Networks that overlap
I had a configuration of tunnel for this within the network 192.168.141.0/24 to access the remote network of 10.90.238.148/24 that was in place and functioning.
We had a few changes and added inside network 192.168.10.0/24 with the following statements from the road:
Route 10.0.0.0 K_Inc 255.192.0.0 192.168.10.252 1 (10.0.0.0 - 10.63.255.255)
Route K_Inc 10.64.0.0 255.224.0.0 192.168.10.252 1 (10.64.0.0 - 10.95.255.255)
Route K_Inc 10.100.100.0 255.255.255.0 192.168.10.252 1 (10.100.100.0 - 10.100.100.255)
Route K_Inc 10.128.0.0 255.128.0.0 192.168.10.252 1 (10.128.0.0 - 10.255.255.255)
There was another VPN tunnel with a remote network of 10.99.225.0/24, which explains in part why the routes have been dispersed.
10.90.238.148/24 is not respected
What are my options?
1 modify the 10.64.0.0/11 to a slash 12 route (as long as I have no local 10. addresses that will be affected)
2. pat dynamics...?
any thoughts?
Hello
If traffic destined to the 10.90.238.0/24 network which overlap reached the ASA at the present time, then probably you
crypto set reverse-road map
It would be a configuration line added to the VPN VPN in question L2L configuration that would generate automatically a static route to the ASA based on any remote network configured on the 'access list' which is used in the command
address for correspondence card crypto
If you have a network where one internal routers that have now been included a subnet that contains the remote network, then it would probably mean that traffic destined for the remote network would not reach the ASA at present.
In this case, you might want to try to set up a specific static route on the router for the remote network of 10.90.238.0/24 to the ASA gateway to a possible network connected on the router would not affect the operation of this network remotely.
Let know if I missed something with the specified configuration.
Hope this helps
-Jouni
Tags: Cisco Security
Similar Questions
-
[VPN Site-to-Site] Network that overlap
Hello
We have a Cisco ASA 9.1 and many VPN clients that work very well to this topic.
Now, he must connect to a partner with VPN Site to Site site.
We have a few problems:
- Duplication of IP address (we use 10.145.0.0/16 10.0.0.0/8 and partner use)
- Partner cannot use NAT on the router
What are the best solutions to configure the VPN Site to Site?
Thanks for your help,
Patrick
Hi Patrick,
Best option here is that you can specify the required subnets only in the field of /encryption cryptomap...
said in other 10.0.0.0/8 need access only a few subnets 10.1.0.0/24, 10.10.20.0/24... You can specify only in your crypto acl... Alternatively, you can use refuse instruction for the specific 10.145.0.0/16 crypto card but am not sure if this gives you the best result.
If you have the required access is mixed with several 10.x.x.x/8 instructions... then you can have the crypto ACL like sub areas of encryption... Here you jump only 10.145.0.0/16 of the subnet range...
10.0.0.0/9 to 10.145.0.0/16
10.128.0.0/12 to 10.145.0.0/16
10.146.0.0/15 to 10.145.0.0/16
10.148.0.0/14 to 10.145.0.0/16
10.152.0.0/13 to 10.145.0.0/16
10.160.0.0/11 to 10.145.0.0/1610.192.0.0/10 to 10.145.0.0/16
but make sure you have not all servers in 10.145.0.0/16 on your local network that the client requires access...
Link to have refuse to crypto ACL'; s
https://supportforums.Cisco.com/discussion/10909276/crypto-ACL-question
Concerning
Knockaert
-
Look on OS3 connects to a public wifi network, that has a connection to the Web page.
in the United Kingdom, we have a public wifi network called "_the cloud", which is free to use, but requires that you register for a free account.
Once signed, the phone will automatically connect when you are next in the range.
It seems that since the release of WatchOS3, the Apple Watch will connect now to this public WiFi even with the phone turned off or in flight mode. Suggesting it is connected to a Web page by its self.
It seems to me that it is only this a public wifi network that does this now, but can't figure out how!
Great news in any case, I hope that more public wifi networks completely agrees!
If someone else in the United Kingdom that uses 'cloud _L' public wifi could test this point too, that would be great. I hope that we could get an official comment from Apple?
https://support.Apple.com/en-GB/HT204562
Hello
Thanks for sharing this information.
