new generation is less in size that the previous generation (cannot display the build)

Similar Questions

• Why using the typewriter in acrobat 9 adds less file size that the use of the text of the comment in acrobat 11 tool?

  Why using the typewriter in acrobat 9 adds less file size that the use of the text of the comment in acrobat 11 tool?

  Two employees, one using acrobat 9 and the other uses acrobat 11. The two employees open a secure document one page 105 KB in size. Used using acrobat 9 using the typewriter tool to add comments. Document increases in volume to 137 kb. Second employee using acrobat 11 uses the comment add the text tool (since it is no longer a typewriter tool). This employee has to use tool once and the document immediately increases size of 105 k to 950 + kb. Why is this? What can be done to avoid this?

  As I suspected much earlier, the difference is in the fonts that are used for the text. For the smaller file, text annotation font is Times Roman. that is a policy that is essentially built into Acrobat/Reader. For the larger file, the font is Tahoma, which is not an integrated police force, which ends by happens so the entire police gets embedded in the PDF file. The size of this font on disk file is 681KO on my system (Mac), and it ends up taking more space when they are embedded in the PDF file. The same type of thing happens with form fields and this is done so that all characters in the font are available when the text is changed in a system that may not have the installed font.

  One of the problems is if you try to reduce the size of the file by changing the font that used up one of the built-in ones (Courier, Helvetica, TImes Roman), Acrobat does not remove the now unused of the file font information, if you do not get the reduction in file size that you can imagine, even if the font is no longer presented as being incorporated. I submitted this as a bug some time ago, but it has not been fixed.

• I had to reinstall Photoshop CS on my new computer but can't activae that – the link seems to be absent.   Can someone advise please?

  I had to reinstall Photoshop CS on my new computer but can't activae that – the link seems to be absent.   Can someone advise please?

  The software was purchased some time ago but now seems to have this problem - it works fine but there is a countdown has begun for 30 days now :-(

  Please ignore my stupidity - doh!

  It has been a while, but in my DVD collection, I found a more up to date version. tried and Bingo!

  Thanks for your efforts.

• Manager tasks less RAM indicates that the PC is originally.

  Today, I used my PC to download drivers for win 7 32 bits because I installed Win7 Ultimate on another PC, and I guess that something might have happened without me realizing... for example, if I thought I was downloading the thing, but was actually the installation on my PC...

  so the problem is that I have 4 GB of RAM, and the Task Manager displays now 2.6, when he showed generally 3.9 or more:

  

  Help, please! Thank you!

  Hi Kaloyan,

  Thanks for the detailed response.

  You use equal GB of RAM in two slots?

  Since your system showing usable to 3.9 GB memory is perfectly fine for 4 GB of RAM, because some are reserved for your video card memory as long with other resources of your PC.

  You want to keep the same size paired together in banks modules, if you do not, they will not work in dual channel mode. 2 x 1 gig in a Bank and 2 x 2 GB in another bank will operate in dual channel mode. If you put the memory of different sizes together in the same bank, like a 2 gig stick and a stick of 1 gig in the same bank, they will not work in dual channel mode. If you put a single strange stick of a bank on the slot 1, your memory will not work in dual channel mode.

  Hope that the information provided is useful.

• My IMAC froze this morning so I had to turn it off and when I turned it back on I got a new dialog box where it says that the Developer Tools Access needs to take control of another process for debugging continue and wants my password

  I do not recognize the information dialog box, and I have never seen this. So I don't want to give my password for changes to my IMac until I know what he does.

  Never enter your password to something that you do not recognize.

  Re: Strange dialog boxes popping up!

• My new HDD is damaged, I would that the instructions to remove the hard drive and install windows 7, so I can later install windows 8.

  Hardware failure on the disk.  Installer installed new drive and put it on Vista.  I have corrupted data and can not download the service pack 1 upgrade to windows 8.  Can I erase the hard drive and buy a cd for windows 8.  If yes how I wipe the drive hard and etc.  Thanks in advance, baildaily

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-8000ffff-unable-to-fix-need-advise/597003cb-e5a7-4198-8ae6-36cafe876005

• I tried to download PES 13 on my new Mac, but he tells me that the serial number is not good.

  I bought this download of Adobe a year ago, it was an upgrade to a Windows Machine.  Should what number I use?

  If you have purchased an upgrade you should probably the serial number of the previous version that you upgraded and that of version 13.  What is the message you see when you try and it breaks down?

• In the new update, I can't believe that the default Source range in the export settings went from the output sequence.

  Very very disappointed for someone who does a lot of export high speed it has great effect. Does perform a work around?

  Thank you

  Jeff

  If you have activated the workspace, it will be by default Source range: workspace in the export settings. Go timeline menu burger/wing tab, and clear the work area. Who will come back you to the Source range: in and out sequence in the export of parameters.

• Creating a chart that can scale up to the size of the window

  I have a project where I need to scale an image to the exact size that the window at any time. Is there someone who could help me with the code for this, I have never done anything like this before.

