Neural fuzzy systems

Similar Questions

• Fonts fuzzy system AT200 after upgrade to ICS

  Hi all

  After the upgrade? Gas station? 3.2 to 4.0 (ICS) fuzzy system fonts.
  This is particularly visible and annoying working with e-mail clients such as Google Mail or touchdown.

  After reading a few articles, I hoped a reset of the manufacturer can help. He didn? t.
  Replacement of the system by a commercial font (e.g. Monotype) didn't font? t cure the problem either.

  Does anyone have similar problems with the AT200 after upgrade to ICS?
  Toshiba offers a kind of patch to get rid of the problem?

  Best regards
  ElVo

  Hello

  One of my friends to do an update Android ICS but fonts seems good.
  Have you tried to reset the AT200 once more by default?
  Recommend doing this

  Also start once more the gas station because I think that there is another system update not quite sure what version it is, but it should be mentioned by service station.

• fuzzy logic programming

  I'm using labview for the fault diagnosis, where the entrance would be numerical values such as temperature or vibration and after defuzzification reading, I want the output to a particular type of fault example imbalance of the tree or fuel pump faulty.

  Now the labview after defuzzification gives me a numeric value, how I use fuzzy logic labview control & simulation when the input is digital and outside is a qualitative anomaly, a undetermined?

  Thank you

  Aliraja,

  You can use fuzzy logic tool to deal with the digital inputs and determine what should be set out.  However, the production value will always be numeric.  The key element that you seem to be interested would find whatever the numerical value represents.  While I can't give you a precise way to configure this system in itself, something you might look to do would go on the tutorial of fuzzy logic listed in Chapter 9 of the

  LabVIEW PID and user manual for the fuzzy logic Toolbox.  This document can be found here:

  LabVIEW PID and user manual for the fuzzy logic Toolbox

  How fuzzy logic, basically, is that it defines an actionable items and system settings to determine how the entries on the output of a system.  He did this to simply classify the entries in specific categories (which are numerically specified) and the output, then a different category, which is just another representation of a numerical range.  Because the output is going to be digital, I would focus on which values represent different vulnerabilities on your application and then write in a LabVIEW logical basis to determine what is actually happening.  Once the system is set up (best done through fuzzy System Designer), this shouldn't be too difficult.  Implementation of the system will be the most difficult part and will depend on how you want to configure the inputs and outputs.

  Please look over the attached tutorial, which should explain if all goes well in-depth how to effectively use the Toolbox.

  Kind regards

  Keith M.

  Technical sales engineer

• New graphics from the portable - Windows 10 - Toshiba fuzzy

  HI -.

  Just got a new PC Toshiba laptop. Operating system Windows 10. All images are fuzzy/blurry in Firefox (version 40.0.2), text is fine.

  In Internet Explorer and browsers Microsoft new Edge, the graphics are perfect.

  East 40.0.2 w/Windows compatible 10? Firefox is my browser by default, hate to use IE or Edge,

  Thanks for any idea,

  Anne

  Check this box:

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

  Questions have been previously linked to the extension of McAfee Site Advisor.
  Try to disable it and see if the problem persists.

  http://service.McAfee.com/faqdocument.aspx?ID=TS100162
  How to uninstall SiteAdvisor

  To disable:
  Type "subject: addons" in the address bar
  Find the extension and click on the button 'disable '.

• Fuzzy text and icons, pages zoomed

  Hi, I have recently updated to version 22.0. Now everytime I open a new Web site, it starts with zoom and more than it was in previous versions, causing the text/icons/images to become blurry, how to restore the zoom level or set a zoom of coverage for all sites/pages?
  Also, all the icons and boxes/tool bars are "fuzzy" but not the text on them, I have a 1920 x 1080, but have not encountered this problem with another program or version of Firefox so far. How can I stop them appearing blurry?
  I hope that was clear, thank you for the help

  Hello, firefox 22 is now about the density of pixels you have upgraded to system in Control Panel > appearance > display. more information about this is available at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller

  If you want to set the text size/pixel density in firefox is different that your system settings as it has been addressed in previous versions, enter about: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named layout.css.devPixelsPerPx. Double-click it and change its value to 1.0 (or any zoom factor that suits your needs; -1.0 is the default and will respect the parameters of the system).

