New driver Nvidia GTX285 - upgrading?

Similar Questions

• Need new driver NVIDIA for my Satellite Pro 2100

  Hello

  Anyone know if there is a newer version of the NVIDIA graphics driver that comes with the satellite pro 2100? I looked on the Toshiba downloads section and on the NVIDIA site, I have not had any look to find everything. They simply stopped updating this driver?

  Any help will be thank you very much and I do a search before posting, but haven't found anything.

  Thank you

  Hello Steve

  Satellite Pro 2100 is fairly old unit. It is about 6 years old. Graphics card is NVidia GeForce4 420Go with 16 MB of memory only. Now the question: do you really want that Toshiba should support unit of 6 years with the latest NVIDIA driver? Please don't be crazy on me, but I really don't understand what you expect.

  A more interesting question to me is: for what purpose you need new driver? You want to use with newer games, or maybe you some graphic problems watching movies DSVD?

• Satellite M30 and new driver nVidia - after the awakening of the screen stays off

  I have Toshiba Satellite M30. Recently, I installed the new nVidia 9.1.3.1 driver (summer 2006) and after that, I started to encounter problems with wakes my notebook of booth mode and a problem with the power of the monitor.

  If computer sleeps or its monitor is turned off and I try to make it work again it hangs with a black screen (although I can see slightly backlight) and doesn't react to anything except the hard reset. What should I do? Going back to the old nVidia Driver?

  Windows XP Pro SP2 + all updates update MS. nVidia FX Go5200 video card

  Hello

  If you use the drivers directly from nVidia it can cause problems, because they are not designed for laptops. The downloadable driver of Toshiba for this model is the 46,44 version. If you want a newer driver, you can watch the new laptops with nVidia card. Or you can search the Internet, maybe you'll find a driver updated for notebooks somewhere.

  Good bye

• Satellite A100-003: Impossible to install the new driver NVidia of the Toshiba site

  I download new driver for nvidia from the toshiba site graphics card, but when I try to install it, I get answer that didn't find any supported video card.

  I have install the driver for laptop A100-003.

  Hello

  This sounds really weird. Are you sure to you´ve downloaded the correct drivers for your computer? What system do you have? XP or Vista?
  Maybe you´ve downloaded a version of Vista, and you have XP. It would be useful and enjoyable if say you what system you have.

  Alternatively, you can visit this site:
  http://www.laptopvideo2go.com/

  You will find the latest drivers who must work. But be careful before you install something and read the FAQ section on the site!

  Good luck and good weekend

• Need driver NVIDIA to upgrade to Windows 7

  I'm in the process of improving (new installation) an Emachine EL1200-01e from XP to Windows 7.  The video driver does not allow installation progress.  The display becomes illegible during installation.  I am looking for a driver (or edited. INF file) for the NVIDIA GeForce 6150SE nForce 430.  When I try to 'add a driver' I get the following error.  "the nv_disp.inf could not be installed. Contact your vendor for an updated driver.  The driver, I'm trying to add is supposed to be ok according to NVIDIA and Microsoft.  The computer is supposed to be compatible according to the Windows 7 Upgrade Advisor.

  Thank you.

  Thanks to all who responded.  As said in your answers...

  Note that the Windows 7 Upgrade Advisor made no reference to how a computer will work, only that it will be executed...

  Bottom line is that his won't work with win7, you need the drivers of motherboard

  I gave up.

• a windows 7 starter edition on the old drive that I upgraded to Home Premium, got windows 7 starter again on new drive but my upgrade key keeps failing

  You can use key upgrade once, or what I need to get the latest updates to work

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do

  new hard drive

  I bought a new hard drive as an upgrade for my previous hard disk which had no space and I want to put vista on my new hard drive. I have a sony notebook and cannot find a way to do thanks in advance

  How to pass windows 7 to a new hard drive using Acronis True Image Home 2011:
  http://www.PAGESTART.com/acronisnewharddrive01.html

  The same technique should also work for Vista.

  Note: Acronis now sells their 2012 for the UI version may be slightly different.

  J W Stuart: http://www.pagestart.com

• How to install W7 on a new hard drive with an upgrade disc

  This issue was published and responded differently and I'm looking to help determine that I'm not just doing.

  I have a desktop dell Inspiron 540 initially installed with vista and upgraded to w7 with upgrade disk.  PC currently has a raid 0 on two drives configuration.  I want to do a clean install of w7 on a new 2 gig disk and remove my raid disk, so I unplugged my raid drives and plugged the new drive with the boot sequence set on DVD as priority to start.  When I put the drive of W7 the PC starts and begins installation of W7 and passes by a couple of reboots before it comes to rest on and the screen eventually white.  My questions are the following:

  (1) is the w7 stall out because it's only a upgrade disk.  I've read that even an upgrade disc must fill a system knowing that I finally needed to authenticate the license but this not yet get there.

  (2) or is the problem that none of the original pilot was loaded onto the new drive before trying to install w7?  I don't know if I have the disks just as the PC was rebuilt with new hardware warranty, so I don't know the Dell disks I have are no longer valid and if I install w7 without them.

  (3) if I do not have the right Dell driver disks is there a way to only install drivers without having to install as I prefer to do a clean vista w7 install.

  (4) when my pc normally starts in a raid 0 configuration and passes to the bios Setup screen, there will be an another intel matrix storage screen which is where I need to enter CTRL + I to enter the raid configuration...  After that I disconnected my original discs and installed a new this screen intel never presented itself - is that because I have not installed the drivers from dell?

  (5) others have suggested that I should keep the original discs in place for now, install my new hard drive, install W7 on the new drive and then delete older readers.  However, if I do and if Miss me the physical disks, if I remove the old drives, which allows W7 still starts it correctly once I deleted the old hard.

  THX,

  The disc itself is a full install of W7, it is key that defines as an upgrade and the normal solution to a blank disc is not enter key questioned at first, but to call the Activation Center later. That's because Windows 7 is a completely new system and use nothing of Vista/XP even if the upgrade should be complete.

  If the system restarts once again successfully during the installation, then it booted from the HARD disk as the installation tasks are all made from there. As JW suggests to test the HARD drive, most manufacturers offer on their website diagnostic utilities that are in the CD or bootable USB format then not dependent on the installed o/s. In addition, a contender is memeory questions, either swap autour, replace or reduce the system to a stick to eliminate the problems.

  Make sure RAID mode has been disabled in the BIOS for Windows 7 AHCI or SATA mode should work well when a single drive is equipped with RAID should disable auto. The keys Ctrl + I is a precursor of the o/s drivers so a function RAID BIOS Setup screen is not apply to it is not there. He disappeared because there is a single disc and you can't build a matrix on a single disc.

  All compatible motherboards in PC today have all the installation of Windows 7 no driver needed. They are normally added after the initial installation. If it's still a Dell Mobo, then the same driver drive should work as it will identify all required driver.

• I need to install a new cd/dvd in my Dell Inspiron 1545 driver, since I upgraded to Windows 8

  Original title: HELP!

  I need to install a new cd/dvd in my Dell Inspiron 1545 driver, since I upgraded to Windows 8, because I totally can illiterate, computer, someone tell me the best way to do it. Thank you in advance any help would be greatly appreciated

  Hello

  Check with Dell Support, their drivers and documentation online and ask in their forums
  on the methods and problems known. (Dell will have 'how-to articles.)

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  =========================================================

  Is the issue that your drive does not work after installing Windows 8?

  -Use and you need to use it again after trying the methods below.

  What happens if a device is not installed correctly? (Run the hardware and devices Troubleshooter)
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Starting from the command prompt from the desktop - Windows key + X - (Admin)

  SFC/scannow
  (space between C and /)

  Then run CheckDisk execution - chkdsk /r (the / r includes the parameter f controls)

  Windows key + X - command prompt (Admin)

  Chkdsk /r
  (space between the k and /)

  Or run CheckDisk in Windows 8:

  Improve performance by optimizing your hard drive - see "to repair a drive.
  http://Windows.Microsoft.com/en-us/Windows-8/improve-performance-optimizing-hard-drive

  --------------------------------

  Windows key + X - Control Panel

  Try this - Panel - Device Manager - CD/DVD - double-click the device - driver
  Tab: click on update drivers (this will probably do nothing) - then do a CLICK RIGHT to the road.
  UNINSTALL - REBOOT this will refresh the default driver stack

  ====================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  =====================================

  Expert help with CD/DVD drive issues available here:

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Tecra S2: nVidia 6600 new driver update available?

  I think all the drivers from tecra are outdated!
  I mean, couldn't toshiba release more drivers more often?
  During my year 1 S2, I saw 2 pilots diferent video!

  Just to check how oudated are the real drivers, opengl support is only 1.5 when there is already a lot of drivers which support opengl 2.01.

  Hello

  First of all why you are suggesting that the graphics driver is outdated on the Tecra S2?
  I checked the page of the Toshiba driver and the latest version of graphic driver nVidia made since 16/12/05. I think it s not very old.

  The fact is that graphics cards in notebooks are not the same as on the desktop PC. They are different and in this case, it is important to use the drivers that are specially designed for the use of the laptop.
  Toshiba offers many books and generally, you will find the same graphics card in several books.

  If you want you can check the drivers from other laptops with the same graphic card.

  concerning

• I can not format or partition my new drive HARD internal

  I have a MacBook Pro late 2011. The other day, I was unable to boot and got the flashing question mark folder. When I command + R, my old 500 GB of HARD drive was not appear. I decided it was time to upgrade. I bought a Seagate 2 TB drive and installed it. I am now ready to install OS X on it. I am able to see the drive when I go into Internet recovery, but failure of attempts at partitioning and formatting. The error for the formatting is "wipe data on the volume to avoid future to probe accidental is not" and the error for partitioning is the same. I looked for answers and I tried all the solutions I could find, but I am unable to do the single user mode that I can't boot into it successfully.

  Are there other options or ideas that guys maybe I can try?

  I suggest that you consider getting an external adapter or place the new drive in an external enclosure. Install Mac OS X on this subject here.  When you are satisfied with the way it works, and THEN do the transplant.

  This separates from the software install the registry numbers, reduced the problem by half and the two halves solvable.

• Satellite L655-1GN - failed to install the new drive HARD original recovery image

  Hello

  Just had to buy a new hard drive and put the latter with the former. I already checked that he was the same size and SATA as the original hard drive. When I tried to start a new installation of the operating system from the recovery disk (that I bought the Toshiba provider in my country - MAFIL), the boot option was not available.

  MAFIL representative told me that the recovery disks only for the reinstalliation of the OS on the original drive, but are not suitable to install a fresh copy again. So, how can I install my Win7 64-bit, with all settings on the new drive and Toshiba apps?

  Thank you
  Tomer

  On many models of laptops different change HARD drive or upgrade can be done by the owner of the laptop and after doing this, you can install recovery image using the disc of recovery without any problem.

  I did several times on different models of Toshiba laptops. This works.
  I really don't understand how someone can give you this information.

  By default the BIOS settings, restart your machine and press F12 at startup. When the boot menu appears on the screen put the recovery disk ODD news, select CD/DVD as a boot device and press ENTER.
  What happens when you do this?

• Re: Satellite X 200-251 (PSPB9E) - a newer driver available?

  Is there a newer video driver recommended for the X 200-251 (PSPB9E) using the GeForce 8700 M GT graphics chip? One posted on Toshiba support pages is old way now, version 179,48, February 2009.

  I need a newer driver that a few apps that I need the latest version of CUDA to run correctly. One of my office machines running version 197,75 since May 2010, who does what it takes. Did someone tried this driver? Is there a new Toshiba recommended driver as that is more than a year (179,48)?

  Hello

  The most recent driver is always placed on the Toshiba driver download page. This means that if you have already installed these drivers, your notebook computer is up to date and there are no updates available at this time.

  Theoretically, you can install the latest driver from nVidia directly but this driver is not pretested and it s on your own risk!

• Impossible to update driver nvidia on Satellite P25-S507

  I followed the instructions:
  1 uninstalled the original nvidia driver
  2. install the updated driver downloaded from www nvidia page.
  3. it has been WITHOUT RESULT. The new driver is not installed, so I had to reinstall the older driver
  4. as a result, I can't use OpenGL 1.5 and my generated interpretations are of poor quality.

  So: Why can't update the driver nvidia?

  Hi, any idea on a Machine we, sorry

  Good bye

• Satego X 200 - 21U: question of driver nVidia graphics

  A new xp for satego x 200 player is online. It work?
  He is a driver from ati?

  My laptop has an nVidia 8700 m gt
  Download bad?

  Do you have anyone tested this driver?

  Satego X 200 series was equipped with two different graphics cards! ATI and nVidia.
  If your computer supports the nVidia GPU you need to use the graphics driver nVidia!