Network - LAN stucks on the identification problem

Similar Questions

• HP Pavilion G6 2320 tx: lack of network (LAN/Wifi) on the HP Pavilion G6 laptop drivers

  Hi all

  I have a Pavilion laptop 2320tx g6 (Indian model) and I'm not able to find the right network drivers.  The laptop was initially provided with Windows 8, but I installed Windows 7 Home premium 64-bit and it is at this time that drivers stopped working.

  When I go into Device Manager, and then search for the drivers he finds nothing.

  This is the link to my laptop model page.

  http://support.HP.com/in-en/product/HP-Pavilion-G6-2300-notebook-PC-series/5330578/model/5354728/doc...

  My device ID MATERIAL are-

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C

  PCI\VEN_1814 & DEV_3290 & CC_028000

  PCI\VEN_1814 & DEV_3290 & CC_0280

  I would appreciate any feedback and help!

  I found a few links on the messages earlier, but they are broken and does not.

  Let me know if you need further clarification. Please help as soon as possible. :-(

  Try:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58586.exe

• Disk network LAN settings

  I've recently replaced under warranty, the HD on one of our laptops. This laptop has been previously connected to our local home-network page via a Belkin wireless router. The host computer is connected to the router via an Ethernet cable. I'm currently trying to re-establish the connection of this laptop in our home LAN. already, it is correctly connected to the internet through the router, but it cannot access printers or files on other LAN computers until I can load network LAN settings. The problem is that the Network Wizard on the desktop of the host (Windows XP) allows the reproduction of these settings on a tape player, while the Office has only a CD/DVD drive. Any ideas?

  You don't need a "network configuration" disc (ask the wizard for setting up the network to a disk, not a "tape", but your laptop probably doesn't have a floppy or by car).

  If you are already connected the laptop to the router enough for Internet access, all you have to do is to run the "Network Setup Wizard" on the laptop.  See this old, but still valid, MS MVP Malke advice network.

  We consider that you have Windows XP on the laptop.  If you have problems, when you post back, be sure to include the version of Windows (XP Home, Vista Home Premium, Windows 7 Professional, etc.) on the laptop, including service pack.

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Windows 7 64-bit slow start of blue circle hangs on the network icon in the notification area. Some programs don't load until the problem resolves. stuck at the screen of welcome for 5-10 minutes sometimes.

  Hello world.

  It will be long and windy.

  I have a problem with my ASUS G50VT - X 5.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. adjustment of splendid colors, services, programs of control really like network connections and things like that but some i can still run.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. for example, microsoft outlook and other things.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or services is causing the problem. found nothing.
  • run the cmd command, I think that the chkdsk. It digitizes and restores the registers according to me. did not help
  • Used norton. then corrected all the errors found and the questions. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the problem.

  im running Windows 7 Professional 64-bit. as if lately, about a week ago my laptop started to start, slow down and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also sometimes on occasion I will be stuck to the homescreen for 7-10 minutes.  also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away as internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a bit more resources. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  I also looked in the event viewer and noticed these problems...
  The winlogon notification subscriber took 916 second (s) to handle the notification event (Logon).
  -

  -

  6006

  0

  3

  0

  0

  0 x 80000000000000

  56201

  Application

  Collin-PC

  -

  TermSrv

  916

  Opening of session

  02000000

  and it was lower than...
  Bucket of error, type 0

  Name of the event: ServiceHang

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: LanmanServer

  P2: srvsvc.dll

  P3: 6.1.7601.17514

  P4: 20

  P5: 2

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERBC1D.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERBC1E.tmp.HDMP

  C:\Windows\Temp\WERCBA9.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_LanmanServer_958bb07ee47f1d58779ce0fb489791f2b7187bdb_cab_0de8cef2

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 0de8cd67-d5a8-11e0-a8a7-9ab1f0009500

  Display state: 6

  and below that,.,.

  The winlogon notification subscriber takes a long time to handle the notification event (Logon).

  Hello

  1. Since when are you facing this problem?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If you have not tried the steps in the following Microsoft article, then try to clean boot and check if it helps.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Step 1:

  If the problem persists, you can create a new user account and check what is happening. To create a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope the information is useful.

• Printing problems with XP and Lexmark-documents are just stuck in the print queue

  Original title: printing problems with XP and Lexmark

  Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

  I guess you do not have all of the error messages.

  It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

  Find the IP address of the printer of his network diagnostic page.
  Click Start > printers and faxes, right-click the printer and select Properties
  Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
  Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

  To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

  Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

• Interruption of the connection with the WIRELESS network and network LAN adapters

  After a virus attack that I got from a USB key, I lost contact with the WLAN and LAN network cards. Manage to clean your computer of viruses, but cannot access the network LAN and WLAN cards. They do not appear in Device Manager. Tried restoring the system to a point of backup in the time before the event, but it does not help. Tried to download and install the drivers, does not work either. Vista should find the network adapater after reboot normally, but this does not happen.

