Network xp to vista PC

Similar Questions

• Set up a home network on a Vista computer. Added my XP computer on the network. I can go on the internet but the signal strength is 'very low' 98% of the time.

  I used a d-link WBR-1310 Wireless G router to set up the network on my Vista computer.  On my XP computer, I used an adapter G USB 2.0 Wireless d-link WUA-1340.  Both computers are single room apart and most of the time, the doors are open, so there is no major obstacle to interfere with the signal.  This is my first experience on the implementation of a network and I must admit I was a little unsure of myself.  I don't know if I have some incorrect settings or if the problem may be something else.  It is a WEP secure network but I don't think that's the problem.  My XP computer on the network automatically signs as soon as it starts.  I am trying to download the LLTP from Microsoft on my XP machine, but I don't know if this could be the problem.  I've been struggling with this problem for almost 4 weeks and I'm getting very frustrated.

  PLEASE, I WELCOME ANYONE WITH AN IDEA OF WHAT I HAVE DONE WRONG, TO ANSWER!

  I'm sorry, but I read your post and I do not understand what the problem is you want to solve.  Is something that does not properly?  If so, please give us the details: what you're trying to do, what happens when you do that, the text of the error messages, etc.

• WRT310N has name of nonsense in network mode in Vista

  My WRT310N seems to work OK, but when I open the network view in Vista the name displayed for the device is gibberish.  It is currently ' 462-49462, tcp, on, MSNMSGR.  My firmware version is v1.0.07 - LS - HND.  Someone has an idea of what might happen?

  May be an another Vista "Feature", change the host name of the router. Should solve the problem

• I need help setting up a network between Windows Vista and Windows 7.

  original title: HELP me to SET UP a NETWORK FOR WINDOWS VISTA AND PORTABLE WINDOWS 7 DESKTOP AND a DLINK WIRELESS ROUTER

  HELP ME TO SET UP A NETWORK OF WINDOWS VISTA DESKTOP AND LAPTOP WINDOWS 7 AND A DLINK WIRELESS ROUTER

  Hello

  You can follow the procedure from the following link: networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows7/Networking-home-computers-running-different-versions-of-Windows

• map of access to the network denied on vista drive home premium

  try to map on cdrom dvd to boot windows xp and Notepad of windows 7, I can see both network drive. on vista, I gave permissions for each account indicating the article beforehand and I get always permissio denied. I logg on and passwords. I can't go to the other readers on vista, but no pc can go to my full permission mapped /shared/ / dvd cdrom. window Starter 7 note can go on the cdrom dvd on my windows xp machine. tried different microsoft registry entries - no joy-nero burning rights is defined for everone. can anyone there help seems to be a heavy workload problem other people have problems as well. Please can someone help.

  more > dvd properties have not a tab security on it, so I can't take property etc. of notebook of the icon/properties mapped to the advanced security settings, the current owner said "unable to display current owner" and I have no right to change it to take control of my notebook, when looking for tab titles for dvdcdrom there is no - is this my problem? installed dvdcdrom has not been given a tab of vista security? If the property is "nobody" so no other pc can access. -more than information - put a dvd in and share a folder on the dvd do not share either due to denial of access.

  foregoing >:-question:-how to set a security 'owner' in the registry for my vista re security settings dvdcdrom. so that the other pc can map to it.

  hereme is here.

  Hi hereme,

  1. how many computers is there is the same network?

  2. Why do you map CD\DVD drive?

  Instead of map the drive, you can share and check if it works.

  Share files with anyone

  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  If you want to map the drive to see the link below to a thread with similar problem and try the steps mentioned.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/2b3a4276-F078-4C67-9867-085d10765b28

  Note: Don't try the first step of the thread above that you are using Windows 7 starter edition.

  See also:http://support.microsoft.com/kb/947235

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the college network after installing Vista business on Satellite A215

  I have a Satellite A215-S4757, which I brought with me in College, I was told that the server of the College has a problem with vista home, which is what I currently the wireless is down, so after installing business and plug in the ethernet cable, my laptop does not collect several wireless networks available, or otherwsie

  What to say that you can also access the network using Vista.
  But please note that the Vista operating system supports additional network access security settings that should be disabled or reset.

