Network connection diagnostic utility?

Similar Questions

• Clock set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system ARDAgent.app has been changed and cannot be repaired by disk utility. Files repaired permissions

  As soon as that connected with the password, the clock is set to date before January 1, 2001. Pop - ups require to accept incoming network connections for: krb5kdc, cups-lpd, MDNSResponder, configd. File system 'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  Am also using Firefox 43.0.3 browser like Safari.

  'System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent' has been changed and cannot be repaired by disk utility. Files permissions were repaired by disk on the install disc utility. How can I stop this?

  You can ignore the above.

  Utility disk - permission errors, you can ignore

  System preferences/Date & Time/Date & time - is it set to automatically set the date and time?

• Print Diagnostic Utility

  Hi all

  I recently bought an of Officejet Pro L7380 which is connected to my PC via the USB port.

  I have a problem intermittent but frequent where the print job is stuck in the print queue and do not print unless I restart the Officejet. It is very annoying for the Officejet takes forever to initialize.

  I found a solution for this problem on the HP site and the first recommended step is to download and install the Print Diagnostic Utility.

  However, I'm unable to do what the download link is dead.

  Download the utility anywhere else?

  All responses are greatly appreciated.

  26/04/2012 update:

  HP Print Diagnostic Utility (aka "UDA") has been replaced by next generation HP, the HP print and Scan Doctordiagnostic tool.

  All the features previously available in the PDU and the utility HP Diagnostic network (aka 'NDU') has been combined with an easy to use, the new HP Print and Scan Doctor.

  Get the HP print and Scan Doctor here: www.hp.com/go/tools

  Do not forget to leave HP to know how it goes with the new print and Scan Doctor by taking the short survey you will receive when you have finished using the tool.

  Thanks, Kent G.

• TimeCapsule loses network connection

  I have a TimeCapsule (new version of turn 2014) and I noticed that my backups are not being every hour. Utility app showed 'device not found' on the network.  I restarted the time capsule - it connects to the network successfully for about 3 minutes and then "Device Not Found".  I restarted my TimeWarner cable modem then restarted TC even question.  My wifi router is the TimeWarner modem and I have 60MB of speed that I'm guaranteed up to 50MB, so all right from the internet side.

  I did a soft reset... same question.  I did a hard reset and used the previous settings - same issue (3 minutes network, and then click device not found a few moments later).  I guess I can do a default network but since absolutely no changes to the network settings have work probably months (7 + months) I don't see why this would happen.  I don't want to lose my entire backup (s) risk is... I have no other way to save my December 2015 MBP.  * Funny, it is the TC network shows, if I hit him "save now" finds TC but TC for 3 minutes then turns off network; However, the backup actually occurs successfully. But will not back up again until I restart then the TC on the network these 2-3 minutes before losing the connection.  Help.

  I have a MBP 15 mid-2015 "and capital El v10.11.6.  My TC etc are all up to date on the versions of software too!

  Many users have posted on the forum with the same number of "Device not found" in the last days. Looks like almost every new post is about it. This is one of a few minutes there are, for example:

  TimeCapsule loses network connection

  Rumor has it that the 10.11.6 recent update is part or all of the problem, according to the opinion.

  The "fix" of the day is to disable Back to My Mac in AirPort Utility, that seems to work for users who have helped with my Mac. Of course, you lose functionality when you do this.

  No solution yet for users who do not use Back to My Mac, because they cannot turn off something they did not.

  Apple is silent, not so much we can do until Apple recognizes that there is a problem (which they are not since yesterday when I spoke to them).

  Stay tuned.

• M30: Could not find a Local network connection

  Hi all, I really hope that someone can help me!
  I had a M30 Windows Home, it comes with a built-in wireless G connection (that's fine).

  However whenever I try to access my network via an ethernet cable, I can't find my LAN connection under--> network connections Control Panel.

  I have installed the last drive for the LAN (lan-sm30-xp - 56068112003.zip) available on the support site.

  I'm still not able to detect my NIC or discovered my connection to the local network.

