I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The request is not supported.   All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.
The procedure below: the problem: give perminiant solution pls
1. delete the field and add the domain
2 delete the user profile, and create user profile.
Error:
An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.

Hello

I suggest you according to the question in this forum and check if that helps:

http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

It will be useful.

Tags: Windows

Similar Questions

  • VMware Workstation on WINDOWS 2008 SERVER SP1

    Hello

    I try to install VM Workstation 8 on a new install own dev server based on Windows 2008 server SP1...

    To almost the end of the installation, it indicates an error of installation of package and he roll back anything!

    I tried the same thing with Workstation 7 and gor the same kind of error...

    So I can't install worksation for evaluation!

    KR,

    AB

    Hello

    Try right clicking the configuration file and selecting 'run as administrator '.

    Kind regards

    Ian

  • Windows 2008 server problem

    Windows 2008 Server starts providing DHCP itself after you enable the DNS suffix. How to stop the same?

    These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

    http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

    Thank you.      :)

    (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

  • Can I make a restore point in windows 2008 Server SP2

    I want to restore point in windows 2008 Server SP2

    Sanjay

    Thanks for visiting the site of the community of Microsoft Windows. The question you have posted is related to Windows Server 2008 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
     

  • Pavilion p7 - 1227c needs the network drivers that work with Windows 2008 server R2

    I bought this new Pavilion P7 - 1227C at Costco so that I can install Windows Server 2008 r2 with Hyper-V role

    I managed to install Windows 2008 server but unable to t the wireless or ethernet to work.  I tried to use the driver 64 bit Windows 7 without success.

    I think return Costco if I can't get the network driver that will work with Windows 2008 Server R2

    Thanks, in advance.

    Tour37

    Hi Paul,.

    Thanks for the link, I was able to download AR816X_V.0.14.15_WHQL.

    The driver works for Windows 2008 Server R2.  I just need to find the drivers for the wireless card.

    Best regards

    Round 37

  • Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

    Hello.

    I have a problem when you access files shared on a Windows 2008 Server 64 bits on a client computer to Windows 7. It takes a long time (up to a few minutes) to for example open a Word file from the network share. It is not always, but quite often.

    This also happens on two different servers client with almost the same equipment. Which is a basic IBM x 3400 with hard drives in RAID. I disabled the feature of unloading TCP/IP on the network inside the VM card.

    Someone has an answer for this? Have I missed something, a configuration perhaps? I'm totally lost here...

    Kind regards

    -Jean-

    Try this fix:

    http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 982860

    Enrico Giacomin

  • Windows 2008 server v2

    Hi all

    Can you help me with this? a windows logon has been deployed on my windows 2008 Server v2. and when I tried to log on to the server as admin, I get a message 'security policies on this computer are set to display information about the last interactive logon. Windows could not retrieve this information. Please contact your network administrator for assistance. Now, I can't log on to the server and everything I tried but to no avail. I can only log on locally as administrator on a client system if the virtual machine is stopped.

    Anyone can help the possible solution?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Windows 2008 Server R2 Std - issue of Best Practice Analyzer

    Windows 2008 Server R2 Std - question BPA
    I built a new Windows 2008 R2 Standard Server and configured as a domain controller. When you run the BPA I get the following error, which I can not solve:

    Question:
    The default domain controllers policy is not in force on the OR OR = Domain Controllers, DC = WRIGHT.
    Impact:
    If the Group Policy settings that are defined in the default domain controllers policy are not applied to domain controllers, Active Directory operations may fail.
    Resolution:
    Link the default domain controllers policy to the ORGANIZATION OR unit = Domain Controllers, DC = WRIGHT

    The default domain controllers policy is linked to the domain controllers OU. I dun dcdiag and the only failure is NCSecDesc but I don't plan to add an RODC to the forest. When I run the resulting strategy game I can see domain controller policy has been applied.
    Is there something I can do to clear this error message?

    Hello Lynn Furlong,

    Microsoft Communities is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. Your question deals with Windows 2008 Server R2, it would be better to post your question in the forums TechNet for ITPros.
    Click on the link here to transfer your question in the Forum Windows Server 2008 Group Policy. They will be better able to meet your group policy do not apply to domain controllers.

    Sincerely,

    Marilyn

  • Remote desktop disconnets after login Windows 2008 Server R2

    When I try to log on my windows 2008 server r2, it immediately disconnects with the following message remotely.

    Your Remote Session ended. The connection to the remote computer was lost due to network connectivity issues possible. Try to reconnect to the remote computer. If the problem persists, contact your network administrator. But the thing is I have other servers on the same network and I am able to connect remotely to them with all the problems. Please help me.

    FredAm

    Hello

    The question you posted would be better suited in thethe TechNet Forums. I would recommend posting your query in the TechNet Forums.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    Hope this information helps.

  • UM 1.2 and Windows 2008 - Server

    Hello

    It is possible to run UM with Windows 2008 Server? It is: he runns always CWLMS 3.2 and the customer wantes to add UM. The material is not the problem.

    Yes, UM 1.2 comes with 3.2 LMS that can be installed on a Windows 2008 Server.  You don't need to install all of the LMS 3.2 to get the BUZZ.  You can simply install common Services 3.3, Deputy of CiscoWorks, CiscoWorks portal, then UM.

  • VMware Workstation on Windows 2008 Server R2 9

    Can someone tell me if VMware Workstation 9 is supported running on Windows 2008 Server R2?

    And you cannot select your own criteria!

  • Export security settings local to a stand-alone Windows 2008 server in html format

    Can I know how much is possible to export the local security settings (including local policies, event log, models of administration) to a stand-alone Windows 2008 Server to a single file (for example, html or txt)?

    I know that "gpresult" can do, but it works only on member servers. Can we capture output similar to a server that is not joined to the domain?

    Thanks in advance.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *

  • error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

    I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

    I tried also with HP smartstart CD, but failed.

    Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

    Thank you...

  • see windows 2008 Server DHCP backp

    Need help planning the DHCP windows 2008 Server backup

    Support is located in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • How to set group policies in windows 2008 server for office plexi

    (1) define us group policy for wallpaper of Windows 2008 Server and pushed to all desktop computers.

    (2) but the desktop icons, we receive with blue background.

    (3) how to remove the blue background and make plexi icon.

    (4) I want to know what the Setup program needs to be done to get the icon of plexi in group policy in windows server 2008 standard.

    Hi valerie,

    The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

    http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx

Maybe you are looking for

  • Problem: Access to the database.

    Hello. I have a problem with my NI Multisim 12 (Student Edition). It installs correctly and correct registry also, but when I run the program it displays these messages "Problem: access to the database." The data are not available. Functions using th

  • Shift key + symbols displays the wrong key

    original title: the SHIFT key symbols That's why when I use the SHIFT key, is the symbol of evil come up, for example, E is supposed to be a question mark.  "what do I get when I want the key" to "."

  • Diagnostic says teredo tunneling pseudp report - interface. . Failed to start

    Original title: Please help I did said diagnosis report with my norton.it my pseudp teredo tunnel - interface. . cannot start (code 10) who do solve this problem?

  • MicrosoftOffice 2000

    My microsoft word has just stopped working.  The error message is the following: a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.  I uninstalled and then reinstalled the

  • Windows 7 - backup error code: 0 x 81000019

    How can I fix this prob.