Recognition wrote:
.. I hope that we could get an official comment from Apple?
It is a community based on the user. If you want to ask Apple about this behavior, contact UK options include:
-
Settings of records that overlap do not work
When I call my settings of the duplication of records, they are all "replace". I choose another option in the menus, but they do not. I can not any setting other than "replace". This is true for MIDI and Audio settings.
Everything else in the dialog box (boxes and count the settings seem to work well. Does anyone else have this problem? I tried to restart my computer and logic, without success. I'm running Logic Pro X 10.2.3 on an iMac 27 "mid-2011.
Any ideas? Really miss me my records to take.
OK, set it to 'Create a folder take' to create a folder to take.
Overlap simply writes a new region that overlaps exist areas, it does not have a folder to take.
-
A network that extends with AirPort Extreme is causing Internet failure.
A network that extends with AirPort Extreme is causing Internet failure. When I unplug the extreme internet works fine. What is the problem? The extreme old used to be the main, but I reset when I bought the new Time Capsule. Time Capsule is now the principal. We had extensive network in the House for over a year with no problems until I put the Capsule in the mixture. Why they arrive as well as the other?
Is AirPort Extreme 'extension' of the network by wireless connection to the Capsule of time... or... AirPort Extreme connects to time Capsule using an Ethernet cable connection?
-
Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)
kellycfromlosgatos wrote:
Try to set up my mini iPad and it won't let me choose a network that no backup is compatible with the version of iOS on iPad (9.1)
First talk you about selection of a network, and then say that there are no compatible backups. Do you have an older device? Having problems connecting to Wi - Fi, or restore a backup problems? If you had a device more former, is - it possible that this device had 9.2 on iOS? If Yes, then you will need configure the Mini iPad like new, update the iOS 9.1 to 9.2, and then you must use the settings > General > reset > erase all content and settings, to bring him back to the installation wizard. From there, you will be able to restore your previous backup.
-
Remove particles that overlap?
I'm looking for an effective way remove the my binary image that overlap.
Image 1 is the current seuillee image
Image 2 are the particles that are bad
Image 3 is the combination of image 1 and image 2
I want to remove particles that are 'overlap '.
Effective ideas?
Thank you
Branson
PS Images are in binary form, you must open in IMAQ to see.
Red = binary value 1
Green = binary value 2
Blue = binary value 3
Hello
I guess you try to do a binary reconstruction, have a look at the Reconstruction of binary morphology IMAQ: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_binarymorphology_reconstruction/
Stimulate the function with your 'bad image' as a brand.
Hope this helps
Concerning
-
Original title: trayapp
When I open the computer message appears, the component you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi' in the box below.
C:\Users\user\AppData\Local\Temp\7zS5216\setup\TrayApp\
When I click ok the message this way that c:\users\user\appdata\local\temp\7zs5216\setup\trayapp\ is not found. Verfy that you have access to this location and try again or try to find the 'TrayApp.msi' in installing a package file from which you can install the product'TrayApp.
When I try to cancel the warning message, is that an installation package for the TrayApp product is not found. Again the installation again using a valid copy of the 'TrayApp of installation' package. I already uninstalled all HP products, but this message is still bothering me, how to solve this problem?Hey Tama,
-What version of windows is installed on the computer?
-Have there been recent changes to the computer before the show?I recommend you go through the next HP document and check if it helps.Hope this information is useful. -
When I try to connect to my wireless network, that it asks a security key how do I find the key my router is a comtrend CT-5363
Hello
1. what operating system do you use?
2 did you change on your computer?
3. who is your internet service provider?
If you use windows7, I suggest you to follow the steps from the links and check out.
Set up a wireless router
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Set up a security key for a wireless network
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-security-key-for-a-wireless-network
-
Replace from the Clipboard, or "connect the wires that overlap?
I'll go by many of my first diagrams and clean code
with things I've learned since I started using Labview. A lot of this involves deleting
objects, then copy/paste of a conception of good reference in the old design. However,.
This often leaves a large number of broken wires to clean. For example, where I had individual
enumerations that are used in the design, I am replacing them with typedef enumerations.