  Any ideas?

  Thank you very much
  G

  Hello

  I agree with chance. Try to create a new connection to the local network. In addition, you can also try to run the network troubleshooter utility.

  Good luck

  Good bye

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• In the firewall, under the Advanced tab, have error that says: "the network connection settings have been corrupted. It is the last issue after problems with Windows Security Esstentials

  Essentials security Windows stop working and firewall has been disabled. Security Essentials showed a sirefe virus, I think. I was finally able to remove and reinstall security essentials and turn on the firewall. However, I have now several problems.

  Windows Update does not seem to work. It is said it is download and install the update, but the window keeps popping up saying I need to install the updates, and it's the same updates that have been installed just.

  Cannot run updates on financial software or other programs.

  Cannot run an automatic Microsoft patches to resolve firewall issues.

  Running Windows XP Media Center Edition, 2002, Service Pack 3

  A registry cleaner or any third party Cleanup utility was run on your system?

  You are in the habit of using "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare 5; Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; Advanced System Optimizer. TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. CCleaner,)?

  Moreover, these registry cleaner programs are snake oil.

  They don't help and can cause problems, so try to avoid them.

  When you open the firewall applet Windows (firewall.cpl) and click on the Advanced tab, the following error message may appear:

  Network connection settings have been corrupted. To resolve this problem, click default settings. This will remove all your Windows Firewall settings, and this might cause some programs to stop working.

  

  Resolution

  • Click Start, run. Type services.msc and press {ENTER}
  • Double-click Windows Management Instrumentation
  • Set the startup type to Automatic
  • Click Start to start the service.

  Then run these commands to start, run dialog box:

  WinMgmt/regserver
  regsvr32 "% Windir%\system32\netshell.dll".
  regsvr32 "% Windir%\System32\hnetcfg.dll".
  regsvr32 "% Windir%\system32\wbem\wbemprox.dll".
  regsvr32 "% Windir%\system32\wbem\wbemsvc.dll".
  regsvr32 "% Windir%\system32\wbem\wbemcore.dll".
  regsvr32 "% Windir%\system32\wbem\fastprox.dll".

  UTC/GMT is 18:39 Wednesday, June 20, 2012

• Cannot establish network connection. Messages on the icon alternate between "Acquiring network address" and "unplugged network cable.

  Original title: cannot establish a network connection

  Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?

  Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:

  Diagnosis of IP Configuration
  Invalid IP address
  Info	Zero (0.0.0.0) detected IP address
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: reset the network connection
  action	Disabling the network card
  action	Activation of the card network
  Info	Successfully activated network adapter
  Info	Zero (0.0.0.0) detected IP address
  action	Repair Manual: Reboot modem
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  Info	Redirect the user to support call

  WinSock status
  Info	All base service provider entries are present in the Winsock Catalog.
  Info	Winsock Service providers strings are valid.
  Info	Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
  Info	Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info	Entry provider RSVP UDP Service Provider managed the loopback communication test.
  Info	Entry provider RSVP TCP Service Provider passed the loopback communication test.
  Info	Connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter
  Network location detection
  Info		Using the Internet connection at home
  Identification of network adapter
  Info	Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
  Info

  Ethernet connection selected

  State of the network adapter

  Info

  The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn

  FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  warn

  FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  error

  Could not make an HTTP connection.

  error

  Could not make an HTTPS connection.

  error

  Could not make an FTP connection.

  I found the problem (s), even if I am always left with a few questions.

  During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.

  The solution:

  (1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.

  (2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.

• Wireless networks icon disappeared in network connections

  I ran a software malware recommended by my administrator (Verizon) internet agent after a long period of trouble connecting to the wireless router. After telling it to remove the files mentioned, I'll be back to see the wireless icon is missing under network connections in the Control Panel.No idea what happened to her. Now, I can not access the router somehow. What can I return this icon of wireless networks. ?

  I do not think that you do not forget the files that you have deleted or 'malware software' you used?

  I would like to start by uninstalling and reinstalling your wireless adapter.

