Network Bridge works is not on the new physical machine

Similar Questions

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• Access to the network bridge works do not (Linux host & comments)

  I am running VMware Player 3.0.1 on Fedora Core 10. (I know this is not one of the host of the OS supported; could this be the problem?)

  I built a virtual machine with a virtual adapter connected by a bridge and am under Fedora Core 10 also in the virtual machine. The virtual machine does not have any network access.

  I followed all the advice of troubleshooting to the Knowledge Base article 1008367 (at http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1008367 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 77717080 & stateId = 0% 200% 2077715760) does not.

  On the Linux host, vmnet-bridge is running.

  / dev/vmnet0, / dev/vmnet1 and/dev/vmnet8 all exist.

  However, the Configuration GUI network (under GNOME) lists vmnet1 material devices, vmnet8, eth0 (it's my actual physical network interface), and the so-called pan0.

  On the virtual machine, I think I have configured the network correctly.

  ping an address on my LAN IP said "the network is inaccessible." (The same ping succeeds on the host).

  Clues to understand why the network access doesn't work?

  Ok

  Start by checking that the Fedora 10 vNIC is connected on the audit: VM configuration-> network adapter Bridge-> Connect at power on (must be verified).

  So when the guest of Fedora 10 begins the vNIC should be upward.

  If the eth0 is not upward, you should be able to install and configure then. You can search on the net how to set up the network on a host of Fedora 10. I recommend that you use just the console text to do so.

  Don't forget to configure fedora network depending on the configuration of your LAN (static or dhcp).

  Let me know if it works or not

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Satellite Pro A10 - some keys not working only not with the new keyboard

  Hi all

  I hope some1 can help with this

  I have a Satellite Pro A10. The prob I have is a.b.n.and enter keys do not work and this is a new keyboard
  I hooked my other A10 and all keys work so the keyboard is fine.

  Everything works fine with the usb keyboard. Mother board everything seems ok.
  Any help please

  Chris...

  Post edited by: widgy

  Hello

  Why do you think the motherboard is ok?
  Maybe it s a controller keyboard problem
  Did you check if the cable is correctly connected?

  In my opinion if you are sure that the keyboard is ok 100% the problem to be attached to the motherboard because there is no other party that is placed between the keyboard and the mobo.

  Good bye

• Seagate external drive works is not on the new Macbook

  I have a Seagate external drive where I save copies of my pictures and videos from my Macbook Pro.  I just bought a new Macbook Air and Air reads the disc, but cannot be copied to it, it just says: it is read-only.  I'm confused, as I only used it on a Macbook so I know that it is formatted for Mac, plus I can still save using my Macbook Pro so I don't know why it won't work on my new Air.

  Any ideas? I would like to be able to continue the copy on this disc.  I back up my computers online so am not at the risk of losing data, just want to continue with my current system.

  Thank you all!

  You have a new drive to NTFS. You will have to repartition and reformat the disk in the order to the EU.

  Drive partition and format

  1. open utility disk from the Applications\utilitaires folder.

  2. after disk utility charges select the external hard drive (this is the entrance Out-bumpy with of the mfgr.) ID and size) in the list on the left. Click on the button/tab Partition in the disk window/toolbar utility main.

  3. in the title of the Volume entitled plan set the number of partitions in the menu drop-down one. Click the Options button, set the GUID partition scheme, and then click the OK button. Set the type of Mac OS extended (journaled) format. Click on the Apply/Erase button and wait until the process is complete.

  4. Select the volume you just created (it's the subentries under the entry for the road) in the list on the left. Click on the Erase tab in the main window of disk utility.

  5. set the type of format Mac OS extended (journaled). Click on the Security button, look for the button zero data and click OK to return to the window to erase it.

  6. click on the delete button. The formatting process can take up to several hours depending on the size of the disk.

  Steps 4 through 6 are optional, but should be used on a player that has never been formatted before, if the format type is not Mac OS extended, if the partition scheme has been changed, or if another (not OS X) operating system has been installed on the disk.