(I couldn't typedef controls to appear in my palette of functions, but it is a question
for another post)
As it seems to be my only choice ' replace-> select a VI-> [file .llb]->-> [OK] typedef.
or remove the old one, paste a new, ctrl-B and rewire. This second option seems
to go faster than the first. But in both cases, there is a lot of click and drag to replace a
control, and there are dozens of them to do.
Therefore the routing of the wires is the same, but it takes time to connect them all back.
Is it possible to tell LV "re - connect the broken wires that overlap the pins."
overall or in a given area?
Or y at - it a way to simply "replace from the Clipboard?
Thank you and best regards,
-- J.
If you do a find > anyway, the dialog box that opens has a button replace. After selecting the replacement, one of the options is to replace all. This should save time if you have multiple copies of the original constants or controls made from the control.
Lynn
-
I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.
I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions. The request is not supported. All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.The procedure below: the problem: give perminiant solution pls1. delete the field and add the domain2 delete the user profile, and create user profile.Error:An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.Hello
I suggest you according to the question in this forum and check if that helps:
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
It will be useful.
-
Original title: Internet wireless connection
I use a PC & a cable modem wireless to connect to the Internet. When I start the computer, sometimes the icon in the taskbar indicates that it is connected to a network that is not identified. I wait a few minutes until what he says at last he is identified & seems to work very well. The only other issue I see is once in a while after it is connected, I noticed that it is to identify the network connection, but I see no problem to surf the web. This could be a looming problem with the modem, or is it something else? Should I consider it as my modem is still under warranty? ARRIS / Motorola wants to charge a diagnostic fee is why I write on this forum first.
Thank you
[Transferred from Internet Explorer]
Roll up your sleeves & cross your fingers...
ACTIONS:
[You can print these instructions for reference offline. DON'T SKIP ANY STEP! [If a step said to restart, restart!]
1. click right on the link following, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
1. right click on the following link, select SAVE TARGET as... & download the McAfee consumer products removal tool, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. right click on the file that you saved in step # 1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.
3B. right-click on the file that you saved in step # 1 b above and select run as administrator to run the McAfee utility. DO TAP not your keyboard until the race ends, then reboot again.
4. right-click on the following link and SAVE the download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]
Note: Good for IE9, too.
4B. right click on the file downloaded in # 4 above has (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop namedie8-rereg.
4 c. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 4 b above, double-click on the file ie8 - rereg.cmd to run the script and restart.
5 reaffirm Internet Explorer as the browser in the default CUSTOM (<>) Set Program Access and defaults of the computerarticle. [2]
6. reset Internet Explorer according to the instructions on this page: http://windows.microsoft.com/en-us/internet-explorer/reset-ie-settings
Note => for best results, check the option Remove personal settings .
7. open Internet Explorer (only!) to http://windows.microsoft.com/en-us/windows-vista/windows-update-error-8000ffff [ignore the title & symptoms].
8 b. ignorant of the "not recommended" or similar warnings, run the difficulty (50202 #) DEFAULT modes and AGGRESSIVE. [3]
9 restart once again & test.
10. in response to this post with a status report.
==================================================
[1] source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en[2] after that we ended up this thread, do not hesitate to reaffirm one of your other default browsers.
[3] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.
-
Network that connects to the unknown network will NOT cut
My computer automatically connects to an unknown network that does not appear on the available wireless networks. It does not disconnect and to log only when I turn off the wireless network. If I connect to another network, it disappears. I can't find any info through the help who can tell me how th shut down my computer to connect to this network. It's windows vista 32 bit
Try to remove all the networks listed there and restart.
Network discovery: WE (if you can see other computers)
All private network (Public's hotspots, airports, etc.)
What you set security on?
Rob - bicycle - Mark Twain said it is good. -
A computer on the network that is not seen by the other
I have a fairly standard home network: the 'main' computer, Vista, has the router connected to it; the second computer is a laptop, connected via the wireless network and running Windows 7. a printer that prints the laptop directly on the network (that is, do not use file & sharing from the main computer through a printer USB connection).