  Thank you

  Just reply - see my response in:

  loading an external swf for information and resize according to the browser

• Photoshop can change the size of the canvas for very accurate measurements

  I need the exact measurements for the size of the canvas that needs to be 704,55 mm wide. I noticed that when I create a new document and insert this size for the width of the document it takes 704,51 mm if I check the size of the canvas under Image > canvas size. No explanation as to why it changes the size of the canvas to very exact dimensions?

  Thank you

  An image cannot be fractions of a pixel. Imagine that you have an image that has a resolution of 3 ppi. It's less than an inch to 3 pixel image. Now, you mean a size of 0.5 inch canvas. This would mean an image composed of 1.5 pixels, which is impossible. The image must be rounded to the nearest one who welcomes a whole pixel. You can either simply decide that it is good enough (it is usually), or use a resolution so that the size of your canvas has more pixels that can be divided into your desired size, then maybe you can be able to adjust your resolution exactly to the size of your canvas.

• Want 4500: I get a message saying that the "the printer is not connected.

  I just bought a HP Envy 4500 all in one printer.

  I can't print to it without having to restart it every time.

  I get a message saying that the "the printer is not connected.

  I can access the built-in web server, so I am sure that it is connected.

  It seems that he is going to sleep but cannot be awoken by activity.

  I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

  The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

  I uninstalled and reinstalled the printer.

  The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

  If I try to scan I get an error-9923

  Hi @jpkeates,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

  Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

  Make sure that the multicast is supported

  If you use a wireless network, make sure that muticasting is supported and enabled on your router.

  If the new connection is working, you know that the printing problem is tied to the computer.

  If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

  Disable IPv6 (network connection)

  Disable IPv6 on the printer to make sure IPv4 is used on your network.

  If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

  If your printer does not display, use the built-in web server (EWS) to disable IPv6.

  From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

  NOTE:

  If the Web page appears empty, try another Internet browser.

  Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

  Select enable IPv4 only (or similar).

  Figure: Configuration example IPv4 using an integrated Web server

  

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide and help the steps!

• New virtual local network not accessible from the vpn

  Cisco ASA 5510 helps static routes.  I created a new vlan internal and added the path correct for the ASA.  Internally the vlan is fully accessible, but when I connect to the VPN I can't communicate with the systems in this regard.

  The access policy dynamics and associated ACLs are fine. A system related to this policy, but not on the new VLAN is accessible through this policy.

  What Miss me?

  Hello

  Please let us know what kind of tunnel are you talking about:

  1 lan to lan tunnel

  2. site of tunnel site

  You must ensure that the new VLAN is part of the interesting traffic and nat is free.

  Add the new vlan interesting traffic will ensure that the tunnel is trigged for the new VLAN.

  Do the new vlan a part of nat exemption ensures that traffic is through the tunnel and natted not routed to internet and so lost.

  Also you can check if the program and for the tunnel decaps multiply or not when you try to move traffic from the new VLAN. You can check which form the "sh cry counterpart his ips."

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please mark this thread as answered, if you feel that your query is resolved. Note the useful messages.

• IE cannot display the page

  Got a stumper.

  Whenever I open my browser, via ISP or directly to the icon on the desktop, opens the site but just below the URL component is a 'block' that says Internet Explorer cannot display this webpage. Below that is my url w / her ISP. (see attachment)

  Why is this appearance? Have no problem to access any internet site.

  Just curious.

  

  Why is this appearance? Have no problem to access any internet site.

  Just curious.

  boong

  Hello boongsong, I can see the picture now. I see that you're talking about.

  Here a link to Microsoft that may have a fix for the problem. It's worth a try. If Mocrosoft cannot solve it, we can do a bit of research on the question, but I suspect it is perhaps that the Internet Explorer settings may try to block some sites and have a problem to do. I've not seen this before.

  I have Norton, but I cannot in my Internet Explorer or one of the other toolbars. It's just a personal preference, which makes the screen too "busy" to me. I also remove all other icons in toolbars that I don't use. But again, this is just a personal preference.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.

• Impossible to display the Windows Firewall GET an error due to an unidentified problem, Windows cannot display Windows Firewall settings

  OP: Problem with Windows XP service pack 3__ firewall settings

  When I try to view the settings of the firewall, a dialog box appears saying "Due to a problem not identified, Windows cannot display Windows Firewall settings".

  I read a thread on a file to merge with the registry of XP SP2. I did not like I do not know if it would work with SP3? or should I do something else?

  In addition, why is that happening? What is the problem with the Windows Firewall? If this has happened for some time is a Microsoft patch that can be downloaded instead of trying to make mergers of registry (I'm not very happy to do).

  Thank you

  "See if it's the same window that you see - Windows cannot display Windows Firewall settings" error when you access the firewall settings in Windows XP
  If this is the case, then follow the steps put in place for Solution for case 1: MowGreen Expert from Windows IT Pro - consumer safety