NETWORK adapter does not work after upgrade

Similar Questions

• Network adapter does not work after upgrade to Windows Vista Black edition

  Help, please

  I use to have windows vista and now I upgrade to windows vista Black edition.__i guess my network adaptar said corrupted__it network adaptar must be reinstalled .__i don't know where should I reinstall the driver__

  Microsoft does NOT Support Vista Black Editions.

  You will need to request support for Vista Black Edition where you have obtained/downloaded from.

  See you soon.

  Mick Murphy - Microsoft partner

• VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

  Hello

  I upgraded the PC host, but also virtual machines to Windows Pro 10.

  TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

  Is this a known issue?

  Thank you!

  Kind regards

  Joe

  SOLVED!

  
  

  I uninstalled VMware Player, including the abolition of the configuration files.

  
  

  re-installed VMware Player and it worked!

• Satellite L750D - network controller does not work after upgrade 64-bit

  L750D psk36a - 038008

  Thought I'd start with my full model number then the problem

  * before the upgrade everything worked well.

  Well I just upgraded my windows 7 32-bit to 64-bit to take advantage of the 8 GB of ram.
  Everything went well, I downloaded and installed all the drivers support > downloads section for my laptop in the 64-bit section.

  It seems I have a problem with the Bluetooth and network controller.
  The controller of the network in Device Manager says no driver not found or installed, I tried to uninstall and reinstall the device as well as redownloading drivers and reinstall, but no luck so far.

  Driver departures Bluetooth installation becomes subject to halfway and crashes, saying Bluetooth is not on, I tried fn + f8 to power on but no luck, I did the same as for the network card, uninstall, do reinstall, fresh driver, no change. In Device Manager it shows RFBUS with no driver found or installed.

  Any help would be appreciated.
  Sorry for the massive post...

  On a side note, I had a fresh win7 32-bit installed yesterday evening to see if I could get it working again but same problem.

  Hello

  According to the specifications of the laptop this piece of hardware was shipped with the 32-bit versions and 64-bit Win7 then why you do not install the original recovery 64-bit image?
  I presume you didn't create recovery media, right?

  When you open the Manager, devices and network adapters is LAN or WLAN installed correctly?
  What's missing?

  On BT, you're right. Impossible to install software to peripheral BT BT is not enabled correctly.
  What is with FN + F8? When you use it you see BT option there?

  Please note: If your notebook is WLAN switch, it must be turned on (the WLAN led should be lit) and only then you can use the FN + F8 key combination to activate the BT module.

• S3-391 Acer wireless network adapter does not work after driver update

  Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site.  After updating the driver, I can no longer connect to my wifi at home.  When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol.  I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck.  When I try to manually configure a wireless connection, I get message "an unexpected error has occurred."  I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses.  Any help would be greatly appreciated, thank you.

  And while playing, I managed to fall on a solution.  When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon