Netflix doesn't work is not on the new Vaio

Similar Questions

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Design the Standard CS6 Suite doesn't work is not on the new iMac

  I just bought the new iMac 27 ". Good looking! I've updated the OS 10.8.2 I ran that Installer DSStandard CS6 and whatever else it took place without a hitch. When I try to start anything but Acrobat, before unexpectedly programs I have not even the boot screen. I have repaired permissions.

  Any suggestions as to what I'm doing wrong?

  Yes, this occurs when users try to copy it to the applications using Time Machine or the Migration Wizard.

  Please remove the software using the uninstaller programs located in Applications/Utilities/Adobe Installers.  After that it's over, you want to follow up with enforcement of the CS cleanup tool.  You can find the details of its use in the cleaning of CS for Setup issues tool | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  Once you have completely removed software, then please reinstall from your installation media.  If you have further difficulties then please format the drive and only restore your documents and settings.  You will have more success to install with a clean drive.

• Pavilion g6 2301AX: System Restore doesn't work is not on the new HARD drive

  My factory installed HGST HDD is not short DST check, so I bought new internal HDD of WD5000LPCX. I did the recovery DVD windows 8 long ago and tested several times.

  The problem, I do face is, after I ran the system recovery (insert all 5 DVD then restarts Recovery Manager), I get the error "No found bootable media" when the legacy support is disbled. On activation of legacy support, begins the phase of installation of driver, but after a while, my laptop is stuck in a reboot loop. I left it for half an hour but he kept just reboot.

  Guarantee of the laptop is long gone. New installation of Windows 7 has worked well, showing everything goes well with the material, but I want my Windows 8. Help.

  He resolved myself: had to convert the GPT MBR partitioning system.

  As this community seems inactive, I'll post like how to convert to GPT:

  NOTE: You will need any installation of Windows DVD for this. I used Windows 7 DVD.

  1. first activate the legacy from BIOS support. (Press F10 to enter the BIOS settings)

  2. Insert the Windows installation DVD, and then press F9 to change startup options. Boot from the CD/DVD drive.

  3. once the loads of installation, select the "Repair Windows" option, located at the lower left corner.

  4. find the command prompt and run these commands:

  DISKPART

  LIST DISK

  SELECT DISK 0

  CLEAN

  CONVERT A GPT

  OUTPUT

  5 reset. Disable the legacy from BIOS support. Now the recovery system will work without any problem.

• Ethernet doesn't work is not on the new laptop of Win8.

  Just bought a new laptop to run a FullSpectrum LAser cutting machine. I was running the laser with my 4gig RAM Dell Latitude E5400. It worked perfectly. Connected to the internet with my rounter wireless home and connected to the laser with short Ethernet cable. I needed one more big computer RAM won the Dell Inspiron 15 of WIn8. Redownloaded the pilot controller/Laser but the computer cannot connect to the laser. When I ping IP laser, the laptop can not see. In the section networking and sharing/change the adapter settings, ther is a big red X next to the Ethernet icon. Help, please!

  Hi Ruth. Thanks for the help. I had the problem solved. In this case, if I disable the Wifi connection to the Internet, my computer connects to my laser properly cutting machine via the Ethernet port perfectly. I can then turn on wifi and the laser and the internet connection are functioning properly. Thanks again for the help online

  Gerry

• Webcam doesn't work is not in the new laptop

  Hello you can someone plz help me.i got a new laptop but the webcam is work.am new to computers a need all the help I can get thanks

  Hello loklan,

  1. what exactly happens when you try to use the Webcam, you get an error?

  2. have you checked if the drivers and the software is installed for your webcam?

  Ideally, you should be able to launch the webcam using the program that is installed on the computer of the Original Equipment Manufacturer (OEM).

  If you are having problems opening the Webcam with instant messaging clients, see below section which will give you information on fixing this problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Bluetooth doesn't work is not on the new XPS 13 9350, Windows 10

  Just cannot get Bluetooth to work with any device, even if these devices work with each other.   She will see the device in the Bluetooth settings page and will get "associated with" and then "Connected" for about 5 seconds and then fall back to "paired."  Never really gets a usable connection.    Everything works well on this laptop.  I downloaded a couple of drivers from the Dell site but don't know where to go from here.  Any help would be appreciated.

