New firmware Version 4

Similar Questions

• Nighthawk R7000 Firmware Version V1.0.6.28_1.1.83 adds a new network called NETGEAR41-arlo_246912

  I just upgarded my R7000 for the latest firmware of the device itself. Now, I have an additional network that matches my real network called NETGEAR41-arlo_246912. I tried to switch my camera on another channel, and he followed. He got the exact same force that my wifi. The net effect is that I have 2 signals on channel and my coverage and bandwidth has suffered.

  Anyone know what it is and how to turn off?

  OK, found a similar bug by someone else with a solution:

  https://community.NETGEAR.com/T5/Nighthawk-WiFi-routers/r7000-firmware-version-1-0-6-28-strange-3rd-...

  Basically, they have added a feature and it enabled by default. It is in the STANDARD settings and no ADVANCED setting. Disable the arlo. Ugh.

• Camileo H20 - new firmware

  Hi, in my view must issue new firmware, which addresses the following issues:
  * - Files AVI unsupported-> avi is invalid *.
  * - Date and time display will not turn on *.
  * - There is no difference between PAL and NTSC settings (still 30 fps) *.
  * - Setting is reset after switching camera market (quality video, stabilizer, macro, flash,...) *.

  * Please, technicians and software developers issuing a new firmware that will fix the above problems

  Please other owners of this type of device, to join the discussion on these issues.

  Thank you very much
  Jirka

  Agree.

  Still more to add:

  -Secret function (undocumented) on firmware version (low pressing button more in combination with the wheel upwards at the same time) must be placed in the regular menu (say under menu of PARAMETERS such as the VERSION of the FIRMWARE.
  -Also autofocus (enabled/disabled) must exist in the menu
  -Combination of bottom more button and jog now could be used for manual focus adjustment (if auto-focus is turned off in the menu)

• Toshiba 46TL838 - I need new firmware

  Hello

  TV: 46TL838
  6.0.08.1 worm.
  IM from Poland - Polish version /.

  My TV does not have to update the menu. IM connecting to the ethernet LAN

  I need minimum 6.4 version because in my sweet 3D option does not work on the USB key.

  I can guarantee to the tv and I have to take it to service support but I have a long way to the service.

  I'm surprised that there is no firmware on the Toshiba site. I was disappointed.

  Please help me.

  Hello
  Especially the firmware for all Toshiba TV European models can be downloaded from the Toshiba page
  http://www.Toshiba-OM.NET/firmware.php

  But for the two sets of series RL838/858 and TL838/868, you will need to use one of the following methods:

  * Method 1: *.
  _Automatic network warning

  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning

  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

• new firmware Fuze 1.01.01.22, no more "creat playlist?

  When I got the firmware 01.17 fuze, let me make a right click on a folder that was on the "rocket" and I see the

  choice, creat playlist. I did that and renamed the file pla and he left the folder music for my fact

  folder on the "rocket". then I can just go to the selection of playlist on the main menu and see what that reading lists

  I did. no stinkin' win media player tool to use, it just me.

  Well, the new update that broke, they also took the choice of Radio region, Japan.

  OK, I got a lot of good info here.   : womanhappy:

  I had the 01.01.22. new firmware detonators and the info on it said it was good 22 p Pacific version I am the Japan.

  but I couldn't get the choice of Jpn RADIO.   : bravohelen: FIXED that by reinstalling the old firmware of the Pacific 01.01.15P.

  (Thanks to have the link on the map here, but perhaps make it easier to find on the homepage of the rocket?

  I also can't just right click on a folder on the "rocket" which was under the music folder and RIGHT click and

  See the choices, "creat playlist": smileyvery-happy: FIX that by changing the USB MODE to how I got it, it's

  to AUTOMATIC DETECTION.

  When you have it on AUTO, you see more cases on the "rocket" and you have a Playlist file and the above

  Difficulty of the words. It's really nice to simply move a folder to the "rocket", put it in the folder music rocket. then just

  Right-click on the new folder and choice, the playlist of creat. then rename this folder I've done in music

  folder, and move it to the folder Playlist Fuze. NICE, don't Win Media or Winamp necessary tool.

  as I read on this forum very informativ, Yes, delet to stuff that has been added to an another USB MODE, you

  have return to this mode to delet or Formate, so make sure you put your rocket to

  AUTOMATIC DETECTION in usb mode.

• EA6500: What changes or improvements of the new Firmware offer?

  I just connected to two of my three routers EA6500 and noticed that they have new firmware: 1.1.29.162351. This new version gives anything of note... or... did some minor changes?

  See the release notes for the update here:

  http://support.Linksys.com/en-us/support/routers/EA6500

• Site WEB BLOCKED on WRT54G V6 (Firmware Version: v1.02.8)

  Hello friends,

  In short: why block some Web pages and others do not use this feature in my router?  As mentioned above, I run a small office and uses one: WRT54G V6 (Firmware Version: v1.02.8): router.

  For example, I managed to block sites like 'sex.com' and others.  Also, blocking sites by keywords such as: News, music, vid, naked, etc.  BUT, when I try to block FACEBOOK or TWITTER or by URL or keyword, guess what: IT DOES NOT WORK...!

  No idea why this is happening and how can I be successful in the configuration of this feature?  I'd appreciate that!  Blessings...

  Just to let you know two things:

  1. I contacted Linksys live chat and they confirmed Web sites I want blocked using the protocol https, thye can not be blocked because the router features

  2. as mentioned before, I warned an account with DynDNS as you suggest, followed their instructions, and after 24 hours or more, the protection is active...! Now no one in my little office is losing work time to monitor their FB status or send tweets!   In addition, because my office is on the first floor of my house, I have peace of mind because I can block different sites using their "protection plans" categories: sport, games, porn, social media, blogs, videos, etc.   I love...!  I would recommend this service to anyone

  Thank you

• Access Point WRT1900AC & Firmware version: 1.1.10.167514, it cannot be accessed the config page.

  Hello!

  I am a new user of router dual-band WRT1900AC . The installation has been updated instantly to
  Firmware version: 1.1.10.167514
  Release date: June 30, 2015

  My WRT1900AC is configured as a wireless gateway.

  https://community.Linksys.com/T5/wireless-routers/WRT1900AC-as-wireless-access-point/TD-p/847286

  Also, I have disabled firewall and uPnP.
  A tutorial here:

  http://www.Linksys.com/us/support-article?articleNum=140371

  Everything works except that without access to the router config page.

  The problem is, I can't access my page to config WRT1900AC Wireless Access Point and the only solution is to connect temporary exit HAND ROUTER LAN to WAN WRT1900AC, can I access my AP

  (after restart of course). Change after I return the cable to the LAN again and restart WRT1900AC. This works.

  Yesterday, I spoke with live chat. I received recommendations:
  "Once the router is configured to bridge fashion, page configuration accessible only using its new IP address. The new IP address can be found on the main router DHCP table. It is because only in LAN - LAN, the

  WRT1900AC will be his disabled DHCP. »

  I also saw Table of customer routers main DHCP but I have not found the IP address of my wireless WRT1900AC Access Point there. I think it is a bug in the version of the Firmware: 1.1.10.167514
  Page config in the case of WRT1900AC Wireless Access Point is isolated or possible only thanks to the WAN WRT1900AC. It would be nice if someone confirms that and maybe in the next version of

  fix. :-) I have a beautiful smartphone App "Smart Wi - Fi" and I can not comfortably use it due to this error/bug.
  Otherwise everything works well and stably.

  inspire wrote:

  Hi chadster766!

  Thanks for your suggestion and a quick response. I have a feeling it would work then as you described. But how to set Internet settings in mode Bridge? I've already put a static IP address router IP address WRT1900AC. I see it with IP scanner.
  If I leave the cables as you suggest (hand router LAN to WAN WRT1900AC), the Internet does not work. In this case go to the config page, but Internet with other devices will not work. Also good Wifi, it works but can not access. How to set the Bridge Mode? (I think this is my problem in this scenario)

  IP address of the router (LAN):

  Connectivity-online-online details router LAN => Edit

  * If your main router IP subnet example is 192.168.0.x, then set the address of the WRT1900AC IP to an IP outside the range of the main router DHCP. Ex: 192.168.0.2

  Bridge mode:
  Connectivity-online Internet-online IPv4 settings => Edit-online Bridge Mode

• WRT54G (version 2) Firmware Version Question

  Hello

  Beautiful room here. I'm glad that this facility exists.

  I have the router WRT54G version 2. Finally, I upgraded the version of firmware years before Cisco Linksys bought.

  A recent announcement by the people of Black Hat (treaties in this article of TechSpot) about their intention to publish a validation tool to exploit a vulnerability of DNS rebinding on a great many routers SOHO forced me to check for the latest update of firmware for my router.

  The interesting thing is that my router's Web interface lists the current version of the firmware as 4.30.12, but the latest version of the downloadable firmware that I see listed on the support site is 4.21.1. I'm not very surprised by this apparent anomaly. If I remember correctly, that firmware version 4.30.12 download is a beta that was supposed to fix a problem connecting WiFi to a certain type. If this version of the firmware was still considered a beta at the time of the acquisition of Linksys by Cisco - or a 'stable' later firmware version incorporating the same or better fixes for the issues addressed by 4.30.12 that had been produced at that time-so maybe 4.30.12 was ruled out.

  If you read the article of TechSpot and the associated table of preliminary vulnerability, test reports, you'll see that router WRT54G version 2 is not specifically listed. Version 3 of the router is listed as vulnerable, and version 5 of the router is not.

  So, my questions are:

  Everyone here is aware of information indicating whether or not the problem of DNS Rebinding vulnerability affects the WRT54G version 2 with the last registered (4.21.1) router firmware version?

  If so, does anyone know if yes or no Cisco plans to release an update for this old router?

  If the router is vulnerable and will not be solved with a firmware update I'll probably have myself a new LInksys router which is not listed as vulnerable. (Believe me, I'm not leaving this thread to bash Linksys. This router ran like a train of 24 hours a day for years without a single hiccup that was not directly attributable to the problems of the ISP. For the price, it's one of the best purchases of equipment I've ever done calculation. And I have done this since the beginning of the 80s when I was using a CP/M system and an Apple / / e.)

  If the 4.21.1 version firmware for WRT54G version 2 is not affected, I wonder if anyone knows if yes or no 'downgrading' of 4.30.12 to 4.21.1 is likely to lead to a failure of the router. (I'll probably try it anyway. If it brick the router I'll just go ahead and get a new one.)

  BTW, I use this router with the ease of remote administration and UPnP off and strong admin password that is changed each week. (When I always used wireless I used WPA2 AES with strong password, but I am all wired now with the systems running Debian testing).

  Forgive me for talking to myself. I decided to just go ahead and "downgrade" of the 4.30.12 firmware 4.21.1 version - just because I prefer to use a version of firmware known and supported for this material. The downgrade has gone well, so no worries about this.

  I'll look for news on whether or not this version of the firmware on this particular router is vulnerable to the flaw in DNS rebinding and acts accordingly.

  Sorry for the noise.

• Options VPN new Firmware RV320 1.3.1.12

  Hi all

  I just upgraded my RV320 to the 1.3.1.12 firmware version. I noticed that with this new firmware, two new VPN options are available, Flex VPNand OpenVPN . Unfortunately I can't find any documentation on these new options... :-(

  Can someone point me to the documentation?

  Thanks in advance for your prompt response!

  Cheers, b.

  Hello Bernard,.

  Please contact Cisco support community centre.

  I hope you do well. I'm really sorry for the inconvenience caused. Please click Help at the top right of the corresponding page on the RV320 GUI, which will show you the descriptions of each option.

  You can contact our HWC team via chat using the links below:

  https://supportforums.Cisco.com/community/4841/online-chat-support

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• Need help with changing PowerCLI script to get the interface driver NETWORK & firmware version?

  Hi all

  mattboren created the script below for a list of BIOS hardware version and firmware version:

  ## Script function: quickly get BIOS date, Smart Array FW version, and iLO FW version for HP hosts in a given location (folder, cluster, datacenter, etc.)
  ## Author: vNugglets.com -- Sep 2011
  
  ## folder in which hosts in which we are interested reside
  #$strHostsFolderName = "myFolder"
  #Get-View -ViewType HostSystem -Property Name, Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo -SearchRoot (Get-View -ViewType Folder -Property Name -Filter @{"Name" = "^$([RegEx]::escape($strHostsFolderName))$"}).MoRef | %{
  ## cluster in which hosts in which we are interested reside
  
  $strHostsClusterName = "Production"
  Get-View -ViewType HostSystem -Property Name, Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo -SearchRoot (Get-View -ViewType ClusterComputeResource -Property Name -Filter @{"Name" = "^$([RegEx]::escape($strHostsClusterName))$"}).MoRef | %{
      $arrNumericSensorInfo = @($_.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo)
      # HostNumericSensorInfo for BIOS, iLO, array controller
      $nsiBIOS = $arrNumericSensorInfo | ? {$_.Name -like "*System BIOS*"}
      $nsiArrayCtrlr = $arrNumericSensorInfo | ? {$_.Name -like "HP Smart Array Controller*"}
      $nsiILO = $arrNumericSensorInfo | ? {$_.Name -like "Hewlett-Packard BMC Firmware*"}
      $nsiNXdev = $arrNumericSensorInfo | ? {$_.Name -like "nx_nic device*"}
      $nsiNXdrv = $arrNumericSensorInfo | ? {$_.Name -like "nx_nic driver*"}
  
    if ( $nsiNXdev.Count -gt 0 ) {
         $nsiNXdevice = $nsiNXdev[0].Name
    } else {
         $nsiNXdevice = "n/a"
    }
    if ( $nsiNXdrv.Count -gt 0 ) {
         $nsiNXdriver = $nsiNXdrv[0].Name
    } else {
         $nsiNXdriver = "n/a"
    }
  
      New-Object PSObject -Property @{
          VMHost = $_.Name
          "SystemBIOS" = $nsiBIOS.name
          "HPSmartArray" = $nsiArrayCtrlr.Name
          "iLOFirmware" = $nsiILO.Name
          "nx_nic device" = $nsiNXdevice
          "nx_nic driver" = $nsiNXdriver
      } ## end new-object
  } | Export-Csv C:\temp\Production-BLadeG7.csv  ## end Foreach-Object
  
  
  
  
  

  However, I would like to change the driver for the CARD and the version of the firmware but still appear.

