net wifi is often broken

wifi net access is often broken, then I have trouble shoot problems, when it is repaired, a report can be established, the report name is called DAA602E3-29EB - 47 7-A60B-A42A552DAF18. Repair.Admin.0 so what can I do to solve the problem?

Hi kaixingz,

1. what operating system do you use?
2. don't you make changes to the computer before the issue occur?
3. are you connected to the domain?
4. do you get an error message?

Try the steps from the following link:

Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

Tags: Windows

Similar Questions

  • iPad Pro wifi disconnects often, using ios9.3.1

    I just bought this amazing iPad 12.9 ", my home network through TWC, never have problems with the two adolescent, wif, TV with wifi at the same time. Now it's after hours, and my wifi disconnects on a regular basis. Any thought beyond reboot and wifi switching power to re-establish the connection. Y at - it an idle wifi setting that I missed? Thank you

    Hello...

    Follow the instructions here > to connect to the Wi-Fi on your iPad, iPhone or iPod touch

  • the net wifi works enthernet no work for windows Vista premium edition

    I had the laptop model hp g60-243 cl

    p/n nb264ua #ABA

    enthernet no work

    NET works without work

    I'm looling for loading for reader software

    everyone knows it please hepl me

    Thank you

    try to use the 32-bit driver for windows 7

    Alternatively you can downlode a net application named DRIVER PACK SOLUTION 12.3

    Good luck

    < < <-INCLUDING 4GET to CLICK the STAR of KUDO ON THE SIDE of RIGHT TO SAY Thank YOU IF I HELPED YOU.
    I AM NOT AN EMPLOYEE OF HP, SO YOUR ANSWERS ME GIVES THE INSPIRATION TO CONTINUE IN THE FORM...

  • WIFI disconnects often HP Pavilion Notebook of 17-e020dx

    Laptop HP Pavilion e020dx 17

    Well, my previous post has disappeared.  Maybe it will stick.

    My wifi disconnects several times a day.  All other days the wifi adapter cannot find any router signals at all. It has been happeneing since.  I dropped the HP support because they never fixed ths issue and now the warranty has run out.  In any case, I can get along by turning the Wifi turned off/turned on when he leaves the connection and restarting the laptop when the adapter fails completely.   I hope this helps someone.  Number of messages that a new adapter resolves the problem, but HP will not approve a.  Naturally I won't buy HP again.

    I don't know which driver you have installed or what operating system you're running, but parts of her list of States your model comes with a Realtek RTL8188EE 802.11bg / n 1 x 1 WiFi adapter.

    Specifications of product for your laptop says it comes with the W8.

    Most of the people have updated to the free W8.1 through shop Windows.

    If you have a such update, here is the link to the latest version of the W8.1 driver for your model that is newer than what's on the support page for your model.

    Maybe Realtek finally worked the bugs out of wireless driver.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_139278_1

  • Toshiba Excite Pro - WIFI dropouts very often

    Hello

    I recently acquired a toshiba excites pro 16 GB tablet.
    The problem is that I * disconnections wifi * very often, so that all my other devices still connected at the same time.

    When falls the wifi, it is very difficult to reconnect even if I restart several times the Tablet (perhaps after the fifth, but it remains not connected for a long time).

    If I stop the Tablet for a while then I connect immediately - until it disconnects.

    I already get into recovery and restored the tablet with no result.

    Any suggestions?

    Try this:

    Go to advanced wireless settings and check if + WMM + is activated.
    This option must be checked to have a stable connection between the Tablet and route

  • a reason for adding the station wifi?

    I have a mac additional wifi station and I got it in my living room where, on the net, I get a lot. the time capsule that broadcasts my wifi is in the office down the Hall.

    adding the station wifi in my living room will help with a question that mail get hung up and not updated?

    This will help the speed of my connection?

    I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

    THANKS for any help

    adding the station wifi in my living room will help with a question that mail get hung up and not updated?

    Unlikely.

    This will help the speed of my connection?

    Maybe, probably not.

    Is your Mac faster when near the time Capsule, when in the living room?  There is a good chance, with a local access point will help.

    When you look at the WiFi menu bar icon.  You have full bars (good), or is it partial (perhaps a repeater would help)?