  Here is how I solved this on my Dell XPS 13 9350

  1 removed my device manager bluetooth accessory (in my case it was a headset/earphone)

  2. right-click on the "Bluetooth Dell Wireless 1820 A 4.1 THE" adapter and click Update driver software.  For me, it downloaded and installed an updated (took a few minutes)

  3 reset

  4. This is probably the key bit (gleaned in a post I found on a forum of HP for a similar symptom).  GO INTO THE BIOS AND RESET BIOS TO FACTORY SETTINGS

  Without step 4, no matching rate, uninstall, etc seems to have no effect.  I guess this is because the different versions of the bluetooth driver write different/incompatible bluetooth keys in the key store, and I suppose that the reset of the bios that erases the.

  Once again I re-paired everything then worked... CLOSE.  for my helmet in particular, I also need to do this:

  5. go in Control Panel "devices and printers".  Right-click on the bluetooth accessory and select Properties.

  6. click on Services.  It takes a few seconds to refresh

  7. you should see a bunch of boxes.  For me, they were all uncontrolled!  In order to check their to activate these services (for example "Audio Sink" to get audio routed to devices 'Remote Control' to manage accessory buttons, "Hands-free telephony", to manage the micro call / voice, etc.)

  Finally (!)  I could then do a right-click on my Audio properties, go to playback devices and select my bluetooth headset (and change to the default playback device, etc.)

• Audio doesn't work is not on the new Dell laptop

  I just bought a Dell inspiron with windows 8.1 5558 today. The laptop looks good, but I am facing 2 major problems.

  (1) a small cross in front of audio symbol indicating this as no output device is installed. Then the Control Panel indicates that NVIDIA Virtual Audio Device (Extensible wave) WDM is installed. So, how can I get the audio to work?

  (2) I see there is an upgrade available for the NVIDIA software too, but when I click it it keeps saying cant connect to NVIDIA, try again later.

  PS: The system came with a free upgrade option for Windows 10, would upgrading help? If so, please help with this.

  Thanks in advance!

  AYUSH

  http://www.Dell.com/support/article/us/en/19/SLN148687/en you have purchased from a seller who didn't know what he was doing

• HP Pavilion: Touchscreen doesn't work is not in the browser

  My touch screen stopped working specifically in Chrome.  It seems to work everywhere else, including IE.  It's probably a frame in Chrome or something on the computer settings I managed to accidentally change?  Thank you!

  Hi there @jexylou,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, HP experts and other support staff. I understand that you have a problem with the chrome browser works only not with the touch screen. I'll be happy to help you.

  Open chrome

  Put this in the address bar: chrome://flags/#touch-events

  Change the setting "enable Touch events" "Automatic" to "Enable"

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• USB doesn't work is not on the external hard drive

  I have Vista Ultimate and here I noticed recently USB not working only not on the external hard drive. I tried to update the drivers and the system responds with the most recent driver already installed. Verified the USB ROOT property and shows nothing when it comes to th Ext. HD but it sees the usb hub and head phones. An organization can help its driving me crazy!

  Hi Chaser07,

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you try to use an external hard drive on another USB plug and check if it works.

  Method 2:

  Automatically diagnose and repair problems with the devices when the Device Manager does not detect your hardware, audio, USB, or other devices, or when your devices are disabled or does not.

  Click run now in the link below to diagnose and fix problems automatically.

  Hardware devices not detected or does not

  http://support.Microsoft.com/GP/hardware_device_problems

  Check whether the problem is resolved.

  Method 3:

  Click on the link below to run Fix it which will help you to solve the problem.

  Tips for solving problems of USB devices

  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx

  Check whether the problem is resolved.

  Method 4:

  Click on the link below and install the update.

  Rollup cumulative update for USB in Windows Vista Basic components

  http://support.Microsoft.com/kb/941600

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Touchscreen doesn't work is not for the Satellite U920t - 10 p

  Please read this completely before you answer with your copied and pasted answers.