The problem is this: when I look at the main computer network, he does not see the laptop (he does not see the printer, either). Conversely, when I look at the network of the laptop, he sees everything. So if I want to copy a file to the master computer to Notepad, for example, I have to put the file in the Public of the main computer directory, go to Notepad and pull it. I can't write on directory Public of the laptop. Small problem, easily bypassed, but a problem however - especially when the main computer used to see the laptop, and I don't remember anything I've done.
When I looked at the properties of the C: drive of the computer laptop last night, he said "not shared" (how did that happen?), so I turned on sharing and takes the default value - which was the network path, \c \\Ernie-PC [computer name] [colon No.]. I was expecting the colon.
And time under "Network and sharing files folder" is said C:\ is shared, after "network path: \\Ernie-pc\c, ' the 'Share' button is grayed.
What are the things I need to check?
The steps described in these articles should help:
Sharing files and printers with different versions of Windows
Networking of computers running different Windows versions Boulder computer Maven
Most Microsoft Valuable Professional -
StackLayout works do not (children that overlap)
I'm trying to use the StackLayout in AIR BB10 application for the first time and things are not stacked.
Example code:
package { import flash.display.Sprite; import qnx.fuse.ui.dialog.AlertDialog; import qnx.fuse.ui.text.Label; import flash.events.Event; import qnx.fuse.ui.text.TextFormat; import qnx.fuse.ui.core.*; import qnx.fuse.ui.layouts.stackLayout.*; import qnx.fuse.ui.listClasses.*; [SWF(width="768", height="1280", backgroundColor="#000000", frameRate="60")] public class Example extends Sprite { private var label1:Label = new Label(); private var label2:Label = new Label(); public function Example() { try { init(); } catch(error:Error) { dialog("Error on Initialization", error.message); } } private function init():void { var container : Container = new Container(); container.setActualSize(stage.stageWidth, stage.stageHeight); container.scrollDirection = ScrollDirection.VERTICAL; var layout : StackLayout = new StackLayout(); layout.padding = 25; container.layout = layout; addChild(container); var myFormat:TextFormat = new qnx.fuse.ui.text.TextFormat(); myFormat.bold = true; myFormat.size = 50; myFormat.color = 0xFFFFFF; myFormat.font = "Slate Pro"; label1.text = "A"; label1.format = myFormat; label1.validateNow(); label1.height = label1.textHeight; label1.width = label1.textWidth; container.addChild(label1); label2.text = "B"; label2.format = myFormat; label2.validateNow(); label2.height = label2.textHeight; label2.width = label2.textWidth; container.addChild(label2); } private function debug(msg:String):void { dialog("Debug", msg); } private function dialog(title:String, msg:String):void { var alert:AlertDialog = new AlertDialog(); alert.title = title; alert.message = msg; alert.addButton("Ok"); alert.show(); } } }
The labels 'A' and 'B' overlap in the upper left corner.
"The
StackLayout
class organizes controls in a pile that overlap, where the stack is defined by the control hierarchy."Well, this explains why.
Why the Cascades StackLayout work go and AIR StackLayout work otherwise?
The Cascades class organizes things horizontally or vertically.
Sigh.
Maybe you are looking for
-
Incognito by white Tablet lists / black
I read that Firefox 20 will allow users to open tabs and private at the same time. That's cool! For example, I'd like to navigate through Facebook, Twitter and Gmail on some tabs and read information on the other tabs sites without talking to the old
-
Hello I use NI 9219 with model Honeywell scale 11. The problem is that the voltage for 9219 is 2, 7V while the calibrated for the load cell voltage is 5V. When I connect the two device, I always get the release of Labview, but how can I calibrate the
-
Original title: Netbook Licensing Can someone give me an answer to confirm if netbooks with Windows XP Home, Vista Home Edition, Windows 7 starter (these BONES other than professional or company) be used in a business, connected to the server environ
-
I have corrupted files as determined by SFC scan. How can I fix that SFC could not fix?
I used a (RegZooka) registry repair tool and must have damaged some files. At the time I discovered, RegZooka could not help me, but another suggested that I have run the System File Checker. I did and got a newspaper that shows some of the files t
-
How to display the text in the console with printf?
Purpose: Debug code CPP of cascade. Error: 'myMessageOutput' was not declared in this scope Question: How to declare the class Sub cascading ++? How do printf? Mini cod is on the bottom of Default empty project template#include #include#include#inclu