a disk hard mbr does not recognize my card mother xp - 703

Similar Questions

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• ASUS Tablet does not recognize SD card

  My got transform TF 101 does not recognize micro SD cards. How can I solve this problem?

  Hi, Odiec,

  You have the software express gate on the system?  Update of the software

  http://support.ASUS.com/search/KDetail.aspx?SLanguage=en&no=80E22F30-B3FF-1DFE-9DFB-5CED63C0B176&t=2

  Put the card in the slot

  Restart the computer

  Now the system does not recognize the card?

  You formatted the card?
  https://www.sdcard.org/downloads/formatter_3/

• Vista does not recognize video card

  I recently moved, and after I put my computer my monitor is not a signal. I plugged my monitor on the main port and it came. My computer does not recognize the card in the Device Manager. I opened it and inspected the map for all the Visual problems and plugged it upward and noticed that the fan on the graphics card not working. I then did a full restore of the system, reinstalled the installation CD supplied with the card after you disable the onboard and restarted my computer. Still does not recognize the card and after restarting it on my integrated card. Then, I went into the BIOS and selected PCI-E as my first. So... im out of ideas here, if the fan is still ongoing is not the card still work? I don't have another office to plug it in. Is there another way to know if the card works? Why it can't recognize the graphics card which was working fine before the move? On a side note, the computer was unplugged for 2 weeks during this time, but I don't know why this could be a problem.

  IM using Vista 32 bit.

  Hi Myriam.
  Thank you for visiting the Microsoft Answers forum
  If the fan on the card does not is an indicator that the card is not powered, so the only way to test it is to plug it into another machine to see if the motherboard is not giving power or is the card that is bad. You can also try to plug a PCI-E device and see if it has power.

  You have all the cables connected directly from the power supply to the graphics card?

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Photoshop does not recognize my card 960graphic GeForce GTX

  Hello

  I need help on my graphics (GTX 960). Everything's fine (yesterday until I update an extension called FlatIcon (Fi)). I used it for a long time and nothing wrong. Now, Photoshop does not recognize my card. I updated the driver NVIDIA, photoshop set to run as a high performance with NVIDIA Control Panel, remove FlatIcon extension, reset prerefences (Alt + Ctrl + Shift), increase the size of the Scratch drive (200 GB free now), but without hope. I hope someone can help me solve this problem, thank you 1 million.

  Wood

  Can you have a think when this started.  Could he have when you went from CC2014 to CC2015 for example?  CC2015 makes the best use of the GPU acceleration and seems to be more picky about the material.

  You are not able to check the use of GPU acceleration at all, or simply not advanced drawing mode?

  What driver version are you using?

  FWIIW, my experience with a GTX970 was that I could only use Basic Drawing mode in CC2014, but it suddenly allowed me to set the mode advanced for awhile and then changed me back to the basic mode when I upgraded to CC2015

  353,3 get mode advanced for a short period, but it passed without known reason.

  

  Displays how do you drive?

  You have only a GTX960?

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• Satellite C55T: Win 7 does not recognize the card, LAN and WLan

  I have a problem.

  I ve downgraded my Toshiba Satellite A5222 C55T for Windows 7 64 bit and it does not have many pilots.
  Windows does not recognize my network connection and it didn't install my wireless driver.

  Maybe I need a chipset driver, but I found no drivers for windows 7.

  Please help me!

  If Windows 7 has not recognized the LAN and WLan card, you have not installed the proper drivers.

  A5222 C55T satellite is the portable American model.
  The drivers can be downloaded from the Toshiba help page we: [Satellite C55T-A5222 | http://support.toshiba.com/support/modelHome?freeText=1200005866]

  Choose here the drivers / updates & filter by Windows 7 64 bit (left)
  Now you should get all Win 7 64 bit drivers for Satellite C55T-A5222

• PC does not recognize the cards inserted media or devices connected to the usb any longer.

  Recently, I noticed that XP Pro does not recognize storage devices of media inserted in the usb slots.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  The following articles might help you solve this problem.

  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Windows does not recognize my card or my camera drive

  Windows does not recognize my sd card reader or my camera.   I have no problem with all the other devices such as printer, Mp3 player (all) external drives.

  Thank you

  Laurie.

  Hi Laurie,

  ·         Have you tried to connect the card reader on different USB ports on your computer?

  We will check if the following is useful.

  Method 1: Try to connect the flash drive to different USB ports on the computer and check if it helps.

