New BC Site directly from Dreamweaver allows only hosting Basics?

Similar Questions

• I have a question comparing Dreamweaver and Muse.  Can I create a website with Muse, then learn Dreamweaver, and edit the site Web of Muse?  Or would I need to start over with a new Web site based on Dreamweaver?

  I have a question comparing Dreamweaver and Muse.  Can I create a website with Muse, then learn Dreamweaver, and edit the site Web of Muse?  Or would I need to start over with a new Web site based on Dreamweaver?

  I went the same route. I started to want to learn web design and the Muse is an excellent tool. The code it generates, however, not to use it in Dreamweaver. This could be done, I think this isn't worth it, even for a real Geek. Once you get to Muse you will find there are things missing, stuff, you want to do, but are just tough in Muse or you can buy a widget. It is possible in DW and you get which through subscription, so it makes sense. Me what I know now, I'll go directly to DW to learn, except if you want results right now. If you don't want something to cause I stay with Muse and maybe learn to animate CC to add some pizazz to the site. If you only want a simple layout and a couple supporting stick with Muse pages if you want a larger site use DW. Good luck and check out this page to Muse on Google Plus Adobe Muse for beginners - community - Google +...

• Create a new web site

  I just installed CF 10 on my computer and would like to create a new web site.

  I would like to know just should create a folder to C:\ColdFusion10\cfusion\wwwroot\ or to C:\inetpub\wwwroot or any tool Adumim to do.

  Your information and help is much appreciated,

  Kind regards

  Iccsi,

  iccsi wrote:

  I just installed CF 10 on my computer and would like to create a new web site.

  I would like to know just should create a folder to C:\ColdFusion10\cfusion\wwwroot\ or to C:\inetpub\wwwroot or any tool Adumim to do.

  Installation of your Web site to C:\inetpub\wwwroot will make sense if you had configured ColdFusion to use IIS. In this case, you must transfer the content of \cfusion\wwwroot\ more at \inetpub\wwwroot\.

  If you intend to use ColdFusion Server Web part then, Yes, you can create a new folder in C:\ColdFusion10\cfusion\wwwroot\. The site will be reached by an address similar to http://localhost:8500 / siteFolderName. However, you can create a new web site directly in the default location, C:\ColdFusion10\cfusion\wwwroot\.  Then the site will be achieved through an address as http://localhost:8500.

• I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all s

  I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?

  If you don't have local copies of your site on your computer...

  1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel

  3 when you are prompted to hit "get the entire Site? Yes

  4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info

  5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel

  If you have a site already defined for your old Web host, go to #4 above.

• My site, created using Dreamweaver cs6 shows only partial images. He worked until a few days ago when I updated Java and Firefox.

  My site, created using Dreamweaver cs6 shows only partial images.
  He worked until a few days ago when I updated Java and Firefox.
  The URL is j - f - a.com.au

  The images are not entirely loading or do you have other problems?

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem
  • Use a type of compressed as PNG or JPG image to save the screenshot
  • Make sure you do not exceed the maximum size of 1 MB

  I noticed that some images show at the right end of the window and have set width: auto (right: 0px; width: auto) set the width according to the dimensions of the image (i.e. maintain proportions) and others fill the width full page.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I want to buy Creative Cloud for the photographer. I am in India. Can I buy directly from Adobe's Web site, or I have to choose a reseller?

  I work for a small publishing company and Photoshop and Lightroom for photography. I can see there is a separate package for photographers which includes Photoshop and Lighroom. Can I buy directly from the Adobe site or I have buy dealer only?

  Please go to pricing and membership creative cloud plans | Adobe Creative Cloud and make sure that you are connected with the great Adobe ID, registered in India.

• New content directly from the server

  How can I force my browser to download new content directly from the server? It was possible to do so using the SHIFT key pressed and make page reload at the same time. I tried and it didn't work. I'm doing something wrong?

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

• How can I email a photo directly from the new 'Photos' (on El Capitan)? There seems to be no way to do it. Nothing is marked for example, 'share'-> 'email address '.

  How can I email picture directly from the new "Photos"?  (on El Capitan)

  In Photos, and when you are in the Photos tab, you should see the following text in the upper right or go out to the right of the photo, you select. Clicking on it should show you the selection by email.

  

  

• How to allow only .gov Web sites on Windows XP using the installation of the broad-band

  How to allow websites .gov only on Windows XP. Use BSNL broadband. Made of internet sharing in LAN.

