Network that connects to the unknown network will NOT cut
My computer automatically connects to an unknown network that does not appear on the available wireless networks. It does not disconnect and to log only when I turn off the wireless network. If I connect to another network, it disappears. I can't find any info through the help who can tell me how th shut down my computer to connect to this network. It's windows vista 32 bit
Try to remove all the networks listed there and restart.
Network discovery: WE (if you can see other computers)
All private network (Public's hotspots, airports, etc.)
What you set security on?
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
HP Envy 4500: Printer connected to the router, but will not print wireless Macbook
I want my wireless printer to work on my macbook, but I can't. I tried setting up on the HP utility to connect with the router as the mac and printer on but it does not work! It indicates that the download was successful, but the device was not reachable. I don't really know where to go from here and any help would be really appreciated. Thank you.
Hey @miriamnimmo,
Welcome to the Forums of HP, I would be happy to help you! I understand that you have the printer set up on your network, but the software says that the device is not accessible. Sometimes the IPv6 may interfere with the connection, and I suggest we disable that before anything else. On the fornt of the printer Panel, scroll down to and then select Wireless. In the wireless Menu, select Advanced settings, then IPv6 and.
Now we are going to let the router and unplug the power cable (NOTE: do not reset the router), then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.
Please let me know if this solves the problem by marking your post as solved (click on Accept as Solution button below). If the problem persists, let me know, I'll watch for your reply.
See you soon!
-
Hello.
I use a Toshiba laptop with Windows Vista Home Premium 64-bit.
I just have a modem and use a router. I have a network cable (cat 5) connected to my laptop and the modem. I have log-on internet and it connects. But when I open Google Chrome, IE9 or Firefox I can not load a web page. Google mentions something about the DNS cannot be found and DNS_Probe_Finished_No Internet.Frefox says server not found.
I click on the Menu start - Connect To - I am logged in. I already typed my password in the command prompt and appropriate the pppoe connection/address (I use ADSL).
I talked to my ISP and we tried to do certain things. But nothing works. On their end, it shows that I am connected. But I can't browse the internet. We tried to have the DNS and IP address for ipv4 set to obtain automatically and I put 2 numbers of DNS in manually once the settings have been changed to the favorite servers and DNS auxiliary, or worked.
Using command prompt, the DNS has been emptied. It did not help. The modem has been reset the ISP location. I also recreated and set up a new network connection.
My office is using the same pppoe information. I can freely browse the internet and I use Windows Vista Home Premium 32-bit. I was also shown to be connected simultaneously with both machines, but that the Office can go.
I do not have Windows Update the laptop since on April 2016. It has not been used and the battery was empty. I tried to turn off the laptop several times, but nothing works.
Y at - it suggestions to solve this problem? At that time perhaps a re - install will work.
System Restore worked. I will run the updates and see what happens.
I think it was a program that I uninstalled in programs and features.
It's also useful information for this post: https://answers.microsoft.com/en-us/windows/forum/windows_7-networking/unable-to-connect-internet-dns-error-windows-7/72040e27-7a87-4f6f-88d6-9d158da38de8
1.
Note
You must open a command with elevated privileges prompt to complete the following steps. For more information, see command prompt: frequently asked questions
Click the Start button.
In the search box, type command prompt.
In the list of results, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
At the command prompt, type ipconfig/flushdns.
2.
Start - Search programs and files
Type "Command Prompt".Right-click in the program file that appears above the run as administrator.
ipconfig/flushdns
ipconfig/registerdns
ipconfig/release
ipconfig / renew
-
Connect to the internet window will not appear.
When I I try to bring up the connection to the internet window either by the icons at the bottom of the screen or through my network menu, it won't come back. This makes it difficult for me to connect to networks or see what the networks are avialable. Someone help me please. Thank you
Hello
- What changes have been made on the computer before this problem?
- You are able to go online?
Looks like some system files on your computer is damaged. Try using the tool (SFC.exe) System File Checker to check and repair corrupt system files. To do this, follow these steps:
How to run scan SFC
1. click on the Start button
2. on the Start Menu, click all programs followed by accessories
3. in the menu accessories, right-click on command line option
4. in the drop-down menu that appears, click the "Run as Administrator" option
5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
6. in the command prompt window, type: sfc/scannow then press enter
7. a message is displayed to indicate that "the analysis of the system will start.
8. be patient because the analysis may take some time
9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
11 after the scan finished, close the command prompt window reboot the computer and check.
For more information, see the link below.
http://support.Microsoft.com/kb/936212
However, you can try to restore your computer to a point where you did not have this problem via a system restore.
You can try to restore your computer to a point where your computer didn't have this problem.
Feather system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Note: Before you start the system restore, save open files and close all programs. System Restore will restart your computer.
System Restore: frequently asked questions
http://windowshelp.Microsoft.com/Windows/en-us/help/517d3b8e-3379-46C1-B479-05b30d6fb3f01033.mspxLet us know if this helps
Concerning
Anthony. -
S3100 says it is connected to the Internet but will not play Netflix.
I read where everyone seems to have a problem that they can not connect to video services.
I think it's sad that an update makes your unusable. Never had a problem with my Panasonic TV boxes.
I don't really know how to make a network connection to the hand. Why are told that it is connected?
YOU MUST DO AN UPDATE TO FIX THIS!
Hi MichaelJohn and lhendricks,
Try to initialize the player requests by going to settings > reset > initialize personal information > OK, and then click on and select Internet videos then agree and on the following end user license agreement.
The issue only happens on Netflix, how about other apps?
Do you receive an error message?