    If you 'Option' click the WiFi icon is your in-30, - 40, - 50 RSSI value '?  and your noise value in the - 80-90, you are actually pretty good.

    Then chances are that you get a signal strong enough.

    You can check all the contradictory signals in your area via 'Option', click the WiFi icon--> select Wireless Diagnostics

    In the Wireless Diagnostics menu find "Utilities", then select the Wi - Fi Analysis tab, or the menu will just sweep "Wi - Fi", you choose (depends on when Apple changed the Wireless Diagnostics menus.

    Performs a Scan of Wi - Fi will show you your's and your neighbor's WiFi access points.

    You want to focus on the channels, the RSSI and sound columns.

    Channels: You don't want to use the same channel as a neighbour, unless their SECURITY is very low (-70, of-80 to-90), _and_ your RSSI is strong (-30,-40,-50).  If it is a 2.4 GHz channel, you also a 5-channel separation between you is your nighbor harder.  Channels 1, 6 and 11 do not overlap and are common choices, especially if you have several access points in your home.  Once again, if the neighbors have weak signals, you don't really care, because you interfere not with them, and they do not interfere with you.

    5 GHz channels do not overlap and are also much faster than the 2.4 GHz channels.

    But that doesn't mean that you do not want to play with this material.

    We know the Apple Time Capsule.  Is the "wireless Station" an Airport Express?  Or some 3rd party WiFi router/AP to access?

    If an Airport Express Terminal, you can use Airport utility to extend your network.  Is not ideal, but easy to install.  Just make sure when you put the Airport Express is a place where it receives a good signal of the time Capsule, otherwise it's just trying to spread the wrong signal as it gets.  Wireless diagnosis can be useful to identify a good location.

    A performance-based approach is to run the Ethernet of the time Capsule to what is your WiFi Station.  Set up the device, then it shuts down its functions of router (Apple calls this 'bridge', other Mode to do this disable you DHCP and NAT services).  You give the WiFi Station a different channel (see above discussion of channel overlap).  You give the WiFi Station the exactly the same WiFi (SSID) name and the password.  Now you will have setup a network of 'Roaming', where the devices will pass you to a different when access point channel it uses currently becomes too low.

    This will help the speed of my connection?

    Another criterion for speed, is how fast your ISP connection vs how old is your WiFi router.

    If you use 5 GHz channels, you can then begin to worry about this when your ISP speed starts to become well above 50megabits/s

    If you use only 2.4 GHz channels, 15-25' ish speeds are OK on 802.11 g.  802.11n is a little more efficient and can tighten increasingly close to 40-50' ish speeds.

    If you have more than 100megabits per second, you want to have a router with 802.11ac protocols up-to-date and a newer Mac with 802.11ac support.

    This requires that you are the only consumer of your ISP connection.  If you share with your family, and there are lots of type YouTube and Netflix streaming, so your Mac doesn't have to have 802.11ac, but you don't want to a fast router in support of all the other devices sharing the bandwidth.  In this case a 2nd access point connected via ethernet can help share the problems of band radio bandwidth.

    I originally bought it for the trip, but I'm not find much use for it on the road and am thinking of using it at home.

    I have access to 5 GHz 802.11ac very cheap $10 point (not a router), I take with me.  I plug it into the ethernet port on the hotel or a router condo rented for give me a channel which is not sung from neighboring access points and shared connections.  I find that the hotel WiFi is often low, and you share the connection with a ton of other guests.  In a rented condo, you have tons of other condos all competing for 2.4 GHz channels (co-owners often get a cheap router 2.4 GHz 802.11 g, so everyone tries to find a channel not used).  Having my own 5 GHz WiFi access point means that I have no need to fight with others for bandwidth and the right channels.

    Just thought I'd pass that along.  And the wireless diagnostic tests are a great way to find out what the competition is where you stay.

  • Y50 - 70 - Wifi internet lose

    Hi, ive on lenovo y50-70 portable wifi problem.

    Very often, my internet speed is very slow or completely lose connection to the router but it is fine (router works great, other devices has problems). I tried many drivers - w10 autoupdate, last official driver site and hp drivers lenovo. Second book ive - hp probook g2, same card WiFi (realtek 8723be) and same ms w10 and there are no problems.

