Issue of SDRS to vCloud Director after you add the new data store to the Cluster of DTS

Similar Questions

• Comment fails to power after moving to a new data store.

  I had this problem a lot where migrate machines. I navigate to the data store appropriate and right click on the folder of the guest, and I select "move". I choose the new data store and sit back and watch the progress bar. Once its migration adds the guest to the inventory and try to power on. Sometimes it works, sometimes I have to repeat the steps above twice. Why missing files when trying to turn on when I move the files this way?

  Right-click on the virtual machine, click on migrate.  Follow the prompts for destination until you reach the Select data store.  Click the radio button "Move virtual machine and virtual disks configuration files" and select the new data store.

  -KjB

• Root user cannot create VMS within the Resource Pool after you rename the Cluster

  Currently, vCenter manages two clusters. I renamed a single cluster and the root user seems now are not allowed to create a new Virtual Machine in resource pools to the title of the group with the changed name. I tried to change the name of the cluster to its original name... no luck.

  The root user can still create a VM under the individual cluster nodes, but not in a resource pool.

  The cluster that has not been renamed yet can be managed completely with the root user. Resource pools it allow me to create a virtual machine.

  I found this last issue and checked on each cluster node that the ACEDataRoleId is-1 for each section: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031192

  I am at a loss, any help would be greatly appreciated! Thank you!

  I think it's a bug. When I created a new data center and migrate all nodes in cluster about him, the permissions problem I was experiencing did not follow.

  Thank you for your help.

• Simple question on the passage of ID variables in a url after you add a new record

  Hello;
  I know it's a simple question, I have a brain block. I'm going from a form and insert a new record in the db, but after I insert the new record, I want to pass the ID variable that gets are entrusted to him. How can I do this?
  
  It's my code to insert:
  
  < cfset EventDate = "#DateFormat(form.eventDate,"mm/dd/yyyy") #" >
  < datasource = "" #APPLICATION.dataSource # cfquery "dbtype ="ODBC">"
  INSERT INTO events
  (title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
  VALUES (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.title #" >,)
  < cfqueryparam cfsqltype = 'cf_sql_date' value = "" #EventDate # ">,"
  < cfqueryparam cfsqltype = "cf_sql_time" value = "#form.eventTime #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.location #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.contact #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.phone #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.fax #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.email #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form. "URL #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.sponsor #" >.
  < cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.body #">) "
  < / cfquery >
  < cflocation url = "events_RecordView.cfm" >
  
  In the cflocation I want to pass the variable ID, how about a new record?
  
  Thank you.
  
  CFmonger

  Try this. This will select in the query exactly what was inserted just enter the id and pass id just to get in the variable. If two people fill out the form at the same exact time, that assure that they are redirected to the appropriate page.

• After you add the icon of the entire page to the add-on bar, how can I get the add-on back bar?

  I need to take a snap shot of my screen and some of the info below the add-on. I opened the Panel of customization and drag the icon full screen at the helm of the add-on. The add-on bar gone as planned and I was able to take the snapshot required on the screen.

  Now, my problem is that I can't drag the screen to the Panel of customization because she and the add-on bar are gone.

  What can I do to fix this?

  First of all, to return to the normal mode, you can do one of these:

  • F11 key
  • Make a right click at the top of the screen for a menu item exit full screen

  When you have the normal display mode, if the add-on bar is gone, try one of these:

  • CTRL + /.
  • Right click on a zone empty of the tab bar > bar module
  • ALT + v (calls to the top menu Classic view) > toolbars > toolbar Add on

  Can go back you to where you want to be?

• Unable to access my Apple TV after you add the 2nd layer of security to my profile of Apple

  Hi, I have authorized after Apple install a 2nd layer of security on my iPhone and basically add it to my profile. Now I can't access my purchases on my 2nd generation Apple TV (film music, video). There is no way to get the required security code, which is showing on my iPhone, effectively disabling my Apple TV. This apparently an Apple problem, that bears down on us customers. Now life is terrible after I allowed to enter the 2nd layer of security because things at Apple don't seem to work. I'm so frustrated once again. Zed

  You can disable authentication to two factors of https://appleid.apple.com/

  You can report the problem through http://www.apple.com/feedback/appletv.html

  TT2

• After you add the new toolbar after clicking on the fact, made new TB cases disappear. Has worked w / all the worms. FF so far.

  I got a toolbar additional ((àle total de 3 personnalisé ajouté deles de barres d'outils) that was just too much to place & need 2 remove it.) No option to remove the toolbar named singularly, only option available was 2 toolbar reset, I did & began to build again once I added called "weather", he created & defining the space available, but after I hit 'complete' on customize toolbar, he disappeared. Find that I am unable to create and maintain new toolbars to help customize the toolbar. This is the first I have reset my toolbar and found this problem.

  Have you done something to the new toolbar before you clicked Add? Empty custom toolbars are removed automatically.

• After you add the Spry Navbar, footer disappeared

  After struggling to get a spry menu navigation bar working the bottom of my page

  missing mode live view and in browsers. The spry menu bar is the best way of

  make a navigation bar, or are there other ways that are maybe not so problematic?

  Here is a link to the site www.ellenlramsey.com

  Thank you

  Linda

  You have background images at the foot of your page that disappear when displayed in a browser... What do you take on?

