new hard drive and RAM where and ££

Similar Questions

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• Bought a new hard drive and installed Windows 7. I then installed the old hard drive XP in a different machine and now I am told to reactivate Windows XP.

  Bought a new hard drive and installed win 7 to him to replace my old hd in xp. I then installed the old hd in xp to replace a system running under win2k, but I was prompted to save it. can I use the old license key that accompanies the xp or should I get a new license?

  original title: Win2K to XP

  Registration and "Activation" are two different things, registration is not required, the activation is and if the road that has XP on it done from another computer and a "Retail" version, then you will need to activate by phone using your existing product key.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Having trouble installing new drivers after installing a new hard drive and Windows Vista.

  I just installed a new hard drive on my computer of dell inspiron 1525. I managed to do it and it worked. I had a disc from dell to reinstall windows vista edition Home premium 32-bit and had drivers and utilities dvd. However I couldn't connect to the internet. I understand I'm missing some drivers but I rebooted the computer, but it goes to the black screen asking you to start in safe mode, safe mode with network, normally and something else. But after trying all of them, it goes straight to this same screen. What can I do? Or I can clear the new hard drive and start over? Any ideas?

  original title: new installation from hard drive problem

  Hello

  I suggest that you run the Startup Repair tool and check if it solves the problem:

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I suggest Download driver network card on another computer, and then transfer the file using any flash drive and even install in the computer you have challenged.

• My hard drive is damaged. I got a new hard drive and now I want to reinstall Windows. Can I use my existing product key?

  original title: my hard sucks

  my hard is damaged in some portion.can, I changed the new hard drive and reinstall Windows vista with the existing product key?

  Hello

  Yes, you can reinstall vista with your product key on the new hard drive

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  Here's how to do a clean install of Vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACKUP MY DATA

  I INSTALLED A NEW HARD DRIVE AND FORGOT TO BACK TO THE TOP OF MY DATA IF I DON'T REMEMBER MY CODE TO SECURITY/PASSWORD OF THE WIRELESS ROUTER

  You need to reset your wireless router if you do not have access to it to retrieve your security code.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  See you soon.

  Mick Murphy - Microsoft partner

• HDD problem IBM Thinkpad T42. I can't install NEW Hard Drive and NEW OEM Windows XP?

  Hi all

  When I turn on the notebook Windows XP starts up and everything is loaded. But after 5 or 10 minutes, the response is very slow. If I click on any window and try to open any folder, or open internet explore it takes about 1 or 2 minutes to respond. I tried several ways to scan disk and Defrag, but still that are of no use. I also tried 'Difficulty automatically File System Errors' and ' will search for and attempt recovery of bad sectors ", but this problem is still there. Even when I stop it takes too long to stop about 15 to 20 minutes.

  When I turn on again NEXT DAY Windows XP starts and everything loads quickly. After 5 or 10 minutes, the response is very slow. This problem occurs for a few days.

  I then used "IBM Rescue and Restore" to load fresh operating system. Still the problem does not get fixed.

  Can you get it someone please let me know if this is problem of hard disk or something else. I'm guessing it's related to the hard drive.

  If it is the drive hard problem how to save (clone) of this old hard drive AGAIN DISK (after buying) HARD.

  If I buy the NEW HARD DRIVE and CD/DVD of NEW OPERATING SYSTEM OEM VERSION it will work? Do existing mother board ALLOW to load a NEW VERSION of OS OEM?

  Thank you

  Contact the manufacturer of your computer, IBM and ask them to send a recovery disk/s XP set.

  Normally, they do this for a cost of $ small.

  Buy a new hard drive > Reinstall.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Hard drive crashed with CS5 on it. Has not been disabled before the collision. Desktopcomputer again loaded on the new hard drive and bu news updates do not work on the new computer.

  Hi, I hope I'm in the right forum! I have a laptop Aspire with Photoshop CS5 extended. The computer's hard drive crashed and so I had to get another hard drive! Obviously as the hard drive crashed, I was unable to disable CS5 extended before the crash. I have it charging on the new hard drive and in the meantime bought a desktop computer in which I loaded CS5. Updates have been working fine on the laptop. I tried to update the program on the new computer, but continue to receive error messages. I have read in any problems and think maybe computer laptop harddrive that crashed had CS5 yet on it, as I was unable to turn it off because I didn't know he was going to crash. I am only able to load CS5 on 2 computers and if it is still on the destroyed hard drive so I'm not able to turn it off and so I presume that is why I can not download the updates on my new computer. I hope someone can help me. I want to keep CS5 on both computers. Thanks in advance bunch Kara

  If you see excessive activation anomaly of counting, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an account reset activation.

  If you receive a different error, what exactly is this error?

• How can I reinstall Photoshop elements 7? I have the numbers series but bought 6 years ago. I have a new hard drive and the original link to reinstall but it doesn't work.

  I have a new hard drive and you want to reinstall Adobe Photoshop Elements 7. I know it's old but it works well for me. It of there in my orders with the serial number, but what do I do next?

  Buy a new, more up-to-date Photoshop elements?

  All the stuff sounds really complicated cloud creatives and seems very expensive.

  maureenart wrote:

  I have a new hard drive and you want to reinstall Adobe Photoshop Elements 7. I know it's old but it works well for me. It of there in my orders with the serial number, but what do I do next?

  Buy a new, more up-to-date Photoshop elements?

  All the stuff sounds really complicated cloud creatives and seems very expensive.

  Try to download from here:

  Download Photoshop Elements products | 9, 8, 7

• I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking

  I just installed a new hard drive. and reinstalled a clean copy of Windows 8.1.  Windows 10 waiting to be installed. I have licensed copies of Photoshop CS6, Lightroom 5 and 12 elements with Acrobat Standard. The Adobe programs are now asking to be uninstalled and reinstalled I can understand. However, should I do before moving on to Windows 10?

  Yes

• I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  I tried to reload a CS3 program previously downloaded on my new hard drive and this is the message when I click the English link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

  Make sure you have cookies enabled for your browser.  Try using a different browser if the problem persists.

• HP G71: Install the new hard drive and the raw copy

  Hello

  My HP G71 is 64-bit, 4 GB RAM and hard drive WD320BEVT. The laptop has more than 5 years of service and I want to replace with a new hard drive while performing a raw copy of the current. I have a dual boot Win 7/Ubuntu installation I want to keep on the new hard drive.

  As I have not found a new HD of the same type and capacity, I would like to replace the current one with an another Western Digital 2.5 ", the IDE interface, but with a capacity of 0.5 to 1 TB (I choose one or the other).

  My questions:

  -can I install one of these hard drives on this laptop? They are compatible with the current BIOS/chipset?

  -If I make a raw copy of the 320 GB drive to the 0.5 or 1 TB, how would the current operating system partitions will be reflected in a higher capacity drive?

  -J' bought an IDE/USB interface adapter as well as to make possible the raw copy, could you recommend, if these questions have the THUMB, a good free to use software that I could use?

  Thanks for your help!

  Yes I use Kubuntu and tried several times to just the entire disk image and it does not reproduce partitions Linux and Grub, but when you try to start Linux it will hang and say can not find the prior specific hard drive. So now I just make a backup of Windows and reinstall Kubuntu from scratch. Much easier. I think there are also Linux backup programs you can use, but never really saw the need.

• New hard drive and try to reinstall the OS. Have discs of Hp recovery but fell in DVD player

  Hi all,

  I just put a new hard drive in my HP Dv7. I also ordered recovery disks. When I tried to put the disc in I discovered that my DVD drive is not working

  My question is can I transfer the recovery on a USB disk and then from there?

  I would be grateful for any ideas!

  Thank you in advance,

  Marc

  Don't know where you live, but any reputable computer store such as best buy, Staples, or even online at Amazon.com

• Desktop a6530f Pavilion, new hard drive and upgrade to Windows 7

  I have a desktop Pavilion a6530f with Vista.  My hard drive has been the production of errors, so I bought a new hard drive.  The original hard drive works pretty well as I should be able to create a recovery with a usb flash drive media.  I want to install the new hard drive (Seagate 1 TB SATA 3), and then install Windows 7 upgrade on the new drive.  Will be the ASUS M2N68 - LA / Narra3-GLBE motherboard supports SATA 3 (SATA 2 pilot courses)?  If Yes, where can I get the drivers?  Is there a Web page on the HP site for upgrade to Windows 7 on a new hard drive?  Or I just follow the guests after boot of the Windows 7 upgrade disc and enter the code of Vista product from the label on the side of the PC?

