new battery replaced, but still showing it needs replaced

Similar Questions

• I get Creative Cloud edition student and Professor (a year) but when I download PS, Pr of Creative it cloud still shows I need to buy these applications, why is - this?

  I get Creative Cloud edition student and Professor (a year) but when I download PS, Pr of Creative it cloud still shows I need to buy these applications, why is - this?

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Pavilion DV6 s/n CNF0272P4W: internal (601) CR2032 battery changed but still get the alarm

  Alarm began some time ago. Enter laptop makes at startup, ok. Internal battery changed but still gets the same alarm.

  Battery type CR2032. Ran that test battery had failed Id 6C757T-5417NN-XD003G-C0BX03 primary SCHOOL.

  Bought the dv6 2010.

  Hello

  First error 601 internal battery is not for the RTC battery, it's for the main battery. You need to perform a test, if you need to replace the main battery.

  http://support.HP.com/au-en/document/c00821536

  Kind regards.

• New IMovie installed, but it shows 'Pause '.

  New IMovie installed, but it shows 'Pause' in the launch pad.  When I opened in App Store, it works perfectly.  How I erased the issue "Paused"?

  Paused is generally refers to the progress of the download. Not sure what you mean by "open in the app store it works perfectly. If I film is installed on your computer and works ok, so I do a restart of your computer and see if that clears the break in the launch pad.

• Why the hand tool in the top toolbar in the tutorial movies, but still shows, there's no way to put it there?

  Why the hand tool in the top toolbar in the tutorial movies, but still shows, there's no way to put it there?

  Hi JonRVan,

  In the latest version of Acrobat Reader DC you can anchor the hand tool in the upper part.

  Please make sure that your Acrobat Reader DC is updated (check the update under the Help menu).

  Then click on the button at the end of the floating toolbar.

  

  Kind regards
  Nicos

• I bought a membership, but still show me signs of the trial

  I bought a membership, but still show me signs of the trial.

  Where I am able to get the serial number? Abobe company will send me an email?

  Please try to log in & out of the CC desktop application to activate. Connect and disconnect activate Cloud Creative applications

  It should work.

  Concerning

  Stéphane

• My photosmart c309a print or copy black ink. I replaced new w ink but still does not

  I have a mac.  My photosmart 309 c has suddenly will not print or copy of black ink.  I cleaned the print heads, tried to align (not that), went out & soak the cartridge printing and eventually replaced w / new black ink.  Still nothing!  When I print, I get a black ink when I try to align, but nothing.  Color will print.  Same problem when I try to copy - no black but will get color.  What should I do?

  I finally had time today to try the method of back.  It worked!

  I took out the print head, continually ran hot water into the Pan so that the water has never been dirty (about 1 inch of water), has run a small flow of water in the black on the top screen that I determined that I had nothing to lose, gently dried the electrical parts and put it immediately into.  Turned on the printer, he crossed the alignment, etc. and printed black (and colors).  Just copied too dark.  It took me about 10-15 minutes for the whole process.

  Hope this works for others.  Thank you all for the input.

• Update still shows as needed to download even after installation.

  An update that has been downloaded and installed is always displayed as a new update available in my Windows 7, 64-bit system.  When you view the history of update, it shows as being installed. still Windows Update still shows as a new update available.  How can I fix this problem?

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339 releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I can't uninstall Age of empires III. It is said it was removed, but still show on the control panal

  When I deleted the program, it shows that it is uninstalled and brings me to a page of Age of Empires III, which gives me an option to 'complete '.  Supposedly the game has been removed but still appears in the Panel control as the games installed.   I have uninstalled several times without change.  Help

  Hello

  Follow these methods and check if that helps.

  Method 1:

  There is a 'Rapid Product Removal Tool' from Microsoft which can be used to remove the programs that we are not able to remove it by using the functionality of the program.

  Diagnose and solve the program installation and uninstallation problems automatically

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Method 2:

  I suggest you to follow the steps in this Microsoft KB article troubleshooting and check if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

• MovieClip is hidden, but still shows the same width

  Hello

  I have a moveclip with 300 x 900 content inside, I've hidden this content in this movieclip with mask form 300 x 250, infect I've hidden the content in this movieclip but it shows always 900px in height is not the amount of rest but showing the height that I'm unable to align the content dynamically. Is there any solution for this... ?

  Your images do not show a problem.  Hidden content displayed in the blue box of your second image would be correct.  Only what is behind the small hidden area will appear, but that does not affect the size of the movieclip being masked.  The movieclip will remain the size that it is.

• Need help please, bios sees the new hard drive but still cant boot from the cd-rom

  HI there, Im having some problems here. First of all, I have a Dell Dimension XPS Gen 2 with BIOS A06. I replaced the original hard drive to 120 GB because I received a stop error code with a new 320 GB (000000 x 24 or somethinglike that) but after research I was convinced it was the reader. I installed the new drive and the BIOS sees it under drive as primary drive SATA configuration... It's good, I guess, but now when I go to the sequence of hard drive I get (1. Unknown device (not installed) 2. System BIOS 3 boot devices. (Not installed) USB device) why the drive is not displayed here?

  OK, so now when I try to boot from a CD-rom Home XP I get "strike F1 to retry boot, F2 for Setup utility. I can't seem to get around this problem any time now. I can get it to boot from a floppy disk, but not the CD, why is this? The two CD-ROMs are appearing in the BIOS as second master and slaves. IM really stumped on this one, please help!

