New gifs, need help...

Similar Questions

• New user needs help with the creation of an animation :)

  Hello

  IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

  I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

  Would appreciate any help!

  There are several ways to do so.

  One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.

• new user needing help

  Hello world.

  IM new to this so please be gentle. I have a motorola milestone (1 week) on orange. I had to get orange to set the phone so I can get on the internet.since this is a screen of motorcycle car always comes when I press the home button. Any ideas that it is and how to stop the it.also I can't disconnect from the internet, unless I turn off the phone. I also have a htc phone and it simple to turn off the internet but cant seem to find anyway to do this on the milestone.

  any help that anyone can provide will be much appreciated

  The Milestone is intended to be a 'cloud' device and therefore will be always connected to the internet (if you have the settings configured properly) unless you use an application that disables voluntarily for you. In general, it just means that any application that needs to connect can, without asking, and e-mail can be collected - again without notice to you. If you are on a package data unlimited so this isn't usually a problem.

  If you really want to "disable internet" then something like APNDroidworks by activating / disabling your internet settings between known States, good and bad. For the user what that means is that you have a button that you can put on a home screen that will switch your internet enabled or disabled.

  I don't know what OrangeWorld is or is - that you just want to say that when you start your browser you end up on a page called OrangeWorld? If so, is it as simple Orange to configure your browser so that the homepage is OrangeWorld?

  As for your home main problem is weird. I assume you mean the key 'home' of material and not a button on one of your home screens? As someone has said, the only ways, you should see the car home are either by the presence of a magnet near the rear of the case or by running the application of the "motorola car home."

  If you use a carrying case for your phone, make sure it does not use a magnet for keeping it closed, and if it is use a magnet to take the phone out of the case and try again by pressing the home button.

• I forgot my admin password need to install the new program need help please.

  I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

  I forgot my admin password, have tried several times but don't remember. I need to install a new program as soon as possible and need assistance please.

  Sorry, we are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Suite Adobe CS5 - purchase new macbook, need help

  Currently, I have a macbook pro 10.10. It runs very well my suite adobe CS5. But my computer is getting old, runs more slowly, and I want to get a new.

  I don't want to have to buy more adobe, or switch to the cloud.

  I received after 5 years of my college. This is why I don't have an invoice or a receipt.
  I need a new code / find my serial number to install the same programs I ALREADY HAVE on my new computer.

  I tried to talk to chat online with no help reps.

  Someone help me please.

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  Of course, your CS5 probably won't work on a new computer

  CS6 and previous programs have not been tested and will not be updated to run on El Capitan Mac.

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• new Member needs help, reload Programs window 8 and origanal Acer Iconia W700 in

  I messed up my computer by installing windows 8.1 and everything went.  No keyboard more, Acer ring etc.  I want to just this 'thing' to the way it was.  It didn't go back or restoration available and do not send a set of discs, although I have a portable hard drive that might work, if there is such a thing as available backup discs.  Any suggestions would be greatly appreciated.  Do I have to send this thing to the manufacturer, is it a seller out there that makes this service, etc.

  TKS

  Hi JHRolfe

  When you say ' it didn't go back or restoration available "do you mean there is no recovery partition ("eRecovery")? If you restart your machine & press logo Acer ALT F10 & - this should take you in the eRecovery mode where you can restore your computer like new.

  If your keyboard has stopped working, see if you can borrow someone's USB keyboard and try from there.

  If all else fails, then Yes, you will need to send it for repair. Chat with Acer for your area by going to the Web site, click on "support" and then "contact Acer".

  Good luck!

• A2107A new user needs help with a new media player

  Hi please can anyone suggest a good player to install on my Ideapad A2107A as a built-in custom plays several popular formats such as MKV and some others.i have installed free VLC Player, but I use potplayer on my PC which is excellent and will play all formats, I need... only it is not listed in the application listed , but only "DAUM" is (responsible for the coding of potplayer) I need to use the player in the Portugal where access to broadband is not very good... I'm going on vacation that's why I bought my Lenovo... Thanks a lot for all the help on this topic

  Hi, adrian631330

  Welcome to Lenovo community Fourms!

  I think you can see this Post.

  http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/A1-the-best-video-players/m-p/648187/highl...

  You might just find the right App for you!

  Hope this helps,

• new user needs help to start

  I am a new buyer/user of lightroom 6.  I installed but don't know how to start.  Anyone can guide me please thanks to start-up?

  Hi Alain,

  Please see tutorials. They are the best way to start with any product.

