New analysis of data warehouses... at the level of the Cluster with PowerCLI 5?

Similar Questions

• Can you pass offline virtual machines between data warehouses using the 'Migration' with the basic Kit Essentials feature?

  I speak not of Essentials Plus vMotion between hosts or migration of VMS between hosts and data warehouses online. Just curious to know if its possible to off a virtual machine and click the button to migrate to another store of data with the basic Essentials bundle.

  Welcome to the community - Yes you can - it's what we call a cold migration.

• Cannot see reverse data warehouses in the model

  Hi all
  
  I am trying to reverse both PeopleSoft custom defined in an Oracle database tables and bring them to ODI.
  However, even if the reversal of the process itself (standard and custom) doesn't give any errors, I can't see the data stores in the model.
  
  I connect to the Oracle database using a user id that is not sysadm. This user had only read access to the two tables and sys.dba_objects (initially, while doing a reversal on measure, it was an error which I understand that sys.dba_objects need to access) above.
  I am able to query and read data from tables using sql developer using this new user.
  
  I believe also that the topology has been set up properly and I could do a ping of the database by using the user successfully when you set the physical schema.
  
  Advice as to why I can't see data warehouses in the model even after the overwhelming success?
  Help any will be appreciated.
  
  Thanks in advance,
  Vivek

  Yes,

  The latter request must show any xxxx of the user table, and he did not.

  Take a look if the objects you need to reverse are not synonymous. If that's true, if they are public or private and the true owner of the table referenced by the synonym...

  Cezar Santos
  http://odiexperts.com

• Issue of SDRS to vCloud Director after you add the new data store to the Cluster of DTS

  Hi people,

  We use vCloud Director 5.5 in a vSphere full 5.5 environment.

  We have several DTS Cluster in vSphere and connected to vCloud Director.

  Following problem.

  When I add a data store to a Cluster of DTS and connect this to the corresponding storage profile data store, the storage profile is not available to vCloud Director more.

  After removing the new store data in the cluster of DTS, the profile becomes available again.

  Any ideas?

  Concerning

  Jean

  How did you the storage profile associated with the data store?  via c# client or vSphere web client?

  If you did the wrong way (c#) there no storage class label appropriate against it.

  A data cluster store has the storage class who would have all preparations of data contained inside.

  I think that you should check the service class is associated properly in vSphere web client (before adding to the DS Cluster).  Once it displays correctly, and then add the data store to the cluster.

• HA will only work if I share NFS data store in the cluster

  Hi all

  Please help me with my question below?

  HA work if I share NFS data store in the cluster? Even if if works is it advisable?

  Thank you

  Lucette

  Yes, but a VM restarts on a host within the same cluster VMware only.

• How to create the new catalog, categories and products within the ACC with the CCI

  Hi all
  
  I'm new to atg, I just want to create a new catalog, categories and products within the ACC with a BCC (publishing server) and then I have to browse through my jsp application.for added this requirement what configuration I need to do with VAC. Please help me on this ASAP.
  
  Kind regards
  Jyothi.MJ

  There is nothing you need to do for this.
  Go to ACC and create a catalog.

  In the JSP using droplets CategoryLookUp get the properties of the category and its products of the child to display.

  Peace
  Shaik

• How to build a new virtual machine based on cluster with powercli?

  When you create a new virtual machine on cluster in the user interface, you cannot select the host, it is decided by the cluster.

  Now, I want to create a new vm on cluster by powerCli. I have not found any parameter to specify the cluster.

  Only the "$vmhost" to specify the host.

  Why are they so different?

  Can someone help me understand it and how to create a new VM on cluster?

  Thank you in advance!

  Hello, bob1118-

  While, as you said, it has non - Cluster parameter to the cmdlet New - VM, you _can_ effectively specify the cluster at new time of creation of VM via PowerCLI: you specify the list of resources within the desired cluster.  So a partial New - VM call would look like:

  New-VM -Name myNewVM0 -ResourcePool (Get-Cluster myDestinationCluster | Get-ResourcePool -Name "Resources") -Template ...
  

  Who uses the resource pool default "Resources" that exists in a cluster.  And, you could fill in the rest of the parameters relevant to the new virtual machine of your desires.  How do I?

• Collection of data warehouses in the Script of commissioning

  Hi all

  First of all, I want to say thank you for all the help provided in these communities.  It has been very valuable in recent years.

  I had the opportunity to work on a configuration script treated for over a week now and have got almost ready for release but got stuck on the type of a basic element - collection of data warehouses.

  The idea is that we can use this to launch several environments identical demand - ripe for automation!

  We get the number of machines required is in $clcount, and $dslist can be equal to something like this...

  Name	FreeSpaceGB	CapacityGB
  SAN-ds-3	3,399.11	5,119.75
  SAN-ds-4	1,275.26	5,119.75
  SAN-ds-2	661.813	5,119.75
  SAN-ds-5	292.342	5,119.75
  SAN-ds-8	273.204	5,119.75

  My method works as long as the number of machines is less than the number of available data warehouses, but fails if the number of machines exceeds available data warehouses.

  $resources = Get-Cluster "Compute 1"
  $OSSpec = Get-OSCustomizationSpec "Base 2012 R2"
  $dslist = get-datastore | where {$_.Name -match "SAN" -and $_.FreeSpaceGB -gt 200} | Sort FreeSpaceGB -Descending
  $folder = Get-Folder "Lab 2"
  $clcount = "17"
  $envn = "Lab2-"
  $OSSpec = $OSSpec | New-OSCustomizationSpec -Name Temp-Spec -Type NonPersistent -Confirm:$false
  foreach ($num in 1..$clcount){
      $suffix = "{0:D2}" -f $num
      $datastore = $dslist[$num-1]
      $OSSpec = $OSSpec | Set-OSCustomizationSpec -NamingScheme fixed -NamingPrefix "APPCL$suffix"
      New-VM -Name $envn"APPCL"$suffix -Template $template -OSCustomizationSpec $OSSpec -Location $folder -ResourcePool $resources -Datastore $datastore
  }
  ##End build Client Machines
  $OSSpec | Remove-OSCustomizationSpec -Confirm:$false
  
  

  I know it would be easy to solve with the clusters and SDR data store, but I believe that would always choose the store of data with the most free space and you can see our environment could be a little unbalanced, so I am trying to build in a little more intelligence in the distribution of these machines in data warehouses.

  Any help or pointers in the right direction would be greatly appreciated!
  

  Use % (remainder of division) to transform $num into something that will be less than the size of option:

  $datastore = $dslist [$num % $dslist.count]

  Then change the ascending sort.

• PowerCLI script for DatastoreCluster, data warehouses and the size info, DataCenter, Clusters

  Hello - I am looking to remove the DatastoreClusters and then list data warehouses as well with their size (total size, used space, free space, put in service, uncommitted space) and the total number of virtual machines on this data store. I would also like to understand what data center and they are on clusters. Is this possible? I might want to limit what is displayed in data warehouses that are 13 percent of free space or less.

  Thank you

  LORRI

  Of course, try this way

  Get-Datastore.

  Select @{N = 'Center'; E={$_. Datacenter.Name}},

  @{N = "DSC"; E = {Get-DatastoreCluster - Datastore $_______ |} {{Select - ExpandProperty name}}.

  Name,CapacityGB,@{N='FreespaceGB'; E = {[math]: tour ($_.)} (FreespaceGB, 2)}},

  @{N = "ProvisionedSpaceGB"; E = {}

  [math]: Round (($_.)) ExtensionData.Summary.Capacity - $_. Extensiondata.Summary.FreeSpace + $_. ExtensionData.Summary.Uncommitted)/1GB,2)}}.

  @{N = "UnCommittedGB"; E = {[math]: tour ($_.)} ExtensionData.Summary.Uncommitted/1GB,2)}}.

  @{N = "VM"; E={$_. ExtensionData.VM.Count}} |

  Export Csv report.csv - NoTypeInformation - UseCulture

• Storage vmotion, between data warehouses when the block size is different

  Hi all

  I would like to know, is it possible to do a vmotion of storage between two data warehouses, when they have different block sizes. The case is as a former vmfs data store 3 which has been upgraded direct to vmfs5 there, but since it has been updated it maintains its own block size. While the newly created vmfs datastore 5 a block size of 1 MB.

  Thus, storage Vmotion will work in this case? It will fail OR will be with degraded performance?

  Finally, storage vmotion is possible even if you do not have a cluster DRS for storage?

  Thank you

  Yes you can!

  Check some info on the effects of block size: http://www.yellow-bricks.com/2011/02/18/blocksize-impact/

• Movement of data warehouses from the local storage to SAN virtual computer

  Hello

  I have a few VMs that must be moved on our SAN, they are on an ESX 3.5 stand-alone server.

  It seems that the best way to proceed would be to:

  1. turn off the VMs system.

  2. copy and paste all of their files on the SAN data store configuration.

  3. right click on the vmx files, add them to the ESX cluster.

  4. create a new ID when asked.

  5. turn on them and let it run.

  Am I missing tips here? In this way, I still have the original VMs back if something breaks down - they will have a new ID created and if all goes wrong, I can just stop them and the power on the 'old'.

  Any help/advice appreciated as (as always) here are important to keep servers to work correctly!

  rudybrewster wrote:

  Thnaks for the answers, I'll flat some points a bit.

  The reason why I want to do with a copy/paste is to keep the original files intact, if I vMotion them, I won't have the originals are I'm going?

  Stand alone ESX server is a different model, etc. to the cluster, so I don't think I can add in?

  Bascially, I need to be 100% sure that I can get these servers if something happens on copy - and I have thin, that my method is what?

  Yes, when you svMotion them, you can move them.

  You can add any model of a server to a cluster. What might not work is vMotion one guest from one host to another if the CPU do not match.

  If you want to keep the original files, copy them.

  AWo

• How to get the ID of a single data centre and the Cluster

  Hello

  We have a product we need get the detail of data centers, Clusters, the Esx host and all Virtual Machines of a Virtual Center. And keep it in sync with the VCenter. I use a thread that queries the VCenter every 5 minutes and retrieves the data.

