New G770 does not start after installing Ubuntu

Similar Questions

• Windows Vista does not start after installing Linux OS

  original title: Windows Vista does not start after the installation of the Linux OS... Help!

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  I installed Fedora 10 Red Hat Linux on my HP laptop and now each time it powers on, I can't do vista windows at startup.  Goes directly into Linux.

  I need to get back to normal.  Any help would be appreciated.

  Hey Oscar Jose

  Download the correct ISO file and make a disk bootable from the link below

  Then use the Startup Repair option when you start from

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  or at startup press F11 to start the process of restoration of hp and see if you can reinstall vista from the recovery partition and place your machine, back to the way you bought

  warning you all data loss and 3 third-party programs that you have installed unless there is a non-destructive option in your hp recovery options

  Thirdly try to ask in a fedora forum to solve the problem, he has caused

  http://fedoraproject.org/

  Walter, the time zone traveller

• Computer does not start after installing a new graphics card

  I am owner of a HP Pavilion H8-1020 with a processor intel i7 - 2600 s Windows 7 and am trying to upgrade my Radeon hd 6570 to a Gigabyte AMD Radeon R9 280 OC. I improved my diet for a Corsair CX750 to meet the requirements of power and installed with number. After the installation of the new card, which as far as I can tell is well seated in the pci slot and correctly connected to the PSU, my computer does not start.

  System powers on, all fans of begin to run including the fans on the new graphics card, but it does not begin the boot process, no entry is received at my monitors, no light on the keyboard, my OS starts loading, I can turn off the system without the delay that will flow normally. Then I reinstalled my old graphics card and the computer started as usual.

  Now, assuming that the card is not DOA, which unfourtunatly I have no way to verify, and I'd like to see if it could be another problem before going through the process of restitution. I did some reading on the internet, which helped, but did not help for a technological neophyte like me.  Now, I know a few things that could cause this problem but lack the necessary skills to determine what question is making me. What I've read, these could be possible questions:

  1: my new graphics card is not compatible with my motherboard. It's something I know now that I should have checked before buying and something I should theoretically be able to do it now, but I am at a loss on how to do it. My card is compatible with my motherboard?

  2 could be a BIOS problem. I updated my bios driver with the version provided by the HP site. I am running FRIEND 7.16 05/10/2011.  And from what I've read it might have something to do with my bios to UEFI mode and I would need to go to a legacy mode so he can recognize a new device, is it true? I am extremely wary of messing with my BIOS settings for fear of bricking my system. How can I check my current BIOS settings are and what I should change and how would approach I change them? Will one of these changes affect my system if they are not what is not causing the problem?

  In addition to these issues, anyone know any other matter which may be the cause of the problem that I should look for? Thanks for any help.

  Hello @Eric_Z,

  I can see why you are having problems with your new graphics card, and to get to the fast response that your motherboard is not compatible with the new graphics card that you have purchased. And here's why.

  Your motherboard according to the page HP Pavilion HPE h8-1020 Desktop PC product specifications is the Carmel motherboard, which has the following expansion slots:

  • A PCI Express x 16
  • Three PCI Express x 1 connectors
  • A PCI Express Mini Card x 1

  As there is no version indicated for your PCI Express x 16 it slot means that it is version 1.

  Now, your previous graphics card was a PCI Express 2.1 x 16, which means that it was version 2 and compatible with your PCI Express x 16 slot on your motherboard. However, the new card is PCI Express 3.0 and will not work in your motherboard due to a compatibility break. While the technology is supposed to be compatible there are many cases where it is not, and I'm afraid that you meet one of these cases.

  I am offering an overclock.net article entitled: the final answer to the controversial compatibility of PCIe x 16 version. where your situation has been tested and examined.

  I hope this helps. Have a great day and thank you for display on the HP Forums!

• Computer does not start after installing new graphics card

  HP-envy h8-1503
  I7 - 3770 k 3.5 GHZ
  10 GB of Ram
  Windows 8.1
  
  I tried to install a new edition of diamond Raedon 7770 to replace my old 7570 and when I try to start the computer I get 6 long beeps and the power light flashes 6 times. Everything is plugged in right and the video card turns on. It will not be output to the screen tho and the computer does not start!

  I fixed it, the problem was the safe boot in my bios, when I disabled the system booted and worked perfectly since! Thanks for the advice tho!

