New disks hard Hitachi does not fit on 8600

Similar Questions

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• a disk hard mbr does not recognize my card mother xp - 703

  Hello.

  I'm trying to downgrade my windows xp-703 aspire 8.1 for windows 7 and cannot operate.

  I disabled the secure boot. Windows 7 will allow to install on an MBR disk, but when I put the drive on the MBR (using another computer) that acer will not see the hard drive.

  I feel, this computer will only recognize the GPT disks.

  I even took a drive work with windows 7 and connected to this computer, and it still does not recognize the drive.

  Can anyone offer advice.

  Concerning

  Clive

  Hi all.

  Thank you very much for all your comments. It is resolved. I now running Windows 7.

  (XC - 703) my mistake in the subject line.

  I need win 7 because I have a software that does not work in win8 or win10.

  It has proved to be a BIOS initially. I got P11 - B1, who does not have the option "Launch the CSM". I had to reinstall win8, so I could run the upgrade of BIOS of windows that I was unable to boot from any external drive. Update BIOS version P11 - B2. Once I had started from my win7 disk (64-bit), I could use SHIFT + F10 to bring up a DOS window and use DISKPART to clean the hard drive.

  He then completed the installation of windows 7. I knew that he should like Acer provides Win7 drivers.

  Once again thanks a lot for your help.

  Clive

• Windows 7 disk HARD Propertis does not

  In windows 7 if I right click on the HARD drive in the computer properties and then select properties of system properties is displayed. Works OK in the MenuBar in the properties of the computer. The right-click method works sometimes briefly after that but then returned to the State of system properties.

  How can I correct this is a corrupted registry entry?

  Thenks a lot for any help

  Neil

  Hi Neil,

  Thanks for posting in Microsoft Communities. This problem can occur if the mouse pointer is not properly placed on the HARD drive. Provide the following information:

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Optimize Windows 7 for better performance

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.

• Windows installation disc needs for a new disk hard but is not available

  Hello

  The hard drive on my PC HP badly shot - he tells me I need to check for consistency, but it cannot and will not run chkdsk on a restart and will not let me create a restore disk.

  OK, I accept that I need to buy a new hard drive but I have no CD to install Win 7. The pc has a partition called "factory secctings" but it will not create a cd of Windows or a restore cd or a Sun.

  Microsoft has said that it is not available for me because my serial number includes the letters OEM. I had a case created at HP, and a person called me and said I should get the CD of the os from Microsoft, or from the store I bought from (Staples). Staples said they have no CD for Win 7 and cannot make me a. They said get them from Microsoft or HP.

  The number of cases is 3016271460

  See that I get nothing from Microsoft, HP, or Stqples. I never got a CD with the pc because, I guess, it's there on the partition to factory settings, but with the failure of hard drive I can't use it.

  All have a suggestion?

  Your hard drive can hold the DEFECTIVE SECTORS.

  The only way to get windows 7 disc is to buy a new Amazon / similar online stores / service centres.

  You can try this:

  ""http://www.sevenforums.com/installation-setup/151566-reinstalling-windows-7-a.html#post1300819 " "

  Browse the site and do the steps as shown.

• New disk hard internet rcognizing not

  I have a B110 Dell Demension that I swapped to hard disk with new and recharged with initial start-up diskettes. Now, it will not be recognized my broadband internet connection. I went to tools and internet to internet set-up options, but it still will not recognize

  Hi James,

  After a reset to factory on a Dell PC, Dell recommends that, reinstalling device drivers are carried out in a particular order. Please refer to the link below, to find out how to reinstall the drivers for your

  http://support.Dell.com/support/topics/global.aspx/support/DSN/document?c=us&CS=19&docid=1A0C0937D62A8739E0401E0A55174744&doclang=en&l=en&s=DHS

  Good luck.

• Sun disk MemoryStick pro duo does not fit into the laptop

  My disc solar memory stick pro duo does not fit into the laptop Envy nor the memory stick duo adaptor. How can I download my photos?

  Hello

  Whay is your cell phone? Many of them does NOT support memory stick family devices. You can connect your device to your computer OR you can go out and buy a card reader (USB connector, for about $ 10 to $ 15) that supports the USB key and plug it into the USB port on your laptop.

  Kind regards.

• When running Disk Cleanup, it does not remove anything to "Compress Old Files'.

  When I run my disk cleanup, it does not remove anything to "Compress Old Files' during cleaning.» Why not? I also need more disk space to defragment and I deleted all the programs that I don't use, but is not yet give me enough disk space.

  Compress old files not removes all files, compress files that are rarely or seldom used.