  We use Java VI SDK 4.0 for this.

  At the present time I am able to read all the details using PropertyCollector. But once a data center is renowned for my application, it is similar to a fact that a data center with the old name has been deleted and a data center with the new name has been added. For this reason, when data center is renamed, I remove entities for the former my application Esx host and adding new features to the ESX hosts in new data center. It causes a lot of unwanted things.

  So, I want to go get some unique Id of the dataCenter and Cluster, so that when a cluster/datacenter is renamed, uniqueId is always the same and my app will be able to know that it is just a change of name. And entities for ESX/VirtualMachine will be kept.

  Please, help me to know the unique id of the cluster/datacenter.

  Thank you

  Deepak

  Yes, there are supposed to be unique UUID generated by vCenter or ESX (i) and if you have not manually mux with values. The UUID is guaranteed to be unique within a given instance of vCenter.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• date fill in the dimension with the correct values

  Hi all
  
  I have a 'simple' problem, but can't get it resolved! The calculations of the CDA in the cube not 'reset' at the right moment in time (they should 'reset' on the exercise, but it actually seems to happen on the normal calendar year).
  
  Our dimensions and cubes are MOLAP. There is a relational table that contains columns with values for both a calendar hierarchy as well as a hierarchy of exercise. This table tells the date dimension (only the tax hierarchy as MOLAP, we have just a fiscal hierarchy). The result seems correct in the data viewer.
  
  The cube is filled with both relational sources. A perspective provides the measurement values and CODE (distinctive signs of business) values for each dimension involved. In the case of the date dimension, it provides the code for the involved level value in which we cube (months).
  
  I made a very simple testcase with only 1 dimension (date) and 1 small cube. The cube uses only the dimesion of date (to load the cube on the fiscal hierarchy at the month level) and has 1 base measure that is loaded with a simple number and 1 calculated measure that calculates the value of the CDA for this basic measure. The calculated measure is added to the cube designer OWB by using the button 'generate calculated measures' and choosing the function 'Year to Date'.
  
  When complete the cube and using the data viewer to verify the results, CDA values don't 'reset' at the end of the year. They seem to reset at the end of the normal calendar year!
  After some tests, I have concluded that this has to do with the values I provide to fill the date dimension, but I can't figure out what should be the change, and I can't find examples anywhere.
  
  Someone out there a calculation for a YEAR of work in MOLAP?
  
  Any help much appreciated.
  Kind regards
  Ed
  

  Hi Ed

  It can be an inherent behavior of the time dimension in the AWs where the CDA on financial is not supported out of the box, see the OLAP thread below. Have you tried just build your simple case in AWM recreate? If you can get around using a custom expression, you should be able to define this custom OWB and still keep the design you have.

  Calculated against calendar CDA CDA tax measure

  See you soon
  David

• Initialize the cluster with data types different (lots of data)

  Hello

  I have data, which are composed of different data types. First of all, I have initialize cluster with these types of data and then "print" to light (photo). In case of photo data carries 8 characters than ja 4 floats. It was easy to initialize, but here's the question: How can I do this even if I have data that look like this (interpreter):

  floating point number

  name char [32]

  Short value [16]

  What I create loooong cluster which have a fleet of 32 characters, 16 short films? Or I can create these 'paintings' in a different way?

  THX once again

  -Aa-

  I suggest using the table-cluster and configuration of the cluster size to match the size of your berries, then package these groups together.  In terms of storage of LabVIEW, there is no difference between a group of

  floating point number

  Name1 tank

  name2 tank

  ...

  short value1

  short value2

  ...

  and a bunch of

  floating point number

  -> cluster shipped from

  Name1 tank

  name2 tank

  ...

  -> cluster shipped from

  short value1

  short value2

  So you can use the cluster table to get the right sizes rather than individually create all these values in a single giant cluster.

• Change the database with PowerCLI retention policy

  Anyone know if you can change the settings for retention policy database of vCenter with PowerCLI (Powershell v1.0)?

  The settings I want to modify are:

  The administration | vCenter Server Settings | Data retention policy. For tasks AND event held for

  I am using vCenter 4 update 4.

  I see, in this case we will have to fall back on the underlying method of the SDK.

  Try like this (you must be connected to the vCenter)

  $si = Get-View ServiceInstance $optMgr = Get-View $si.Content.Setting
  
  $spec = @()
  
  $event1 = New-Object VMware.Vim.OptionValue $event1.key = "event.maxAge"
  $event1.value = 120 $spec += $event1
  $event2 = New-Object VMware.Vim.OptionValue$event2.key = "event.maxAgeEnabled"
  $event2.value = $true$spec += $event2
  $task1 = New-Object VMware.Vim.OptionValue$task1.key = "task.maxAge"
  $task1.value = 120$spec += $task1
  $task2 = New-Object VMware.Vim.OptionValue$task2.key = "task.maxAgeEnabled"
  $task2.value = $true$spec += $task2
  $optMgr.UpdateOptions($spec)