  If you have an external wifi adapter, go to the manufacturer Web site and download the latest driver for it.

  If you have an internal wifi adaptor (probably in laptops), go to the computer manufacturer's website and download the latest driver for your wireless card.  Most computer manufacturers provide a link for the correct driver after you identify the specific model of your computer (in the case of Dell, use the "Service Tag").

  Save the driver a place that you will be able to find (on a USB flash drive if you have used another computer)

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the "Network adapters" category by clicking on the +.
  Right-click on the entry of your wireless adapter and choose uninstall.
  OK, go out of your way and restart.

  If the Add New Hardware Wizard does not open when Windows reboots and detects the device, go back to Device Manager, right click on the entry of the wifi adapter and select Update driver
  On the Hardware Update Wizard screen, don't let it connect to Windows Update, but select "Install from a list or specific location."
  Click 'Search for the best driver' and also 'include this location '.  Click on the "Browse" button and navigate to the folder where you saved the downloaded driver (unpacked already, if you downloaded in compressed form).  Make sure you select the subfolder WinXP (or a similar name).
  Click next and the adapter must install.

  Assuming that the above results in an icon for your adapter in network connections wireless, there is more to do.

  Right click on the network connections icon, then select Properties.

  Make sure that shows the 'General tab '.
  In the box under "this connection uses the following items", you should have 4 entries:
  Microsoft Networks client {needed}
  {Required} (TCP/IP) Internet Protocol
  Sharing files and printers for Microsoft Networks {necessary if you want to be able to share files and printers}
  {Optional, but usually present} QoS Packet Scheduler

  If these elements are not in the list, make sure, using the install and following dialogs.

  In the wireless network properties dialog boxes, click the tab 'wireless networks '.
  Make sure the box to "use Windows to configure my wireless" is checked unless you have the utility of the manufacturer do this work.
  OK your way out

• I am now unable to connect to the internet, it seems, that has most all of the icons in my folder/window "network connections."

  It seems that has most all of the icons in my folder/window "network connections." programs can be corrupted, how to restore these

  I have been using a wireless adapter & also I can't access the utility of windows for wireless connections either, the network, I used is not visible on my computer but my laptop can connect to it

  My OS is windows XP home

  Hello

  Not 'obsessed' all history essay for where the penalty is at the moment.

  Here's how, http://www.ezlan.net/wireless.html

• No Internet access, the 'Connect to the Local network' and 'Wireless network connection' are "Local only".

  I'm portable computer maintenance of the customer, a Toshiba Satellite L305-S5885, under Vista Home Premium x 86 SP2, with infections by malicious software and internet connection problems. I have managed to get rid of all of its 251 infections and I am now addressing the connectivity problem. I'm unable to achieve on its ethernet or a wireless connection to Internet. The two network status of connections 'Unidentified network', and also ' access: Local only ' all other machines hooked up to my router via CAT5e and some via 802.11 g/n, have excellent speeds with internet connectivity, so I know that the problem is limited to his machine. I tried the following:

  Deactivation and reactivation of these two connections: FAIL.

  "Diagnose and repair" on the two connections: FAIL.

  Under dynamic I.P. type to static/static to the dynamic: FAIL.

  Uninstalled all network via Device Manager devices, then restart: FAIL.

  Manually uninstalled all the drivers and utility and installed the latest versions: FAIL

  The command ipconfig/all text follows:

  ----------------------------------------------
  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Brooklyn's>ipconfig/all

  Windows IP configuration

  Name of the host...: Brooklyns-PC
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-31-87-95
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.174.235 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Description...: Realtek RTL8102E Family PCI - E Fast Ethern
  and NIC (NDIS 6.0)
  Physical address.... : 00-1E-33-4E-2E-F7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Autoconfiguration IPv4 address. . : 169.254.74.29 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {C41651CC-0B3D-411D-8187-745214 C 69}
  B4B}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {816357D 3-D 8-494C-AA09-F622AE861 44}
  0FA}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Brooklyn's >
  --------------------------------------------------

  Guys, I'm really hitting my head against the wall on this one, and I would be VERY happy for any help through this. Thank you!

