New host is added to the cluster

Similar Questions

• What is the MAX number of ESX host that can be added to the Cluster.

  I need to know the maximum host ESX that can be added in the cluster for ESX 3.5, ESX 4.0, ESX 4.1 & 5.0 ESX.

  Can someone give me the maximum without ESX host that can be added in the pool?

  Second, how to determine which ESX server's main Agents & which are secondary agent

  I need to know the maximum host ESX that can be added in the cluster for ESX 3.5, ESX 4.0, ESX 4.1 and 5.0 ESX.

  Can someone give me the maximum without ESX host that can be added in the pool?

  32 in a HA cluster

  Second, how to determine which ESX Server are main Agents & who are secondary agent

  See

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-50-availability-Guide.PDF

  and

  http://www.yellow-bricks.com/VMware-high-availability-deepdiv/

• How can I get my table of cross-checking the information below when a new row is added by the user?

  I created a table with two buttons, when the user selects the button Add, it adds an instance, which works very well, but there is a section under the table and the three fields.  Whenever a row is added, it overlaps with this information.  I did not allow for page breaks, but I do not get a new page.  Any help will be greatly appreciated

  Make sure that your subform Table and the subform text are contained in a Flowed subform.  In this way the subform parent that contains everything that the page is allowed to flow the content of the page.  As subform Table grows, it can hit subform text down.

  Good luck

  Mark

• To vCSA new host?

  Hello

  I have a cluster three host being managed by vCSA device that runs on one of the hosts.  What is the best method to move the vCSA to a new host?  Pouvez vmotion vCSA itself?  Or should I remove the inventory and then add to the new host?

  Please inform, I'm at a stop in production until I got this figuratively.

  Thank you!

  VMotion just to the new host - new host must be in the cluster with the same CPU family as other great hosts

• Installed the new host of the cluster issue

  I have currently two hosts that are in a cluster - I installed a new esxi server to add to this cluster.

  1 set up the vswitch for grouping etc... as the other guests

  2. cannot see other data stores.

  You are using an iSCSI device, I guess?  ESX material for the new host is right for the existing hardware?  If you want to disable the unused adapters, which must be done in the BIOS.

• Replacement of host existing with the new host/material

  We are trying to replace our old 5.0 ESXi hosts that cannot be upgraded to ESXi 5.1 with new hardware that will support ESXi 5.1 and beyond.  Existing hosts are members of a cluster of vCenter vCenter has been updated to the latest version  We are preinstalled ESXi 5.1 on new hosts and tried to set them up according to the configurations of existing hosts, except for host names and network IPs management.

  First of all, are we on track to replace existing hosts?

  Second, what are the next steps we would take?

  We have read the various messages that seem to follow the steps below, but want to ensure that our incense are applied correctly, we don't miss any major or minor measures, for iSCSI, reusing names existing ESXi hosts and IPs or something else causing the replacement to fail.

  1. the vMotion VMs to host existing to another host

  2. remove the existing host to vCenter

  3. stop the existing host

  4. turn on the new host

  5. Add the new host to vCenter cluster

  6. apply the configuration changes

  7. the vMotion VMs to new host

  8. follow the same steps in the next new host

  We lose all the steps?

  Aloha, you were right, this magic file is called state.tgz: VMware KB: locally to restore a configuration of ESXi sauvegardΘ state.tgz

• Problems with the new host VMware ESXi 5.0

  We have a dell blade chassis, with 4 710 blades and 8 610 the 710's have 12 network cards and the 610's have only 6 network adapters. I added a new host on one of the 610's and two network adapters in each of the networks belonging to virtual infrastructure. 1 mgmt 2. ISCSI 3. vmnetwork

  My problem is that the new host can see all the resources but I can't move the VM from the hosts to the host 610 710. I get an error because nic 2 on the 710 host is not in the same network as nic 2 on the 610. It seems silly that I wouldn't be able to do that just because the hardware is not identicle.

  I have three vswitches, vswitch0 for management, vswitch1 for the iSCSI network of shared storage, vswitch2 for the network of the vm.

  Thanks for any help.

  Steven Reeves

  Systems engineer

  Shasta College

  [email protected]

  Material is not identical not should not have an impact.

  The vSwitch port group to which are connected the NICs in question is named identically on both hosts?  If they have a different name, vSphere considers different networks.

• [HELP] Problem with the restoration and recovery in the new host

  Hi, guys!
  
  I have tried for two days, but still can't make it work.
  I took a hot (online) full backup archive as well as the control file logs with the SPFILE and then copy the backup to the new host with the same directory structure and parameters. Finally, I tried to restore and recover the database on the new host, but failed during the restore process.
  
  The original host and the new host have the same subject Oracle installed until the patch level. I couldn't understand the solution to this problem based on my knowledge on Oracle DB.
  
  Could someone help me out here? Any advice would be appreciated!
  