  * original title - lost contact with the WLAN and LAN network adapters. They does not appear in the device even Manager after restarting Windows Vista. I tried to download the drivers, but it does not either *.

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope that information was useful

• Computer not finding networks, stuck on the Logging Off screen in Vista

  For the past two weeks, if I simply close my laptop while it is running, most of the time when I try to open it up my wireless network does not connect automatically. I have to click 'Connect to' in my Start menu and manually connect to the network. The only problem is, sometimes it will fail to find a network and when I try to manually go to 'Connect to', it does nothing. Nothing comes up at all. I have to restart my computer. Once I try to restart, it sticks on the screen "Logging Off". I also tried to disconnect just opened a session back, but it's still stuck on this screen. I am then forced to make a hard closed down by holding down the power button.

  Any ideas?

  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Hello
   
  1. you broadcast the SSID of the wireless network?
  2. have you idea of changing the settings of the preferred wireless networks?
   
  Method 1.
  Try to change the order in which your computer connects to the network.
  The list of networks connected to before is sometimes referred to as your preferred wireless networks or your preferred list.
  a. open manage wireless networks by clicking the Start button, click Control Panel, click Network and Internet, click Network and sharing Center, and then, in the left pane, click on manage wireless networks.
  b. your saved wireless networks is displayed. To change the order in which your computer connects to networks, drag the networks upwards or downwards in the list.
  c. to change preferences for the network, right-click the network, and then click Properties.
   
  Method 2.
  Also, check out the articles below and check.
  http://TechNet.Microsoft.com/en-us/library/bb726942.aspx
  http://support.Microsoft.com/default.aspx/KB/929661
  
  Method 3.
  Also the question of trial in the State of clean boot and check. You can also check the shutdown problems in the boot.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   
  Method 4.
  Also check the eventviewer on stop error logs.
  Type eventvwr.msc/s in the address bar.
  The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  For more information on event viewer, see the articles below:
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• one of the VM cannot access network LAN

  Hello

  I configured 3 VM on an ESXi 4.1 (see attached jpg file). one of the virtual machine (GSPPBPCDBVM), it cannot access the network LAN, even cannot ping Bridge but can ping GSPPBPCVM after I walk today, previously, it was ok. The other 2 VM can access LAN network. What could be the problem?

  GSPPBPCVM (128.1.8.x)

  GSPPBPCDBVM (128.1.8.x)

  AEPAD (10.8.1.x)

  vmnic1 (to connect to the local network virtual 128.1.8.x)

  vmnic0 (to connect to the local network virtual 10.8.1.x)

  Thank you and best regards,

  Kelvin

  With the configuration you have posted, you have a 50/50 chance that none of your VM will have access to the network, since you have 2 NICs connected to two different VLANS and virtual machines are assigned to these network cards based on the virtual switch port (assuming you use the default settings).

  To properly set up the network, you have two options:

  1.) VLAN tagging on the physical switch ports (what you have)

  In this case, you will need to create a second vSwitch and attach the second NETWORK card to this switch. Then connect virtual machines to the vSwitch and port group that is connected to the switch port VLAN corresponding physics.

  2.) VLAN tagging on the virtual port group (this is what I recommend)

  Configure the ports on your physical switch as the trunk (or ports 'labelled' If you use Procurve switches), create another port VM on vSwitch0 group and set up VLAN tags on the gropus (VMKernel, VM Network1, VM Network2) port

  Take a look at http://www.vmware.com/files/pdf/virtual_networking_concepts.pdf for more information.

  André

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• HP g72-260us: HP g72 stuck at the start, none of the function keys work how to fix this problem

  Laptop stuck in the market and none of the work of function keys that I tried to unplug the HARD drive and reboot but it remains always stuck in the HP screen and function keys still don't work. what I can do to solve this problem too I just got install a new HARD drive and the operating system. And the driver, it worked very well. then I stopped it and when I went to restart what happened please let me know what to do
  Thank you.

  The hard reset worked thanks for the help!

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

  Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
  
  I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

  ipconfig/all statements

  Hostname...: wayne-PC
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  That's all. Windows gives errors two errors:

  (1) the card network knows of driver or hardware problems

  (2) check that your Internet Protocol connections are Correct

  I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

  I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

  Hi MButIer,

  -How long have you had this problem?
  -Was any change in software because the computer before the show?

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

   

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  If any document available please send my email id

  Thank you & best regards

  Martine

  Hello

  Thanks for posting your query to the Microsoft forum.

  Please see the suggestions in the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/msgexe-netsend-anything-availible-on-Windows-7/e9743edc-AFA9-4942-b1c7-66baf443067b

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/net-send-in-command-prompt-does-not-work/00ce5137-dff7-49e5-8511-943e55b83bd7

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni