Network has 4 0r 6 public or local?

Similar Questions

• wireless network connection fails to connect to internet-local only connection

  too much time invested to leave now... Here is the configuration:

  HP dv2500 presario with home premium Vista 64, SP2... can connect to the internet via ethernet, wireless local = only... Network router is Netgear WNR3500L with 5 machines to sp3 of xp connected without problem.

  Been to the grinder on this one-darn google redirect everything began, had to shut down the network, reset the router, safe & bring systems up to one at a time running 3 to 6 programs of malware to clean each box...

  So I've updated driver, roll back driver, many forums, tried too many things with the same result... Performed system updates to restore, all - same result... Last step was MS support article that I followed step by step without resolution, so I hit the button... got support with regard to the identification number of the product, system would detect not, therefore entered manually & get a message no valid... I can go for $ 49, but just too stubborn to throw good money after bad at this point... Yes - I have removed the connection, hardware, resettled, updated, restart, stood on his head and blew bubbles outta my ass and still just get a local connection... This message is sent to a mobile solid XP pro sp3 5 yr old rock... SEND HELP PLEASE!

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  You must set up a wireless internet connection in the network as well as the connection sharing normal LAN wireless and connect to it as well as the local connection.  If you don't do this, you will not have an internet connection.  You need both.  You must also enable some features in the main area sharing network to access the internet - they are quite well defined.  If I were you, I remove all wireless Vista machine and set up from scratch.  I would like to even re - install the wireless network card drivers /, firmware or software just to be safe.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.

  I'm trying to update my ipad (first edition) to the new version and after about an hour, I get a message that says unable to finish because the network has expired.  How can I fix it?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Hello

  You need to support iPad not Microsoft.

  iPad - media choices
  http://www.Apple.com/support/

  iPad - Support
  http://www.Apple.com/support/iPad/

  iPad - communities (Forums)
  https://discussions.Apple.com/index.jspa

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.

  I can't connect to the Internet via the wireless network. It shows that I have local access only. I can't connect even in SafeMode with network.  I have Ping www.microsoft.com and the answer is "ping request could not find host www.microsoft.com.  I am connected to the network wireless through my iPad and can connect via my smartphone. This leads me to believe there is only something configured properly on my laptop. Can anyone provide assistance?

  Hello

  You can try a system restore...

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  .. .choose time, until this problem (you may tick to show more older restore points).

  Tricky

• network discovery, file sharing and public folder sharing won't turn on if the ethernet cable is removed and plugged

  Public folder of Windows Vista sharing problem.

  Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged. How can I prevent this from happening.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  It will be useful.

• My network has dissapered from my toolbar icon, so I can watch is no longer my online status

  original title: toolbar

  My network has dissapered from my toolbar icon, so I can watch is no longer my online status. I went in, and Start menu taskbar properties and looked under the notification area. Under system icons, the network checkbox is grayed out and I do nothing that do won't let me click on it. Ive also done a lot of other things, such as adding an icon, but for some reason any he will not find my network. I can get on the network and sharing Center, but can't find any way to get it as an icon in my toolbar. He disappeared in only an hour or two it y a. is there a way I can get it to the top? or even reset my laptop to get the icon back on, without losing any files?

  Fix network, clock, Volume and power (battery) system icons missing with disabled or gray check box Options

  http://www.mydigitallife.info/2009/01/01/fix-network-clock-volume-and-power-battery-system-icons-missing-with-disabled-or-grayed-out-check-box-options/

  I hope I could help

• Conflict error IP - 'another computer on the network has the same IP address as this computer.

  "Windows has detected that another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log. "I don't know what to do.

  I use Vista. How can I find my Windows system log?

  You're welcome Marilyn and thanks for letting us know. Please do not forget to mark this post which has solved this problem as the answer, when you are sufficiently comfortable that it is. Good navigation! :))

• Windows 7; Windows firewall prevents the discovery network, files and printers, sharing, public folder sharing and streaming media

  Windows Home Premium SP1, completely up to date.  Windows Firewall is enabled.

  Try to keep the file sharing and printers on a home network.  Try changing the settings on the control panel; All Control Panel items: Center network and sharing; Advanced sharing settings.