  If you get the low disk space, less than 15-20% free space, then you need to collect as much space as possible. However, the amount you get will not be a solution, only a temporary fix - it that.

  To add or remove programs and Windows components in Control Panel, you can uninstall programs as your plue no use - if you have. Not to be far uninstalling programs, you do not recognize, many elements are required for other programs work properly.

  Uninstall or change a program
   http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can also check to see how much space is reserved for the restoration of the system; by default, many GBs are usually reserved. Also disable hibernation as the file created can be 2-3 GB, sometimes even more.

  You must also consider moving your files and folders on a removable media, such as DVDs or an external hard drive. Still a great flash drive with 4 + GB of space can help, and their prices are reasonable these days.

  In addition to Disk Cleaner, you can consider running CCleaner. This is a free program that will remove the unnecessary and temporary files temporary Internet files of the most popular and many browsers other caches that can be cleaned safely.

  Since you are using Windows XP, there is a setting in CCleaner to remove the uninstallers of patches; These are the Windows Update files you've downloaded and installed over time and are there if you ever want to uninstall the update. But you can save these CD/DVD and then remove them safely from your system to recover the space. If you have ever removed one of these, you may be able to get beyond 1 GB of space.

  CCleaner
   http://www.Piriform.com/CCleaner

  If you decide to try it, by default, that almost everything in Windows Applications and is verified to be cleaned. You must first review the lists (they are compiled by what you have installed) and check/uncheck accordingly.

  Then click on analyze to see what will be removed (nothing is deleted when you click Analyze); When the scan is finished you can double-click on (or right click and select view detailed results) of the entries in the list to get more information.

  According to the detailed results, you can right click for options such as adding to the list of exclusions if you want the deleted item.

  Once that you are completely comfortable with your selections, you can click the run Cleaner button and then OK to put warn before vacuuming will run.

  CCleaner is also a registry cleaner that I don't recommend that you use - even if you have successfully run a registry cleaner in the past, it is quite possible that the next time will bring serious problems; they are not worth the risk...

  TechRepublic has just published this article about CCleaner:
  5 tips for using Ccleaner for degunk your system

  http://www.TechRepublic.com/blog/five-tips/five-tips-for-using-CCleaner-to-degunk-your-system/767?tag=nl.E101

  CNET editor's review:

  http://download.CNET.com/CCleaner/

  I know that this was not the miracle that you can have hoped, but personally recommended solution is a new, larger hard drive. In the case of desktop computers, an additional hard disk is useful for your personal files, especially for music, movies, photos and more.

  I hope this helps.

• Cable Thunderbolt does not fit into the Thunderbolt ports in my iMac mid-2011

  I have a Mac Mini (purchased in early 2015) I want to fix it up to use at work. I need to reformat home using my iMac (mid 2011) as screen and then copy all files and applications from the iMac to the Mac Mini. Both have ports Thunderbolt. So I bought a Thunderbolt cable from a third party (!) and I'm baffled... the cable, both ends, is part of the Mac Mini but does not fit (either end, either the port, there are 2) in the iMac, no matter how hard I jiggle it. It is not the cable... but I'm confused as to how the TWO ports on my iMac could be wasted. Believe it or not, I have never tried to use before. PS., they are certainly the Thunderbolt ports, with the lightning bolt symbol bit.

  1A everyone has ever encountered this? All my other ports work fine.

  2. is there another way to target display mode in addition to crush on both machines? I found this article: use your iMac as a display with the target - Apple Support Display Mode and it seems that I can use only Thunderbolt, but I wanted to make sure.

  Have you tried to return to the end of the cable? Don't be offended, it's happened.

• Toshiba Stor.E Canvio HARD drive does not appear

  Hello

  I got a Toshiba Stor.E Canvio for about 2 years without problems

  By using the external drive recently and the USB cable is removed accidentally. After attempting to connect the USB on my Mac again once the external HARD drive does not appear in the Finder.

  Passing through the disk utility, the hard drive is visible, but I am unable to check or repair the disk.

  The message I get is

  "Peut-t disk utility repair this disk. "Save as many files as possible, reformat the drive and restore your backed up files.

  The HARD drive itself is turned on, the light is on... but I'm stuck now

  Any help would be appreciated

  Gary

  I m not iOS expert and, therefore, I cannot recommend to any advanced troubleshooting but recommend you check out this thread:
  http://Apple.StackExchange.com/questions/130304

• Combo eSATA/USB3.0 T510i port: eSATA Cable does not fit

  Hello

  My T510i has a combo eSATA/USB3 port. I guess an eSATA must fit it. But the eSATA cable, I bought does not fit. (It fits into my external hard drive eSATA port, however.)

