New driver has removed the option to print on macbook

Similar Questions

• Cloning of a disk failing on a new drive has left the computer unbootable

  I upgraded my hard drive because it is run in mode only PIO makes it incredibly slow. Some cloning software using different, I made a clone of my drive to a new drive. No matter what method or the brand of software that I use to clone the drive, whenever I try to start after the end, I get the same error "the ARC firmware startup configuration problem: has not correctly generated name of ARC for HAL (it will)..." "Is it a security measure built into XP to prevent me from cloning the drive? I lost days now trying to clone my whole disc rather than doing a complete new installation of the OS and all software. Any ideas on this would be useful.

  Ok. I don't get all the answers to this good. What I ended up doing was using a disk to reinstall XP boot to the recovery console and do a Fixboot difficulty MBR, then a bootcfg/rebuild. Seems to have solved the problem.

• I send email to different contacts in different groups. Apple has removed the old symbol of head and shoulders to select contacts. The new system if possible he's so screwed you cannot understand it.

  Apple has removed the symbol of the head and shoulders of e-mail that was used to select contacts. Very very easy. Now, it's so complicated on my new macbook, it is impossible to understand how to select several contacts during transfer or composition. Groups for me is not the answer.

  I'm not sure that I understood what you're asking, but you select several contacts in Contacts.app in the standard way. It is to hold down the ⌘ (cmd) key while selecting them with the mouse clicks. Then drag the names chosen for the To: field of the message.

  C.

• PAGE_FAULT_IN_NONPAGED_AREA___Msg DISK_0? Block 8: can? t read, replace the drive or remove the writing (Dell Dignostic softare scan) _ Protection

  I had purchase Dell inpiron 910 mini two years before now out of warranty. I got error on blue screen and then I restart the machine, I got the mode without failure when starting in safe mode, it stops and a disk read error occurred press Ctr + alt + del to restart I could even not to format the machine. could not start for winodow cd. Same blue screen message when starting from the cd, the message is as below
  A problem has been detected and windows has shut down to prevent damage to your computer.

  The problem seems to be caused by the following file: partmgr.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  If this is the first time you've seen this stop error screen,

  Restart your computer. If this screen appears again. follow these steps:

  check to make sure any new hardware or software is installed correctly.

  If it is a new installation. Ask the manufacturer of your hardware or software for any windows update you might need.

  If the problem persists. disable or remove any newly installed hardware or software. Disable BIOS memory option such as caching or shading if you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options. then select Safe mode.

  Technical information:

  STOP: 0 X 00000050 (0XF7895726, 0X00000000, 0X00000000)

  Partmgr.sys - address F7895726 base at F7893000, DateStamp 00000000

  I ran the Dell cd dignostic is to show the following error message:
  Error Code 0F00:1344

  MSG DISK_0? Block 8: can? t read, replace the drive or remove the write protect

  The given error code and message can use Dell Technical Support to help diagnose the problem.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Error code 0F00:1344 you listed are hard drive error codes. Usually, this means that the hard drive needs to be replaced. I suggest you to contact Dell support for assistance. Once the hard disk is fixed, you can try the methods mentioned below.

  Click on the link below, contact Dell technical support.

  http://en.community.Dell.com/support-forums/disk-drives/default.aspx

  Method 1:

  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.

  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.

  Description of the Windows XP Recovery Console for advanced users

  http://support.Microsoft.com/kb/314058

  b. perform a disk check.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Method 2:

  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• Need to retrieve data from the internal 512 GB sata drive (now removed the MB).

  MUSIC have a 512 GB mb pro with internal chips removed sata disk. I need to get information from the drive (now removed the MB). I expect to get the data via the USB port.  How to do this and with what cable. I have a MB air as replacement.

  Thanks for your help.

  Use this external case: http://eshop.macsales.com/item/OWC/MSTG800U3K/.  I replace in clone disks, data readers, testdrives for new OSXes, etc.  Any 2.5-inch drive, really.

• I want to allocate more disk space for my c drive and remove the drive d

  I want to allocate more disk space for my c drive and remove the drive d. I 26 gig on the d drive and only using less than 1% of it, and I have the same amount on c, but only 39% c left. How to do this.

  LEM explained the problems that you tried to resize partitions on the same drive.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  You can generate more space in the system (usually C) the folder move partition.

  For temporary Internet files, select Start, Control Panel, Internet Options, temporary Internet files. Settings and move back.

  To move the storage folder Outlook Express select from Outlook Express Tools, Options, maintenance, store folder and change.  http://www.tomsterdam.com/insideoe/files/store.htm.

  How to change the default location of the My Documents folder: http://support.microsoft.com/?id=310147

  You may also change the default locations of the files in Microsoft Office programs when you choose to move the My Documents folder. For Word, go to tools, Options, file locations, highlight the Documents, click on edit and change the path. For Excel, go to tools, Options, general, and change the default path.

  My Documents is one of the many the created system of special folders, which include my pictures, and my music. It can be more easily modified using TweakUi. Download TweakUI, one of MS powertoys, here: http://www.microsoft.com/windowsxp/pro/downloads/powertoys.asp.

  In TweakUi, select workstation, special folders. You can scroll down to see the full list of special folders to the left of the button to change the location.

  You can move programs, but to do this, you must uninstall and reinstall the program. With Word and Excel, the existing data files are not affected by reinstalling. Most of the work in question is going to be reinstall all updates issued after those that are included with the original Microsoft CD / DVD.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked. Notwithstanding, there are some files that are hidden. Again, you will not see the System Volume Information folder.

• adding new files or remove the old Windows Media Player files. (Vista)

  Since June 2010, I was not able to add new files or remove the old Windows Media Player files.  I can click on a new file and play using WMP or add to a playlist that is currently playing, but it does not recognize that it was added after as I close the program and re-open it.  Or I can delete the files that no longer exist on my computer but WMP always has them as my files.  When I click on add new media, it recognizes the right amount of files I would be adding, says to add them and then nothing is there.

  Your media library has probably been corrupted. To reset, follow the instructions for WMP 11 Vista at http://zachd.com/pss/pss.html#medialibrary . Note the reset of the library will make you lose all the counts to play and possibly ratings too. Tim Baets
  http://www.BM-productions.TK

• I used a cleaning program that has removed the solitaire games that come with the software package of vista. Is it possible to recover?

  original title: OOPS! Remove Solitaire games by mistake

  My husband used a cleaning program that has removed the solitaire games that come with the software package of vista. Is it possible to recover?

  Hi L-959,

  Try to reinstall the game Solitaire to turn on or off Windows features.

  Turn on or off Windows features

• HP officejet pro 8500 a910 does give me the option of printing in black and white

  Hello

  My hp officejet pro 8500 a910 does give me the option of printing in black and white. How choose to print in B & W when the option does not appear under properties?

  Thank you.

  Hello

  Used to print application, click file > print

  Click Properties or preferences to access the Printing Preferences dialog box.

  Click the Advanced Options button at the bottom of the window.

  According to the characteristics of the printer, click on the area of selection of printing in grayscale and as high-quality grayscale or black ink only.

• How to extend my drive C use unallocated space on my drive hard if the option "extend volume" is grayed out?

  I'm trying to erase my drives and have a clean reinstall of Windows 7. Endless hedges have attempted to quit of me, whose latest is my drive C is not able to use the unallocated space that was once my D drive (now deleted).

  I am interested in disk management and you can see my drive C, BDEDrive (I don't know what it is and can't get a straight answer on it as of yet), unallocated and free space (I do not understand the difference between space and unallocated space) in that order.

  I want a big C 1 TB drive, but can't seem to extend the C drive currently because it is grayed out.

  SOLVED!

  [for reference]
  It's also easy to move the startup information in the BDEDrive and giving the computer reboot, and then delete the BDEDrive. After that, the free space can be deleted (it becomes unallocated) and all unallocated space can be swallowed up by the C drive now that the option "Extend Volume" became available.

• Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  Why Microsoft has removed the WMI Code Creator from downloads V1.0? It is an amazing tool.

  It's no big deal. When you type the phrase
  Download wmi code creator
  in the text box of a search engine then you have a lot of alternatives, for example one below. You have to be a little flexible.
  http://download.CNET.com/WMI-code-creator/3000-2229_4-10731137.html

• Why squeeze foutmelding ik "Drive has not the ability to access this service" als ik een try PDF you i.e. Excel, said very wel naar in mijn subscription zit?

  Why squeeze foutmelding ik "Drive has not the ability to access this service" als ik een try PDF you i.e. Excel, said very wel naar in mijn subscription zit?

  Hi marcb53473002,

  Make sure that you use last DC of Adobe Acrobat Reader Acrobat Reader DC Learn & Support to use the services of export it to PDF help of Acrobat Reader | Export PDF to Acrobat Reader DC , as older versions does not now support.

  Alternatively, you can use export to PDF of https://cloud.acrobat.com/exportpdf online service

  Kind regards
  Nicos

• I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud

• Is there a way to RoboHelp9 to allow the option to print PDF for subjects in a published WebHelp?

  Is there a way to RoboHelp9 to allow the option to print PDF for subjects in a published WebHelp? My need is for context-sensitive help integrated in the application. Thank you.

  Hello

  What you would do is to create a PDF version of the help content. Then, enter this amount as a link, that the user can click to open or save the PDF file. They would then go from there.

  See you soon... Rick