• Qosmio G30-176: Question of TV tunner - fuzzy without all the sounds

  I of seychelles and we use a system similar to that of the United Kingdom Pal, but I can not set the TV Tuner.
  He released still fuzzy with no sound.
  Can someone please help?

  Hello

  As far as I know that the TV Tuner is specific to the country in which the notebook is purchased.
  This is evident in the case of the PAL (European standard) versus NTSC (North American standard), but also includes deviations to the PAL standard that can be found in all of these countries that use it for their television shows.

  The Microsoft Windows Edition Media Center operating system is only configured for use in the country in which the laptop was purchased.
  This configuration corresponds to functions such as obtaining the electronic Program Guide through the Internet.

  Eventually the PAL system is similar to the one United Kingdom, but it is NOT the same.
  This cold be a reason for TV channels scrambled without noise.

• Satellite A200-1QZ - view suddenly becames fuzzy and a little green

  Hello

  Excuse my bad English, but I have a problem with my 2 month old Satellite A200 - 1QZ Notebook.

  Sometimes, about 2 times a week, my screen get is fuzzy (there looks like the color depth would change to 16-bit or less) and I can see a small green tint (but here? not sure m) on the entire screen.
  I do not understand why, because sometimes during games, chat, write in word or something else, so no matter what I do.

  Currently AI? using m for laptops modified Desktop Driver Catalyst 08.2 (the driver is original, but I have a tool called 'Mobility DotNET4', I modified with.

  I don't think that the updated driver is the reason for my problem, because I remember of the day, I used the notebook for the first time and 1 hour later, I got it too. And now, the certified Toshiba display driver has been installed.

  I solve the problem with the restart of the system, but it is very uncomfortable during the games or chatting.

  I hope that my text is understandable...

  Help, I would be very grateful.

  Welcome MatthiasV

  Hello

  Eventually he s a graphics card problem, it is possible if the 3rd party graphics card driver has been installed.
  The graphic drivers from Toshiba support thermal protection which is needed to prevent overheating of the material!

  If you have used a non-Toshiba driver then a GPU could overheat and therefore this issue happened.

  However, for me, it looks like a hardware problem and therefore the laptop must be checked by a service provider authorized in your country!

  Good bye

• lack of LabVIEW MathScript commands for control systems

  I look at these:

  • https://www.YouTube.com/watch?v=sbUqlhpaHoU (2007)
  • https://www.YouTube.com/watch?v=PfCcB8hodv8 (2013)

  It comes with LabVIEW control system engineering.

  I have 2015 LabVIEW MathScript RT and a trial license for the library control and Simulation.  I also installed MatLab license, but it doesn't have the toolboxes of the control system.

  They both use the command 'SS' in MathScript.  I can't find.  I get errors.  I am looking for help and he's not here.  It is not in the examples.  When I look at the block schema of VI of the video HAS I have fewer controls on mine.  I get the PID, fuzzy and System Identification.  I do not have "SISO.

  I have several assumptions about what is wrong:

  • It has been removed from the MathScript RT module.
  • I need a package of different tools or demo.
  • It has a new name that is not intuitive.

  You can help me find the "ss" command so I can reproduce what they do?

  You have installed the wrong version of the Control Design and Simulation module - version must match the version of LabVIEW (i.e. 2015, in your case).

  Download/install the older version and you should be good to go.

• Where to find the replacement physical disk system restore?

  Good so I had an old model Notebook/Tablet PC and tried Windows 8 on it, since Win8 is really Intense App and defined for the type touch screen interface and all that.

  Well well... fingerprint reader and many other things simply does not work. Tried all workarounds that I could as well and it is just a no-go.  So I thought "hey Let's use this fancy restore disc".

  Well... to restart the PC, press F11 and... nothing happens. It starts normally just.

  So I'm in the bios and extend the deadline, thinking it didn't catch and then try again... and again... and again...

  No luck... Curious, I opened the D: / and there is only 1 file seen...

  & drvmig & 1 KB of size...

  But the D: / said he consumes more than 40 MB... as well as of... very unusual.

  Since I have not implemented a Dual Boot of Windows Vista/Windows 8...   I'm stuck on 8, with a system non-working for the most part.  Even the wifi has problems. (Had to wait and go home on the desk to write this)

  In any case... to sum up the story... I tried to find the disc "restore your system" paper with what he was referring to-because the Discless option apparently is a No Go (unless maybe someone else has something to try?)

