Photosmart 6510 - Windows 7 - I need to the Port ID to set up my modem for wireless connection
Printer: PhotoSmart 6510
Operating systems: Windows 7
Modem: Huwawei E586
The printer configured easily to the modem for wireless connection.
The problem I have is that my laptop cannot see the IP address of the printer when I try to configure a wireless connection.
I am trying to add the IP address of the printer to the virtual server from the modem list.
What is the PORT ID required by the printer?
This information is not in the installation notes.
I found it. It is Port 9100
Tags: HP Printers
Similar Questions
-
When you work in Firefox, is there a way to open a new window with a site when the House on Firefox setting has several Web sites?
Firefox always opens a new window with the home page (s), you must use shift + left click on a link (bookmark) to open a page in a new window or just rip an existing tab by dragging the tab slightly downwards to open the tab in a new window.
-
Network Installation unsuccessful Photosmart 6510 Windows XP
Wireless printer: HP Photosmart 6510 B211a
Router: Netgear WNDR3700, 802.11 g, WPA2-PSK
Windows XP
Photosmart 6510 series driver and SW ver 24.2.0
When I try to install the driver, the Setup program reports "installing network without success." The installation program detects the printer, but does not end.
The printer has network connection. It responds to ping, it works with HP ePrint, it displays Web pages on its IP 192.168.1.2. Test report wireless says that everything is OK.
I uninstalled and reinstalled several times without success. Always the same problem "network unsuccessful installation.
I'm looking forward to advice on how to solve the problem.
I rebooted the router and re-installed the driver. Network installation has always fails. So I ran the Print utility and doctor Scan. Printing and scanning doctor found that the driver was not installed and advised me to download the driver from the HP site package Support & drivers.
I downloaded and installed by using the downloaded driver package. The installation was interrupted by a Win32 exception:
I installed the driver once more (without uninstalling), now with SUCCESS! My Photosmart 6510 is now running.
Thank you!
-
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Photosmart 2600: Windows Update failed to install the updated driver for HP Photosmart 2600
I am more convinced that my HP printer will not work in Windows (64-bit) 10.
I am in my third day of repeatedly uninstall, download from HP Photosmart and Officejet full feature software and driversand restart constantly to try to get ALL IN ONE completely installed only to encounter continually
Fatal error installing C:\. Local\Temp\7zS2936\hpzsetup.exe - wStub 1836654
Range of all-in-one printers, HP Photosmart 2610v model #: 6543 serial No.: MY48CD57KNI was one of the first to report the problem of update of flash player and the new installed update.
Today, I went to view the Windows update history and concluded that
Update drivers Hewlett-Packard HP Photosmart 2600 Impossible to install several times
This driver has been provided by Hewlett-Packard for support of HP Photosmart 2600
by clicking on the links more information to
http://sysdev.Microsoft.com/en-us/hardware/support/default.aspx
who says
Driver information: coming soon Please use Windows Update.The more information is not yet available. We apologize for any inconvenience.
I suspect that it has been built as a solution by either the HP print and Scan for Windows doctor
or the Web Site of the HPProduct during one of my attempts at troubleshooting re - install,I would like to find a way to get another attempt to load the update but to find a way to do it.
Hello
It will not find page updated because it is not available but please try to download the software and the following driver and install on your computer:
http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110188-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe
Hope this can solve the problem of update.
Kind regards.
-
I recently installed Windows 7 on my PC, and now when I try to set up a new wireless connection, it's impossible. My plug-and-play wireless adapter is not recognized by the computer (but he did more earlier today before installing Windows 7). NETGEAR has the appeal of Microsoft, Microsoft refused to help me for less than 80 bucks, which I can't afford, after buying their product of GD.
So I was wondering if someone can help me? On my laptop when I go to the networks and together a new network, there is an option to set up a WIRELESS CONNECTION. Can someone help me please? I can't afford $ 80 to tell what drivers to download.
Thanks and + karma to one who can help me solve this problem.
Most often when a device does not work, it's because the driver has been corrupted.
Try reinstalling your.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1
http://captaindbg.com/how-to-update-drivers-on-Windows-7/
-
Photosmart HP 5510 series: printer for wireless connection software installation CD
Hi all
I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!
Hello
Thank you for using the HP forum.
You can download and install the software COMPLETE features of HP printing for your operating system:
Please select your printer and win 10 OS before you download and install the FULL features software.
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
Hope that helps.
-
Network Installation unsuccessful Photosmart 6510 Windows 7 64 bit
Photosmart HP 6510
Windows 7 64 bit
Unsuccessful network installation
No Antivirus or 3rd party firewall.
Windows Firewall disabled
I have the printer last year and he didn't want to install via USB. He said peripheral usb not recognized. So I thought it was the cable and I don't have a different cable at the time I decided I would install it when I get a wireless router.
Now I have a wireless router last week and it still won't install on my computer. The printer/PC are connected to the same network and the SSID is unique. The computer can see the printer, the printer is connected to the internet, and he did the updates wireless. He used to install I went to the resolution of the problems that it installs on your desktop and worked my way through all the solutions and it still woudn't work. Now what? I'm at the end of my home...
