation then exceeds number of inkwells on the specific press, the job cannot be printed in a single pass; the paper must be rerun to apply the number of inks and implies another implementation of press operation - you pay.

  So if (as it may seem), you take the warning 'use Pantone colors' just average for "make sure that all of the colors you use are selected in the Pantone swatch library", you're already in trouble. Whenever you add a color it draws in a spot color in your file, you're requiring another ink on the press.

  If you've read and taken seriously into consideration the foregoing, you will understand that, overall, it is rarely practical (profitable) to design a room containing more than three tones. As soon as you need three colors, you should consider 4 color (CMYK) process.

  (The high-end printing is often done involving more than four inks; it is not uncommon for work leaves color-plus-1 or process color-plus-2 tones.) MultiPass jobs may involve spreadsheets, varnish and metallic inks. But this impression of "lavish" is knowingly extravagant and is always carefully prepared to maximize the economy within the limits. Bien_qu' it may be, this extravagance isn't definitely usually the sort of thing used for the project type card.)

  JET

• Why can I not use the net? -brand-new user illustrator

  I am trying to learn to use illustrator - I watched the videos online - which are very useful, but it is not everything that I can find for the NET tool.  I want to add some shadows on the body of this acrobat, but whenever I try to use the NET tool, I get the symbol is not available.  I cannot understand why or how to change.  I started from a scanned drawing makes a vectorization and converted to direct to fill in color paint.  What should I do now to activate the NET tool?  Help, please!

  Well, the question is drawn transparent, more precisely on the unitard. You will notice the tool works of fine mesh on his left arm.

  If you select the unitard and choose object > compound path > Release, you can then apply a mesh to the unitard.

  Honestly, I don't know why an object on a new layer would not allow the Mesh tool function. There must be something about art forbidding him.

• KB2656353 install fails with error 0 x 643

  Dear Microsoft support community,

  (a) I have Windows XP Professional SP3.  I haven't used this computer
  in almost a year, so the first thing I did was to hang the
  computer, connect to the Internet and run Microsoft update.
  There were 78 updates and 75 of them were installed successfully.
  (b) when I tried to install KB2656353, the installation failed with error
  0 x 643.
  (c) Googling turned up to http://support.microsoft.com/kb/976982 .
  I tried the Microsoft Fix it 50123, but which did not help.
  (d) I repaired then the .NET 4 Client Setup.  No joy.
  (e) I ran the auditor of .NET tool to
     http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspx

  And he noted "the check is successful" for
     
  .NET 1.1 SP1
  .NET 2.0 SP2
  .NET 3.0 SP2
  .NET 3.5 SP1
  .NET 4 client
  .NET 4 full

  (f) I have concluded that uninstall and then reinstall the whole .NET
  framework was not claimed for now, since it does not seem
  as indicated in KB 976982 corrupted.

  (g) I checked the registry for .NET 1.1 hotfixes listed issues
  in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
  in the "Info 9002..." section, but I have not found any.

  (h) I downloaded the update in a separate file,
  NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
  and tried to run as a standalone program, but it stops almost
  immediately.  By redirecting the logging to a local file, I find
  the update has not been installed, but I do not know how to interpret
  the log file, which is much too large to be able to post it here in its entirety.

  How can I get this update to install?

  Related post on the same question:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cant-install-update-kb2656353/744caf0c-4450-40DE-BB8F-cf4ca2ee565d

• How can I get rid of a virus if I can't download or remove anything?

  How can I get rid of a virus if I can't download or delete anything?

  There are a number of techniques that can be used.

  Looking for a portable antivirus or anti-malware that can be loaded on a CD/Flash drive on a system free from viruses and then physically move your infected system.  For example:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_PORTABLEFOLDER

  Restart in safe mode with network that can allow access to the removal of additional viruses on the net tools while preventing the virus to start and then interfere with your system.

  Request free assistance from the security of Microsoft Tech Support:

  http://supportservices.Microsoft.com/support/services/virus_malware_removal

  Request free assistance from the security community in malware removal Forums.

• Error 65535 and Turbo Tax uninstalls the product.

  Hello

  I'm having a similar problem with Windows XP Home Edition.  I try to install Turbo Tax 2010.  The product seems to install fine, but the final stages occurs an unexpected error 65535 and Turbo Tax cancels (or uninstall) of the product.  Turbo tax site suggested I install the .net tool I did, but he says that it cannot find the installation or the CD.  I did as you suggested and ran sfc/scannow and the system tells me that there are critical files from the Windows XP Professional Service Pack 3 that are not, please insert the disc 3.  Well I don't have any of the disks as installed as part of an update of windows Service Pack 3.  I cannot reinstall the product without uninstalling the current version through the Microsoft Update site.  I can do this, but my system gives me a list of programs that may not work once the service pack is uninstalled (I guess this would be corrected once the relocation takes place).  Is it possible that I can get around this?  It does not seem that I can download SP3 and create the CD or is it?  My computer is a Dell XPS.  Thank you!

  Hi Tax2010,
   
  You cannot run the System File Checker scan if you don't have a CD of Windows XP Service Pack 3.
   
  Try the steps listed in the following items:
   
   
  Troubleshoot installation and execution of TurboTax (Windows)
   
  Error code 65535: "unexpected error".

• Interoperability with web services

  Hello

  I created a Web service in .NET, which must be called from another Web (Server BEA) service as a Notify operation. I get a SOAP exception and I pointed out that the server (BEA) is able to connect to my web service (.NET), but the "Notify" method within my Web service is not triggered. [basically, I need to create a WS that will be called by the WS server on the success of a task]. I tried to compare the WSDL from the server and the one that is generated by .NET on my side, and they do not match.

  for example the server was and , but on my side .net tool has the same name of the = "Notify" operation, but the

  So basically, there is a difference... How to solve this?

  Thank you

  This is not the right forum for this type of question.
  Please post in the MSDN Web site using the issues of .NET.

  http://social.msdn.Microsoft.com/forums/en-us/categories/

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• my antivirus does not

  Hi I had used avg antivirus on my pc but it blocks we look out, I try to reinstall and get an error saying I have checked my privilege to change. How do I do that? What should I do to get it working?

  You can activate the built-n administrator account, and then try to reinstall. Please see here:

  Activate the hidden built-in Administrator account

  However, your antivirus program should not have been disabled in the first place makes me suspicious that malware can make these changes, that's why I advise you to run the Windows Live safety Scanner:

  http://OneCare.live.com/site/en-us/default.htm

  Clickfull scan Service.

  And run the MSRT here tool:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  You should also install, update and run a quick scan withMalwarebytes' Antimalware:

  BestTechie.net
  http://www.besttechie.net/Tools/mbam-setup.exe
  or
  MajorGeeks.com:
  http://www.MajorGeeks.com/malwarebytes_anti-Malware_d5756.html