  When I try to change the option buttons for sharing, then click on save changes at the bottom of the page, the screen jumps to the network and sharing Center.  Object entering the settings advanced, no parameters have been recorded.   The comoputer restarting does not help.  I checked that the following services are running and set to automatic according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4bff-4dd3-acec-ffc3524d44a4;

  The base filtering engine
  DNS client
  Function Discovery Provider Host
  Function Discovery Resource Publication
  HomeGroup listener
  HomeGroup provider
  Server
  SSDP Discovery
  UPnP device host
  Windows Firewall

  When I stop the Windows Firewall service, I can activate the sharing I want.  Of course the windows firewall prevents sharing I would do on my network.

  I'm uncomfortable with Miss having a firewall work on my computer.  How to configure my Win 7 machine windows firewall to allow communications with my homegroup?  I tried to restore the default values.  This did not allow the communication.  I tried to find the homegroup settings in the advanced settings of the windows firewall.  No luck there.

  What should I do to configure my windows firewall to allow network discovery and file sharing of printers and media streaming and sharing?

  Hi stephanie,.

  Thanks for joining us out on Microsoft Community Forums.

  Looks like the Windows firewall prevents the discovery network, files and printers, sharing, public sharing of files and streaming media. We will analyze and identify the cause of the problem.

  You have a third-party antivirus installed on the computer program?

  Method 1:

  To turn on network discovery
  
  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the left pane, click on change settings for sharing advanced.
  2. click on the chevron to expand the current network profile.
  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide
  confirmation.

  The article below explains all about the network discovery:
  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-network-discovery

  If any of these responses not solve the issue, let us then run the sfc scan and check if any file system is corrupt. I also recommend to perform a clean boot in order to find the root cause of the problem.

  Method 2:

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833

  See also:

  Open a port in Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/open-a-port-in-Windows-Firewall

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-in/Windows7/allow-a-program-to-communicate-through-Windows-Firewall

  Hope this information helps. Get back to us if you have more queries about Windows.

• Windows 7 - error message from the address conflict IP appears periodically. Error message "another computer on the network has the same IP address as this computer.

  Error message "another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

  Does anyone have a simple way (for a dummy) to solve this. If I disconnect my wireless router and laptop and turn the two again this sorts the problem temporarily, but it does not provide a definitive solution.  I use a new laptop and my old one has been scrapped, so I do not know whence this 'conflict '.  My old laptop had Windows XP operating system and my new Windows 7.  I hope that someone can provide a solution to this annoying problem.

  Hi Figgerty,

  have you tried these steps?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/IP-conflict-error-another-computer-on-this-network/4eed87e2-45FD-4FF7-ae29-9a9fb664a8cc

  B Eddie

• This application cannot be run from a network drive. Please copy to a local drive and run it again

  GETT this error message when I try to install the Manager of cloud applications.
  Using a Mac with Parrellels running Windows 7.

  Tried to copy the file to a folder on my desktop and get the message:

  "This application cannot be run from a network drive. Please copy to a local drive and run it again. »

  Any suggestion would be appreciated.

  Thank you

  Brett

  Brett can you please try to download and install Adobe Application Manager of http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773.

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• "Connection to the local network has no a valid IP configuration".

  Original title: Windows 7 no internet access

  Hi guys,.

  Really need help. Please go to this link and help him, I'm desperately needing help.

  http://www.SevenForums.com/network-sharing/328316-Windows-7-wired-network-problem-no-access.html

  Hi Mario,.

  I imagine the inconvenience that you are experiencing.

  1. What is the brand and model of the router and the computer?

  2. what troubleshooting steps you already performed?

  I recommend you to follow the steps suggested by Amrita M on August 24, 2010 from the link and check if it solves the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/local-area-connection-does-not-have-a-valid-IP/9f6b8b68-58a4-46af-b7bf-9001c69cd045

  Also check the link for more information:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• ESW-520-24 P has not managed the custom VIRTUAL local network traffic

  Hi all

  We recently bought a switch ESW-520-24 p to replace a CE500 end-of-life.  The facility where the switch is installed has access wireless connected to the VLAN 110 points.

  Course the ESW-520-24 p switch does not support VTP so none VLAN is to be propagated to it.  So I created 110 VLAN manually and ports assigned to him.  But the devices on ports communicate with anything.

  All ports are configured as access with 110 ports VLAN not identified.  The uplink is the g2 port which is in binding mode.

  Can someone please tell me what I can have configured wrong?

  Thank you

  -Steve

  Hi Steve,.

  If it is for UC500 installation, the default configuration on the ESW is normally perfect and the switch has to be turned on.

  Otherwise that looks like you have made the correct things.