If my post answered your question, please mark it as "accept as a Solution.
-
Download latest towers "connecting to the update server", will not download
I tried to download the latest version of Firefox for the last 5 days on different internet connections. He turns and hangs on "connecting to the update server". The download will not be completed. Can you please help? Thank you.
To install Firefox on a Mac, follow these steps:
- Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
- Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
- Delete Firefox in the Applications folder.
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
If the download is interrupted, check the reasons for it: if it's a low slow connection, it would be wise to seek a faster point to connect.
Please report back to see if this helped you!
-
It says attempts to connect to the server and will not download installation
It says trying to connect to the server and download any new installation
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.
http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html
or
A chat session where an agent can remotely look inside your computer can help
Cloud creative support chat (all creative cloud customer service problems)
-
SWF file that points to the FLV file will not play
Hello
I think there must be something on the side configuration server that prevents this...
You have an idea why this phenomenon happens? I have these two files identical cfm that point
in a swf flash on the site # 1 and # 2. The Flash animation plays in DreamWeaver.
He played locally on the server to test my pc and he plays on the #2 website but not on the #1 site.
Any recreated again, check paths even launch SWFs before downloading them and everything worked.
Once they are on the production server, the swf file does not load the file *.flv external Flash. I checked the permissions of
files and directory via a DosBox and all look good. Oh and I have the latest version of Flash installed plugin.
I'm puzzled!
Thanks Nickels55. Who did the trick.
Thanks for the feedback-Adobe Community Expert dan mode.
Dan
-
HP 20 Pavilion all-in-one: 4500 DESIRE CONNECTS to THE WIFI, BUT will not be PRINTED
Hello
I have problems printing from my PC.
I'm connected wireless and the PC can see the printer and recognizes that it is ready.
I'll then to print the document, including the States of PC is printing and printed, but nothing happens, no document is printed.
I have two portable mac I can print from without any problem at all, but not my HP PC family.
Help, please
Thank you
Running the diagnostics to http://www.hp.com/go/tools can help solve the problem.
-
Original title: PROBLEM WITH WINDOWS STORE
Hi, I'm a first year student at IIT MADRAS. I just got a new laptop (W8, 4 GB RAM, 320 to drive HARD, I3). I had problems to open the store. He said: "we were not able to connect to the store.this could not have come because of problem with the server or the network connection timed out." My connection to the local network requires the proxy settings. PLEASE HELP ME.
Hello
Yes, the speed and connectivity of the internet must be consistent for the applications to work properly.
I suggest you create a new user account and checkif the problem persists.
Create a new user account.
Setting up a new user account is a very easy process in Windows 8. There are two types of user accounts, a Microsoft user account and a Local user account. See this link for more information on the two types of user accounts and how to create them.
http://Windows.Microsoft.com/en-us/Windows-8/create-user-account
Try to connect with the user account that is having right of the administrator and check if the problem persists.
I hope this helps. If you have any other questions, please get back to us and we would be happy to help you.
-
How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.
Hello
- What version of Windows are you using?
You can check this link:
http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions
-
I updated Firefox on my Mac (10.6.8), and now the story is not known (that option is checked) and the back button will not work. Help?
One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.
- http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
- https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
You can also try to repair the database of places with this extension:
-
After that installation of 9.3 iPad will not activate, it has been restored, but still not turn on. The first owner does not know the password
And this is not recognitze by any device, computer or iPhone 6plus.
If you or the original owner did not have the password no one here or at Apple can help you.
-
SK2061: The wireless keyboard will not connect when the PC is turned on.
My problem is, when I start the PC, (HPK-15 500, 319NA), wireless (SK2061) keyboard, does not connect. I have to shut down the PC so he can connect (no restart, you must stop it). Have had the PC for 5 months and it has been published. Not changed the battery makes no difference.
The internet statement States I shoud push the blue button until the USB receiver flashes. This PC does not have an external USB receiver, I guess it's built in! The mouse works OK.
Hello @JimCar82,
I read your post on how the wireless keyboard will not connect when the computer is turned on, and I'd be happy to help you in this case!
Re-connect your keyboard to your desktop computer wireless, I advise you to follow the steps described in this document on the keyboard and wireless mouse troubleshooting. The USB receiver should be found at the back of the tower.
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
I have download an IDM software.there are as many files how can I understand that by running the file IDM will install in my computer and I can use it.
Hello
Contact the Support of IDM in this regard.
The link there is a Support tab on the top right > run the mouse cursor over them for the Support Options > 'how to use IDM.
http://www.internetdownloadmanager.com/download.html
See you soon.
Maybe you are looking for
-
Last week the audio part worked very well, NOT now! Apple, it's very annoying! I'm doing a new movie and I Pick what song I want. now I have what it takes to capture a piece of this one to put in the time line. easy right? NOT! I can only enter at th
-
Black output of assistant vision image
I use labview 8.6 and vision assistant 2009 to deal with the 640 * 480 RGB picture caputured by a qickcame of logitech. the problem is once the image through the express VI vision assistant the out put a 640 * 480 all black image! However controlled
-
The size of the base operating system Windows Vista on my Aspire 3680 2682 is larger than 20 GB, is this normal?
-
Is it possible to export or may a user profile on the same / PC system? I reinstalled Vista and kept profile admin during the time I've updated windows and installed programs. When I create now a standard profile I see that there are a lot of work if
-
"I have Win 7"Windows Fax and Scan " running on all my computers from client domian. Security for each user on the domain is configured to contain MS SBS 2003 Active Directory security group 'operators of Fax. Windows Fax and Scan starts and reads t