New hard drive installed Vista Ultimate, now I can not install my printer - why?

Similar Questions

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Satellite P750 new HARD drive installed - what do we do now?

  Satellite P750 new hard drive installed as directed assistance of toshiba video suite of crush hard drive.
  What should we do now please help?

  Now you must install the Windows System.
  You have a Toshiba Recovery disk?
  Have you created one in the past?

  If you have this disc, insert the disc recovery and boot disk (press F12 and choose ODD as boot device)

  Then follow the instructions on the screen

• New hard drive install OS

  I have the original Vista OS on my desk m9452p.  IM is about to install a new hard drive.  Vista doesn't let me start dvd via the Recovery Manager.  Is anyway that I can get around that, if not I have no way to load an operating system on my new hard drive.  The former there is also a factory recovery disc recorded in it.  Is that I'm screwed and a new OS.

  The intent of the recovery Partition is to reinstall the operating system as it was from the factory.  For Vista, which won't be a HUGE back.  Are you sure this is what you want?  This means that all the updates and everything you've added since then (when you first started the computer, when it's new) will be lost.  If everything works with the old hard drive, I would use a cloning software to make the new drive hard all along with the former.  This way, everything is kept.  If you mind not to return to the "cool facorty" PC then use the set of recovery DVDs that you made when the PC was new, or make one now.  See HERE

• I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive. He is now not letting me turn it back on.

  original title: activation problem

  -I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive.  He is now not letting me turn it back on.  What should I do?  I don't want my computer or Microsoft thinks I use a version of Windows

  It is Windows 7 Home Premium, and I my here in front of me activation code.  But it is to say that it is not valid.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

• I recently had a new hard drive installed in my 2008 iMac. I'm trying to re - install office and the computer does not recognize my password. I tried all the passwords I can think of and nothing works and it wont let me continue

  I recently had a new hard drive installed in my 2008 iMac desktop computer, because right now I can't afford a new computer.   I am now under OS X El Capitan 10.11.4 and my password no longer works so that I can reinstall office microsoft for Mac.  I'm trying to change my password, but you must enter the old password and it does not recognize the password.  I tried every password I use and nothing works.  How can I change or get a new password?

  Reset the password.

  OS X 10.7 Lion, Mountain Lion, Yosemite 10.9 10.8, Yosemite 10.10 and 10.11 El Capitan

  Shut down the computer.

  Start the computer, and then press on and hold the command key and the R key to boot from the recovery partition.

  When you see the Apple logo, release the keys.

  Wait until the OS X Utilities window appears.

  Move the mouse pointer to the bar menu at the top of the screen, click on "Utilities" and select "Terminal".

  in the menu dropdown.

  Terminal window is displayed.

  TypeRegeditdans resetpassword and press enter on the keyboard.

  Reset Password Utility window will open.

  Leaving the Terminal.

  Select Macintosh HD, if not already.

  Select the user account in the menu popup box under "Select user account.

  Enter a new password.

  Re-enter the new password for the user.

  Enter a hint.

  Click on the Save"" button.

  Click  in the menu bar, and then select restart.

  Open a session.

  When Keychain dialog box appears, select "create new keychain".

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• I got a new hard drive installed in my laptop. The difficulty to reconnect my printer.

  Recently, my computer crashed and I had to have a new hard drive installed.  When she came back to me I found that my printer to be connected to my laptop.  I tried to use the disc that I used when I purchased the printer.  But now, with this new hard drive, I need to connect to the printer to my laptop once again, and I have a problem that I can't fix it.  Please can someone explain what I need to do?

  Thank you.

  From Internet Explorer

  Original title: I got a new hard drive installed in my laptop. I need to reconnect my printer with my laptop - problems with this. Help, please.   

  Hi Jessie,.

  Unplug the printer first. Insert the Driver CD for the printer. install by clicking on Setup. continue when asked to connect the printer and connect the USB cable to the laptop. There is not any question...

• How to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7

  Original title: window 7

  Hi can one tell me how to get a product key, that I had a new hard drive installed in the computer shop and it seems that there is no key for windows 7, I just brought Office 2016 and he did not finish the load down with the windows key 7.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• I had to get a new hard drive installed on my computer dI had to get a new hard drive installed on my computer, how do I reinstall Creative Cloud? o I have reinstall creative cloud?

  I had to get a new hard drive installed on my computer how can I reinstall the creative cloud?  Do I first have to use the trial version?

  Hi Robin,

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• installed a new hard drive install vista and full custom

  I bought a new hard drive for my laptop and I tried several times to re - install windows vista, I have not yet defined a partition, but I don't think that should affect the initial installation. I can get windows installed the first reboot and after it goes to a screen installation complete and remains on for about 20 minutes, after that I get a black screen with a cursor. I'm clueless as to what is the question.

  Hello

  You can't push Dell by providing Microsoft DVD

  but you can ask

  all they do is provide you with a way to reinstall vista, they have done

  HP is one that you hear about with replacements parts not OEM

  This is Dells use this DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  ________________________________________________

  or borrow a microsoft vista dvd. not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ________________________________________

  and try the Dell support forums

  There have your same problem

  http://en.community.Dell.com/support-forums/default.aspx

• New HARD drive installed. Where can I get Vista installation disc?

  Laptop of my son DV6404CA hard drive needs to be replaced. I ran the test HHD and it failed. My question is since the laptop never came with an installation disk, how to get windows Vista reinstalled on the new HARD drive.

  Thank you. The f

  Hey there! You must contact the Hp Support (1-800-HP-INVENT) and order a set of recovery disks. They run usually about $30.

• Problems of new messages after the new hard drive installed.

  Just had to have a new hard drive, motherboard, and installed video card. Used to be I could click the "e-mail" on my desk and my new email would open automatically when the Windows Mail open. Now, I can't my new e-mail unless I have manually click on the send/receive button. I have the parameters monitored to check for new messages every 5 minutes. What am I doing wrong now?

  Thanks for any help!

  Yes, I use Vista, funny... it's windown help that popped up for me! Sorry!

  It is ok. For most wanted if sure we had dealing with. This is the forum for Vista for the future.

  Vista implemented network, electronic mail and to get online
  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  Tools | Options | In general. East: send and receive at startup checked? Also try to set it to 6 or 4 minutes. Send yourself a test message and immediately close WinMail. Wait a minute, then open a WinMail. A little luck?

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Sleekbook 4-1115dx: new hard drive installed on 4-1115DX

  Hello

  I recently lost my disk hard but fortunately saved using AOEMI Backupper.  I bought a new hard drive 500 GB and installed but now it was ' 32 GB SSD Drive is redundant?

  How to re - activate the fast RAID boot drive. When I use the software RAID is watch the 32 GB drive connected a 0 GB of disk. My new drive then shows below. I can't talk with the new SSD HARD drive.  I did something wrong, because I can't seem to find an answer.

  PS UEFI installed but eventually wipe all drives inc recovery drive when the HARD drive crashed.

  Thanks in advance guys

  For some reason, it's not unusual on a HP. You must break the existing table that has the mSATA player trapped. It is "degraded". You must cancel the table and then the rebuid it and then use to speed up. You can do this via the tab 'manage '.