  The book says that I can order a replacement disc blah blah.  I know it's a few years old and everything - but the discs have got to be always around.  I must have my fully functional Wacom drivers - as well as the fingerprint reader (which seems to want to not install at all - even after several tries).

  EDIT:.

  Tried anyway - it did nothing. It starts as if I had not changed a thing.

  It does not appear that there is a command option or HP support is terrible, worse then I had ever imagined.  They should be ashamed of themselves for cutting so many corners.

  The Tablet I bought is a known defective system.  Its design has many flaws that cause its failure usually in 1 year and 2 months of use.  Sometimes sooner, given the climates.

  HP has refused to make public something known and refused to give him a recall notice - instead they keep blaming it on other things and never get the problem resolved.

  I've been waiting 4 years after the last models were made - they would at least recognize this problem - at least a cup up to her.   This is not the case.

  I fell on the Support forums to see if my problem can be corrected.  HP apparently cares not at all.

  I will turn to illegal means to fix my problem - because HP don't care my system in any way, as well as take the chance - every chance I get - to warn everyone interested in a HP buy simply do not place.     We will go to Dell or Toshiba according to our needs.

  HP should certainly be stopped.   Bad, bad product support and skirting around the fingers solutions then don't be directed to them for making a mistake.

  Mistakes happen, HP.    What makes other companies so good compared to you - is that they cut up to the mistakes and try to do better for those made by them.  This does not mean giving millions of dollars - away simply stating "we messed up, but here is how you can solve the problem once and for all"-are all that is needed.

  In my Tablet model, there is a kind of "carpet" fuzzy on one of the chain and the GPU has a thick heat cushion plugging on the radiator.  Here's the first problems.     Replace the thermal pad with a pure thickness 1.2 mm or 1 mm copper plate and use a few good thermal grease such as arctic silver 5 on both of its sides.  If you really want to guarantee employment some silicone high temperature apply sealant on the edges is like a framework so it it adheres in place and won't slip.  Replace the carpet with new grease as well, and your connections on the radiator must be perfect.

  Lower temperatures up to 30 ° C.   Given that the system has been called to hit more frequently - 100 c and damage irreverseable - drop 30 c is a great victory.

  I want you to keep in mind this "difficulty" requires almost no computer knowledge, around $8 in supplies to buy everything that (with shipping and handling and inflated ebay prices) and less than an hour of work to do.

  So why, exactly, could not HP fix their own models of 4 years ago?  It was just the thermal pads, they used! They remove not enough heat, and indeed cuased heat build up on top of the CPU and GPU!  Copper to copper authorized connection heat flow upward and out of the system as it was proposed and solved overheating once and for all!

  Microsoft has had a similar problem with their origins Xbox360, the RROD.  The problem of heating has been fixed by - you guessed it - fix the spacing between the GPU and the CPU contact for heat sinks.  It's another fix ' 1 mm '.

  Of course, quality control slipped in both cases - but Microsoft rumbles again because they have replaced hard defective systems (sometimes with new systems depending on where you did) and said: "we are sorry".

  However, HP has no.  This is why you are unable to HP. This is why people are upset.  If it was not a problem - we wouldn't be find ways to modify systems to correct.  But when even... you won't admit there are problems you too looked in the manufacturing industry.

  Admit that you made a mistake.   At this time (4 years after the model has been released) nobody is going to care much if they can't get replacements.  That is what Ebay is for.  You won't have the money. You just do what you have had to do the whole time - that will HELP your customers stay loyal.

  HPs new motto should be ' go cheap and don't care, we do it. "

• Expanded display fuzzy icons, text & web pages

  I have problems with my laptop and my desktop view expanded my fonts go fuzzy? I tried to change the screen resolution and font size in Control Panel. But nothing seems to work. None of the resolutions screen fit properly on the screen? I am running Windows XP. I did a system restore and that solved the problem until I stopped him. When I turned on the next day the problem returns. could this be a problem with the graphics drivers?

  any help would be appreciated

  It is the Vista forum.