• computer does not start after installing video card

  I, m new here so please bear with me.  I have a PC HP Pavilion Media Center TV (m7434n) I'm trying to replace the video card (Nvidia GeForce 6200SE with Turbo Cache) in. I am trying to replace it with a Nvidia EVGA 8400GS. I delete all the nvidia drivers, make sure that the pci-e card is used in the implementation. I have then to remove the old card and install a new one. When I try to start the computer, fans turn on but that's all.  There is nothing on the monitor.  The computer does not start. I replaced the power supply bestec 300 watts with a new antec brand 430 watt power supply.  When I reinstalled the old video card, the computer starts ok. I tried to replace the video card with an ATI Radeon HD5550 too and it's the same thing (the computer would not start), reinstall the old card and it starts up fine. Any help would be greatly appreciated.

  Gary,

  You may have a compatibility issue with the ATI HD 5550 and 2006 PC model.  I've seen other posts where ATI 5xxx video card did not work in older HP PCs.

  When you are referring to the installation of the older video card do you mean going back to the integrated video card?  Moving the video cable to the card installed?

  Install the NVIDIA 8400GS and connect the video cable. Now follow the instructions for clear the CMOS.

• Laptop does not start after installing vista sp2

  My Dell XPS 1530 stopped working after installing vista sp2. He gave me instructions for installation, step 1 of 3 and it went all that they way up to step 3 of 3 and said its closure and never came back...
  Please let me know, how to start the laptop.

  Hello GoogleGuru,
  Thank you for visiting the Microsoft Answers forum.
  Because your computer does not start until the desktop computer, we were able to try the system restore to a point before you install SP2.
  Thus, with the computer is shut down. Press the power button, then press on and press F8 until you see the startup options, and then it will give you the ability to boot to the last known good configuration. (select it).

  If this does not work, you can try to boot from the Vista DVD and use the recovery console to perform a restore of the system to another point in time.

  Post back with the results.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Creative Cloud Desktop App does not start after installing Mac OS Yosemite

  Hi all,

  I just updated my Mac OS to Yosemite. Now, Creative Cloud Desktop App does not launch and InDesign CC 2014 (10.1.0.71) crashes trying to find the Roman.txt file, I have replaced it with a copy of the TimeMachine when he worked in the Mavericks.

  I trashed the caches and reinstalled the same preferences, but it keeps on does not start.

  The rest of the applications (with the exception of InDesign and Creative Cloud Desktop app) do not work properly.

  All ideas will be welcome.

  Thank you!

  Mac migration (or Time Machine) do not work with the Cloud program activations

  Uninstall... to run vacuuming... Restart your computer... Reinstall

  -using the vacuuming after uninstalling and before you reinstall may help

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• New T460s does not start after initial reboot

  I have recommended T460s to a friend. Now there's a problem: after installation and restart (Win 7), it does not start. Seems to be to do something (welcome...) and that it is. After about 30 minutes of black screen and a cursor. Then she presses button / stop for 4 seconds, and welcome once again. He left for one night but no change when she awoke. What to do now? Reinstalling Windows?

  Everything seems to be OK now, it just took a little patience...

• Does not start after installing new video card

  Hello, I have a desktop H8-1284, and the video card went a few days ago. So I bought a video card Geforce GTX 650, and after installing the card and the computer starts, it hangs just at the start of the HP logo screen. So I put an old geforce 8800, and she starts without a problem. When I try the new card Geforce GTX 650, the same thing, just hangs at the splash screen.  I checked the bios and it doent seem to be something there that can help wouild. My diet is 460 w, and the new map needs of 400 w, any help will be greatly appreciated

  Hello

  Most of the cards PCI-E 3.0 are retro-compatible with the PCI-E 2.0 slots.  However, in order to get the PCI-E version 3, you must use a processor Ivy Bridge.  Look at these specificationsfor a typical NVIDIA GTX 650.

• Sir my network smart vaio does NOT start after installing windows 7 ultimate 64 bit

  Sir accidentally my real Home Basic 64-bit is formatted when installing Ubuntu 13.04 in a separate disk.

  I have no backup to restore the window as recovery is also formatted.

  I installed windows 7 ultimate 64 bit and all drivers related to it is on th website:-http://www.sony.co.in/support/product/sve15115en/download

  including the original software and driver patches.

  but after that my network manager smart vaio does not work its present only in the menu start when I clicked it nothing happens.it nevers opens.

  Please help me

  do a system restore disc. contact https://www.sony.co.in/section/contactus

• Siebel Server does not start after installing Siebel 8.2.2 (Linux): SBL-CSC-00025

  Hello

  I installed siebel on Oracle linux 6.1 8.2.2 x86_64, Oracle HTTP Server 11 and customer DB Oracle. I have an existing database on another linux machine.