    Adapter WiFi isn't broken - earlier I had w7, now ive 2nd os linux and it is ok.

    Anyone have same problem or solution?

    Mod edit: System model added to the front of the subject line to improve visibility / clarity.

    This work is driver for w10x64 rtl8723be

    2023.42.831.2016

    Mod edit: Please keep in mind that these forums are accessible by people of all ages. Blasphemy, implied profanity or swearing bypassing attempted the profanity filter is prohibited by the Rules of the Forum have been removed.

  • It is possible, replace the antenna internal wifi iphone 5s?

    My iphone 32 5 s is perfect, like new, but since yesterday the anntenna internal wifi is broken. We can replace it in an apple store?

    I'm sure that the wifi antenna is broken is not a software problem.

  • Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

    Hi guys,.
    Since a few days my wifi stopped working.
    If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

    And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)



    If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:



    My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
    Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).

    I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
    I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.

    I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.

    HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

    This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked

    I tried different settings too:
    I changed the channel, I put 802.11 g on my router, APSD off on the router.
    I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.

    The hardware test detects any failure.

    Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
    In this case, it shows my network (connected) and the nearby... and the other 20 networks +?

    The only way I have is USB tethering with my Nexus 5.

    Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).

    -------------------------------------------------------------------------------------

    What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

    WAWood,
    I took a risk.
    I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
    I had to switch from Win8.1 to 10, but the Wifi problem is solved!

    I'm still guessing that was the problem...

    Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.

    In the next few days I'm checking the linux problem (reset deleted primary partition).

  • Satellite P50t-A0EE - WiFi limited connectivity

    Help please before I do something for my new Toshiba P50t-A0EE.

    I can connect to the net via my router if I use a network cable to my Netgear DGN2200 ADSL unit.
    I can connect to the net via my phone Galaxy S2 via WiFi for my Toshiba.
    I can connect to the net through 5 other computers in my house using WiFi and my Netgear DGN2200 ADSL unit.
    I can get the net wifi with my phone too.

    BUT I can't access Internet via WiFi on my new Win P50t-A0EE Toshiba 8.1.
    It does not seem to connect, but when I try to access the net, he returned with limited connectivity.

    I unchecked the box on the wireless card in the computer where it is said to use the power control.

    If someone smarter than I beat it?

    Regards Bob

    Hello

    These and similar questions of WLan can be resolved for the most part by WLAN driver update.
    Have you tried to update the driver WLan?

    I'm not very well the laptop supports the card WLan, but this can be verified easily m.
    Go to-> network adapters Device Manager
    You will find information on the LAN and WLan cards.

    If the laptop supports Intel WLan card, trying to get the most recent update of Intel page.

    Greetings

  • 3 Yoga does not connect to wifi

    Hello, I got of my 3 Yoga a few months now and have had a recurring problem with the WiFi. Often, when I close my laptop and he goes to sleep, the next time I try to use WiFi not connecting. This happens sometimes when I'm in the middle of using it. There is a red X on the WiFi icon and when I click on settings says 'no networks detected.' No matter how many times I turn the WiFi works, he refuses to find all the networks. When I restart my computer, it works very well and will connect to my school's network automatically as it should. Any ideas as to why it disconnects and refuses to find my network? It's annoying to have to restart my computer everytime I want to use it. Thank you!!

    Go to the control panel

    Click on Device Manager

    Under the network adapter, right click on the wireless adapter, then click Properties

    Go to the power management tab, and clear the "allow this computer to turn off this device to save power".

    Click on the OK button, close all windows and restart.

  • ENVY 15-k086ng: lack of card Wifi network

    Since a few days now, my Wifi no longer works. The adapter is not listed in Device Manager (not under "Network adapters" and not under "Other devices"). I installed "Button Driver Wireless for Windows 8" (version 1.1.2.1) as well as "7260/3160 Intel Wireless LAN driver for Microsoft Windows" (version 17.0.0.34) (at least the HP Recovery Manager could reinstall for me). I noticed that the HP Recovery Manager will also update the "Intel 7260/3160 Wireless LAN driver for Microsoft Windows" to 17.1.0.19 version. I did once, but after the restart he showed the same update again. So here's my question: is it possible that my Wifi module is broken or also is it a software problem?

