new firmware Fuze 1.01.01.22, no more "creat playlist?

Similar Questions

• New Firmware, id3 and ReplayGain problem tags

  I have problems getting a few metafields id3 showing correctly with the new firmware (1.02.26F).
  With the previous firmware, I used 'id3v2.3 + id3v1' type tag and it work perfectly, but with the new firmware it does not recognize the ReplayGain values. So I tried with id3v2.4, but now it does not recognize the metafield value type and with some files show strange values for track/Album Gain (e.g., dB-46 shows, 440, instead of + 3.56 dB. It is interesting-46.44 - 3.56 =-50; or dB - 48, 10, instead of + 1.90 dB. (- 48.1 - 1, 90 = mmm... okay, all mp3 files with track/Album Gain greater than 0.00dB show '-50.00 + realvalue'). If I play these files with ON Replaygain, volume will be very slow (as expected) and it is not possible to change the output volume (i.e., the output volume is the same what the Volume slider position is located, except in muted, which will cut.) I guess, because the gain is too important, volume slider to maximum is not enough to ensure that the output out of minimum volume).
  I mean, mp3 files with:
  -' id3v2.3 + id3v1' and "id3v2.3" types of tags, will not show Replaygain values;
  -' id3v2.4 + id3v1' tag types, does not recognize kind metafield.
  -the types of tags "id3v2.4", recognizes no Genre, artist, Album and title metafields.
  ReplayGain values - > 0.00 dB, will display an incorrect value.

  In addition, in the track info:
  -None of them show year;
  -List them all track number as xy, where x = TRACK number and y = TOTALTRACKS metafields.
  -Ditto for the number of the disk. XY, where x = DISCNUMBER and y = TOTALDISCS.

  I tag with foobar2000.

  In regards to the Vorbis comment, works perfectly.

  Does anyone else have this problem?

  Apparently there is incompatibility of all a rocket with foobar2000 mp3 QS.

  For the bug ReplayGain, Fuze will have problems reading the values with the "+" inside. I remove the workaround Nice '+' with Mp3Tag as shown here .

  This will also fix the value TYPE showing a minor issue "unknown."

  Date field still will not appear in the track info, although (zero size).

  Regarding the TOTALTRACKS thing, is how foobar2000 stores in id3 as explained here:

  [HydrogenAudio] Mapping tag foobar2000:ID3

  TOTALTRACKS: Stored in the same frame with TRACK number, separated by ' / ': for example "' 4/9.

  TOTALDISCS: Stored in the same frame with DISCNUMBER, separated by ' / ': for example "1/2 '.

  so Fuze displays the correct values, but it cannot show ' / '.

  Basically, marking with foobar2000 mp3 files:

  "ID3v2 writer compatibility mode" - ONE-> Fuze won't read ReplayGain values calculated by foob2000.

  'ID3v2 writer compatibility mode -' OFF-> Fuze will not recognize kind metafield.

• New firmware for Toshiba 39L4333DG

  Hello

  I'm new here. Could you tell me please when I can exepect new firmware on th TV?
  It's almost a year since the last update at the same time all of my local vod applications stopped work correctlly.
  A vod owner told me that you do not support DRM features that cause the app does not work properly
  (local names of applications are ELPI, player, vod onet)
  Rafal

  Hello

  I had a question for one of Toshiba TV games firmware, you'll make new firmware for either of the sets of TV from Toshiba?
  Or you just stoped doing this.

• New Firmware for the 32TL933 3D LED

  I found at this address 'http://www.dl.toshiba.com/DLY/index.jsp?region=GB&lang=FR', a new firmware for
  32TL933G (G for the other Europe).

  is it compatible with my 32TL933F (F for France)?

  Thank you

  Good question.
  If nobody here can offer you the right answer, I recommend you contact the France Toshiba service provider and ask them. They have direct contact with Toshiba France and can verify this information or perhaps send you a most recent and the most recent update for your Toshiba TV.