  Any kind of help and suggestions would be greatly appreciated.

  Thank you.

  Try like this

  $strHostsClusterName = 'production '.

  Get-view ViewType - HostSystem-Property Name, Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo - SearchRoot (Get-View - Name ClusterComputeResource-property - ViewType filter @{'Name' = ' ^ $([RegEx]: escape ($strHostsClusterName)) $"" "}). MoRef | %{

  $arrNumericSensorInfo = @($_.) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo)

  # HostNumericSensorInfo for controller table of BIOS, ILO,

  $nsiBIOS = $arrNumericSensorInfo |? {$_. {Name: like "* system BIOS *"}

  $nsiArrayCtrlr = $arrNumericSensorInfo |? {$_. {Name - like "HP Smart Array Controller *"}

  $nsiILO = $arrNumericSensorInfo |? {$_. {Name - like "Hewlett-Packard BMC Firmware *"}

  $esxName = $_. Name

  $esxcli = get-EsxCli - VMHost $_. Name

  $esxcli.network.nic.list () | %{

  $esxcli.network.nic.get ($_.) Name) | %{

  $props [ordered] = @ {}

  VMHost = $esxName

  "SystemBIOS" = $nsiBIOS.name

  "HPSmartArray" = $nsiArrayCtrlr.Name

  "iLOFirmware" = $nsiILO.Name

  "nx_nic device" = $_. Name

  'nx_nic pilot' = $_. DriverInfo.Driver

  "nx_nic driver version" = $_. DriverInfo.Version

  "nx_nic firmware version" = $_. DriverInfo.FirmwareVersion

  } # end new object

  New-object PSObject-property $props

  }

  }

  } | Export-Csv C:\temp\Production-BLadeG7.csv # end Foreach-Object

• Have just been told by BT that I need a new/different version of Thunderbird to work with the new system BTMail (previously BTYahooMail) - I do?

  I have btinternet email for years and Thunderbird for too long and have been happy with both. Unfortunately, I'm not technical enough to understand the majority of assistance or instructions on the information pages of support technique/Thunderbird, but haven't managed to get TB put in place in the first place (long time) and it seems to have worked well since. However, on Friday both of my accounts to BT (sets of two numbers), so two BT email addresses have been moved new old BT Yahoo mail BT mail. I was unable to connect to one of them, but the other was very good - I have had help 'screen sharing' a technical chap BT to sort. However, he was able to Conect Thunderbird with email servers. I said to BT and the chap tech tried to sort on screen sharing, but could not (and I have been unable to follow what he was doing). A few months ago, I made a few changes, as requested by BT, to allow for the transfer to go smoothly (!), but the man has changed some things Friday, I think, as well. He could not solve the problem of TB and I can't figure it out at all, and the Lady of BT Tech help to whom I spoke this morning (and who had managed to fix my problem of connection BTID, fortunately) had a look and suggested that maybe I needed an update/new/different version TB or 'another email address. Well, I really want to stay with Thunderbird and was hoping that someone here could explain it in simple English for me, please? I was wondering what will happen, assuming that I need to download an updated version / different, if I did this and then sort of re-installed my existing BT email addresses (as if I started again with Thunderbird)? I hope that there is someone here who can help you - thank you - I'm rather fond of this little blue bird. Thank you.

  Hi, Zenos, thank you so much for your help - I have now (touch wood) have my email back after following your instructions. If all goes well, it will remain in operation during my upgrade to infinity next week.
  Thank you for taking the time to answer my question a little disjointed.
  Had never heard of before critical path, I thought that BTMail was BT Oh, well, as long as it works I guess (I hope it's better than the Yahoo system).
  Thanks again.

• the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  the new beta version that tries to be eliminated, everything is there and does not end when I aggree to install it. I'm on a Mac with OSX 10.9.3.

  HI sselden,.
  Thank you for your question. Currently the version that you are on the old version. The current version is 29 and the beta version is 30.

  I recommend you to install a new beta version or the more up-to-date. http://www.Mozilla.org/en-us/Firefox/channel/

• Calculator chart 50g. How can I find my firmware version? Thank you, johnnaben

  How can I find my firmware version?

  Thank you

  johnnaben

  I thank very much - the two methods have worked

  johnnaben