net view \\addressIPserver fails with error 53
Computer, net view \\addressIPserver fails with error 53, while it works from b
If I restart the server, then it works.
-online what command can I enter to make it work again, without having to restart the server?
Server, computer, b are all seven windows
ipconfig/all shows that Netbios over tcp/ip is enabled
Hello
Tags: Windows
Similar Questions
-
Windows Update fails with error [error number: 0x800A0007]-which is not listed
Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system
The other post:
Thank you for your reply - but the problem persists - this is mopre complete info.
The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
Also your "Mr Fixit" was performed several times, but nothing changes.
Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
This is what is happening in the process of updating before it fails:
Keep your computer up-to-date
Check to see if you need updates for Windows, your programs, your hardware or your devices.Get updates of high priority (recommended) Select among the priority and optional updates for Windows and other programs
... and it does not matter if I say "express" or "custom" - headed then:
Checking for updates for your computer...but fails after a few seconds with the same message as follows:[Error number: 0x800A0007]The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. -However, it is the State of the system for more complete information for you:
Name of the operating system Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
MISCHU06BLUE system name
System manufacturer Compaq Presario 061
ED865AA - ABA SR1610NX NA540 system model
System Type X 86-based PC
Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
SMBIOS Version 2.4
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
MISCHU06BLUE\Compaq_Owner user name
Time zone Pacific Daylight Time
Total physical memory 1 024,00 MB
Available physical memory 468,50 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 1.51 GB
Paging file C:\pagefile.sysPlease get us some help to solve this problem.
What else can I provide?I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?
[This applies to your recent 'me, too' answer to another thread.]
-
I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?
Diagnosis of network adapter
Network location detection Info Using the Internet connection at home Identification of network adapter
error Failed with error 0 x 80070424: the specified service does not exist as an installed service. HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection. Diagnosis of last run time: 16/05/12 16:09:47
Diagnosis of network adapter
Network location detection Info Using the Internet connection at home Identification of network adapter
error Failed with error 0 x 80070424: the specified service does not exist as an installed service. HTTP, HTTPS, FTP Diagnostic
HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection. Thanks for your attempt to solve my problem.
Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?
-
KB2656353 install fails with error 0 x 643
Dear Microsoft support community,
(a) I have Windows XP Professional SP3. I haven't used this computer
in almost a year, so the first thing I did was to hang the
computer, connect to the Internet and run Microsoft update.
There were 78 updates and 75 of them were installed successfully.
(b) when I tried to install KB2656353, the installation failed with error
0 x 643.
(c) Googling turned up to http://support.microsoft.com/kb/976982 .
I tried the Microsoft Fix it 50123, but which did not help.
(d) I repaired then the .NET 4 Client Setup. No joy.
(e) I ran the auditor of .NET tool to
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspxAnd he noted "the check is successful" for
.NET 1.1 SP1
.NET 2.0 SP2
.NET 3.0 SP2
.NET 3.5 SP1
.NET 4 client
.NET 4 full(f) I have concluded that uninstall and then reinstall the whole .NET
framework was not claimed for now, since it does not seem
as indicated in KB 976982 corrupted.(g) I checked the registry for .NET 1.1 hotfixes listed issues
in http://blogs.msdn.com/b/astebner/archive/2004/11/23/268934.aspx
in the "Info 9002..." section, but I have not found any.(h) I downloaded the update in a separate file,
NDP1.1sp1 - KB2656353 - X 86 .exe, to http://download.microsoft.com,.
and tried to run as a standalone program, but it stops almost
immediately. By redirecting the logging to a local file, I find
the update has not been installed, but I do not know how to interpret
the log file, which is much too large to be able to post it here in its entirety.How can I get this update to install?
Related post on the same question:
-
Vista premium sp2 updates fail with error 80070643 dt000
Vista premium sp2 updates fail with error 80070643 dt000 I tried to fix the profile of .net framework 4 cliemnt but not resolved. It cannot update update software & MS updates almost obsolete year now. Ideas anyone please?
Hi Ruth,
Error code 80070643 is a generic error that basically indicate that an error has been detected by Windows Installer.
Method 1:
You can perform the steps described in the article.
You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update web sites to install updates
http://support.Microsoft.com/default.aspx/KB/958052If you have performed the steps in clean boot mentioned in this article, don't forget to put the computer to a normal startup by referring to the section "How to return a normal Windows startup mode" in this article once the diagnosis is complete
Note: If you have already completed the steps in this article, you can go to the next method.
Method 2:
You may need to restart the Office Source Engine (OSE) service
Windows Update error 80070643
http://Windows.Microsoft.com/en-in/Windows-Vista/Windows-Update-error-80070643
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-problems-with-installing-updates
Hope this information helps. Response with status so that we can help you.
-
System analysis tool update fails with error 0x800704c7
After having the problem that Windows Update crashes on 'check updates', I followed the recommendations on http://windows.microsoft.com/en-ca/windows7/what-is-the-system-update-readiness-tool, installed the preparation tool system update, but unfortunately after several hours, it failed with error 0x800704c7. What can I do now?
I'm on a Toshiba PC with Windows 7 professional service Pack 1 32-bit.
If looking for updates to hang on a current installation,
Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.
4.5.2 is more consistent to have installed,
https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642
Switch your windows update setting to never check the updates temporarily
Restart the machine
You can try and install the latest client update manually let your update settings to never check for updates until you install it.
https://support.Microsoft.com/en-us/KB/3138612
Then you download this from your download folder run from there.
https://TechNet.Microsoft.com/library/security/MS16-039?f=255&MSPPError=-2147217396
Download the x 86 for 32-bit or x 64 for 64-bit
Install it and restart when prompted too after he did a search of stand-alone for updates that should not
take too long, it took all of 5 seconds, '' If '' windows update settings are turned on forever check
updates before running from the downloads folder.
Once it installs and restarts
You can reset your updates affecting everything you had before default =...
Then check the updates manually.
I think that the solution came from Softpedia and Joel_CS posted on this thread,
http://News.Softpedia.com/news/Windows-Update-hanging-when-downloading-April-12-patches-502886.shtml
You must scroll down for Joel SC post threads, it is the last answer on this page,
-
I tried to run the .NET framework. All files are downloaded, but finally the installation failed with error code: (0x80070005)
NET FRAMEWORK 4 fails installation
1) download setup of .net 4 by http://www.microsoft.com/download/en/details.aspx?id=17718
2) double-click the downloaded file to start the installation
-
I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:
1 PC is powerful enough with i7 and 16 GB chip.
2. new SSD this week.
2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.
3 Ran install successfully and signed using my Microsoft Account.
4 tried Windows Store for Windows 8.1, but said I need updates.
4 Ran Windows Update in Control Panel.
5. Windows update found 127 updates and they failed with error code 80248007.
I don't understand how I can get these failures with a new facility.
Any help will be greatly appreciated. Thank you all in advance!
Hello
Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...
They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...
-
Backup failed with error 18: the backup drive is not found
Hello
My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.
So far I have tried:
-Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac
-Remove TimeMachine.plist and restart my mac
-Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).
I share this time capsule with my wife and she has no problem with that.
I can only think of a possible alternation I did which could cause this problem.
Because of unstable WiFi problem, I had deleted
com Apple.Airport.Preferences.plist
com.Apple.Network.identification.plist
NetworkInterfaces.plist
Preferences.plist
or other files and reboot my mac * before * I had this problem with time capsule.
However, this is not the first time I do it, and it wasn't a problem before...
This could be the reason? If so, how to restore the network settings?
Please help me with this problem. Really appreciate!
Ted
Here is a copy of the Console:
24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup
24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias
24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data
24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data
24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)
24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup
24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.