  By the way: you have problems with your TV?

• Camileo H20 - new firmware

  Hi, in my view must issue new firmware, which addresses the following issues:
  * - Files AVI unsupported-> avi is invalid *.
  * - Date and time display will not turn on *.
  * - There is no difference between PAL and NTSC settings (still 30 fps) *.
  * - Setting is reset after switching camera market (quality video, stabilizer, macro, flash,...) *.

  * Please, technicians and software developers issuing a new firmware that will fix the above problems

  Please other owners of this type of device, to join the discussion on these issues.

  Thank you very much
  Jirka

  Agree.

  Still more to add:

  -Secret function (undocumented) on firmware version (low pressing button more in combination with the wheel upwards at the same time) must be placed in the regular menu (say under menu of PARAMETERS such as the VERSION of the FIRMWARE.
  -Also autofocus (enabled/disabled) must exist in the menu
  -Combination of bottom more button and jog now could be used for manual focus adjustment (if auto-focus is turned off in the menu)

• New firmware for the required SSD THNSNC256GBSJ

  Can I get a new firmware for my model THNSNC256GBSJ s/n 51GB50HNK6LK SSD
  8.1 x 64 installed on my Windows System.

  To my knowledge, an update of firmware for THNSNC256GBSJ isn't available.
  But why are you talking about firmware update?

  SSD drive is recognized in the BIOS?
  If so, you don't need any SSD firmware updates to install Win'a 8.1

• 40VL733G - new Firmware - always 'low signal intensity' is displayed

  Model: G 40733
  Firmware: 10.1.59.6

  Hello!

  After installing the new Firmware the TV always shows 'low signal intensity', but the quality is good, nothing has changed.
  What can I do?
  Everyone has the older Firmware?

  You reset the TV after the update of the firmware?
  In the contrary case that

  Resetting must be done always after the firmware has been updated.

• I tried to upgrade to 9.2.1 new firmware ios but its not letting me. Can you help me?

  I tried to upgrade to 9.2.1 new firmware ios but its not letting me. Can you help me?

  What happens when you try to update? Put you to update over the air to help

  cellular data or by connecting the iPhone to the computer with which you

  normally the synchronization and using iTunes to do the update on this computer?

  If there is an error message, what is the exact

  full text of this error message?

• Toshiba 46TL838 - I need new firmware

  Hello

  TV: 46TL838
  6.0.08.1 worm.
  IM from Poland - Polish version /.

  My TV does not have to update the menu. IM connecting to the ethernet LAN

  I need minimum 6.4 version because in my sweet 3D option does not work on the USB key.

  I can guarantee to the tv and I have to take it to service support but I have a long way to the service.

  I'm surprised that there is no firmware on the Toshiba site. I was disappointed.

  Please help me.

  Hello
  Especially the firmware for all Toshiba TV European models can be downloaded from the Toshiba page
  http://www.Toshiba-OM.NET/firmware.php

  But for the two sets of series RL838/858 and TL838/868, you will need to use one of the following methods:

  * Method 1: *.
  _Automatic network warning

  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning

  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

• Need new firmware for the drive (Mat * un UJDA750)

  I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?

  THX.

  Hello

  I put t know why you need a firmware for your combo drive.
  As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.

  Good bye

• D7000 - new Firmware. 1.0.1.42_1.0.1

  Just installed the new Firmware and on the homepage on the tab Wireless he complains it isn't wireless security even if there isn't.

  I started firmware precedent (38).

  1.0.1.44 new firmware was released which corrected the error of wireless security message.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/31436

• Installation of the new firmware?

  How do we install the new firmware for NetGear WNR2200 of genius

  Concerning

  stab

  Here is a link that will show you how to do the update.

  http://KB.NETGEAR.com/app/answers/detail/A_ID/23856

  I hope this will help.