  Here are the specifications of your desktop HP Pavilion a6530f. Based on the specifications, this model shipped from the factory with Windows Vista Home Premium SP1 64-bit installed. This model supports the use of disks SATA 3, however transfer speeds will be limited to the rates for the motherboard SATA 2. No special drivers are required. Seagate 1 TB SATA 3 drive should work fine on this computer, but you may have problems using your HP recovery discs if the new drive is a Format "Advance" AF drive.

  It is unlikely that you will be able to create a recovery media on a USB FlashDrive with this computer. In my view, that this model only supports the creation of recovery DVDs.

  You have a choice of a couple of paths when it comes to the installation of Windows on your computer with a new hard drive installed.

  (1) use your HP Vista recovery disks to install Vista... This may or may not work depending on the new hard drive installed. Then, upgrade to Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Note: the key of Vista with Windows 7 will not work)

  (2) If you don't mind losing the "value-added" software HP originally installed on the computer, you can install Windows 7 without using Vista installed first. Install Windows 7 using the upgrade disc and the Windows 7 product key printed on the certificate of authenticity provided with the Windows 7 upgrade disk. (Do not enter the key during the installation of the window) (Note: the key of Vista with Windows 7 will not work)

  In both cases just follow the prompts as needed. I suggest to use Windows 7 SP1, because it seems to be more compatible with the new material, including readers of the AF.

  Please see HP - upgrade to Windows 7 customer care using basic upgrade or install Windows 7. Please see HP Forum - how to install Windows 7 without the disc for useful information and download for Windows 7.

  Please send Bravo

• How to install Win7 on new hard drive and still access all the files from the hard drives of previous Vista?

  I currently have a Windows Vista PC. It has two SATA drives, one with the operating system, the one I use for storage.

  I want to buy a new SATA hard drive and install a new copy of Windows 7 top.

  I want to know the steps to follow to do this. My plan is this:

  1. turn the pc power off and open the case.

  2. remove the old hard disks

  3. plug the new empty hard drive

  4. turn on the pc and the insertion of the disc to install to Win7 for DVD-ROM drive

  5. enter in the bios and put the DVD-ROM as first boot device

  6. install win 7 on new hard drive.

  Is this correct?

  Because my next question is important:

  7. Turning off the computer.

  8 reconnect the two old hard drives. New total number of SATA drives connected = three.

  Now when I restart the PC and login to Win 7, it lists two other drives as, for example, D:\ and E:\ readers?

  How can I make this work?

  Thank you very much!

  Thanks for your reply, but I don't want to dual boot. I just want to have the hard drive as the master drive Windows7 and the old two drives as slaves, where I can access files as the pictures and letters.

  Any help would be appreciated!

  Well, I would disconnect all drives hard current interns, then connect the new hard drive, reinstall Windows 7, re - attach the old readers as slaves and copy all the data you need to on the disc of Windows 7.

  See:

  How connect a SATA Hard Disk as a slave . eHow.com
  Single, master and slave drives and Jumpering

• Question Equium L350 - 10L new HARD drive and recovery

  Hi all.

  My L350 - 10L has a HD death. Just does not start. I tried the HARD drive recovery system, but after it formatted the HD I got a message saying that the image file is corrupted. I removed the HD and connected to my desktop to save personal files (before I tried the recovery) and there were real issues reading the disc. I got most of the documents & E-mail eventually (had to run a lot of check disk runs using a 3rd party disk partition software). I think that the drive is actually physically damaged somehow.

  I'll need to buy a new set of Toshiba recovery disks (too long a story to explain, but it's basically my fault), but my main question is this: if I buy a new HD still recovery disks to restore my system to its original state even if it isn't the original HD? There, I guess I mean will the recovery discs recreate the 3 partitions - WinRE (Hidden), Vista C: and D: data and set the correct boot and information industries? And I suppose that a secondary question who would be the HD should be the same size as the original one (120 GB said / 111GB actually)?

  Thanks in advance.

  Post edited by: GrumpyTrucker

  Hello

  > Over there, I guess I mean will the recovery discs recreate the 3 partitions - WinRE (Hidden), Vista C: and D: data and set the correct boot and information industries?
  The Toshiba Recovery disk will define the laptop (and HARD drive), the factory settings.
  This means that the recovery DVDs will format the whole HARD drive and it will create the partitions and all the rest as on the first day of purchase.

  I hope I could bring a precision...