  I thought about it, there was a corrupted installation of Norton 360, the origin of the problem. I've used the Norton removal tool and voila! Internet! Thank you.

• HP Officejet Pro 8100 does not print - wired network connection - Mac OS x 10.9

  I have my 8100 Officejet Pro connected to my home network via a wired ethernet connection. I use Mac OS X 10.9. We had ongoing problems with the printer is accessible via the network. Whenever we have set up the connection, it works for a few print jobs, but whenever we close the printer, the next attempt to print always fails.

  I just went through all steps to solve the problem. I went back to square one: reinstalled printer drivers on my MacBook Pro running Mac OS x 10.9; has passed through all stages of wired network connection. and now, every time I send a job to the printer, it fits like the receipt of employment and printing, but the printer itself does not.

  The Billboard on the printer indicates it is connected to the network. Print the Network Setup page confirms it is connected to the cable network. Visit the IP address of the printer via my web browser also confirmed. I am able to print a printer HP Print Utility status report, so I don't know that the computer network and the printer are connected and communicate with each other. However, I can't print from MS Word, PDF files or anywhere else outside of the HP Print utility. Work is revealed in the queue, where it shows the status of each page completely 100%, employment disappears, but does never print it.

  Help, please. This has been a problem since I bought the printer, and now that my warranty has expired, it's my last hope of fixing. I'm at the end of my tether with a device that I spent enough money on to expect to work, and it does not work properly literally since the day where it was purchased. All attempts to implement working temporarily, at best. Thanks in advance and if you need more information, please let me know.

  Hi DBG345

  I understand that you are now able to print from USB, but not on the network.

  There are a few things you can try.

  Connect the printer to the router with the ethernet cable.

  Unplug the USB cable.

  Get the IP address of the printer.

  Click on the Apple.
  Click on System Preferences, click on the print icon and scanning, select the printer, click the sign - to remove the printer. Then click on the + sign, then select the printer from the list, select the printer name first, if it does not try the driver airprint, (airprint is apple pre-installed with functionality of basic pilot) click on the Add button.

  You can try is to add the printer as a Protocol IP to see if it will work. Go to Apple, system, print, and scan preferences, click on + button, then select the icon of intellectual property across the top, type in the IP address of the printer, select direct stream below, then apply.

  Try to print.

  I would like to sign up for updates from the HP driver. When available, you will be informed by e-mail.

  Hope that helps.

• Cannot install a network - error message: this wizzard can not configure a network connection.

  Vista Business SP2 32 bit OS

  Impossible to set up a network connection using a wizzard.  Message: This wizzard cannot set up a network connection.

  A broadband connection was founded prviously.  There is no display of the network in 'connect to a network window.

  a new folder by name hiddenpbk appeared on the desktop and through which I can connect to the previously established connection.  but can not connect via "connect to a network window.  Neither I am able to set up a new connection using the wizzard.

  Please helpme.

  Hello

  Can you explain what connection to a network means in your case?

  What exactly you want to connect?

  If you have a valid broadband (Internet connection), you are already connected to a network.

  If you want to check your wireless system follows this process.

  If as a result of this process, you find something wrong, tell us what it is.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I can't get the wireless connection appears on the list__ of 'network connections '.

  Only, I had to reformat my Latitude D31 and don't know how to do the wireless network connection appears on the list of network connections.  The without line is turned on and the router works.

  On a relative (sort of) topic, before reformat, I got a blue screen that says since more memory was used that was installed, there was no memory for something else.  The computer is running (I reinstalled Windows XP, but in Setup the message still arrives.  Is this normal?

  Hello

  Old laptops use to come with very little memory.  Since then, software exceed the amount of memory installed

  Check the amount of memory you have and see if you can upgrade.

  You can find and expanded manual on Dell' support for the laptop.

  Regarding the wireless.

  It is possible that the wireless card is not operational and need to reinstall drivers.

  Maybe this can help.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  -Jack MVP-networking. EZLAN.NET