    Please do not hesitate to ask for more information if necessary.

    Hello:

    It is very possible that the hardware has failed.

    If your laptop is still under warranty, that I recommend you contact HP technical support and drop support under the warranty.

    Normally I would recommend trying to remove and reseat the wireless card but on your model, it is very difficult to disassemble and void you the warranty if you try yourself to work on it.

  • Iconia Tab W510 driver issues (WiFi)

    Hey there,

    I am an Iconia Tab W510. Very nice, works well - I thought. I have the version with 32 GB. It is a device of demonstration, since it is the last of them was the store. Just like I wanted a Win8 clean and fresh installation I did full recovery for a long time through these 4 discs.

    He worked in nice, but gave me an error as it began after full recovery. I guess it was on this custom in the OEM package software. The error message was "C:\Windows\System32\OEM\AlaunchX\AlaunchX.exe a referral was returned by the server.

    This message is not the problem, but it may be important to find a solution.

    After clicking 'OK' - as if I had another choice -the normal startup tab and I can use it. What I saw then was that, under the leadership of the unit, there are four devices without drivers. I downloaded the package of more recent (and updated the BIOS) driver from the acer homepage. The version of the driver package was 3.01 and the BIOS version is 2.00.

    I installed the update of the BIOS at the beginning that surprisingly installed all the drivers missing. The broadcom drivers have been installed, there's no any errors during installation, but both, the SDIO of Broadcom 802.11abgn Wireless adapter and the Bus driver Broadcom series on UART Bus enumerator do not work properly, because they are marked in the Device Manager with yellow warning sign. The message for two devices in Device Manager says: "this device cannot start (Code 10)".

    I had a white night that without being able to find the solution. With the two drivers not working not properly the WiFi does not work, of course. And without a working WiFi this tab is... Well it's pretty useless to me. I read a lot of problems with this tab and its WiFi behavior but apparently not that somebody had the problem that I described here.

    If anyone have a solution for this, I would be very grateful. Since it is a nice tablet, I really want to keep it, but which is not not WiFi works its really useless. So: any ideas how to fix this mess?

    Greetings

    I've chatted with acer yesterday and told them what I've done. They came to the conclusion that the WiFi module appears broken, so I should send him my tab for repair.

    The last thing I tried was install Windows Pro 8.1 and using drivers Win 8.1 from the support home page. He gave me the same error with two Broadcom devices once again, so it may not be a corrupted driver.

  • WiFi connection disconnects randomly.

    Original title: WI - FI dropouts

    Hello

    I use dell Inspiron 15r and there intel centrino wireless wifi n-2230 adapter when ever I start to surf the net or download from the net wifi disconnects I have to solve the problems to operate again the repetitions of the process for every 2-3 minutes .i have the last drivers for the adapter that I downloaded from intel website.i am not the only one facing this problem most of them using this adapter has the problem.because of what I am able to use internet properly .i contacted support dell several times but even they could not solve this problem. Please help me...

    Hi Kumar,

    For a better understanding of the issue, I would need more information on your side.
    1. do you receive any error messages? If Yes, what is the full error message?

    2. did you of recent changes on the computer before this problem?

    This problem could occur due to these reasons.

    1. Because of the incorrect wireless network settings.
    2. Because of network wireless driver damaged.

    Try the steps listed below and see if it helps.

    Method 1:

    I suggest you try the procedure described in the article and see if it helps.

    Method 2:
    If the problem persists, I suggest you try the procedure described in the article and see if it helps.

    Wireless and wired network problems

    Method 3:
    If the problem persists, I would suggest temporarily disable you the antivirus or security software. Check if it helps.

    Warning: security software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • Problem WIFI (no internet access)

    Hello, guys. I week ago I had a Pavilion dv4 (dv4t - 4100) with Intel 802.11b/g/n WLAN. He connected nicely to my router when tonight, he began to show "no internet access", even if the computer recognizes the router and says the signal is at 99%. I guess that a link in the process of WiFi connection was broken at a given moment. It happened between creating a new user account and maybe installing Safari browser. I'm not sure. Or it could be hardware, but nothing shows up in the analysis of troubleshooting or in Device Manager.