  My touch screen lets you stop work, but was still attached with a reboot of the machine.
  Now it doesn't work at all and * I've tried everything posted elsewhere in this forum *.

  I tried to change the settings for battery power, try to update the drivers (not exactly who is right though!).

  Please can anyone help because it is a new machine and it's very frustrating.

  Serial number: 7D054633H
  Model: Toshiba Satellite U920t - PSUL1E-01900JEN 10 p

  Thanks in advance.

  > Please read this completely before you answer with your copied and pasted answers.
  IMHO, I n t think that someone here in the forum doesn t read the messages before playback
  I hope that this part of your post is just the result of frustration due to the malfunction of the notebook...

  Back to your question:
  > I tried everything already posted elsewhere in this forum.
  and what does this mean? What have you tried exactly?
  Have you given zero and plant control panel?

  If not try and in the case where this help not the laptop's hardware could be affected which requires new checks of material by an authorized

• IPhone 6s off right speaker doesn't work is not on the helmet

  IPhone 6s off right speaker doesn't work don't not on the helmet, tried 3 different sets of headphones, have tried to clean shooting, reloading the OS etc., checked the slider etc, still no joy, any suggestions very welcome. It works on both speakers if I don't push the CAP fully home (but he then falls easily).

  Are you sure that you're pushing all the way?  If you are, this looks like a connector damaged in the phone. As a 6 s that it is still under warranty, then take it to an Apple store.

• sort order doesn't work is not in the library module

  Hi, I shoot events with 2 different cameras, using a pool to the other and back dozens of times switching.  When I come home, I import the maps of two cameras in Lightroom. In the library module, the small previews on the bottom sort by chronological order of capture OF the CAMERA.  meaning that it shows all the photos sorted by capture of the camera one time and then all the photos, sorted by the time form camera capture 2.  I have many, many would prefer if the form of photos, both sorted cameras sort by ABSOLUTE capture time, not a single camera, then another.  In the library module, select view/sort/capture time but it just doesn't work.  any help?

  Thank you

  Triple - make sure that the camera clocks have been set at the same period.

  The best way to do that is to display the date of capture under the thumbnails mode grid library. In the library, view > Display Options and set the low label or the top of the Compact cell Extras to capture Date/time. Then set View > grid view Style > Compact cells.

  Then view > sort > time capture. Look closely at the date/time under thumbnails and pay attention to the AM/PM (if you are in a country with 12-hour formats).  The date/time by strictly ascending order?

  If they are not strictly ascending, thanks for posting a screenshot of high resolution of your entire window of LR showing the problem.

• Find the base of Object.vi doesn't work is not in the picture 3D Solidworks Import control

  Hello

  I try to import the Solidworks model, I get the whole Assembly in 3D image image but when I try to find the particular help object to find object.vi It gives me

  Error 1 ganglion invoke in NI_3D photo Control.lvlib:Find Object.vi-> VRMLviewer.vi

  
  

  Possible reasons:
  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  Is there a specific way to be part of Solidworks or wjat could be the possible reason.

  Thanks in advance.

  Although you probably have names on your model, your VRML (.wrl) file does not work. If you try to open the file with a text editor, you can fix this by adding the following statement before processing:

  Basis of DEF transform {}

  This will allow you to access the location of the VI to find. The error is because LabVIEW has not found the name in your VRML.

• Divide the keyboard doesn't work is not on the Horizon

  Hi there: just received yesterday an Ideacentre Horizon (27 inches). I am wanting to use the virtual keyboard in shared mode, however there is no split option appear. I see two keyboards, as well as the opinion of handwriting, but not the keyboard split option. How can I make this work?

  The Horizon is propped upward, in landscape mode.

  Thank you!

  OK, what operating system are you using, win 8 or 8.1?

  In the bar of charms > settings > keyboard, you use ENG English (United States) US keyboard?

  Here's a video of MS on 'how to use the touchpad.

  http://Windows.Microsoft.com/en-us/Windows-8/using-touch-keyboard

  If you do not use the keyboard ENG (US), see "how to add a keyboard configuration '.

  http://Windows.Microsoft.com/en-us/Windows-8/change-keyboard-layout

  See you soon

  DragonRider