Magnifying nto working!

Similar Questions

• MS point 5000 laser wireless mouse does not work, but scrolling and magnifying glass works

  My point of 5000 MS wireless laser mouse does not work, but work wheel Magnifier button and scroll.  What could cause this problem?  I there something wrong with the mouse or something should be cleaned?  This is the first question I had after 3 years of use.

  I have not any hardware or software changes, and the problem is constant, not specific to any application.

  I restored my system to my latest backup when the mouse was working, but it has not solved the problem.  The software update has not solved the problem.

  I installed a different mouse, which works very well. The wireless mouse does not work on another system, I assume that it's broken and I will replace it.

  Thanks for your suggestions.

• Select filtering with Group of results do nto work with aliases

  I'm trying to filter the results to obtain the result with number greater than one:

  select DEPARTMENT_ID,job_id, count(*) as cnt
  from employees group by DEPARTMENT_ID,JOB_ID having cnt > 1;
  

  Oracle returns the identifier not valid error for NTC. When I use this:

  select DEPARTMENT_ID,job_id, count(*)
  from employees  group by DEPARTMENT_ID,JOB_ID having count(*) > 1;
  

  Select the works. What is the reason?

  Because it is not allowed.

  If you are looking for "oracle in the having clause column alias" you would find that said. Several times.

  Such as the use of alias to columns in clause error

• Windows Magnifier works correctly, except that the window is opaque - cannot see through it.

  When I start the Magnifier it works well except that the window is opaque - cannot see through it.

  Hello Allen,.

  Something for to try you. Its called remove a wrong color profile. Go to control panel, then select color management. When this window opens be sure that the display on the main screen is your screen (monitor), then below make sure that the check box use my settings for this device is checked. Then scroll to the bottom of the page, click the color profile, and click on delete. Make your selection and click close to return back.

  How the Magnifier works now? Let me know if this solves the problem for you.

  Kind regards

  BearPup

• New update wiped out magnifying glass

  Windows 7 made an updat last night and this morning I went to turn on my calculator and it said something like win 32 error.  I am blind and cannot tell you with certainty. Is there a patch or an update, I need?

  See if the solutions in the following threads allow you to fix it:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-Magnifier-not-working-correctly/23cb5292-f5c6-47a7-9a3f-48f75612edf0

  also:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Magnifier-doesn

• 11 GR 2 - data pre-populated in the catalog not work.

  Hi Guyz,
  
  I need to pre-populate fields in the form process while increasing demand through the catalog of an instance of the application. However its nto working here, by providing the steps being follwed below. Did I miss something?
  
  -> Sandbox created
  -> Attached an adapter copies the form of process for form fields
  -> Regenerated through the user interface form view
  -> Ran «Catalogue Planner»
  -> Sandbox published.
  
  Now when I connect to the console of the identity and try to raise the value of fields of application are not visible. However, when I submit the form with empty values, this is store values according to the attached adapter pre-population and same details are visible to the user in my access.
  
  Now, why the values are not displayed when we open request catalog itself. ???
  
  Thanks and greetings
  Swati Pandey

  Yes, many others also was faced with the same

  -nayan

• Satellite L500-01u012 - problems of audio output

  I have a Toshiba Satellite L500-01u012 and I have problems with the audio output.
  When I plug a headphone or audio output in the audio output port, it does not neutralize the internal Laptop speakers.
  It's really annoying me and I wonder if there is a way around this?

  I have windows 7 Home premium 64-bit sp1 with all the latest patches to update, and I tried to remove, restart and then reinstalling the driver several times without success
  I also got the image of the plant cell to try to fix that and its still nto work.

  I downloaded the drivers from the toshiba support site, but they did not help

  Hello

  Is this something new or you have noticed this problem in the past too?
  Generally by default the internal speakers should be turned off when you connect earphones.

  I put t know what laptop do you have exactly (model number you wrote may not be the right) and what sound card is inside, but please check the audio options in the Panel.

