new cpu insalled / with questions

Similar Questions

• HP compaq dc7600 new CPU arrives with firmware error

  I have the computer says in the title and it came with a pentium 4 cpu which is GHz. I have a p4 GHz cpu, which is the same socket and according to the website of hp, it is compatible.

  When I try to start the computer it comes up with an error message saying it needs a firmware update.

  I looked at the bios update but I don't really understand how it works.

  If someone could explain how to fix this error and or update the bios that would be great.

  Hello:

  You may need to install the latest firmware update.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 472276 & swItem = PSG_I23753-109013 & prodNameId = 472278 & swEnvOID = 1093 & swLang = 13 & taskId = 135 & mode = 3

  Read the instructions on how to install it.  You need a bootable USB key to do.

  Read these instructions on how to make a bootable flash drive and then copy the contents of the flash file to him BACK after making the bootable disc.

  http://www.techpowerup.com/forums/showthread.php?t=47812

  Paul

• With the help of a Bank of questions can I ask for a new attempt to a question if the user gets hurt first time

  What I want to do is-

  The learner is asked a question from a Bank of questions - the questions are all the short answer questions (all are numeric responses only)

  If the learner type the right answer - all good and learning proceeds to the next question in the question Bank and is awarded 1 point.

  If the learner Gets the wrong answer, I want the learner to be presented at the same issue, but now the learner has a multiple choice question/answer.  This response has 1/2 a point if it is correct. Learner proceeds to the question in the question bank.

  If the learner chooses the wrong multiple choice answer as they are reset to 0 (zero) points and proceed to the next question in the question bank.

  Is the highest possible or am I being too adventurous, with a Bank of questions?

  I guess I'm looking to give to the student a second chance and try again the question however provide a different format for their response

  I am using Captivate 8

  Thank you

  Question banks do not give you this level of control.  If your questions were NOT in a Bank of questions you can use advanced Actions to redirect your learners to a slide of specific question based on their response.  But you can't do that with question pools.

• New computer compatibility with FCP7

  I need to buy a new computer - mine is 2009 - 10.6.8! I edit in FCP 7 and cannot switch to FCP X right now. The new OS will host 7 FCP? I heard different things on this topic.

  Thanks for the help!

  All new computers come with OS 10.11.  It's five versions of the OS after that FCP 7 has been abandoned.  So keep that in mind.  Each released OS after the Studio has been suspended, is not the full support. They do not take FCP 7 in return in terms of functionality when they do the new operating system, updates... only FCP - x

  Installation it will be tricky... it may not work unless you do some stuff.  I'll have to copy and paste bits of Michael_LAX and put them somewhere so I can copy and paste them here.

  Note: Compressor, Qmaster, Motion will not work. They stopped working to 10.9 OS.

  FCP won't be fully compatible. A large number of features might work for you... and those you need. But there are reports of features does not, and these reports are random. Multiclip questions, or exporters. Log and transfer... import... is a biggie. If you do not already have plugins for L & T by the older creators of the camera, you can not get. They no longer hold those online. And the NEW cameras released after FCP 7 has been canned... not be supported. Third-party converter will be in order.

  You might want to consider Adobe Premiere Pro. It's more the PCF as anything.

• Photosmart c4280 print gibberish of the new Macbook Air with OS X10.9

  I can't get this to print.  It will show the page after page, a single line of gibberish for a simple print request.  The machine is a new macbook air with 10.9.4 IMac w/10.6 wife print wireless with no problems.  As does my son 7 windows-powered PC.  So I don't know where to turn.  I already did a reload of the pilot with the same results.  Any help would be greatly appreciated.

  No problem.

  Since it can print on other computers, have you tried another connection on this 10.9.4 computer? I just want to see if that makes a difference. You can try to use a USB cable to check if you are receiving the same question. If you do not, then you know that something is interfering with the wireless connection. If you do not have the same issue, then you will need to contact Apple support for assistance. Click here to read: Apple Worldwide Contact.

  Good luck.

• With the help of new access points with old WLC 4100; LWAPP layer 2 switching 3-tier

  Hi all

  We currently use two solutions Wiresless LAN - a 10 AP1230 access points-based autonomous (5 years) and a solution based on a Cisco WLC 4100 (4112, running 3.2) with 12 AP1010 LWAPP access points.

  First thing, we are considering to replace the stand-alone solution with the WLC one. However, I'm not sure if we can use the new access points such as the LAP1041N or the LAP1252G with our current 4100 WLC. Access reported data sheets 'Cisco Unified Wireless Network Software Release 7.0 or later version' 'software '. Does this mean that these access points can only be used with controllers running 7.0 or later?

  If we are unable to use the new access points with our current WLC and need to buy a new controller: can we use access points AP1010 current with a new WLC as the Cisco 4402?

  Second thing, it is that we want to expand the networks configured on the WLC 4100 to another site that is connected via VPN wireless. Wireless Setup guide indicates that the LWAPP mode can be changed from Layer 2 to 3 layers so that the access points can be configured with an IP address, which allows you to place access points basically anywhere as long as IP connectivity exists between the AP and the WLC.

  Y does it as described in a document with the change of mode LWAPP layer 2 to 3 layers? Or ist just the following steps (if I understand correctly):

  -Change the Mode of Transport LWAPP on the controller of layer 2 to 3 layers

  -Creation of a PA-manager interface with an IP address in the same subnet as the management interface (tried that, without changing LWAPP mode transport first and not was not possible - error)

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Is it really just as simple as that? All information about it is very appreciated!

  / edit: I would also like to know if the 1260 series access point are backward compatible with 802. 11B. Whereas it is stated in 1040 and 1250 for example series data sheets, it is not particularly mentioned in 1260 data sheet.

  Thank you

  Michael

  Well, let's start with the simple question/answer

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Yes, it's as simple as that.

