NetBook Asus Eee disconnects me from the internet whenever it goes into sleep mode.

Similar Questions

• Then the computer file transfer goes into sleep mode

  Original title: stop windows sleep/hibernation

  I need to transfer files from my PC to laptop. However when idle and waiting transfer via network lan my laptop will be slowed down and complete the connection. How can I stop this? Running Windows 7

  Hello

  
  Perform the steps to disable sleep and hibernation below and check if the problem persists.
  
  a: start Power Options of Type in the search box and click on enter.
  b: Now click on change plan next to Balanced (recommended) settings.
  c: now click on change advanced power settings.
  d: Now, Expand sleep option and then under sleep after and Hibernate after, set this parameters Never
  e: then click on apply.
   
  Also check out the following link
   
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions 
  
  Hope that helps.

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Satellite Pro C660 goes into sleep mode, even if I use Internet Explorer

  When you use Internet Explore particularly in webmail or remote access, the computer does not recognize typing and goes into sleep mode.

  I've updated the BIOS and it is not fixed.

  Hello

  Before talking about possible fix or workaround solutions, could you please give some info on your laptop model and the system?
  Have you tested the laptop with the factory and preinstalled Toshiba system parameters?

• 64 bit Vista crashes when the system goes into Sleep Mode. Have cold start. Simultaneous began with the June 8 patches.

  This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue.  The hard drive worked without interruption after that.  I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover.  OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates.  I looked at the Windows Update settings and it has been set to automatically install updates.  It is quite possible that the user did not know and did not recognize there are pending updates.  Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it.  There may be registry entries need to be corrected?

  Duane G. Leet, Ph. d. 45 years of experience in technology

  Microsoft support has provided a solution.  Here is the procedure:
   
  We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
   
  Step 1: Launch the tool to reset Windows Update and the update of the system tool
  ====================================
  1 download and run reset Windows Update Tool from the link below:
   
  http://go.Microsoft.com/?linkid=9665683
   
  2 download and run the update tool of the system from the link below depending on the Type of system:
   
  Update for Windows Vista 32-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
   
  Update for Windows Vista 64-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
   
  Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
   
  If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
   
  Step 2: Download the installer of Windows Vista SP2 Standalone
  ===========================================
  1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
   
   
  Step 3: Install Windows Vista SP2 in clean boot Mode
  =========================================
  Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
   
  1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
   
  Note: Click 'Continue' if the "User Account Control" window appears.
   
  2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
   
  Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
   
  4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
   
  To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
   
  If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.

  +++++++++++++++++++++++++++++++++++++++
  The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time.  The installation process was probably longer than the time that the system has increased...  Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error.  Duane G. Leet, Ph. d. 45 years of experience in technology

• What can I do if the TV turns on and goes into sleep mode? Standby blinks 9 times

  Model KDL-46xbr2 power button press that TV is available on any photo goes into sleep mode which flashes 9 times stops and continues to blink 9 times

  Where is the help people?

• When my computer goes into sleep mode, I have to press the power button to turn it back on.

  original title: sleep/hibernation

  When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

  Can someone tell me how to solve this problem, as if it was before?

  Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

  HTH,
  JW

• Monitor goes into Sleep Mode immediately after the connection to the motherboard

  Hi all

  My problem is like this.

  I have a desktop crt monitor. When I give power to it without plugging it into the motherboard, it's showing a message 'no signal' all the time and never goes to sleep mode.

  But when I connect it to the motherboard, the monitor goes into sleep mode immediately. When I delete the connection of motherboard once again, it's back mode 'sleep' and saying 'no signal 'again.

  Any other monitor works well with this office properly.

  This same thing happens when I am trying to connect this monitor to my laptop as an external display device.

  What could be the problem?

  Kind regards

  James

  Hi Ty,.

  I suggest that you check the manual of the monitor to check the frequency of the monitor support.

  It seems that the monitor is defective because the other monitor works fine.

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• How can I disable my driver to disconnect me from the internet?

  HP G72 laptop product # XN517UA #ABA

  Windows 7 64 bit

  no error but the difficulty to keep the internet connection. I have T-mobile web connector and went wrong w/t-mobile, and they claimed that my driver is disconnect the internet connection.

