Similar Questions

• My new helmet from QY8 does not connect to my iPad. Help, please.

  MY new QY8 is not tapered to my iPad. Help, please.

  Note:

  1before using the headset, please use the USB charging cable to charge everything first.

  2.pairing, press the power button on the headphones, you will see the flashing light blue-red, it will automatically switch mode pairing.

  3. If still cannot contact, please pluging in the charger cable to the headset Bluetooth, then connect to the USB port on the computer. To the loaded state, press the power button on the headphones until the red and blue lights flashing, remove the name of Bluetooth pairing. Finally, please contact your headset with headphones.

  4. make sure you turned on the bluetooth on your phone, model of research on this helmet.

  5. Select the Bluetooth model and click on connect. Enter the password or code 0000 if necessary.

  http://www.coulax.com/product/COULAX_V4_1_Bluetooth_Headphone_E257-4.html

• computer will not recognize new helmet

  OK, so I got a logitec headset cord broke, so I went and bought a headset not expensive gigaware, and which lasted a bit, until this week, where that string broken too, so I've just went to target and got another logitec headset, but when I'm home and plugged, the habit of my computer recognize that any audio device is plugged...?

  Hello

  1. how you connect the head phone to the computer?

  2 have you tried to use the same phone head on another computer and check?

  Method 1.

  This occurs when you have external speakers, by default. We need to put the headset as default.
  Perform the task mentioned to set the headphones as default:
  a. Click Start, and click Control Panel.
  b. click sound, and then a new window will open.
  (c) in the new window click on the tab 'Read' and right-click in the window and click Show disabled devices.
  d. check if headphones are listed and then right-click on it and choose activate.
  e. Select this headset, and then click "Set as default".

  Method 2:

  Check with the volume settings and if it helps:
  (a) right click on the speaker icon in the taskbar, then select volume control options.
  (b) check on "all devices evolving sound.
  (c) make sure that you have "Default uncontrolled communication device".
  (d) place a check on the speakers and headphones.

  Method 3.

  a. right click your sound icon.
  b. click playback devices.
  c. right-click on the reading tab.
  d. click Show disabled devices.
  e. right click on the playback tab.
  f. click Show disconnected devices.

  Method 4.

  check your connection. The most likely source of a complete cessation of the features is loose or unplugged connection. Make sure that the USB cable is correctly plugged into the USB port on your computer and do not move when shaken slightly.

  b make sure that the headset is selected as audio device by default. When a device is listed as a default value, it automatically will be used, even when the other output (such as speakers or a secondary microphone) devices exist. To make your audio/line-in helmet device by default in Windows XP, go to (accessible via the menu 'Start') Control Panel then click on the link "Sounds and Audio devices" and click the tab "Audio". Then under the headings "Audio playback" and "Voice recording", select your headset in the drop-down list. Then the same things in the "Audio" tab click the 'OK' button to save the changes.

  c check the status of the driver. Device drivers are small pieces of software that facilitate communication between computers. To check your device drivers, go to the Control Panel, select 'System' then go to the 'Material' on 'Device Manager' tab and go to the section of sound, video and game controllers. Click on the yellow arrow to show installed audio and audio devices. If you see your device listed, your drivers are up to date. If your device is not listed, or it has a yellow exclamation mark next to it, you need to reinstall or update your drivers. See Manual of the owner of your headset for more information about how to install the drivers for your specific model.

  I hope this helps.

• Buzzing in my new helmet!

  The helmet that I use is the Tritton AX180, it works for all consoles. On the computer that I use the microphone, audio, and USB plug, it only works when everyone is plugged. But when I plug in the USB it just a hum that never goes away. Can someone help me with this problem. I looked for a solution for weeks.

  Hello

  Disconnect the wire that connects to the MIC and check the result. Also, make sure that the earthing is correct for the computer.

  Also try to update the audio drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I have a third generation and need a new battery

  I have not used for a few years and iPods are sought after by a speech therapist because music is very effective for therapy for those who need assistance with their talk.  Is it possible to challenge?  Apple can fix it as when I took it to a repair shop they told me that they would not be able to resolve that the batteries are more achievable.  Other than the battery, it is in very good condition.

  He's too old for Apple to work on it.  You may be able to find an independent electronic repair shop in your area with an Apple expert who can do the job with an Internet search.  Third party spare parts are available from the online sources, such as eBay.  This web site has repair guides

  https://www.iFixit.com/device/iPod_Shuffle_3rd_Generation

  If you can find a place that can do the replacement of the battery, do not forget that a brand new 4th gen iPod shuffle with a year warranty, new cable docking and new helmet costs $49 retail

  https://www.Apple.com/iPod-shuffle/

• My iPhone 6plus Bluetooth will not connect to my headset, after having worked for 2 weeks, that has happened on 2 different pairs, now my new pair doesn't connect at all?

  My iPhone more than 6 is running iOS 9.2 where after awhile, it seems not longer connect to my Bluetooth devices. Now I have a new helmet and it won't even find them to connect.

  Replace the BlueTooth devices in pairing mode and they should reconnect.

• Audio for defective helmet for probook 6570b

  Hello

  I have the 6570b s. I run Windows 7 Enterprise 64-bit.

  When I play using the headphone jack audio, the audio sound horribly distorted. It is not my headphones as my headset works fine on other devices.

  My colleague, who also has a probook 6570b has exactly the same problem.

  I tried updates driver on the internet, but my audio driver is the latest driver.

  I also ran updates with HP support assistant, and I'm updating.

  According to the HP support assistant my audio and sound devices are:

  1 IDT High Definition Audio CODEC, status: ACTIVE, pilot: stwrt64.sys, Version 6.10.6392.0

  2 Intel(r) Audio display, status: ACTIVE, pilot: IntcDAud.sys, Version 6.14.0.3090

  Help, please.

  Problem is the Jack HP used in this book. You use the headphones without microphone pin Jack.

  The photo below left only a helmet of 'Trust' works without a problem...

  Is not to solve this problem, but help you make the right choice in buying a new helmet...

  Hope this helps

• My new headset is detected as a speaker

  I recently got a new helmet. It is intended to be used for the PS3, but USB sound. When I plug my headphones, it detects it as a speaker and it is really very strong, even if I set my volume at 1. I tried my headphones in my sisters laptop and it works fine.

  Here is the screenshot of what it looks like:
  http://oi39.Tinypic.com/2en41w1.jpg
  Please help I would really appreciate it!

  Hello

  -What is the brand and model of the computer and which audio driver is installed on the computer?

  Please check audio driver / software from Control Panel and see if there are settings to disable the detection of jack.

  Regarding the sound being strong, try to disable all improvements and check if it helps.

  -Right click on the sound icon, and then select the playback device.

  -Right click on the USB headset, and click Properties.

  -Select the highlighting tab and place a check on disable all improvements.

  -Press ok and restart the computer and check.

  If the problem persists, uninstall and reinstall the sound drivers and check.

  -Open Device Manager.

  -Browse sound, video and game controllers, right click on the Audio driver (Please take note of it) and click on uninstall.

  -Restart the computer. Windows will automatically try to install the drivers. If this isn't the case, visit the computer manufacturer and download/install the latest audio drivers.

  Hope this information helps. If you have any questions, please let us know.

• After 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear

  Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you

  It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.

  If you hear only on one side, who will tell you that is the question.

  If you hear from both sides, you must obtain a new helmet

  Software will fix either of the foregoing...

• Bat warranty/Apple care?

  Last year on my birthday from July 28. I bought a Macbook air and had a promotion to pay an extra $ 100 for the solo wireless headset Gold 2. I called today because of I have a problem with my beats on the good side and the customer service told me that it is a protection of a year, I said, «well well, I bought $ 200 protection plan the same day as my Mac and which does not cover my helmet as well, since I always buy for all my devices apple protection plans» , the mac Apple Watch, etc. "Apple is owner of beats, then, how is their coverage or protection plan for a year, which was not clearly mentioned or offered at least to be extended when I checked online on the bestie of the last year. I would have bought had it existed. Carefully, I said to a customer representative, so if I called 20 days before I had this problem with my helmet. I would have been in the guarantee that never explained to me in the first place. I called twice and another representative customer told me that he put it in the box. It was very useful because in small text, I looked and found. I don't understand why my beats do not have the apple care plan that specific product, otherwise I would buy it. Please Apple do a better job on the display of the warranty on these headphones and do care of apple/protection plan for it. I'll have to buy a new helmet in the past two months, likely will try the

  Beats headphones wireless on the ear of Studio - gold, but just a little worried about their warranty and repair system plan.