  The steps above may differ slightly depending on the version of OS X and disk utility.

• Clone Stamp tool works is not on the new layer

  I created a new layer and tried the on this new layer Clone Stamp tool to us, but it won't work. It will work on the background layer, but not the new layer, that I created. Please help, it drives me crazy. I use the last photoshop.

  Looks like you beat me, Chuck!

  Mine works fine on current and below.

  

  Try a reset of the tool:

  

  If this fails, try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Mac: Hold down Cmd + Opt + shift and run Photoshop. A box will appear, asking you if you want to continue with the reset, select 'yes '.

  Benjamin

• Netflix doesn't work is not on the new Vaio

  I just bought a brand new Sony Vaio yesterday and have been set up all my preferences and apps, but so far the only one to give me troulbe was Netflix. Any time I try to start playback, I get an error message saying that I have not installed the latest version of the graphical software for the computer and run Windows Update. I ran the update once last night and am still getting the error code today. Someone knows how to fix this?

  Hello Nicolas,.

  Have you already updated the Windows Update?

  What is the model # of the computer?

  http://eSupport.Sony.com/us/p/support-info.pl?info_id=264#notebook

  Reinstall the video driver and updates. Enter the model # here:

  http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

  If the problem persists, contact the support of Netflix team.

  Please indicate the solution as accepted, if you find this information useful.

• Design the Standard CS6 Suite doesn't work is not on the new iMac

  I just bought the new iMac 27 ". Good looking! I've updated the OS 10.8.2 I ran that Installer DSStandard CS6 and whatever else it took place without a hitch. When I try to start anything but Acrobat, before unexpectedly programs I have not even the boot screen. I have repaired permissions.

  Any suggestions as to what I'm doing wrong?

  Yes, this occurs when users try to copy it to the applications using Time Machine or the Migration Wizard.

  Please remove the software using the uninstaller programs located in Applications/Utilities/Adobe Installers.  After that it's over, you want to follow up with enforcement of the CS cleanup tool.  You can find the details of its use in the cleaning of CS for Setup issues tool | CCM, CS6, CS5.5, CS5, CS4, CS3 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.

  Once you have completely removed software, then please reinstall from your installation media.  If you have further difficulties then please format the drive and only restore your documents and settings.  You will have more success to install with a clean drive.

• RS232 not working only not on the new computer?

  I had a program running on RS232 to control some pumps on a different computer, however when I run it on the new computer I get no communication with my camera. It's the same setup, same configuration and everything. Nothing has changed in the program except the computer to which it is connected. Any thoughts on what is happening? I can control the camera perfectly through orders ASCII of the hyperterminal program in windows xp but Labview has no effect on the pump.

  
  

• Could not start the new virtual machine or VM remove a data store

  Hi guys,.

  I'm not new with ESXi, but my knowledge with vCenter and Clustering must be improved, so here's my problem.

  We have a Cluster of 2 ESXi 4.1 hosts on a San with 2 VMFS.

  My first problem is when I created a new virtual machine and try to start it, I got an error message similar to the one included with this post.

  My Second problem is more picky. Since I am unable to start my new virtual machine, I had removed from drive and I had created a new. But when I took a peek in the data store where was deleted VM, the directory with all the files are still there. When I try to delete it, I got an error message telling me that it is impossible to proceed.

  Q please?

  Best regards

  Stéphane

  82% of failure can be other issues.  The article below

  http://KB.VMware.com/kb/1006052

  Also, I saw, where bad records DB for your ESXi hosts can cause weird problems as well.  The host with the problematic guest, can you do a right click on it and "disconnect"?  Try to get out of the bunch at the data center level.  If you get an error vCenter, that means return folder DB.  From there, while the host is in a disconnected state, remove the host to vCenter, then "add host". This will update the DB record.  Maybe worth it?

• Ethernet doesn't work is not on the new laptop of Win8.