  I made no changes to my laptop and all udaptes are up to date.

  deeR504 wrote:

  When I use a LAN connection I don't waste connection. It is only when I use my web connector that I lose the connection online. I just need to know if it's my web connector or the drivers. As I've mentioned before that I called T-monbile and they say this isn't the web connector because it has no problem connecting to the internet, it's the fact that he cannot keep a bc driver connection disables the web connector.

  I have the T-mobile 4 g rocket

  I have Windows 7 Home Premium version 6.1 (64-bit)

  If there is no connectivity problem with the connection to the local network, then the problem is most likely to be the firmware / software driver and/or web interface provided by T-Mobile with their dongle.

  Have you been to the T-Mobile forums to see if others are having problems?

  I found that other people know the firmware problems and connectivity. You are not alone. If your normal edge wireless works very well and the local network connection (wired) has no problems T-Mobile dongle is the problem. The dongle come with a warranty.

• Whenever my computer goes into sleep mode, I lose my internet connection.

  When I 'wake up' my computer, the internet icon in the taskbar seems to be connected, but it is not. When I diagnose the problem, it is said that he lost the DNS connection. I then have to reset the adapter, and it will connect. It loses connection every time "standby mode". Patches?

  mrslaurae,
  Thank you for visiting the Microsoft Answers community forum.

  Here are a few things to try to solve this problem:

  To clear the DNS cache:
  Click Start, type cmd in the search box, and then click cmd in the list programs.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  Once at the command prompt, type ipconfig/flushdns

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  http://support.Microsoft.com/kb/299357

  Disable IPv6:

  1. hold down the Windows key and type R, enter "ncpa.cpl" (without the quotes) and press enter
  2. right click on each network connection, and then select "Properties".
  3 remove the check mark from the box 'Protocol Version 6 (TCP/IPv6) Internet
  4. click on OK to exit the dialog box

  NOTE: You should do this for each network connection.

  Let us know if this solves your problem or if you need more information.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows wireless service turns off when the computer goes into sleep mode

  Windows 7 64 bit, HP DV4 laptop. Was working fine until the update of adobe reader may also have a windows update. Have since been uninstalled adobe reader software and reinstalled. Updated the qualcom wireless driver.  WLAN keeps logging service when my laptop goes to sleep. I can restart with services and it works again. Autoconfiguration WLAN service is set to restart the service for 2 trys.

  Hello

  . You receive an error code or message?

  Please follow the methods and mark the question below:

  Method 1:

   

  You need perform a clean boot to prevent possible ask contradictory from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below.   How to solve a problem by performing a clean boot? : For more information on the execution of clean boot, follow the link.

  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

   

  Method 2:

   

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 3:

   

  Why am I disconnected from my network? :

  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

   

  Method 4:

   

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  I hope this helps.

• Windows 7 computer goes into Sleep Mode while the activity of the system

  Hello, I have windows 7 premium.  I think there may be a bug that needs to scan, my system goes to sleep while there is the activity of the system.  For example, when downloading a file, do a virus or by post where analyze or defragment.  I believe that the year 2010 are the operating systems with the smart enough so that the system is active and goes to sleep during execution of these programs are active.  Can someone tell me if this is a bug or suggest software to keep the system awake while 'X' program options is actively running, for example if I do a defrag of HDD, I don't want to change power if the computer is running all night, only for 2 or 3 hours that the scan is running Once the program ends defrag'ing the systemit should then wait for the time set in power options and stop.

  Hello
   
  If there is no interaction from the user to a certain amount of time, the computer goes into a sleep mode was
  application runs in the background. This isn't a bug. You may need to change the settings for options of power as a result.

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
   
  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor does not work, and the also.when of keyboard that I turn on my screen a message appears saying monitor going to sleep, then it goes into sleep mode.

  monitor going to sleep, cant access windows because I have several times to get this message.

  Connect the computer to another monitor. If the problem goes away, replace the original monitor. Make troubleshooting even for the keyboard. If the problems do not go away, you probably have malfunctions in hardware on the computer itself. You can fix yourself:

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  On tests of hardware failures often alleged swapping parts by parts checked. If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). If possible, have all your data backed up before taking the machine into a shop.
  MS - MVP - Elephant Boy computers - don't panic!