  How this site published by Microsoft should help you set up the network with Vista settings:
  http://windowshelp.Microsoft.com/Windows/en-us/networking.mspx

  Here are several tips:
  You should try to open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.

  Vista supports additional firewall options. Please disable all trying to connect to the server.

• Pavilion PC 40f d61: WiFi adapters network for Windows Vista and Windows 7 64-bit download

  I just bought a new Pavilion with 10 Windows, but I would like to use my old Pavilion d61 40f PC (currently with Windows Vista, but soon be upgraded to Windows 7) in another part of my house, using a Wi - Fi connection.  I get the message "the ability of your network adapter does not match the requirements of this network."  From what I understand, I need to download PROWin64.exe to have a network adapter that is compatible with Vista.  My problem is that I can't download it if I don't already have an internet connection.  It can be downloaded to a flash drive and if so, how?

  I have the cable for internet and television and I tried to unplug the modem from my TV and don't connect using a cable ethernet at the back of the computer and a telephone jack, but still had no connection.

  If it is not obvious, I am a tech novice, an explanation with as much detail as possible would be greatly appreciated.

  New card arrived? Hope to hear your problem has been resolved by the latter.

• Upgrading a network to Windows Vista to Windows 7 computer

  I have a home network (XP based) which works very well for years.  Three computers, two printers, and all worked very well together.  It's just my wife and me, and network security has never been a high priority.  Now, I want to add new computers to the system, one is a Dell with Windows Vista laptop. and it is a HP with Windows 7.  I followed the Network Wizard I used before creating the network; I created a file and was walking and it ran on all of the old and new computers.  The two XP machines can still talk to each other fine, the Vista machine can see two XP machines - but the machines XP get a window "permission error" when trying to access the Vista and WIndows 7 machine is on an island, he sees not all computers and all computers get a login screen before you can access the Windows 7 machine; even if we have no password on the Windows 7 computer.  As I said - it's just my wife and me, and we have no password or sign ins on all machines and would like to keep this simplicity.  FYI - all thte computers can access the internet fine and all use the same router to do.  Please tell us how can I better return to the situation that I had before where I could sit to one count; access to all the others, without a bunch of security and authorization issues.

  Hello

  1. do you get any error message or error code when you access the computer on a network?

  2. what security (Antivirus & Firewall) program is installed on your computer?

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Method 1:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Check out the links below and check if this is useful:

  Networking of computers running different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Sharing files and printers with different versions of Windows
  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows

  Method 2:

  You can try to temporarily disable the Windows Firewall and Antivirus and check if the problem is resolved.

  See the link below.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: Windows Firewall turning ON once the troubleshooting process is finished.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Turn on your Antivirus program once the troubleshooting process is finished.

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Laptops Dell Studio 1555 network adapter in Vista problem

  I work with Dell Studio 1555 laptop computers that have Windows Vista Home Premium on them.  I had to reinstall Vista and drivers.  Now that it's all over I can't the laptop to connect to wireless internet.  I get the below error message:

  This computer does not have an installed and configured wireless network adapter...

  what Miss me?  some services to market?

  any suggestions would be greatly appreciated?

  Thank you!

  http://support.Dell.com/support/downloads/index.aspx

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• my home network disappears suddenly vista pc

  Vista7 2 Wireless has worked, then abandoned a download now wireless can see all networks, except me.  Uninstall and install the driver.  My wifi on other PC shows

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also refer to this article and check if it helps:

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• Cannot create an ad hoc network on Windows Vista

  Hi all

  I tried to create an ad hoc network on my PC but as soon as I get a name and a password, Windows returns the message "Windows cannot create the network"XXXX" I've not really changed anything since yesterday when I was able to create another network without problem, except a failed restart (to manually turn off my PC because restart took too long).

  I tried to change the Autoconfiguration WLAN service (as had been suggested at: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-create-an-ad-hoc-network/94028a00-54ec-4cd1-81a0-ab35718d62e5) but it is already configured in automatic mode, and it did not work.

  Any help would be greatly appreciated I need emergency back network!

  This info should help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-computer-to-computer-ad-hoc-network

• network unidentified Windows vista Home premium on acer laptop

  I'm trying to fix my brothers computer acer laptop at the moment to connect to the wifi in the House had a computer acer laptop running windows vista edition Home premium and all that it maintains on the wireless network is unidentified network and I tried the patches which are on youtube and none of them work so if anyone knows how to fix it please let me know as soon as possible I Thank you Neil

  Hi NeilBrookes,

  1. What is the brand and model of the network adapter?

  2 are you able to connect via the wired connection?