  As for other issues, looks like you would be better served with a forklift upgrade.  New controllers and new AP.

  Now, the AP 1230/1240/1250. all work on the 4.2, 1140 code starts with 5.2 and 1040/3500/1260 are 7.0

  The AP 1000 series is not supported after 4.2 code.

  Refer to here for the complete list of the AP and taken codes supported:

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp610751

  From what I see, the 4100 is not supported after the train of 3.2.

  So, it really depends on what you are trying to accomplish with the upgrade.  If you are looking for a 80.211n support, you really want to be 5.2 or better, we had some problems with MRR + 40 Mhz channels, 4.2, 5 GHz band only.

• Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?

  Hi titi % 20wright,.

  Please use the link below to Download Adobe Creative Suite 6 applications

  Since you get two activation with a license, once installed you must activate the product using the same serial number. See, https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html

  Let us know if that helps.

• New HP Envy with NVIDIA GT730 / 2GB. PS don't detect GPU.

  New HP envy with NVIDIA GT730 / 2GB. PSCC detects no GPU. NVIDIA is correctly configured and installed. Native Intel graphics card does not appear even more. NVIDIA is set for PS and Snort to use only the GT730. PS frequently display the error message program when trying to define the preferences-> Performance, but I can do browsing Preferences-> general-> performance, and after that, I can then go direct to Preferences-> Performance. NVIDIA driver is current. PS Shows Panel Performance "detected: graphics processor white >, and, of course, to use and advanced are greyed out.» I'm out of ideas.

  I'm back to report the resolution, depicted by Adobe support. The question was user and admin rights file. The simple fix has been setting (Windows) PS to always run as an administrator user. He had no problem with the drivers, just PS being cannot write to files. The trick is in the debugging file. PS ran as administrator, everything was fine. There is probably a solution more appropriate involving find all files, it requires access to, but on a single-user computer, it worked.

• create a new virtual machine with the default settings?

  I was wondering if there was a way to create a new virtual machine with the default settings.

  For example, let's say I want all new Lion VM to have 2 CPU cores. Is there a way to set this automatically? There are other parameters I want a new machine to inherit automatically, I was wondering if there is an automatic way to do this, or is it a feature request...

  Thanks in advance

  lerker wrote:

  Just for my clarification, when you say a vm model, basically I would execute a finder copy then drag back to the VM library, right?

  Yes.

  On the orders of spcirpting, it would be unix commands or are there specific vmware controls that make your job easier (in Applications/VMware\ Fusion/content or elsewhere)...

  IIRC, VMware Fusion 3 and later versions has an AppleScript dictionary, but it is not yet officially supported and may not be able to do what you want so, basically, only Unix Shell scripts, that's what I was referring to.  For an example, see my script attached to the following response: Re: vmware - script of the creation of the vm and the operating system installation process

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• After update Macbook, I had a folder with question mark on it

  I was forced to upgrade my macbook, and then I saw a folder with question mark in this regard.

  Start your Mac by holding down the button Option. Who should start the Boot Manager window where you can select the startup disk, and then click Restart.

  Startup Manager: how to select a boot volume

• How to fix the folder flashing with question mark on mac pro

  I have a problem with my mac pro.  When I press the power on button, the grey of the screen become a folder flashing with question mark appears and it does not start.  What should I do?  I don't have an os x on a cd so I can not ignore the system...

  See:

  If a flashing question mark appears when you start your Mac - Apple Support

  What model Mac? What OSX version was on the Mac?

  If you do not have a partition recovery or restoration of the Internet

  On OS X Recovery - Apple Support

  Then you install an installation DVD

• Can I use Siri new Apple remote with my Apple TV 3rd generation?

  Can I use Siri new Apple remote with my Apple TV 3rd generation?

  No. not compatible.

• 2008 mac book pro screen flashing folder with question mark at startup

  2008 mac book pro screen flashing folder with question mark replaced boot hard drive and cable, continues to do the same.  any ideas to fix?

  Start your Mac by holding down the button Option. The should launch the window of Boot Manager where you can select the startup disk, and then click on restart.

  How to choose a boot on your Mac - Apple Support drive

• New session started with an advertising page and all my tabs are lost

  New session started with an advertising page and all my tabs are lost. Restore the previous session is not active. How can I restore my tabs?

  Great work!

  Sessionstore.bak files are ancient, probably autour time that you have installed Firefox 33 when the sessionstore-backup folder has been added.

  To try using one or more files in the sessionstore-backup folder, here is the process:

  (1) exit Firefox and it must create a sessionstore.js from the main level of the profile folder file.

  (2) rename sessionstore.js to sessionstore.old file, or if you think that you will ever need, delete it.

  (3) copy in recovery.js or previous.js and rename sessionstore.js.

  (4) start Firefox then try to restore previous Session. Those are the tabs you want? If this isn't the case, you can try one of the other files in your backup sessionstore-backup.

  If none of the files has the missing tabs, you could try a recent Windows restore point. It's more complicated on Windows 8 on Windows 7, and you could benefit from using a third-party utility. These have been mentioned in another thread:

  • http://nicbedford.co.UK/software/systemrestoreexplorer/
  • http://www.ShadowExplorer.com/

  Or... I read on a roundabout way to get previous Versions on the Properties dialog box in Windows 8. I can't test it myself, but here's what you do:

  In the address bar of your Windows Explorer dialog box, replace the current path with the following and press ENTER:

  \\localhost\c$

  Then click at the end and nail on the following (with your user name) and press ENTER:

  \Users\username\AppData\Roaming\Mozilla\Firefox\Profiles

  That should help you in the vicinity of your profile folder. Then you can right-click sessionstore.js > properties > Previous Versions, or try one of the files in sessionstore-backups.