• Problem installing for LW / CVI SP1 on 64-bit Windows 7. Error 1303 for Sevice OR update 2.0

  The installation program stop partially through with the next box

  NI Service 2.0 update:

  Error 1303. Installer hsd privileges sufficient to access this directory:

  C:\Programs can (x 86)-Instrument\Shared\Update National Service. The

  installation cannot continue. Log in as an administrator or contact your system administrator.

  The allowed options are 'Retry' and 'Cancel '.

  Michael nto work.

  Logged on with administrator rights. Also, UAC is triggered to beginning of the installation.

  Several other products NOT installed including LV 10, LV10RT, CVI RT and many other (academic SSP).

  Thanks in advance. Will try a reboot and reinstall but want to publish first with this error.

  Discount reset fixed everything. Sorry for the false alarm.

• Why is my, IMG the loupe show a black window on some websites

  I use XP, IE 8, Firefox &. IMG Magnifier
  When I enter my bank or building society and of ebay Web sites,

  There are other, the expansion window becomes black.

  On most websites the magnifying glass works well.

  Thanks in advance for any help

  Mocall

  Hi Mocall,

  Thanks for posting in the Microsoft Community.

  According to the description of the problem you found the black screen on some websites. I'll be happy to help you on this question.

  Step 1: I suggest to start the computer in safe mode with network and check if the problem persists.

  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.
  
  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• How can I remove hidden user

  Have an Aspire one that came with Win 7. Listened to MS and don't the 'Upgrade' to win 10. Living with a persistent problem of a user 'Jeffrey', it was on the PC before we got it.

  When I turn on the PC Jeffrey appears as an initial user, but we do not have the password so I have to select a second user.

  Have worked to try to disable or remove Jeffrey but the command net user does not show a user with this name.

  I have traced down in the registry under Winlogon this user, but still have no way to delete this user.

  Even did a reset of the computer, but that does not remove this hidden user.

  I really want to clean win it 10 OS thus created a USB startup key. but I'm hesitant to try a new installation that I read of others having problems with an installation clean attempt to win 10, but lose the key or having activation problems.

  I don't want to really not just delete the Winlogon key as I don't know what else needs this info.

  Jeffrey seems to be related to the field PC Acer so think Jeffrey is something that acer is responsible.

  How do I remove Jeffrey so I don't have to click before him whenever I start the PC?

  Write it down OR user aCER pc GOLD jEFFREY introduce yourself WHEN I RUN COMMAND NET so normal USER commands will nto work.

  I gave up and installed the USB clean

• Custom camera profiles have stopped appearing in LR4.3 and CR 7.3 on a MAC

  I have been using color corrector passport to create color profiles. I created 3 today alone, without any problem. The fourth is missing. I tried several times to re-record it he does not appear in Lightroom after a full reboot. The color Checker app allows me to see the file before it stores the files. I see that it is a folder called "cameraprofiles. I can see that the files are there. LR4 does nto pull them up once I restart it or the entire computer. The folder that contains the profiles is hidden I think because I can not find it directly. The location given in another announcement of nto work on a Mac.

  For some reason any profiles started getting saved in an older folder (LR3). I reinstalled the plugin twice because it failed the first time. I do not understand why he was working at a time and then started to save files in the wrong folder. I never found the file using many other wires. Threads cover the issue for users of PC very well but not well covered for MAC users.

  The solution to reinstall the plugin Color Checker Passport until you can see it in the export dialog Panel. It works from the Panel but do not work when you open the application of the PAC from outside LR4. (Remember that you must restart LR4 or Photoshop to see new profiles).

• Tracing a png - how to get rid of the background

  I imported a png image of a simple drawing of a man in black (as you can see on a bathroom door) with a transparent background and tried to trace it to a vector, but I can't get rid of the white background. I tried it in jpeg format to see if the route command would generate two thicknesses for the main drawing and one for the background that I could remove, but he di awaters. I tried to adjust the fuction just Trace expose but does nto work no more.

  Can someone tell me how to get rid of the background by drawing a simple image or to break the object to get the shape of the background?

  Kevin

  Use Expand in the menu object and then use the direct Selection tool to select the white and remove. You will need the transparency grid show be enabled in the view menu to see it.

• Elements9 / edition of windows 7 problem

  Hello, I just installed elements 9 on my windows 7, 64-bit computer. but I have a problem with that.  on the tools, when I click on the hand or the color picker or the magnifying glass. I have three small hands or three small color selectors and three Miss. This makes these totally unnecessary tools, (except the Magnifier that works regardless of the form there is) is this a known bug or am I missing something? Furthermore there is no problem with these tools with elements 9 installed on a netbook running XP.  any thoughts greatly appreciated

  TIA brighterpics

  Try this:

  http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#_Setting_the_Windows

  MTSTUNER

• minimum line width for printing

  Hi, I am looking to buy a color laser printer so that I can print my work - I create very detailed art that is designed to be fully seen under a magnifying glass works.

  Printers in my budget tend to have resolution of 1200 x 1200 dpi. does anyone know what the thinnest line/dot (expressed in points), it's that can be printed with precision to the resolution of the printer size? I found with my other printers if the printing line is thinner than the printer can handle, he just prints it thicker.

  Thank you.

  Hello

  Here are some results of the OKI 9600 toner printer test.

  PostScript, 1200 dpi, 121Lpi, based on test models in this doc:

  http://www.FHO-Emden.de/~Hoffmann/raster16052003.PDF

  The mires are vector graphics, a sufficient

  Zoom high for the consultation of the details (about 100%).

  All results by interpreting the prints.

  Page 9:

  Zero width of stripe, 0Y 0 M 0C 100K

  PostScript converts zero printable the smallest line width

  Width: line 1 pair and gap for each raster cell, approx. 121 pairs

  per inch (means: always recognizable about 120).

  The width of each line is 0.5· (1/121) inches = 0.5·25.4mm/121 = 0.1 mm approx.

  Page 10:

  Width of the small line. 0C 0 M 0Y 100K.

  Situation on p.9.

  Page 7:

  Width of the small line. 100 C 100M 100Y 0K.

  Three point inks printed on the dot, but slightly deviate due to

  Recording errors.

  An impression of about 90 pairs per inch.

  Page 8:

  Width of the small line. 80 C 80 M 80Y 80K.

  Situation as p.7.

  Conclusions:

  1. not the resolution in dpi, but frequency of LF in Lpi line sets

  line width minimum wmin.

  2. the width of minimum line, using an ink, is the same, no matter

  What percentage of ink (level) is used. Black lines cannot be

  is thinner than the gray lines.

  3. the minimum line width, using an ink, is approximately equal

  half of the width of a raster cell. wmin = 0.5· (1/LF).

  4. with the help of ink a falling-out appearance more. The thin lines are

  not so sharp. The line width must be larger than wmin.

  5. never use the intense Black of black lines.

  6. never use more than two inks for the lines.

  7. never conceive these charts in RGB.

  Additional information:

  For 1200 dpi and 121Lpi we have N = square (1200/121) + 1 = 100 levels

  by channel, approximately.

  If the toner printer should be 1200 dpi in one direction and 600 dpi

  in the other, then wmin would be always the same, but we had only

  50 levels.

  256 levels can be achieved by the image - or chemicals, but the

  actual number of levels will be smaller.

  Further explanation:
  http://www.FHO-Emden.de/~Hoffmann/colrend290800.PDF

  Cordially - Gernot Hoffmann

• Two problems in CS5

  Just installed CS5 and there are two things Photoshop does now that he did not have before and I find this very annoying.

  1. it used to be that if I hit the button clear my selection would disappear, replaced by the background color.  Now I get the fill dialogue when I hit Delete, it drives me crazy, sort of to reset the old?

  2. it was that I could maintain space + command to get the tool magnifying glass, so I draw a rectangle around the area, I wanted to expand.  However, it seems that the magnifying glass works only by clicking on.  When I try to draw the rectangle to define a specific area to enlarge, it expanded just a few times, as if I clicked several times.  How to perform a reset to get back the rectangle?

  Kevin

  1. Press Cmd + delete instead of simply delete (only on the bottom layers). Delete will work the old way floating layers.

  2. Select the Zoom tool and uncheck the box 'Zoom Scubby' in the options toolbar.