  Lightroom tutorials | Learn how to use Photoshop Lightroom

  Photography: Where to start | Adobe Photoshop Lightroom CC tutorials

  Learn Lightroom 6 / CC - Episode 1: Quickstart - YouTube

  Hope this helps

  ~ Assani

• VM Workstation new boy needs help!

  Hi everyone... first post so be nice...

  I'm trying to set up a unified base cluster Communications, I'mon the first server and I amtrying to get the job of network... I have install VMNet2 to bridge with a spare part nicon my desk so I can connect to the cluster for the world outsideand I need to configure DHCP on the network, but whenever I go settings DHCP it forces me to use a 192.168.255.0 subnetand I can not change it... any ideas? No one has experiencein general implementation CiscoCall Manager 6.0 or higher to help VMware</span >?

  Thank you all...

  Rich

  The bundled with VMware DHCP server does not provide DHCP addresses NAT and host networks only. The idea with deck is that it will get an IP address from the DHCP server on your local network or you use a fixed IP address, as is the case of a physical machine on the same LAN segment.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• I'm new. Need help with subforms

  I followed messages and figured out how to use the buttons to add and remove subforms, but I want subforms to add when the button is not the end of the list.  Remove the work this way, but I did not add to the work. Any help would be greatly appreciated.

  You will need to do it in two steps. .will add it (put it down) then do a moveInstance.

  Paul

• New flash need help

  OK Ive been doing a lot of tutorials, but none seem to cover my problem although some helped they gave me enough knowledge to only dig my hole deeper. I've done a Total Training CS3 essentials and a bunch of stuff from Lynda.com too.
  
  All I'm trying to do is make tutorial videos for new employees. I want to build using a Flash interface.
  
  All I want to do is a main screen (which I can build) and from the main screen, you select the thumbnails of each video. Each thumbnail opens a specific. FLV FLV Player, and when its done the FLV player closes and return you to the selection screen (that's the problem).
  
  How to set the button to open the FLV file?
  
  Can I import the file to another layer and place it on the timeline or should I do in sound in the SWF, and then refer to it from the button?
  
  How to close when its actually play?
  
  Any help would be appreciated.
  

  Well here is the answer,

  Player._visible = false;
  Button1.onRelease = function() {}
  _root. Player._visible = true;
  _root. Player.Load ("8.flv");
  _root. Player.Play ();
  }
  Button2.onRelease = function() {}
  _root. Player._visible = true;
  _root. Player.Load ("10.flv");
  _root. Player.Play ();
  }
  * button3.onRelease = function() {}
  _root. Player._visible = true;
  _root. Player.Load ("3.flv");
  _root. Player.Play ();
  }*/

  var listenerObject:Object = new Object();
  listenerObject.complete = {function(eventObject:Object):Void}
  _root. Player._visible = false;
  };
  player.addEventListener ("complete", listenerObject);

  Stop();

  Once again, 3Dbuzz.com came to the rescue

• new Member needs help

  Hi all

  IM new here

  I just want to ask

  My acer aspire v5 - 572 g temp is 53 degrees C when idle

  is this normal?

  When I play with her, elevation of the temp up to 80 + degree C

  any solution?

  50-58 degrees seems to be a standard of operating temperature.

  BIOS version 2.06 is the more up-to-date version.

  I think that you are well and everything goes well with your laptop

  In my view, it will not be stopped unless you go over 104 degrees.

• New user needs help: pattern buffer!

  Hello. As I am a new user on cs6, I have a little problem. When I use the stamp tool to ground that each model is black and white that it even used to be colorful, so how can I change it back?

  By any chnce is your document in grayscale mode?

• New guy needs help menu added...

  Thanks for any help.  I figured out how to create a title page with scenes, but how do I associate with the movie? I created a movie with a video file in PE8 and I created a title page with the scenes, but when I play the movie in Windows Media Player or similar I do not see the page of the scene. How to combine the two?

  If you burn it to disc or burn to a folder and then use an app. burning like ImgBurn do physical blight in the VIDEO_TS folder, you are right. This disc will play in a DVD player connected to a TV or a DVD player on a computer, with good DVD playback software.

  In the Meadow, this DVD is that you are seen. If you share/Export as an AV file, navigation and all the Menus are not included.

  Good luck

  Hunt

• New owner, need help!

  I played with touch screen quick who took a bunch of stuff on my home page. How can I get them off?

  I think you do a long press and then drag them into the trash can that appears at the bottom of the screen.