  I have the connection with my database by odbcsql in the siebsrvr folder. Gateway is started correctly. When I run the Siebel server (. / start_server) it works very well for a few seconds and then dies with the following newspapers:

  SiebSrvr.log:

  
  

  1021 2015-03-08 15:42:49 2015-03-08 15:42:50 + 0100 000000a 9 001 09 0001 SiebSrvr 17947 1439700720 /u01/app/oracle/siebel/8.2.2.0.0/ses/siebsrvr/log/SiebSrvr.log 8.2.2 ffff [22314] ENU

  GenericError 1 00005a3354fc40f1:0 GenericLog 2015-03-08 15:42:49 (sccnmsys.cpp (1306) err = 2883609 sys = 0) SBL-CSC-00025: no value found in the bridge. The default value of the repository is used.

  GenericError 1 00005a3a54fc40f1:0 GenericLog 2015-03-08 15:42:49 (sccnmsys.cpp (1306) err = 2883609 sys = 0) SBL-CSC-00025: no value found in the bridge. The default value of the repository is used.

  GenericError 1 00005a3b54fc40f1:0 GenericLog 2015-03-08 15:42:49 (sccnmsys.cpp (1306) err = 2883609 sys = 0) SBL-CSC-00025: no value found in the bridge. The default value of the repository is used.

  .....

  .....

  GenericError 1 000053f954fd0cb4:0 GenericLog 2015-03-09 16:44:52 (sccnmsys.cpp (1287) err = 2883602 sys = 0) SBL-CSC-00018: internal: the value of demand has never defined by the repository of DRS or the backup store.

  ....

  ....

  GenericError 1 0000550354fd0cb4:0 GenericLog 2015-03-09 16:44:52 (sccitems.cpp (310) err = 2555932 sys = 0) SBL-SCM-00028: key not found 1 GenericError GenericLog 0000550354fd0cb4:0 2015-03-09 16:44:52 (sccconfg.cpp (2149) err = 2555932 sys = 0) SBL-SCM-00028: key not found

  ---------------------------------------

  And SrvrMgr.log:

  SBL-SVR-03005: no server connection string for Siebel component Siebel Enterprise (null) (null), (null) Siebel server

  -----------

  (When setting up Siebel server I had bit the same mistakes but configuration completed successfully.

  SBL-Gen-05004: Key is not found.)

  ----------

  I did the installation steps very carefully. Source: SiebInstUnix.pdf (roadmap for installation) and the configuration of the Siebel business with an existing database Applications

  Help, please

  That's ok. I found error messages that are similar to article ID 1151183.1. Check if the Siebel server starts after a reconfiguration of the siebel server.

  You can also attach your siebns.dat to review file if you wish. It should be available under the u01/app/oracle/siebel/8.2.2.0.0/ses/gtwysrvr/sys directory.

  Thank you

  WSiebel

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer does not start after installing vista sp2.

  When the computer is turned on it presents two options: start windows normally or start the system restart. If start windows normally is chosen, it just reloads the same screen, if launch startup repair, it tells me that it can't solve my problem and returns me to the same screen as well. F8 or help options advanced.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows does not start after installing sp3

  I had windows xp with sp2 and sp3, I downloaded. Once the download is complete it asked me to restart the computer. Windows will not go up. No error message, but it will work when the system is in safe mode. In addition, windows update does not load. Any ideas?

  You are a candidate for this patch before installing SP3...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&DLC=en&softwareitem=PV-60484-2

  .. you are if your PC is a HP Pavilion and Presario, Media Center and has an AMD processor

  To find out if you have an AMD processor...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Your processor type is shown in the computer: section (see below)

  You can do a restore of the system in safe mode to get rid of the SP3...

  http://support.Microsoft.com/kb/306084/en-GB

  Tricky

• Dreamweaver does not start after installed 'managed '.

  I get an error trying to launch a new installation of Dreamweaver. Error: "the procedure entry point? CheckIfPointInsideVector - blah blah blah - could not be located in the dynamic link library dvaui.dll"I have attached a picture of the whole error. This error has occurred, I uninstalled and reinstalled DW and got the error again.

  What should do?

  Fourth time is the charm. I uninstalled Dreamweaver, went to the program directory and delete the files in the root of the directory Dreameaver, done install it once more. Now he started. Not sure why this time is different, but that's what I was doing.