  Because these are user to user forums, you can use it to make a comeback to Apple:

  http://www.Apple.com/feedback/

  FWIW, Applecare documents explain very clearly what is covered and what is not; It's the Applecare we (you can easily look elsewhere if necessary):

  http://www.Apple.com/legal/sales-support/AppleCare/appmacnaen.html

• IPod Shuffle Gen 2 will not load.

  I pod shuffle 2 generation does not load. Light does not illuminate. May be time for a new or repaired.

  You use the USB cable supplied with the shuffle.  For a 2nd gen shuffle, this cable is long with a cradle for the shuffle.  A cable for 3rd/4th gen shuffle does not work with 2nd gen shuffle (connector is different).

  If you use the right cable, but the random reading light lights at all, the cable may be defective.  There is cable of third party replacements.  If you want to try another cable, make sure it is described as being 2nd generation Shuffle (not 3rd/4th generation).  For example, some are not actually cables

  http://www.Amazon.com/adapter-Apple-iPod-shuffle-generation/DP/B000QHOB4S

  It is also possible that the shuffle is defective.  I think that the shuffle would always turn on when connected to power, if the problem is with the battery.  So it is something else, like a worn or damaged headphone jack.  Or bad logic board.

  Whatever you do, don't forget that a 4th gen new shuffle with a new helmet, docking cable, and the guarantee of one year is $ 49 retail.

• Headset will not work.

  Whenever I try to use the microphone in the headphones, I bought recently, it captures any audio. Devices-record thimg Manager brand (microphone in front (black), as it is unplugged, even if it isn't very clear. I have and use, a Dispatcher at with the micro Plug and taking real headphones plugged into the audio jack (only) on my computer, and that same USB cable plugged. It does not do anything but make light; but it is plugged because makes me feel like, I tried some stuff even more. I have tried rebooting my computer, uninstall and reinstall all drivers related to the sound and really every suggestion pages the first 3 Googling the problem has been raised, including using the troubleshooting of the recording devices to the contorl Panel, which also says that the problem is that it is not plugged. She's still.  The label painted on next to the actual audio jack is also labeled a helmet; headset icon there is very clearly a microphone stick-thing on it, and they work perfectly well to hear through, they don't listen. Is that what I can do to get the microphone to work?

  Hi @AlbinoBlackBear,

  I think you use a head phone that has two wires. One for Audio and one for the microphone.

  With this computer, make sure that the power cable of the unit has a connector 4 pin that supports audio output (headphone) and audio (microphone). So, there should be 3 black rings.

  

  The new helmet has a cable for both but still the 3 black rings.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• My headset is not working on Skype

  Just got a new helmet and the microphone does not work. I tried other places and it works but when I call my friends, they cannot hear me! What I am doing wrong? (or not do)?

  Not sure that will fix things, but try to select your new mic in Audio/video in Skype preferences and sound preferences of the Mac system.

  --
  Entia non sunt multiplicanda praeter necessitatem.

• 7.4 Skype freezes computer on call

  Whenever I have start or receive a call (can't do) my computer crashes. And believe me, that you have not been controlled until anyone shaking friends can plant you with a phone call. The graphics card to help im is an AMD Radeon HD 7700.

  Im running with Skype 7.4.

  I had no problem with Skype in the past but now I do, maybe it's because my new helmet but Ive used the brand before with it and it worked well (turtle beaches).

  I tried:

  Unistalling and reinstalling.

  Go to a previous version,

  Update the driver,

  Turn it off and back

  Hammer (no recommenedded.)

  Unplug my headphones before the launch of Skype.

  Maybe more but.

  Resolved,

  Today, I uninstalled AVG... once again. and this fixed the errors I had with Skype,

• Headphones MDR - V2 pads are peeling. How can I get replacement pads?

  Can anyone suggest a source for the new helmet pads?

  Hello Cynthia,.

  Click the link below to set up a purchase requisition for the headphone pad.

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/viewItemDetail.do?operation=getItemDetail&ITE...

  If my post answered your question, please mark it as an "accepted Solution".