  Method 2:

  Step 1: Try to reinstall the USB controllers and check if it helps.

  a. click the Start button and then right click on my computer. Click on properties.

  b. click on the Hardware tab, and then click Device Manager. Expand the Bus USB controllers section by clicking on the sign «+»

  c. each of the devices under the USB controller section uninstall by right-clicking on each one, then click on uninstall.

  d. close Device Manager, and then restart your computer. Windows XP re - automatically installs the USB controllers in your computer, so you don't have to do anything further. Your computer is now running properly USB devices.

  Step 2: Log on to the manufacturer's Web site and update the latest chipset drivers and other updates to the device driver.

  See also:

  How to manage devices in Windows XP

• Why vista Media Center does not recognize my card tuner Hauppauge 1850

  I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.

  Hello

  I suggest that you install the latest driver and software from the Web site below and check if it works:

  http://www.Hauppauge.com/site/support/support_hvr1800.html

  Try to contact the hardware manufacturer for assistance.

  Hope this helps,

• does not recognize sd card

  my computer does not recognize when I insert my Secure Digital (SD) card. I have already tried to turn the computer off and then back on. I also tried the card in every hole, but nothing works.

  Hello dallyglr14,

  Thank you for using the Microsoft answers Forum.

  You may have a hardware failure with the card itself. You could try to plug it into another computer and see if the card is recognized. If the card is faulty, you will want to contact the manufacturer to determine if there is a way to diagnose the problem.

  Plug the device on another computer to verify that it works correctly and let us know what you find.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Reference Dell place 11 Pro - SD card does not recognize the card

  Anyone else have this same problem? I got my 11 Pro last night (from Dell direct) coming, I tried several SD cards, and none of them does not seem to work. It does not recognize that anything has been inserted into the slot. Very frustrating.

  Out of curiosity, have you tried different formatting on SD cards to see if it helped the recognition (eg. exFAT, NTFS)?

  -Woody

• Computer does not recognize SD card inserted in the printer

  I just bought an Officejet pro 8600.  When I insert an SD card or Memory stick into the printer, my computer does not recognize it so I can't transfer my photos.  This new printer allows is no longer this action?

  Good to know, message back me when you are ready and I will do everything I can to help you out!

  Have a great day and a wonderful weekend!

  -Spencer

• Drive problem hard dv8000 - does not recognize hard drives

  This is my first post, so please let me know if I did something wrong!

  OK, so the other day, I was working on my dv8000 when he walks just down. I turned it back and instead of properly start he told me that he could not find the operating system. Knowing that the machine was two disks in it, I swapped the primary with secondary school and always got the same result. Then, I went out and bought an external and attached drive Bay hard drive to my office. The disc was bad and kept cycling the heads. I have now bought a new HDD and the laptop is currently configured with the new disk into the main slot and the other original hard dirve I checked and it is good in the second slot. Here's my problem - when I go in the bios that the computer recognizes the two hard disks for boot options, but when I try to load XP from a cd to the laptop, it tells me that there is just no hard drives installed... What don't get me? I checked the disc for errors via the bios and the comeback test passed. I thought about formatting of readers but the bios doesn't have a format feature in what I can say. for all the intense and fine, the bios sees the readers, but the operating system does not work. Any ideas >

  Please help because this is my machine of the company and I can't keep borrowing my wifes laptop, she thinks I'm going to break this one too!

  Thank you.

  "When I try to load XP from a cd to the laptop, he tells me that there is just no hard drives installed... What missing am me?"

  Your cd does not necessarily include the required drivers. The original (MS detail) XP installation cd does not detect the SATA drives. Also some other readers can be detected, including the ATA/IDE standard. If you have your original factory CD, you could try this, it should work. You can try to install another operating system, for example. Ubuntu and see if these disk become visible.

• Windows 7 disk HARD Propertis does not

  In windows 7 if I right click on the HARD drive in the computer properties and then select properties of system properties is displayed. Works OK in the MenuBar in the properties of the computer. The right-click method works sometimes briefly after that but then returned to the State of system properties.

  How can I correct this is a corrupted registry entry?

  Thenks a lot for any help

  Neil

  Hi Neil,

  Thanks for posting in Microsoft Communities. This problem can occur if the mouse pointer is not properly placed on the HARD drive. Provide the following information:

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Optimize Windows 7 for better performance

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know if you need more assistance. We will be happy to help you.

  Thank you.