    To the HP Support Assistant, shows as follows:

    Microsoft Virtual WiFi Miniport Adapter connected #2-non
    Microsoft Virtual WiFi Miniport adapt - not connected
    Intel(r) WiFi Link 1000 BGN - wireless network connection
    Atheros AR851 PCI-e Gigabit Ethernet (NDIS 6.20) controller - not connected

    The HP network audit, indicates the network in my local router information, internet IP address: not available.

    I'm really confused, because I can not deal with same software that manages my WiFi connections. I found "Intel My WiFi Technology", also "HP Connection Manager" and especially WiFi connections to the taskbar. Then, we should I use and set?

    My questions are:

    (A) if I was using internet without opening 'Intel My WiFi Technology' and 'HP Connection Manager. Do I really need these software? Why are they in my book and why should I activate them?

    (B) if it is important to use one of these programs mentioned above, or both, why and how should I use if I connect to the internet without problem before? And it will restore my internet connection?

    (C) what WLAN module I have? It is said in my order Intel 802.11b/g/n WLAN. It is said in the HP Support Assistant Intel(r) WiFi Link 1000 BGN. Are they the same?

    (D) after identification of my WLAN module, where can I find a driver for it? Because one of them must not be found anywhere. I am in my second built-by-me-bench and I never had trouble to find a drive. For some reason these names I have mentioned do not exist in the list of drivers to Intel. I tried the HP site, but it's too complicated and it seems do not have this key WLAN.

    (E) at the end, how is the best way to connect to the internet and how do I configure my phone for a first and fast connection? Or I have to do anything and I just need to fix something to go back to where it was before, when I was using internet without problem and in a simple way?

    Summarize: I'd love to see a feature more late who says: "connecting dock", where all possible means of connection, WiFi and cable, can be defined in a single window, with simple and clear tutorials.

    Moreover, I like the laptop. Well done, cute, smooth and not full of blotware. I also loved access to all material, simple as a click of the fingers. This will be very handy when I replace the HD for one SSD and mix in a Blu - Ray player. But is a pain.

    Well, I really, really appreciate all responses.

    See you soon,.

    It's the software antivirus (Avast). For some reason when I created the new account, the Avast did not load the new settings and blocked the internet (don't ask me how).

    I uninstalled and tried to establish a connection and I got the same 'no internet connection' icon, but when I tried to open Safari the network is is behaved as if was the first time that I accessed internet. A WiFi window pops up, which I closed, and the internet connection has been restored. Now I'm going to reinstall Avast from scratch.

    Detective Conan.

Maybe you are looking for

  • Dodge stopped working in iMovie10

    I'm in the middle of a project where I've used audio Dodge to cut the backing track when a voice-over comes on.  Everything worked well for the first two, I tried, but now NONE of them work.  I have the box "Low Volume of other music video" checked a

  • How to restore my Equium U300 to factory settings?

    Help! I followed the press i.e. instructions F8 at startup Toshiba up to engage the HARD drive recovery process, but when I get to the screen "choose a recovery tool" option at the bottom must be Toshiba HDD recovery or Toshiba Recovery Wizard but mi

  • Can I install my old windows cd

    I got a Dell Tower, who got a fake windows on, I have the windows of my old pc disk, but do not have the certificate of authenticity to go with it, it is possible to put on the Dell genuine windows, or should I scrap just the dell (my old tower had p

  • Large files, with the signature on each page

    Hi, I'm trying to find a good solution to get my boss who is on the road a lot to seal our architectural drawings.  The files are large and often have a lot of pages.  (my current project is 21 pages and measures 15 M)... I used before eSign by e-mai

  • HotSync fails at the opening session of Outlook 2003 is cancelled or fails

    Since the upgrade to a new laptop, I have not yet synchronized my Z22 to Microsoft Outlook 2003 via the USB port. I installed Palm Desktop and HotSync Manager 7.0.2 from the web site. The HotSync log says: Synchronization of Outlook calendar is compl