  Message edited by jaygen on 18/03/2008 20:22
  
  

• Creative cloud said new installed Photoshop but still old version

  Today, I tried to update Photoshop CC (2014) and the bridge to the new versions.

  Installation seems to complete and Creative Cloud says the apps are up to date, but they remain the previous versions.

  What can I do to remedy this?

  Well, I must have made a mistake because he says that he has no more recent version - and yet when I've updated again Lightroom CC tonight creative cloud App said it had also updated for Photoshop CC 2014 and to the bridge. And then he said that he installed these.

  And my applications folder shows the changes to the contents of Photoshop and Bridge records at the time wherever I did the updates.

  However, the applications themselves are still the same with Photoshop being 2014.2.2.

  Apparently, I jumped to the wrong conclusion.

  Thanks a lot for your help.

• LJ P1102w: HP LJ P1102w installs on the new PC, W10 but still OK on old PC just upgraded to w10!

  Buy new PC with pre-installed W10 - refuses to load the drivers - seems to do but message "driver not available" in the settings. Now I took my old PCto W7 that the printer has been connected by USB cable, and upgraded to W10, it connects back to the printer that works fine! Driver concerned is the NPI0D526B. I intend to transfer files and settings from old PC again and mothball the old but without the printer what do I do? Took the floor to support HP in the United Kingdom but unable to help - they describe this printer as "legacy" material even if it is still widely on sale, announced as W10 compliant. My Dell color laser printer installed on both machines W10 on plug & play base.

  OK, download the driver and took a few pictures along the way screen.  Let's try the following: first remove the remnants of the plant. Unplug the USB cable from the PC. At this point I suggest you to restart the computer for good measure.  If there are pending updates to install, select "update and restart", otherwise just "Restart."

  After restart go devices and printers folder, right-click on the P1100 series (or whatever it's called) and remove the unit.  Then, run the installer - I suggest a right-click on the file and select 'run as administrator '.  This will bring up a video.  Click on the tab "install the printer software.

  

  This will bring up an option to install easy or Advanced Install - Let's choose advanced so that we can have control what happens.

  

  Click Next, accept, next, next, next.  It should appear a box selection of this model of printer you have.  Then select the correct model (series P1100W).  At this point, it should give an option of how you want the printer to connect.  Select USB.

  

  After selecting "Set up in a way to print using USB", click Next.  At this point the guest should come and ask to connect to the printer by USB.

  

  There should be another box indicating that the installer is waiting for the connection.

  

  Connect the USB cable and installation should be completed.  (I don't have a Laserjet P1100 plug so I don't have screenshots apart from that).

  If something doesn't work not on the path please reply with details where things are distinguished by the screenshots shown.

• HP4600dn: I/O - 4600 problem clears but still shows "offline".

  Have had and used the new 4600dn printer without any problem for 12 years!  Now, it seems to not want to connect to other computers via cat5 connection. It comes up with 'offline' status in the menu windows printer. Every once in a while I can get it to print a small amount of text but if all the graphics are sent immediately, it chokes and changes the status 'offline '. Rude, nothing will be exhausted. Sometimes with a "X error" box in the menu windows "devices and printers" box with no description of the error.  Sometimes the cat5 (p/n J6057a) card is turned on and other times it is not. Reset the router and try other things does not to start to work. Each time happen a comm error (#49.1606 - Svc error) but cycling the power on the printer would always delete it. Not happened for some time. Clues?  I guess that the IO card (J6057a) is the culprit or the motherboard (C9743-60004?) that it plugs into. All the impressions of the printer menu work fine.  The other thing it does to the initial power to the top is to do a short flash of the data green led - something I don't remember having seen it before. Any help would be greatly appreciated!   (it has a new cartridge black and yellow - I have also a new cartridge Cyan, Magenta and black.) My distributor will not take back one of them because it is more than 30 days, he bought. I have a few days to return the other two!   The printer never had anything but toner HP / power supplies inside. If it's not fixable for a reasonable price (or boards are not available), anyone interested in toner?)

  It is a common problem. The 615N network card had problems and develops issues over the years. Basically, he developed cold welds on the main processor on the card. You can fix the map yourself according to the following instructions. With the power off, remove the card from the printer. Now remove the piece of plastic (2 screws torx 10). Now, take a dish from oven and conditioned the only card face the saucepan back so the bottom does not touch the pan. Now a good Preheat 350F (177C) and when the oven is ready, place the pan with the card in the oven for 8 minutes. Remove and let cool for 10 minutes. Put the back on the map, to be inserted in the EIO of the printer housing and turn the printer on and the odds are that the printer works ok. I've fixed more than 50 of these cards over the years, and a good 95% come back to life.

• Pavilion dv6-1050us battery charge but not showing as connected after bios update

  I have a Pavilion dv6-1050us, and before the update of the bios as recommended by HP my charger would show in the taskbar as well as the battery is charging and it has been plugged in as well as the led at the front left side of the laptop.  Since the update of the bios load icon in the taskbar does not display and the led light that recharges the battery watch is no longer turns upward.  I know it's power goes to the battery because the battery shows 100% remaining and unload only after I unplug the power.  Is there a way to restore the bios to the previous version, even if the bios has been flashed by the HP program uses?

  My antivirus program will not scan weekly it is when the system thinks it is running on battery power.  I have to manually start the scan myself.

  Help, please!

  Problem solved!