  If so, it is because you have a background not closed in the below css selector css statement. In a first step of 'background', should be a hook closing) after .gif and before the semicolon:

  Also you have only the background css once. Don't know why (new I guess), but you seem to be duplicate your css selectors in your css file.

  {#home2}

  margin: 0px;

  padding: 0px;

  float: left;

  height: 40px;

  Width: 1024px;

  Background: url (images/home2.gif;

  do-family: "Times New Roman", Times, serif;

  background: url(images/home2.gif);

  }

  You don't need position: fixed; for the bottom of the css-selector I commented.

  {#home5}

  margin: 0px;

  padding: 0px;

  float: left;

  height: 191px;

  Width: 420px;

  background-image: url (images/home5.jpg);

  background-repeat: no-repeat;

  / * position: fixed; */

  }

• Equium L20-198 recognized not the 512 MB of ram after you add the 1 GB

  Hello, I added my Toshiba Equium L20-198 with a crack of 1 GB and there is already a 512 Mb slot installed in stock

  However only 896 MB memory is recognized by the Bios and xp Home Edt. -Any ideas?

  so the 512 MB not recognized at all and it apeares as not installed.

  The 1 GB is compatible with the 512 MB (available from stock)

  Http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=D21283D0A5CA7304 1 GB

  Why the 512 MB not recognized when I installed the 1 GB and when I removed the 1 GB, the recognized 512 MB and works perfectly?

  Hi Pop

  If you want to test with the new module of RAM 1 GB please try with PA3411U-1M1G. According to the specifications of it is compatible.

• Why XP does not display Japanese characters after you add the language pack?

  I installed XP on a new drive after a virus killed the other installation of it.  I noticed that XP did not display the titles to my Japanese music.  I tried to install the language pack, but he's really changed anything.  They were clearly visible on my old version before it crashed. Any suggestions?

  Imran M.

  Thanks for your reply!

  I need Japanese for display on all browsers (IE 8.0) and Opera, and I need it to appear inside Windows Media Player. (version 11).

  I do not download language files.  I only installed the language pack from my drive XP (service pack 2).

  Today, however, I started my computer and some "automatic updates" waiting to be installed.  I went ahead and install.  Afterwards, I checked WMP and all my Japanese music correctly displayed in Japanese.  (I don't know why).  Then, I went to IE and jumped a couple of Japanese pages and found that they were showing the language correctly.

  Then... I don't know how to solve the problem itself, but things seem to work the way I need them for.  It is a little frustrating not knowing how the problem has been fixed, in which case it should never show himself again, but no real sense to worry about this.

  Thanks for your help!

• After you add the Arabic language to my preferences, the numbers always appear in Roman numerals on everything except for microsoft office. How to do it so I can type in Arabic characters and numbers in all places, not just office?

  Already, I've added the Arabic language pack.
  He works in the office, just anywhere else.

  follow-up: I've created a KLC which actually works since Microsoft KLC does not work with the Arabic characters and Hindi digits on the same layout.

  I composed the automatic installer that microsoft allows you to make and downloaded on my website at: http://ryanglynn.com/2010/12/06/arabic-keyboard-layout-finished-programming/

  All the characters and Arabic numerals will work with win7 on this KLC. The installation is simple. Just open it and run the .exe

• HP xw8400: HP xw8400: black screen after you add the Bios password

  
  

  Remove the password bios reset jumper on the motherboard and reset the bios/cmos solved the problem.

  Hope this helps someone else.

• Failed to get the disk partition information when you add the new data store

  Hello

  Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

  I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

  I use Dell R900 with an EMC Symmetrix VMax SAN

  The size of the LUN I want to add is 741 GB

  Concerning

  Marius Aulie

  If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

  -set the LUN as a GROSS physical to virtual machine device

  -Run diskpart, select the drive and run the CLEAN command

  -detach the LUN to the virtual machine

  -try to create the data on the LUN VMFS store

  The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

  André

• Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

  * Original title: Vista 32-bit SP1

  I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

  I will certainly help you with this issue.

  This problem may occur if one of the following conditions is true:

  a. a program on your computer interfered with the installation of the service pack.

  b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  Here are a few articles that you can consult in order to solve the problem.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

  How to obtain the latest Windows Vista service pack 

  Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

  Solve the problems when you can't install Internet Explorer 9

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

• 48 new important updates after you apply the language pack

  Original title: Windows 8 updates after you have applied the language pack

  Hi all

  I bought the laptop with the English version of Windows 8 in 2013 and a few days ago decided to change the default language to Spanish.

  Language Pack has been successfully installed. But when I checked for Windows 8 updates available (I subscribe) I have seen that it is necessary to install 48 new important updates.

  Regularly, I installed all necessary updates. And now, after you apply the language pack, I have to repeat all the facilities of updates once more to be up-to-date and continue with Spanish? Or I missed something during the installation of the language pack?

  Thanks much for the advice.

  Kind regards

  Sergei Sumskoy

  Hi Sergey,

  We will first check if the 48 new important updates are already installed on the computer or not.

  To view your history of update

  1. Open Windows Update by sliding into the right edge of the screen and click on settings.
  2. Click change PC settings, and click then on update and recovery.
  3. Click view update history.

  Method 1:
  If the important updates are already installed on the computer, you can install all important updates available.

  Method 2:
  If all updates are already installed on the computer, you can reset the Windows Update components and check if there are new updates available.
  How to reset the Windows Update components?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the the Microsoft Knowledge Base:

  See the article for more information.

  Add a language or keyboard

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.