  I guess VLAN1 is always present on the ESW switch, but excluded by access ports...

  All ports are not marked in VLAN110 except for the uplink, given that the packages of vlan tagged while waiting to switch receiver VLAN110 or unmarked packages?  (something to think quickly)

  But the result is if you are still in a stalemate, why not call the Small Business Support Center, the switch is probably still under warranty and telephone support.

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

  Best regards, Dave

• network unidentified Ethernet / without Internet / public network

  Help, please!

  I can't connect to any device through the ethernet cable on my laptop (Windows 7 ultimate)

  I am currently trying Internet share my connection wirelessly with my panasonic tv but I am unable to do so. The funny thing is that the laptop can see tv as a media device and can spread via home sharing (occasionally) but when it is connected via an ethernet cable is a network not identified without internet access and stuck as a public network.

  The trouble is that I have connected my xbox 360 to my laptop in the same way in the past and it worked without any problem at all (a few years back however and I'm not sure if it was before I upgraded to windows 7 since vista). The xbox 360 now has the same problem of a network not identified, etc.

  The farthest ive come to connect my panasonic gave me an error message that there is no default gateway, but most of the time there is no activity at all.

  I have also uninstalled and reinstalled the drivers and enough and ipconfig/flush, / renew to the prompt with nothing

  the ipconfig/all of the cmd.exe is as follows:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\Rob>ipconfig/all

  Windows IP configuration

  Name of the host...: Rob - PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Home

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Broadcom NetXtreme 57xx Gigabit controller
  r
  Physical address.... : 00-21-9B-D4-7B-F3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::f0b7:1da8:d2c5:a26e % 21 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.162.110 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 452993435
  DHCPv6 DUID customer...: 00-01-00-01-14-E2-59-E1-00-21-9B-D4-7B-F3

  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  Physical address.... : 00-1F-E2-DD-F2-A2
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Home
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-21-5C-5E-F3-B7
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::250a:8576:5f88:2412% 10 (Preferred)
  IPv4 address: 192.168.0.6 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 6 March 2012 02:24:28
  End of the lease...: March 7, 2012 02:34:03
  ... Default gateway. : 192.168.0.1.
  DHCP server...: 192.168.0.1.
  DHCPv6 IOOKING...: 184557916
  DHCPv6 DUID customer...: 00-01-00-01-14-E2-59-E1-00-21-9B-D4-7B-F3

  DNS servers...: 192.168.0.1.
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter ISATAP.Home:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Rob >

  If someone could help I would be eternally grateful

  Thanks again

  Rob

  Re: Fix for "Unidentified network" / no Internet access

  Solved ..................................

  The problem has been solved by going into the wired adapter (Local area connection network controller) in windows Device Manager, select the device right clicking Properties, select Advanced--> property--> address--> value network and enter an address mac (OR existing checking the ipconfig/all from the command CMD prompt) then the ok button. After that the internet access was restored.

  I don't know what caused this problem. with the machine in question, I did a factory restore to solve another problem that has solved the restoration and all trying to update windows discovered this problem. I don't really like this fix because it may trigger things upwards later if by chance another device has the Mac as the made-up an i.

  in any case, thanks for your help - techguyisme

  Oops, I forgot to say what the problem was! the mac address of the wired network adapter adapter was all zeros 00:00:00:00... (see the ipconfig/all command in the original post of exit); so I changed it to something other than zeros

• HP Officejet Pro 8610: two printers on the same remote network model will not be printed, but local will be

  I have two furniture stores that are run on a windows sbs2012. Recently, both off my all in printers are down in the same week. The first was at the location where the server is actually housed. I bought a HP Officejet 8610 and managed to put in place without problem a lot via a wired network connection. So I decided since who went to buy the same model for my remote which is also connected, but it has a wireless access point. I was not able to get anything to print from my main software called profit systems. I can get things to print to the shared remote drive. I tried uninstalling and reinstalling, but even if connected as long as administrator I get a error that reads "this operation has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. I put it up as both just and redirected network and it shows it as ready in the State, but after it clears the queue that nothing prints. I checked firewall settings and all with HP is checked on. I'm pretty computer but I am full of ideas. Help, please!

  So after that I lost two days of my time and more than two hours of my time of I.T. guys it came to our attention that the driver IS NOT SUPPORT this model of HP JO 8610 redirected remote office printing! HP really, really?  So we have to install the driver 8600 on the server and local computers to get things to print. Problem solved, but it's just sad that this was the problem.