Problem with installation of iTunes with Windows 7 64 bit

Similar Questions

• Problem with Windows 7 64 bit box

  Hello

  I have a dell inspiron 545MT with integrated hi-definition audio channels that came included

  I downloaded the HD audio driver on the dell site.

  I recently bought a pair of speakers Philips SPA7360 consisting of a subwoofer + 2 satellite.

  These works out of the box, plugged into the subwoofer low socket in Linux, so this is not a problem with the speakers

  To juggle with the HD controller under windows, I see

  stereo (which gives no sound)

  Quad-n/a

  5.1 + 7.1, where the left satellite loudspeaker works as the speaker "centre" and the right hand as the subwoofer in the tests... but on trying to play... There is no sound

  I only use windows for netflix and at the present time, can use the line-out socket which gives only through his right satellite speaker.

  Please note that I have reinstalled windows many times in the past without having to install the drivers from the CD, so I hope that's not the question

  Yes, it seems that you have a problem with this decision.

• PROBLEM WITH WINDOWS 7 64 BIT & PRINTERS

  Hello

  My company is replacing all of our window xp machines and we head to widows 7 64-bit. We currently have a print under windows 2003 server.
  I downloaded the universal readers of hp windows 7 64 bit, the new drivers for a printer, goes \\servername, view the remote printers on a windows 7 64 bit pc, and adding drivers 64-bit configuration. On the print server, I can see in this printer, additional drivers x 64 windows XP and Windows Server 2003 driver installed.
  My first question is that correct? Shouldn´t I see something like windows 7?
  After that if I try to add the printer to the pc windows 7, is going to add a wireless network..., select a shared printer name, I always get the error as it is impossible to connect to the printer. Operation failed with error 0x0000007e.
  However if I try add, using a tcp/ip address or the hostname of the printer is installed ok.
  Is it possible that something to do with the driver? It is not picking up the right one?
  Thanks and rgs,
  Ricardo Mendes

  Hello

  This solution seems to have worked for multiple users.

  Note:

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  To connect to your server, start "regedit" and go:

  HKLM\SYSTEM\CurrentControlSet\Control\Print\Printer

  And remove the key, "BIDI" again try to install your printer, it should work.

• Blue screen problems with Windows 7 64 bit

  It's my first time ever to come here so go easy on me if I have not posted correctly haha.
  Anyway, I came here to see if anyone can help if all goes well shed some light on the issues I'm having. I get these blue screens recently and below I have posted some of the recent issues. To follow and the State for the record that I am aware of a RAM problem that I'm trying to hash it out, but it seems not matter what I always blue screens. I am considering a complete replacement of the RAM, but before you start spending money I don't have I want to get some opinions more. I'll post what I can which may or may not help but any constructive contribution will be GREATLY appreciated.
  
  
  
  
  It's happened today:
  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information about the problem
  BCCode: 3B
  BCP1: 00000000C 0000005
  BCP2: FFFFF960002C66DC
  BCP3: FFFFF8800E988CB0
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1
  Bucket ID: X64_0x3B_win32k + 2566dc
  Information about the server: d597ded6-f553-4a5b-962c-9fef9d479eb8
  It took place on 26/04/13:
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 101

  BCP1: 0000000000000031

  BCP2: 0000000000000000

  BCP3: FFFFF880009E9180

  BCP4: 0000000000000001

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_CLOCK_WATCHDOG_TIMEOUT_4_PROC

  Information about the server: d179de1f-a3f4-4303-8fe7-d91692670210
  This happened on 24/04/13:
  
  
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  Additional information about the problem

  BCCode: 1a

  BCP1: 0000000000041790

  BCP2: FFFFFA800135CB70

  BCP3: 000000000000FFFF

  BCP4: 0000000000000000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Bucket ID: X64_0x1a_41790_nt! MiDeleteVirtualAddresses + 40330

  Information about the server: 407de12b-0f29-45e1-a934-e63146fe2f26
  I don't know if this is necessary, but I used my Steam to obtain more detailed information on my system. All that may be necessary let me know.

  Processor information:

  Seller: AuthenticAMD

  Speed: 2511 Mhz

  4 logical processors

  4 physical processors

  HyperThreading: unsupported

  FCMOV: supported

  SSE2: support

  SSE3: support

  SSSE3: unsupported

  SSE4a: support

  SSE41: unsupported

  SSE42: unsupported

  Version of the operating system:

  Windows 7 (64-bit)

  NTFS: support

  Crypto Provider codes: supported 311 0 x 0 0 x 0 0 x 0

  Video card:

  Driver: NVIDIA GeForce GTS 450

  Name of the DirectX driver: nvd3dum.dll

  Driver version: 9.18.13.1422

  The DirectX driver version: 9.18.13.1422

  Driver date: March 14, 2013

  Desktop color depth: 32 bits per pixel

  Monitor refresh rate: 59 Hz

  DirectX card: NVIDIA GeForce GTS 450

  VendorID: 0x10de

  Device ID: 0xdc4

  Number of monitors: 1

  Number of logical video cards: 1

  No SLI or Crossfire detected

  The main screen resolution: 1680 x 1050

  The desktop resolution: 1680 x 1050

  Main display size: 23,35 "x 14.57" (27,48 "diag)

  59.3 cm x 37.0 cm (69.8 cm diag)

  Main bus: PCI Express x 16

  Main VRAM: 1023 MB

  Supported MSAA modes: 2 x 4 x 8 x

  Sound card:

  Audio: speakers (VIA A high-definition

  Memory:

  RAM: Mb 6143

  Various:

  INTERFACE language: English

  Media type: DVD

  Total disk space: 152586 MB

  More great free block on the hard disk: 26355 Mb

  Humility101

  Sorry just missed your post.  22 of the 35 were directly related to the corruption of memory
  

  These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

  * Don't forget to download any other DMP files (especially those running auditor)

  * If you are overclocking reset all default before running these tests.
  In other words STOP!   If you don't know what it means that you're probably not

  1 - Memtest.
  * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
  * Boot from the CD and let it run at least 5 or 6 passes.
  * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
  * Test the sticks individually and if you find a good, test it in all slots.

  Any error is indicative of a memory problem.
  If a well-known stick fails in a slot of motherboard, it's probably the slot.
  
  2. Driver Verifier
  Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

  * But sometimes it will crash and will not tell you the driver.
  * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
  * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
  * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).
  
  Here is the procedure:
  -Go to start and type "auditor" (without the quotes) and press enter
  -Select 'Create a custom settings (for code developers)' and click 'Next '.
  -Select "Select individual settings from the list complete" and click "Next".
  -Select the entire document except for "Low resource Simulation" and click "next".
  -Select "Select driver names from a list", then click "next".
  * Select all drivers that are NOT supplied by Microsoft and click on "Next".
  -On the next page, select "Finish".
  * Restart the system and wait as he crashed to blue screen.
  * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
  * If you are unable to Windows because it crashes too early, try safe mode.
  * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

  * Further reading
  http://support.Microsoft.com/kb/244617

• Battlefield 1942 problems with windows 7 64 bit

  I have install BF 1942, well, but when I click on any button (single player, multiplayer, game, custom, etc.) the game freezes and crashes to the desktop... ran the game in win xp sp2 mode, still nothing... have run in administrator mode, still nothing... even tried downloaded... Windows XP mode which does not yet detect my video card / sound , so therefore does not load the game cause the value default of those charge are like a map of vid 1 mb ;(

  someone has an idea on how to get from 1942 to work on windows 7 64 bit?

  -------------

• Problems with Windows 7 64 bit IE

  I have windows 7 64-bit os and IE9 has been installed when I did the transfer of windows as a 32-bit I want to uninstall IE9 and instal IE11 but can't get rid of IE9 not tried the ususal, but it does not show even in programs and features to uninstall when I downloaded IE 11 it crashed not saying don't no need for my computer any help please

  Hello

  It is listed under "Installed updates"; delete it from there.

  "How to install or uninstall Internet Explorer 9?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9

  To uninstall Internet Explorer

  The following instructions apply to Windows 7 and Windows Vista.

  1. Click the button start , type programs and features in the search box and then click the display installed in the left pane updates.

  2. Under uninstall an update, scroll down to the Microsoft Windows section.

  3. Right-click Windows Internet Explorer 9 and click on uninstall and then, when you are prompted, click Yes.

  4. Click one of the following:

     • Restart now (to complete the process of uninstalling Internet Explorer 9 and restore the previous version of Internet Explorer).

     • Restart later

  See you soon.

• I have problems with Windows 7 64 bit connect my drives external iomega.

  A pop up keeps appearing saying 'it is the first time you tried to connect to these readers' even if I have linked dozens of times. This problem started about two months ago. With this pop up another 'permission' box pops up saying that I have to re - enter my credentials every time I turn on my laptop. Also, I noticed some of my iTunes songs download, but it says that the songs are there AND my automatic update for my laptop did not work. Any help would be great!

   

  Hello

  1. do you receive an error message when running automatic updates?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Run the troubleshooter from the link.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Run the troubleshooter for Windows Update problem.

  See the link.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  For any question related to iTunes, I would say to contact iTunes support team for assistance.

  https://discussions.Apple.com/community/iTunes/

• problems with windows vista 64-bit. I did not drive, the PC is HP brand,

  Windows does not start. a recent hardware or software change might be the cause.

  1 insert the disc
  2. choose the language
  3 click on repair

  If no disk so forth and so

  file: \boot\bcd
  status: 0xc000000f

  I can't access safe mode or recovery mode through the f - keys for some reason, the only things that I can get to are the installation and the bios screen. tried pulling the cord/battery and unplugging everything, even tried using WinRE neosmart but nothing not done, Im at my intelligence stop there...

  any suggestions?

  Hello

  If you do a cover, here is the information of HP:

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  See you soon.

• Installed Windows 7 64 bit - 4 GB / 3 GB usable, whereas with Windows Vista 64-bit - 4 GB usable

  Hello
  I have the Asus N70SV B1.

  Specifications: (http://www.asus.com/Notebooks/Multimedia_Entertainment/N70Sv/#specifications)

  No problems with Windows Vista 64 bit, recognizing the 4 GB of RAM. After the upgrade to Windows 7 64-bit 4 GB installed / usable RAM problem / 3 gb. I also checked the following.

  1. I am running windows 7 64 bit, NOT 32 bit, I wouldn't be able to run Adobe After Effects® CS5.5 and Adobe first® Pro CS5.5 elsewise.
  2. the unusable 1 GB of RAM is not used by the operating system, it's hardware reserved
  3. the video card Nvidia GT 130 m 1 GB, shouldn't need that RAM - it certainly didn't on the factory installed Windows he dedicated RAM.
  4. I tried disabling and enabling msconfig - boot - Max memory settings, no option solves the problem.
  5. He has no option of memory in the BIOS settings to disable the cache in memory / memory the occultation.

  * I had to use the 64-bit of Windows Vista sound drivers work correctly with Windows 7 64 bit. So I thought that the version of bios or Vista 64 bit can thus solve the problem usable 4 / 3 gb.

  * Yes, I have flashed the bios to Windows Vista 64-bit and that still does not solve the problem. Although the system seems faster, it still shows only 3 GB usable.

  There should not be a problem with this bios version seen only with the 64 bit Vista OS recognized all 4 GB.  I am confused and have no idea where to go from here.

  Please help.

  Hello

   
  I suggest you to contact the manufacturer of the computer for help.
   
  Thank you!

• Problem with Windows Installer (I think)

  Hey I just got a new 'game' PC with all the good things like i7 processor nvidia GTS 250 graphics card. So I guessed I would setup games. Games were installed very well the problems started when I tried to run SteamInstall.msi he looks ready to install for 1 second and then close and nothing happen. Even try to do once again nothing. So I gave up with it.

  Then I installed cod4, codwaw and download for both patches. When I try to install the patches it starts normal and after extractinng saying "" ".msi or msu or something it get stuck on the preparation for installation on both cod4, codwaw games and I think about others too... '".

  So I guess that's my Windows Installer problem... ? Windows Vista Home Premium SP2 (problems on SP1 also)

  Yoris,
  I think that if you had a problem with Windows Installer, then you would have also had a problem installing the games themselves.  If after installing just the game, you are able to start the game, then you will need to determine if you really need the patches you install.  If they fix game issues and do not add any content, then you may not even need of patches.  If it turns out that you do not have the patches and they are self extracting\installing files and then save them to your desktop and then right click and select run as administrator and see if that helps.  You can also check with Activision support , because this can be a problem they know. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Installer after using System Mechanic.

  I had a problem with my Dell 2 years and was told by the Support Dell buy iolo System Mechanic. However, now I have problems with Windows Installer (it is not installed correctly) and I've read that this can be caused by the registry cleaner in the iolo System Mechanic.

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  Thank you!

  original title: Registry Cleaner/Windows Installer

  So, really two questions: 1. do I need iolo System Mechanic? 2. how to correctly install Windows Installer?

  1 no, the registry cleaners can give you immediate relief, but they are a big pain in the long term.

  2. follow the four methods listed in the resolution section of the following article:

  http://support.Microsoft.com/kb/2642495

• I'm having a problem with "Windows Installer"... Can't find a way to heal or recharge the program?

  I'm having a problem with "Windows Installer"... Impossible to find a solution to heal or recharge the program

  Hello

  1. what question do you face with Windows install on your computer?
  2. do you have an error message regarding the Windows Installer on your computer? If Yes, what is the error message?
  3. what task you were trying to do when you got the error message?
  4. have you done any software or hardware changes on your computer before this problem?

  Please refer to the section: Windows Installer issues in the following link.

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651/#reso1

  Further,.

  Please responses to the above questions and add additional information so that we can better guide you.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

  Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

  Hello

  Thanks for the reply with the details.
   
  Problem with opening PDF documents, please see the link and follow the steps in the article:
   
  Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
  http://support.Microsoft.com/kb/2669244#top
  Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
   
  See the link for the question with idevices:
   
  iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
  http://support.Apple.com/kb/TS2690
   
  Problem with TurboTax 12, check out the links and follow the steps:
  http://TurboTax.Intuit.com/support/IQ/install-product/reinstalling-the--NET-Framework/GEN12673.html
   
  5639 error: Cannot configure the product update system
  http://TurboTax.Intuit.com/support/IQ/update-product/error-5639--can-t-configure-product-update-system/SLN12386.html
   
  http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/SLN63018.html
   
  If the troubleshooting steps above do not help, check in a new user account:
  Reference:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account
   
  If it works in the new user account, then the current may be corrupt user account.
  To fix the damaged user account, follow the steps in the following article:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Problems with Windows Installer - installer stops and shows the dialog on the command prompts

  Hello

  I hope someone can help me with this question... I looked long and seriously, and you have tried all of the suggestions posted (cancel/save, etc.).

  I am trying to install a program and Windows Installer stops right in the middle of installation and a dialog box appears with information from command line, and the only thing I can do is select 'ok'... the program is not installed.

  Here is the info that appears in the dialog box:

  Windows® Installer. V 5.0.7601.17514

  msiexec/option [optional parameter]

  Installation options
   
  Installs or configures a product
  /a
  Administrative installation - installs a product on the network
  /j [/t ] [/g ]
  Publishes a product - m for all users, allows the current user
   
  Uninstalls the product
  Display options
  / quiet
  Quiet mode, no user interaction
  / passive
  Automatic mode - only progress bar
  / q [n | b | r | f]
  Sets the user interface level
  n no user interface
  b Basic UI
  r reduced UI
  f-full UI (default)
  / Help
  Help information
  Restart options
  /norestart
  Do not restart after the installation is complete
  /promptrestart
  Prompts the user to restart if necessary
  /forcerestart
  Always restarts the computer after installation
  Logging options
  / l [I | w | e | a | r | u | c | m | o | p | v | x | + |. | *]
  i status messages
  w warnings recoverable
  e-all error messages
  a startup of actions
  r registers of the specific action of the
  u user requests
  c initial UI parameters
  m out-of-memory or fatal exit information
  o disk out-of-space messages
  p - Terminal properties
  v performance
  x extra debugging information
  + - Add to the existing log file
  ! -Flush each line in the log
  * - Log all information, except the x and v options
  / log
  Equivalent of / l *.
  Update options
  / Update [; Update2.msp]
  Apply updates
  / uninstall [; Update2.msp] / package
  Remove the updates of a product
  Repair options
  /f [p | e | c | m | s | o | d | a | u: v]
  Repairs a product
  p only if the file is missing
  o If the file is missing or an earlier version is installed (by default)
  e If the file is missing or an equal or higher version is installed
  d if the file is missing or a different version is installed
  c If the file is missing or checksum does not match the calculated value
  has all the files to reinstall the forces
  u all (default) user-specific registry entries
  m all requirements (by default) computer-specific registry entries
  s all (default) shortcuts
  v-runs from source and recaches local package
  Setting public properties
  [PROPERTY = PropertyValue]

  Consult the SDK Windows® install to get additional documentation on the
  command line syntax.

  Copyright © Microsoft Corporation. All rights reserved.
  Portions of this software are based in part on the work of the Independent JPEG Group.

  I hope someone has a suggestion for this problem... I just bought a new laptop and Windows 7 Professional came installed on it.

  Thank you

  Linney thanks for your response!

  The file I'm trying to install is an exe file (so the SIG file is embedded in the exe file).

  I tried the option "Run As Administrator" and it did not work.  However, you gave me an idea that has provided a work around that allowed me to install the program.

  Once this dialog box is displayed with all the control switches, rather than press 'OK', I left on the screen and went in the 'temp' folder and find the MSI program I tried to install (I cross referenced the timestamp of when I tried to install it to find).

  Once I found the updated file, I clicked it, and he proceeded to install the program... I have not had any other problems with the installation.

  So, there's something wrong with the way that the exe file have been created and how the files extracted from the msi file (these are files of Intel and Lenovo - driver updates - so I think they do these things) or there is a problem with Windows Installer.

  For now, at least, I have a work around I use until I find a solution to this problem of permanent

  Thanks for your help and for taking the time to answer!

  I hope this can help someone else in the future

• Dual monitor boot problem with Windows 7 Professional 64 bit after installation of any graphics program like a game.

  I have built this platform with the help of the owner of a store of 4 cumputer teir 2 years ago. We initially put Windows Vista 32 bit on the system to Vista 64 bit unstable atm. For 2 years, the computer worked like a dream. Last week I made a clean wipe of windows vista and windows 7 professional 64-bit installed. The system has two monitors. The primary monitor is a sony bravia with 26 "led and secondary for watching movies is that a 55 '' led Samsung 1080 p 240 Hz. The graphics card is a geforce GTX 295 nividia. It has 12 GB of Ram and the CPU is an i7 965 @3.20.

  The problem I have is this. After the installation of any game average to work with windows 7, the screens to reset their resolutions automatically more than a few times as they are confused. Sometimes, I have to return the screen to its correct resolution after installation in full. Most of the games and then run fine. After installing the game or any game designed for win 7 startup of computers is all messed up for the monitors. After starting hand 26 "sets its resolution and then after about a second 30 pause the computer makes the sound (the double) that it is resolutuons to reset monitor again? After that this second reset about 1-2 minutes the computer is good to go, unless it sets the res evil. The problem is the computer has never done that with vista and it is very annoying say the least. It still freezes the installation of some games. The only way to resolve what I found is the restoration of the system. The computer starts normally and screen ground is defined once she has always been. The only problem is when you install another game, the problem is their new. This problem is worse in some games.

  The latest nvidia drivers have been installed. There is no conflict in the device with the exception of an old printer Manager. The two comes is set to 60 hertz. I searched all over the internet and there seems to be a problem with windows 7 without solution. I am at a loss. Any other information that you need let me know and I'll post it. Thank you!

  Hi ancientone618,

  It sounds almost as if there is a Windows update that is in conflict with your NVIDIA Driver Installer.  I would say to disable automatic updates of Windows to see if it might help:

  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  In addition, please see the article with some useful information:

  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think