  3. have you made changes on your computer before this problem?

  4 have. what measures you tried to solve the problem?

  You can follow the steps in these links:

  Unidentified network: no internet access on wireless network

  Unable to connect using the connection Wi - Fi - unidentified network

  Hope the helps of information.

• Cannot locate the network after reinstalling Vista

  I just had to reinstall vista (based on the recommendation of the forum do how can I install/uninstall anything one way). Now I can't connect to the internet, or my network. I have a laptop Dell Inspiron 1525.

  It seems that I reinstalled the network adapter - at least when I started there was no category "network adapters" in the Device Manager, and now he has one with Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller under it.

  Thanks to a different compurter I downloaded the thing Dell told me to download when I typed in my Service tag.

  Also, I downloaded and installed the service packs 1 and 2 since for Vista, since I knew that they were on my orginal OS.

  In looking at the network and sharing Center, it seems that network discovery is turned off.  I tried to turn it on, but nothing happens.

  Any ideas on what to try next?

  In addition, I don't know if it's relevant or not, but when I reinstalled my OS, I thought everything would be gone, but the memory is always at the same level as it was before resettlement.

  Much obliged,

  Gregg

  Hello

  Did you follow the directions of Dell to reinstall Vista?

  You do not say if yoyu used their disks or you have used the recovery Partition to do.

  Here are two ways for you to read and see if it's what you were doing.

  Using the Dell recovery partition:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  Using the Dell disc:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  See you soon.

• Remove the old cable network name machine Vista

  I have 4 computers on a home network (2 portable wireless, Windows 7 and Vista) and 2 desktops (also Windows 7-Vista) to Windows 7 computers, replacing Vista computers in the near future.  Until them, I always use the four computers.

  I had a LOT of problems (unable to access printers and printers go offline) sharing printer and recently started having "Windows cannot access \\theWindows7newdesktopcomputer", those with printers attached - and I could / can not find a solution for this.  In desperation, I have reset the Linksys router e2500 manufactured back State initial and in the process gained a new network name (do not change).

  My problem is that the old Vista computer wired to the router insists on the use of the old network name (the one that appears on the screen of the network and sharing Center).  The funny thing is that I put on Jack autour with him (nothing has changed on the router) I have now access to the Internet on the old Vista computer wired to the router, even if she seems to be using the former name of network.  So, how can I get the Vista computer to recognize the new network name and quit using the former name of network.  I spent all day on this problem and I am not farther than I was when I started working on the problem of this morning on the printer share.  I guess that the router works because these two computers are connected to the router, but it doesn't look good for me and it seems that it must be something I can change or correct.

  Ron in round rock

  Try to remove from the network and sharing Center by clicking on the Home icon next to network name and go to mergere or delete network locations. I guess you know what to do after that.

  If it is used, then unplug your ethernet cable and try again.

• How can I network two Windows Vista computers to share files and printers?

  I have a PC connected directly (by wire) to a wireless router (which is connected to the modem/internet fine andworking) I also a PC connected to the wireless router, both computers connect to the internet just fine, how I'm going about setting up a home network to share files and printers. What kind should I I put in place and how.

  Hello

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 3 problem of dongle network after install Vista service pack 1 and 2

  I just installed the Vista SP1 and SP2... before my dongle 3 network worked well.

  Now when I turn on my computer and I put the dongle in a usb port 3 program is show: "No network", before the program 3 showed: "scanner... and after"ready the Connect".. » (SORRY FOR MY ENGLISH!) Mark someone understand me :)

  Now, I need to uninstall the 3Connectez program and after reinstall... now its working. But every day I need uninstall, install... and if possibble I want not to install, uninstall every day.  What is the problem?

  My computer is a Compaq Presario c700 (32 bit OS)

  Hello

  I suggest you download theZTE MF627 dongle drivers on the system and check if the problem is resolved.

   

  If this is not the case, unfortunately the drivers for ZTE MF112 are unavailable and you may need to contact 3 dongles for additional help. Click on the link below.

  http://www.three.co.UK/Help_Support/contact_us/

   

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.