• KDL46V5100 and new Firmware

  I downloaded and updated firmware ER4.12 - E328 on my KDL 46v5100 connected to Frontier Motorola 7216 - 1 FIOS box via a HDMI cable. Sporadically, he loses the image and sound after the update. Before updating the firmware to ER4.12 - E328, everything was fine (I thought it would help distorted blocks in the image).

  Technical support told me to buy a new HDMI cable and it was no help. I had Frontier replace the FIOS 7216-1 Motorola box and I still have the problem. I checked with a Toshiba TV and also no problem with FIOS box. It seems that the new firmware has a problem with the Motorola 7216-1

  The software update may interrupt your HDMI input source. To ensure the proper functioning, we recommend to perform a full reset of your HDMI input source after completing the software update.
  Note: Depending on your configuration, you might have more than 1 source connected to your TV. This could be your cable or Satellite, Blu - ray, DVD or game system box.
  1 turn off the TV.
  2. unplug the power cord TV taking about 5 minutes.
  3 reconnect the power cable TV on the wall socket.
  4. unplug the power cord from the wall outlet HDMI input source.
  5. reconnect the input source HDMI power cord to a wall outlet.
  6. wait for the HDMI input source start completely.
  Note: It may take about 15 minutes according to the HDMI input source.
  If the problem persists, please contact our Technical Support team for assistance: http://esupport.sony.com/US/perl/suppor... KDL46V5100

• The new Firmware...

  Well... I downloaded the new firmware three times and it still doesn't work. What is happening is: I click on the icon (I put it on my desk), he asked me "do you want to run this file? I click on "Run" and the box that opens goes and nothing happens after that. He worked on the first download with my mp3 player. I have a Sansa clip and I had no problems with it until this week. What happened was: I turned it on and it works normally, it seemed, I chose my song, I wanted to listen to and carried on with what I was doing and then it off suddenly. I know that the battery was not dead because I had loaded this day here so I walk back and the Database "Refresh" came so I just went back for the song I was listening to - AND THE IT TURNS OFF AGAIN. So I try to turn it on, it going off, turn it on, it turns off. Finally, it no longer lights. Can I go online to do some troubleshooting to see what the problem was and I've saw that Firmware was supposed to help-so I did a security scan to make sure it was safe for my computer and started to download. As I said, the first time, I downloaded the software that it worked very well. But he said that I had to clear 6 MB of free space on my camera - I did everything what I deleted still shows up on my device so that I could not download the firmware, then I just gave up with it because I've had enough with it does not properly. Sansa never gave no problems so far. Is this the end for my mp3 player? I need to know if I can invest in something else.    Thank you.

  The original video had problems with bad Soldered joints on the battery terminal wires. Sorry to say, this is what it looks like happened to yours. If you are adventurous and handy with a soldering tip fine iron (or know someone who is) you can probably fix it.

  You can Google "dismantling the Sansa Clip" and find all kinds of Youtube videos and other pictograms on the way to get it out without damaging it and put it back together. Otherwise, I fear that it is ruined; transfer the files out of it (as long as it always connects to the computer) and get a new player, maybe a Clip + or Zip if you like the small size and as a bonus, these new players have a SC slot to expand memory.

• Problems with the new firmware

  New firmware called my books podcasts and mixed together books and podcasts.  Podcast alley section. Also fails to player.  Firmware has screwed my player. Need help please, I have a sanDisk Sanasa fuse + MP3 player and latest firm ware (today).  Thanks in advance.

  The first time that you access the books, it's confusing, but take a look on all small three points at the bottom of the screen after you type the central point.  This reveals that there are three screens partitions via slide to right or left on the touch screen.

  To navigate between the choices, some books with a single tap Center, then sweep right or left to go between Audible / books / Podcasts.

  Do you like the new LOCK feature?

  I just made the connection, your name reminds me of Benjamin Vandervoort, played by John Wayne, in The Longest Day.  He served with distinction in Holy Mother Church.

  Bob