24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data
24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.
24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21
24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)
24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup
24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)
24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.
24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc
What model is the TC?
Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.
(You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).
Also give me some screenshots of the TC installing airport utility.
Can you get it in the Finder?
-
Update for Microsoft XML Core Services 4.0 Service Pack 2 for x 64 systems (KB973688). UPDATE FAILS WITH ERROR 652, ENCOUNTERED AN UNKNOWN ERROR.
Download size: 5.4 MB
Update type: Important
Jim,
Take a look at this article and see if applies: Mike KB971187 - engineer Microsoft Support responses
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 2008 SP2 installation failed with error code 0 x 80041002
Hello
I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.
I tried the steps in http://support.microsoft.com/kb/947366:
1 uninstalled antivirus.
2. install KB947821 analysis tool
3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en
Without success. What should he do next?
Thank you
Frank
Hi Frank_673,
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.
Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Update of security for sql server sp3 KB94981 fails with error 2B 33
Each update for SQL Server 2005 on my computer Vista Home Premuim fails. The most recent example is:
Update of security for sql server sp3 KB94981 fails with error 2B 33
for SP2, it was
Security for sql server sp2 KB960089 update fails with error 6AA
Other updates have been ad are successful, although I found out recently that it is the recovery disc option to create under maintenance contract. I fdound the recdisk.exe file, but running it does nothing.
Mike
Maybe check this forum:
SQL Installation of Server & upgrade
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/TaurArian [MVP] 2005-2010 - Update Services
-
Vista SP2 x 64 install failed with error 80004005
I tried to install the SP2 for Vista X 64 (KB948465) four times. The most recent installation attempt failed after
(1) created a new administrator account and did the following...
(2) uninstalled CA Antivirus Suite (no other antivirus installed).
(3) stop the Windows Update service, renamed %windir%\SoftwareDistribution for... \SoftwareDistributionOld, restarted update service, restarted.
(4) installed and run CheckSur (can provide the journal).
(5) restarted in clean boot mode.
6) attempted to reinstall SP2.In all attempts, installation seems to be completed, during the restart of the installation of all 3 full updates to 100%. However, the message then States that the installation failed and the original configuration was recovering.
I have a new a6700f desktop HP Pavillion, AMD Phenom X 4 9150e Quad Core clocked at 1.8 GHz, 4 GB RAM, 500 GB HARD drive; Windows Vista Edition Home Premium x 64 SP1, nVidia Quadro FX 370 video card.
Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
http://support.Microsoft.com/kb/971204 TaurArian [MVP] 2005-2010 - Update Services -
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?
Run the automatic fix here and try again once the update manually by downloading it from HERE
-
Using the internet connection at home:
Identification of network adapter
Error failed with error 0x8007007E: the specified module could not be found
Hi JimQv,
Check to see if the following is useful.
Method 1: Run that this automated convenience store and look for the question.
Improve performance and security in Internet Explorer
Method 2: You can try to optimize Internet Explorer and see if it makes a difference. Follow steps 2, 3 and 4 of this article.
Maybe you are looking for
-
Outlook shortcut icon does not open
When I try to access outlook via a shortcut on my desktop, I get a message (this application has failed to start because its side by side configuration is incorrect). I can still access my e mail when I go to outlook directly. I have another shortcu
-
I am also unable to send email from my msn account because it says 'Unauthorized attachment' when I don't join anything.
-
How to get tickets Kebores initializtion via VPN
How to get the ticket of Kebores initializtion via the VPN for Single Sign on
-
I have no sound after installing Windows XP.
Audio... No sound! I formatted the hard drive and intalled win xp pro, now it tells me I have no audio device, please help!
-
HP Pavilion 15-b142dx Sleekbook My girlfriend wanted the nightmare of windows8 pre-loaded on his machine and downgraded to windows 7. I have problems with the NIC, its all just not there. Any help?