  Concerning

  Maton

  Hi Matt,

  This forum is for MSE who cannot restrict access of Web site you want.

  One of the possible methods that comes to mind uses the Parental http://www.windows-help-central.com/parental-controls-in-windows-xp.html may control with Windows Live Family Safety http://explore.live.com/windows-live-family-safety?os=other (according to the version of XP and whether or not you have a workgroup or domain LAN).  When you set up, allow *.gov, but reject all other types you can imagine (I don't think there is a way to allow only .gov, but you can exclude most if not all of the other busiest - check domain name registrars to get a list of options).  If you use a domain, way to go would be with a custom domain group policy to restrict access on all of the network (except perhaps the server or individuals of special category in Active Directory if you want).

  If that is not the case, and I think it might, please repost your question in the following forum to get the expert assistance you need: http://answers.microsoft.com/en-us/windows/forum/windows_xp-networking?page=1&tab=all.

  I hope this helps.

  Good luck!

• Unable to create the new folder, allows only new Briefcase

  my request to create a new folder allows only a Briefcase.  I want to create a standard folder.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

   

  
  If still no joy, see the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

   

  
  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

   

   

• Cannot download directly from Web sites

  HI -.

  As much as I love my Surface RT, it makes me irritated when I can't download and run things directly from the webistes. Today, I saw that you could play a game of Star Wars, so I registered and there is a button that says download only to run in this message: ' cannot run this application on your PC ".". "  I know that Windows RT is not the same thing as other operating systems, BUT there will be changes? What the large Windows update? What is in it for us users of WIndows RT?

  Well, the RT runs a version of look-a-like, work-a-like 'false' of Windows 8.  It can only run programs available from the store because the ARM processor cannot perform whatever it is compiled with the x 86 code game (in other words, regular Windows/DOS programs).

  He will NEVER be able to run regular programmes.

  Bottom line, the Tablet you want is the model Pro and not the RT.  This thing will never run regular programs.  NEVER!

  The ARM processor is identical to that used in the Android tablets and phones.  It's a great achievement by Microsoft to port Windows 8 for the class of processor and do run.  They did the same thing with Microsoft Office Home & Student.

  This big update was to fix the problems with the Tablet and make changes to make it work better.  At the same time, they added Outlook RT and they also added a SCANNING utility for anyone who has a scanner or an MFP with a scanner which is taken in charge with the RT to be able to scan.

  The only best bet, you have in the management of all games, is that the game becomes available in store.  Many of these games there can be converted to the course.  Simply too large and demanding of resources.

  Download the Pro model, and you can run what you want because 'HE' has the Intel Core i5 processor and will run almost all programs on the market AND it has the power and the resources to run these games.

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• I bought CS3 and LR2 nine from an apple store. I just moved to a new computer and it does not allow me to copy to my new without a product key. I started a conversation and they told me that I was out of money. $700.00 CS3 and LR $199.00. It su

  I bought CS3 and LR2 nine from an apple store. I just moved to a new computer and it does not allow me to copy to my new without a product key. I started a conversation and they told me that I was out of money. $700.00 CS3 and LR $199.00. It seems of course after spending a lot of money with Adobe that it would be an easier way to take care of your customer than to spend another $900

  Help!

  Adobe programs should be installed, they can be copied from one place to the other.  If you do not have the serial numbers for these products, then you're probably out of luck to run again on any new installation.  If you have the discs, then the serial number is usually on the disc cover.

  If you purchase these items in an Apple store, they are not new... they are quite old.

  I doubt that they say anything about you being the money you spent, more likely, they say they provide is no longer support for older products and you conclude are you the money you've spent - this isn't something rare to hear - it is unfortunate, but are not uncommon.

• I had Adobe Cloud (all applications) to 32.98 USD more than two years now, I have wanted to renew but new contract price is $79.98 - I only use Dreamweaver maybe three times a year, maybe pro adobe acrobat 4 times per year and photoshop maybe 2 times. Is

  I had Adobe Cloud (all applications) to 32.98 USD more than two years now, I have wanted to renew but new contract price is $79.98 - I only use Dreamweaver maybe three times a year, maybe pro adobe acrobat 4 times per year and photoshop maybe 2 times. Is there a plan months I can go that is close to the $32 per month?

  Hi Justin,

  The full price creative Cloud for individuals is $49.99 / month.

  If you add the broth, it's when you pay $79.98 / month.

  Please visit:-Creative Cloud price and membership plans | Adobe Creative Cloud

  For support:-contact us | Adobe

• I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

  I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

  I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.