  Can you help me with this, please?

  Thank you very much in advance!

  Ben

  
  

• 8 GB of RAM for DV4-2045DX memory: 8 GB RAM Chip Notch does not fit HP Pavilion DV4 - 2045DX Entertainment Notebook

  Sir/Madam,

  Hello. My laptop is HP Pavilion DV4-2045DX Entertainment Notebook with 4 GB of memory which is 2 coins in 2 locations inside the machine.

  Because 4 GB of RAM is not enough to run my system now, I need to upgrade the memory of 8 GB that is 2 chips with 4GB RAM each in 2 slots.

  I bought RAM 8 GB chips online ordering
  http://www.seifelden.com/8gb-2x4GB-memory-RAM-for-HP-Pavilion-dv4-2045dx-laptop-memory.html?fee=39&f... .

  Item number: SoDimm_DDR3_2X4GB_B3377

  After I pulled out the existing RAM chips, I tried to put the new RAM 8 GB chips in 2 slots, but it does not fit the slot. The detail is that the size of the entire chip is shaped, but the notch on the long side of the upper part does not fit the clip into the machine.

  I tried to move clip to match the notch in the RAM chip, but the clip cannot be moved. I guess that there is a mechanism to adjust the clip to match the notch in the RAM chip, but I don't know how to do it.

  My question is:
  Could you please check why the 8 GB RAM chips do not have HP Pavilion DV4 - 2045DX Entertainment Notebook?

  How to adjust the clip to match the notch in the RAM 8 GB chip?

  Thanks in advance.

  It of still expensive but a little more like it:

  http://www.Amazon.com/Patriot-signature-PC2-6400-DDR2-800-channel/DP/B0027J3DAQ/ref=sr_1_6?ie=UTF8&QID=1457307169&SR=8-6&keywords=DDR2+so-DIMM&refinements=p_n_feature_five_browse-bin%3A677427011

  There are several options on Amazon.com. Just look for DDR2 SO-DIMM.

• Delete or remove the disc hard which does not exist

  Windows 7 Professional, 64-bit, all updates have been made.  Explorer > computer > drives shows disk space (q) but no other info like x GB free y GB, and there is no box with a blue line.  "By clicking on the disc (q) Local triggers an error box ' there is no location: Q:\ is not accessible.  Access is denied. »

  In looking at Start > computer > Manage > storage > Disk Management (q) does not appear while all other disks are listed.

  With the help of Jv16 Power Tools 2014 to search the drive (q) it just says "Directory does not exist."

  Digging further, I found the registry under HKEY LOCAL MACHINE\SYSTEM\MountedDevices\ watch? \VOLUME{ff00752d-F6E4-11E2-853d-002564e38f71}

  That same volume appears in hundreds of Warning Messages in the start menu > computer > Manage > system tools > event viewer > Windows Logs > request as a VSS 12348 warning.  In some cases there are two second VSS in the same warning messages.

  How to fixed the problem?  Fictitious (q) hard drive may be removed or deleted?  The registry entry should be deleted?  My guess is that a program is trying to access all mounted devices that triggers the VSS warning.

  Any help would be greatly appreciated.

  dax1792:

  Thank you very much, the problem disappeared after the reference, but with a slight difference.  I have been using Microsoft Office 365 Home Premium for a few months.  Looking at the Uninstall list, I found three ad for Microsoft Office, two for the 2010 version.  I uninstalled both versions 2010 and everything is fine now.  The Q drive disappeared.

  Thanks again.

• Toshiba canvio 1 TB portable hard drive does not work with windows 8

  The drinking Toshiba Canvio 1 TB hard drive is compatible with Windows 8?

  Hi Michael,

  Welcome to Microsoft Community and we are happy to help you on this question.

  According to the description of the query, the Toshiba Canvio 1 TB portable hard drive does not work on the computer.

  I ask you to answer some question in the context of this question:

  Do you have an error message when you try to access the hard disk on the computer? If Yes, what is the exact error message you get?

  I would like to inform you that the Toshiba Canvio portable hard drive is compatible with Windows 8.

  You can check the link to verify this compatibility with Windows Compatibility Center:

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=Toshiba%2Bcanvio%2Bportable%2Bhard%2Bdrive%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  Please answer us with the required information on this issue in order to help you.

  Let us know if you have other Windows related issues.

• I want to reinstall CS6 to a disk, but it does not accept the serial number

  I want to reinstall CS6 on my new Mac on a disk, but it does not accept my serial number

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

  In addition, IF El Capitan read below

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491