Access to the network bridge works do not (Linux host & comments)

Similar Questions

• access to the network drive on XP vm & Mac host

  I'm under vmware 2.0.5 and XP SP3 via bootcamp on OSX 10.5.8. If I map a network drive in a virtual machine XP, I can access is no longer the Mac host.  If I map the drive but share the network as a record disk using vmtools, I can access it from the Mac and XP vm.  Is this a normal behavior?  I would have thought the right way to proceed would be to treat all people as a 'computer' apolitical and connect directly to any external network resource rather than sharing an external resource via the host mac.  I also noticed that my score bootcap 'disappears' from my Mac when vmware is running... It's just for protection?

  Thank you

  Bruce

  Mapped network drives can be mounted to 1 place at one time, then Yes, what you're feeling is normal behavior.

  What type of network you are using?  NFS? SMB? AFP?

  When you use shared folders, we pass everything through a 'passive' network share to work around this problem (among other reasons), allowing you to access the folder of the host and theguest.

  The boot camp partition dismantles the workstation for the same reason... some things can not be mounted at 2 places at the same time.

• Network Bridge works is not on the new physical machine

  I move a picture of centos comments of an old machine, host of win 7 to a new. Setting in network networking worked fine with this image on the old machine, but I can't make it work on the new. NAT network works fine on the new, but I need to use bridged. For some reason the image cannot access the DNS server (can not ping it) on the new host. I have disabled the firewall on the new host.

  Disable the automatic bypass and bridge directly to the host's physical network card in the virtual network Editor.

• The network bridge does not connect after resume the S3, Windows 7 x 64 & x 86.

  I installed a network bridge between my wireless network card and a local LAN port on my motherboard, I have my xbox connected to the LAN port and the wireless card has the connection to the internet.  Everything works as expected and I have full access to the internet on PC and xbox.  Issues occurs when I upgraded my PC to sleep and then wake the system, wireless connection works as expected and can see my router but the network bridge not be re - not connecting, I have to disable the bridge then turn it back on until it will work...
  The same Vista configuration worked without problem.

  I'm having the same problem as you, I'm trying to use my laptop to connect my Xbox 360 to my wireless network. It works very well, I have to disable and then re-enable the Miniport MAC bridge or a connection to the Local network after every sleep sleep before that it will work again.

  I noticed that I can not ping even the Xbox until one of these actions is carried out, I don't think that it is actually a problem with the network bridge, but with the ethernet connection (Marvell Yukon 88E8038 PCI-E Fast Ethernet Controller for me). I agree I think that it is an OS problem because I also do not experience the problem with ICS but then cannot be a State of NAT open for the 360.

  An obvious solution is a script that you can run to disable and re-enable the connection to the Local network, someone there at least an easy way to do this?

  EDIT: actually I think I just solved the problem by doing exactly the opposite of what I saw as the solution proposed several other places.

  1. open Device Manager

  2. Select the network adapters, find your ethernet card, do a right click on it and go to properties

  3. click on the power management tab.

  4. make sure that the "allow the computer to turn off this device to save power" box IS COCHEE

  5. apply the settings, and then click OK.

  FACT

  I hope this helps you.

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• the network bridge is not a valid ip configuration

  the network bridge is not a valid ip address configuration, how can I solve this problem? Help, please! Thank you

  Hi Chris,

  1. how many computers is connected to the network?

  2. how the computers are connected (wired or wireless)?

  3. do you get this error message on all of the computers on the network?

  4. have you tried to reinstall or update the network drivers?

  You can try and run the network troubleshooter utility,

  Open utility troubleshooting of networks:

  http://Windows.Microsoft.com/en-in/Windows7/open-networking-troubleshooters

  Reference:

  Create a network bridge:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

• The network bridge does not

  I tried to create a network bridge between my LAN and wireless adapter, but my laptop ran out of battery halfway through. Now when I go to the properties of my wireless card it says that it is part of a network bridge. The problem is that the network bridge does not appear in the network sharing Center or when I run the map to see the command-line netsh bridge. I'm stuck now, unable to create a bridge or remove the ghost there wireless adapter seems to think it is. I have no restore point system to return to and am so stumped for ideas. Any help would be great.

  I have a Lenovo Z500 and had tried the troubleshooting that came with nothing.

  I was going to try reinstalling the driver, but before that I did decided to install the upgrade to Windows 8. 1. This seems to have fixed and I was able to create a network bridge that appears.

  Thanks for the help and the quick response

• vSwitch ESXi 5.1 workaround to virtual machines (direct access to the network)

  Hello world!

  I have a server running properly the 5.1 ESXi hypervisor and got inside the physical grid active router with DHCP. How can I configure the vSwitch on ESXi 5.1 work not managed on the network, without VLAN and have direct access to the network?

  Just to clarify, I would like to first of all virtual machines VMware Workstation works - if it is possible to run several virtual machines and define all NICS (Network Interface Card) as connected by a bridge, that is to say. Each VM gets the specific configurations of IP to the external router.

  Since now, thank you very much for the help!

  Best regards

  Eduardo

  With ESXi the vSwitches work comparable to Bridged networking, so there is really nothing special to do.

  André

• From Firefox blocks all access to the network

  When I start Firefox (41.0.1), all access to the network is completely blocked. Before you start the FF, I can access the Internet (with Chrome or IE), other computers, but as soon as I launch Firefox, all access to the network (including the connection to other computers) is blocked. In addition, my computer will turn off more.

  As far as I KNOW, I have not installed lately extensions or add-ins.

  Thank you for your resolution. Today, when I mentioned to work, I was told to update Firefox. This seems to do the trick (so far, fingers crossed!).