General
Network status: Loan
Active connection type: Wireless
802.11 wireless
Status: Connected
Mode of communications: Infrastructure
Of signal quality (1-5): 5
Authentication type: WPA - SPK
Encryption: Auto (AES or TKIP)
Configuration source: Manual
Port 9100
Status: Activated
Hello
Status: Activated
SLP
Status: Activated
Microsoft Web Services
WS discovery: Activated
WS Print: Activated
PPI
Status: Activated
Something wrong? I would recommend a complete uninstall of the HP - use HP software uninstalling the software in your programs folder.
Restart your PC.
Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.
-
Reinstallation of Windows 7 download needed after the replacement of hard drive and Vista restore
I replaced a hard drive crashed and restored the original Vista 32bits. I have the product key for the upgrade of Windows 7 that I bought a year or two ago. I now need to find the download for my relocation (without paying again). Where should I go for the download?
I replaced a hard drive crashed and restored the original Vista 32bits. I have the product key for the upgrade of Windows 7 that I bought a year or two ago. I now need to find the download for my relocation (without paying again). Where should I go for the download?
If you purchased Windows from the Microsoft Store, you can log on to your account and select the correct level of bit for download, then download.
http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102
How to order the replacement drive:
Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
Photosmart 6510 does not have access to the wireless router.
I get the hardware address to ip assinged that begins with 169 and not the ip address of the network of 192. Was told by HP support yesterday that he had to do with my pc services at startup it prevents access to the network. My pc has to do with anything? The printer is independent and should be able to access the wireless router, all my other wireless devices has no problem with this printer. Sometimes I can get it but can't always, what is the point of a wireless printer, if it cannot operate as a? Someone at - it a way to ensure that my printer gets ip address, it must without having to start everything each time?
No, this router should work perfectly. There are a few settings on the router that are important:
1. ensure that the 802.11 g mode, with 802.11n is fine, but 'g' must be present.
2. make sure that the name of the wireless network is broadcast.
3. don't use MAC filtering on the router.
4 set the channel of the router on 11.
5. make sure that the router firmware is updated.
-
I have acquired my Office 2010 through a program of purchase - paid, downloaded, installed (3 licenses)... All licenses have been used. When I update will I be able to carry on this setting? I don't want to buy Office again just because I upgraded my OS.
Any ideas?
It works perfectly. You may need to opt for the activation of the phone.
BTW, you have unlimited activations. You can only have installed on three computers.
-
Vista Windows
restore point
lost password
no admin accout has activated the parental controlVista Windows
restore point
lost password
no admin accout has activated the parental controlThis forum banned anyone asisting users to bypass the protection password... no matter what are the reasons.
Please see this link to the policy:
-
Ineed to install an audio driver, when I go to do this, I get a message that says my computer / Win 7 is configured to never install drivers. How to change that?
You don't want to automatically install drivers from Windows Update or another source.
If you want to update the drivers, do it manually and get them directly from the device manufacturer websites.
Do NOT use the finders of pilot no more...
-
Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.
Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.
I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.
I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.
I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.
Interestingly, when I am connected to hpsetup, I can print.
Can someone help me to re - connect this printer? I'll save the reason for reset for another post!
Thank you very much!
FIXED! Sunshyne2005, thanks a lot to direct me to the solution!
Here's what worked:
- Connect to hdsetup
- Press the report Page button on the printer (the one with the box)
- Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
- Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
- Enter the SSID (name) of the wireless network and the password
- Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )
Thanks again, Sunshyne2005!
-
where to find the switch for wireless connection on computer laptop esprimoV5535
get the message {connection Wi - Fi doesn't work}, but it is not no matter what visible switch on laptop so presumably its located
via the keyboard
Hello
· If it works much earlier?
Through my research, I think it's the F1 key, you need to press on and press and hold the FN key (lower-left beside Ctrl) at the same time. This should illuminate the LED on the front of the computer laptop-extreme right wireless.
You can view the documentation for the laptop to switch wireless for more information.
For any other help, I suggest you to contact your laptop manufacturer support.
Here is the link: http://support.ts.fujitsu.com/Download/Index.asp?lng=COM&Level1=&LNID=44
I hope this helps.
Maybe you are looking for
-
I recently started to use Excel on my iPad and I l is fine for as much. However, I like to use the same worksheet for each month and erase all content but I can't find a way of erasing of content but keeping all the formulas. I found how do this on a
-
LED power button problem FIXED on Satellite P300
ToshibaLED power button fix ToshibaSatellite P300-h-13 By ThomWijtenburg First of all, I would like tosay you that I came up with this correction, after a clean reinstall of theVista. (I used the serial number of windows on the bottom of my laptop fo
-
M1522nf freezes at startup with >; >; >; >; >;
Hello for a week, my m1522nf printer does not work. When I start it up, I'm getting > and then he stuck. Anyone know what I can do? Thank you.
-
NI-CAN 8464 with database in the RT!
Hello together, I have a normal office PC cards Xnet with other PXI NI-CAN 8464 card operation real time sysmte. It's easy using the file of a dbc with my XNET (deploy it and call the signal), but I have problem calling my dbc with my 8464 file! I ma
-
Cannot install the CD of casual games by Valusoft.
I can't install betst games casual world by Valusoft. I followed their instructions, click Run and then type d: / / launch and follow the instructions. nothing happens, just a little mechanical noise in CD thing. any suggestions? Thank you