  Just bought a new laptop to run a FullSpectrum LAser cutting machine. I was running the laser with my 4gig RAM Dell Latitude E5400. It worked perfectly. Connected to the internet with my rounter wireless home and connected to the laser with short Ethernet cable. I needed one more big computer RAM won the Dell Inspiron 15 of WIn8. Redownloaded the pilot controller/Laser but the computer cannot connect to the laser. When I ping IP laser, the laptop can not see. In the section networking and sharing/change the adapter settings, ther is a big red X next to the Ethernet icon. Help, please!

  Hi Ruth. Thanks for the help. I had the problem solved. In this case, if I disable the Wifi connection to the Internet, my computer connects to my laser properly cutting machine via the Ethernet port perfectly. I can then turn on wifi and the laser and the internet connection are functioning properly. Thanks again for the help online

  Gerry

• Pavilion g6 2301AX: System Restore doesn't work is not on the new HARD drive

  My factory installed HGST HDD is not short DST check, so I bought new internal HDD of WD5000LPCX. I did the recovery DVD windows 8 long ago and tested several times.

  The problem, I do face is, after I ran the system recovery (insert all 5 DVD then restarts Recovery Manager), I get the error "No found bootable media" when the legacy support is disbled. On activation of legacy support, begins the phase of installation of driver, but after a while, my laptop is stuck in a reboot loop. I left it for half an hour but he kept just reboot.

  Guarantee of the laptop is long gone. New installation of Windows 7 has worked well, showing everything goes well with the material, but I want my Windows 8. Help.

  He resolved myself: had to convert the GPT MBR partitioning system.

  As this community seems inactive, I'll post like how to convert to GPT:

  NOTE: You will need any installation of Windows DVD for this. I used Windows 7 DVD.

  1. first activate the legacy from BIOS support. (Press F10 to enter the BIOS settings)

  2. Insert the Windows installation DVD, and then press F9 to change startup options. Boot from the CD/DVD drive.

  3. once the loads of installation, select the "Repair Windows" option, located at the lower left corner.

  4. find the command prompt and run these commands:

  DISKPART

  LIST DISK

  SELECT DISK 0

  CLEAN

  CONVERT A GPT

  OUTPUT

  5 reset. Disable the legacy from BIOS support. Now the recovery system will work without any problem.

• 42 bit Analyzer works only not on the new computer

  I have a scanner that worked fine on my old computer. It will not work with my new, any answer please?

  Make sure the scanner is compatible with the version of Windows that is on your new computer. Check the scanner manufacturer's Web site for this information. You should also check here for the latest drivers for the version of Windows on your new computer, it and download and install the latest drivers from there (assuming they exist).

• touch screen works is not on the new Toshiba Satellite S75-A7221

  The touch screen on my brand new Toshiba laptop with Windows 8 never worked.  Checked the Manager of devices (and why are the 3 names of Interface devices devices?) not named so that we can identify what they drive for the current versions even if it's new, and all show as being updated and active.

  The touch screen on my brand new Toshiba laptop with Windows 8 never worked.  Checked the Manager of devices (and why are the 3 names of Interface devices devices?) not named so that we can identify what they drive for the current versions even if it's new, and all show as being updated and active.

  Contact Toshiba.  If this system has been sold to you as a complete and functional - system it should work from the beginning.

• Webcam doesn't work is not in the new laptop

  Hello you can someone plz help me.i got a new laptop but the webcam is work.am new to computers a need all the help I can get thanks

  Hello loklan,

  1. what exactly happens when you try to use the Webcam, you get an error?

  2. have you checked if the drivers and the software is installed for your webcam?

  Ideally, you should be able to launch the webcam using the program that is installed on the computer of the Original Equipment Manufacturer (OEM).

  If you are having problems opening the Webcam with instant messaging clients, see below section which will give you information on fixing this problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/seeing-is-believing-use-a-webcam-to-bring-your-Instant-Messaging-to-life

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.