  (https://support.mozilla.org/en-US/kb/refresh-firefox-reset-add-ons-and-settings) so very probably an extension is causing harm.

  When this isn't ' t the resolution, I will surely return to your resolutions.

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• The network bridge.

  I am trying to remove the bridge on my network, but it is always with the same error: an unexpected error occurred while configuring the network bridge. and when I try and fill the connections with a new bridge, it comes up with this: to create a network bridge, you must select at least two network connections local or Internet at high speed that are not being used by Internet connection sharing.  so I really need help on this. I want a little play xbox live again very soon...

  trapanrot,
  Give us a little more information on exactly what it is you are trying to do.  Your first sentence said that you try to remove the network bridge, but then later in your post, it seems you are trying to create a network bridge.  You try to remove an old bridge and create a new and if so, why - some hardware has changed in your system?  You said you want to play xbox live again, you try to create a bridge to connect to your xbox and if so he worked before?  A little more information about your computer type, network devices and how it is configured all help us to help you solve this problem.

  When you run the Test Xbox LIVE connection, tests network status displays "Failed" (NXE)
  http://support.Microsoft.com/kb/958432

  Let us know this information about your system and network so that we can better help you.
  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LATITUDE DE820 wiped out loaded XP drivers DELL & SW, no access to the network

  Everyone out there - I need HELP... I bought a second hand LATITUDE DE820 with Windows 7 above and it worked fine (also WIFI). I need to load XP Prof on it (Yes...) and therefore all DELL SW disappeared (had no CD DELL) that I loaded package XP 3 Service that I plugged in Ethernet, but I also have a WLAN - but NO communication to all NETWORKS. Ping an IP address any LAN brings 'Host unreachable' IPConfig/all shows: IP of Windows host Setup...: laptop Prim. DNS: Enter Mode: Broadcast IP routing enabled: No. WINS Proxy enabled: Ethernet adapter without Bluetooth network connection: media state: media disconnected Description: peripheral physical addr Bluetooth (Personal Area Network): Mac addr. Control Panel-> network connections displays LAN at the Connecticut 1394 network adapter (properties: peripheral works properly, driver: MS 07/01/2001!) Connection status: connected but 0 packet protocols: f. Client Microsoft NW File & Printer sharing TCP - IP - trying to hit the repair-> msg "TCP/IP not enabled for this connection") Conclusion: I think that my XP drivers are too old, or not DELL problem: I have no access to the network - minimum need drivers update for access to Internet, and then upgrade to download that/those pilot on a Non-Dell PC then CD, then install on the laptop don't know DELL HW, used Service tag to find 11 drivers, drivers resp. 75 for that I think it's a driver of 'network' - but don't know what or any other suggestion? Thks for any help Peter

  Well well maybe it was because I realized that I needed to insert HTML
  to get my text with line breaks.
  But in any case the problem is solved by support group European German DELL who responded very quickly by there DELL Forum and help me great to go again. Thank you DELL-Dave S.
  Problem solved by:
  followind drivers downloaded from the CD, and then installed on D820
  WLAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=R257701&OSCODE=WW1&FILEID=2731111614&LANGUAGECODE=DE&CATEGORYID=NI.
  LAN: HTTP://WWW.DELL.COM/SUPPORT/DRIVERS/DE/DE/DEBSDT1/DRIVERDETAILS/PRODUCT/LATITUDE-D820?DRIVERID=04VK6&OSCODE=WW1&FILEID=2731090506&LANGUAGECODE=DE&CATEGORYID=NI.
  Now using Ethernet and wireless network worked with access to the network, all the others downloaded drivers from the net.
  Viva

• Restrict access to the network on 871 router via mac address

  Hello

  I have a Cisco 871 router and I am trying to allow only specific MAC addresses access to the network. Is there a way to specify that only specific MAC addresses are allowed to access? Any other MAC access will be denied?

  I can either have static IP or DHCP for local machines.

  Can I use this "secure DHCP IP address assignment" details found here... http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/ftdsiaa.html ?

  I use these...

  static Mac address table

  OR

  Security table of Mac addresses

  ... to achieve this?

  Thank you.

  You can use "mac-address-table static" If you know all the mac addresses that will be connected.

  If the router is by distributing ip addresses so you can indeed do secure IP DHCP address assignment.

  Note that you can make a 'mac access-list' switch and aplly in any vlan you want.

  Alternatively, you can do "dhcp snooping" allowing guests who got a dhcp ip addresses and are not identity theft.

  I hope it helps.

  PK

• Access to the number of property may not set through a reference with static type...

  Hi all!

  I encounter this problem today... Take a look at the code:

  import com.trick7.effects.TeraFire;

  for (var j: uint = 0; j < 10; j ++) {}

  var fire: TeraFire = new TeraFire();

  Fire.x = j * 40 + 20;

  Fire.y = 100;

  Fire.Number = j; This line is causeing the problem

  addChild (fire);

  fire.buttonMode = true;

  }

  Class TeraFire creates fire particles. Compiler error is:

  Scene 1, Layer 'layer 1', frame 1, line 7.

  1119: access of the number of property may not set through a reference with static type com.trick7.effects:TeraFire.

  Can someone help me find a solution to this problem.

  I can do this 'number' with a clip, but not in this case. What can I do?

  Sorry oops misspelling... I meant fire ['number'] = j;

  The class must also be dynamic for this work, i.e.:

  public dynamic class TeraFire extends MovieClip
  

  (a dynamic class extension is not the class dynamic sub...)

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• I am connected but the network properties window does not show the size of the packets to all the

  I am connected but the network properties window does not show the size of the packets to all the

  Hi asaimas,

  You can follow this link & check if it helps:

  Configure the Option of configuring server network packet size

  Hope the helps of information.