  Please repost to the XP, office and customization section forum:
  http://social.answers.Microsoft.com/forums/en-us/xpdesktop/threads For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• recovery system option - not found any operating system, load drivers

  Hi, Im new here ^^ I am here to ask a question, he made me feel confused. I bought a laptop last year, which is (Acer Aspire 4930 G). Today morning when I turn on my laptop, it showed me all of a sudden

  PXE - 61 - test Media Failed
  No bootable devices - insert the boot CD and press a key

  I made impossible the network startup and test media is fixed. After that, I started using VISTA HOME PREMIUM recover CD and tried to fix my computer, but it seems to do the job.  These are the problems that I met

  1. once I click on "Repair my computer", it pop up a "system recovery option" forms but the operating system has not appeared and he asked me to load the drivers (not sure it takes load 1)

  2. If I continue without the operating system and I clicked on the "Startup Repair", it shows me that "cannot automatically repair withouth', is m felt confused.

  3. If I click on the "System Restore", it doesn't seem to work too.

  May I ask... How can I recover / find my operating system? and how can I solved the problem I've met? Is to make fuzzy m

  Recovey process Acer is normally a complete reinstall back to the factory settings: how you bought.

  http://support.Acer.com/

  For all questions/issues with Acer Recovery Media, contact Acer at the link above.

  It's Recovery process Acer, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Printing [HP Deskjet F2480]: Letters at the end of sentences are weak/fuzzy.

  The printer prints, but the letters at the end of sentences (it is literally the end of the phrases, not near the right margin) are weak/fuzzy.  Cartridge has recently been replaced by the dealer.

  System: Windows 7-32 bit

  It is usually caused by the printer being out of alignment, or because the need cleaned ink cartridges. The document below should help you to work on the problem. If the steps that do not work, replace the cartridges. If the problem persists, you will need to replace the printer.

  http://goo.GL/6GCRE

• the text or the image sometimes 'break up' in a State of fuzzy, illegible

  original title: fuzzy text or image

  Since I installed Windows 7, the text or the image sometimes 'break' in a blurry, unreadable state.  It happens in Word and other programs. It seems to be no reason for when it will occur, but lately it often happens when I play Solitaire. Sometimes the screen alternately clear, blur, lighten, etc..

  Hi threadsmith

   

  Method 1:

  You can use the hardware and troubleshooting of devices and also the display resolution of quality issues. Check if this can help to solve problems -

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  
  See below the link assistance and control-

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

   

  Method 2:

  Step 1 :
  To resolve the problem, you can check if uninstalling and reinstalling then the display driver allows.
  Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  After the computer restarts, the drivers will be installed automatically.
  
  Step 2:

  If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

  You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Password blackBerry Smartphones without system for Desktop Installation

  When I upgraded my PC, I did use no password (Enter) to the operating system (Windows XP + 3). Now, you ask for one. Yes, I'm an admin, but Windows is fuzzy on all that for a simple user like me.

  How to install this Desktop Application so I can use my Blackberry 7780?

  When I get to the shape and punch in the entry, I get an error window asking for the password.

  I suspect it's quite common.

  Why do you need this?

  AND

  I cannot now make telephone calls and suspect that no Office is the reason.

  I have Microsoft Outlook installed to ActiveSync for my HP iPAQ X 11-21204 but do not want to use it for fear of software conflicts.

  Help me. Please

  BI ~.

  Thank you very much. It seems to have everything I do (do what I have to do).

  It's all about servers and the type of service I have my sales service. (ATT)? > Well, duh

  But a person is good only once, a beginner?

  Congratulations and lots of fun Holloweenie.

  Someone give this person a raise! Really!

  And thanks for your patience.

  Boz

• When I play itunes and then play youtube... my sound goes all funny and fuzzy and slow down the movements of the computer? Any ideas?

  When I play itunes and then run youtube... my computer starts to gltch and slow down. Ditto for when I play a game it glitches and slows down every 30 seconds and gets really fuzzy... does anyone know the cause of this?

  Hi Judsonp14,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  Method 1: You can follow the steps mentioned in the link below

  What can I do on the audio problems, such as popping, crackling, or sound that plays too fast or too slowly?

  Method 2: Let flow the fixit available in the link below and then check

  Playing video files crashes or blocking Internet Explorer or Windows

  http://support.Microsoft.com/mats/video_freezes_or_crashes/en-us

  Method 3: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833