  -----
  RMAN > restore the database up to the wire of the sequence 10 1;
  
  From restoration to November 8, 11
  using channel ORA_DISK_1
  
  channel ORA_DISK_1: from datafile backupset restoration
  channel ORA_DISK_1: specifying datafile (s) to restore from backup set
  restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01. DBF
  restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01. DBF
  restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01. DBF
  restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01. DBF
  restoring datafile 00005 to D:\ORA_DATADATA01. DBF
  restoring datafile 00006 to D:\ORA_DATA\DATA02. DBF
  restoring datafile 00007 to D:\ORA_DATA\INDX01. DBF
  restoring datafile 00008 to D:\ORA_DATA\INDX02. DBF
  channel ORA_DISK_1: backup C:\ORACLE\PRODUCT\10.2.0\FLASH_REC piece reading
  OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BK
  P
  
  switch to the previous backup
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 11/08/2011 11:41:33
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of the file 4 found to restore
  RMAN-06023: no backup or copy of datafile 3 found to restore
  RMAN-06023: no backup or copy of datafile 2 found to restore
  RMAN-06023: no backup or copy of datafile 1 found to restore
  -----
  
  Here is some additional information you might want to know about:
  
  -----
  RMAN > list incarnation;
  
  
  List of Incarnations of the database
  DB key Inc key STATE ID DB name DB reset reset time SNA
  ------- ------- -------- ---------------- --- ---------- ----------
  1 1 PRODDB 3774691295 PARENT 1 17 APRIL 07
  2 2 3774691295 PRODDB PARENT 521803 6 OCTOBER 11
  3 3 3774691295 PRODDB PARENT 1595143 20 OCTOBER 11
  4 4 3774691295 PRODDB PARENT 1600974 20 OCTOBER 11
  5 5 3774691295 PRODDB PARENT 1952053 27 OCTOBER 11
  6 6 PRODDB 3774691295 CURRENT 2146951 7 NOVEMBER 11
  
  RMAN > backup recoverable list;
  
  
  List of backup sets
  ===================
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  37 full 822,34 M DISK 00:29:47 7 November 11
  BP key: 37 status: AVAILABLE Tablet: NO Tag: TAG20111107T175037
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_. BKP
  List of files to backup data value 37
  Name of file LV Type cash SNA cash time
  ---- -- ---- ---------- --------- ----
  2149673 full 1 7 November 11 D:\DBDATA\PRODDB\SYSTEM01. DBF
  2 full 2149673 D:\DBDATA\PRODDB\UNDOTBS01 7 November 11. DBF
  3 full 2149673 D:\DBDATA\PRODDB\SYSAUX01 7 November 11. DBF
  4 integer 2149673 D:\DBDATA\PRODDB\USERS01 7 November 11. DBF
  5 integer 2149673 D:\ORA_DATA\DATA01 7 November 11. DBF
  full 2149673 D:\ORA_DATA\DATA02 6 7 November 11. DBF
  7 full 2149673 D:\ORA_DATA\INDX01 7 November 11. DBF
  8 whole 2149673 D:\ORA_DATA\INDX02 7 November 11. DBF
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  38 full 6.95 M DISK 00:00:03 7 November 11
  BP key: 38 status: AVAILABLE Tablet: NO Tag: TAG20111107T182034
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_07\O1_MF_S_766606834_7CH8Q439_. BKP
  Control file included: cash SNA: 2151141 cash time: 7 November 11
  SPFILE included: Modification Date: 7 November 11
  
  Time of accomplishment time BS key size Device Type
  ------- ---------- ----------- ------------ ---------------
  18,46 39 M DISK 00:00:05 8 NOVEMBER 11
  BP key: 39 status: AVAILABLE Tablet: NO Tag: TAG20111108T093359
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
  2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_. BKP
  
  List of newspapers archived on backup value 39
  The next time that THRD Seq YVERT low low time next YVERT
  ---- ------- ---------- --------- ---------- ---------
  1 1 2146951 7 NOVEMBER 11 2149493 NOVEMBER 7, 11
  1 2 2149493 7 NOVEMBER 11 2149519 NOVEMBER 7, 11
  1 3 2149519 7 NOVEMBER 11 2149565 NOVEMBER 7, 11
  1 4 2149565 7 NOVEMBER 11 2149641 NOVEMBER 7, 11
  1 5 2149641 7 NOVEMBER 11 2172859 NOVEMBER 7, 11
  1 6 2172859 7 NOVEMBER 11 2197851 NOVEMBER 7, 11
  1 7 2197851 7 NOVEMBER 11 2220349 NOVEMBER 8, 11
  1 8 2220349 8 NOVEMBER 11 2222621 NOVEMBER 8, 11
  1 9 2222621 8 NOVEMBER 11 2222729 NOVEMBER 8, 11
  1-10 2222729 8 NOVEMBER 11 2223088 NOVEMBER 8, 11
  
  Time of accomplishment BS key Type LV size device Type elapsed time
  ------- ---- -- ---------- ----------- ------------ ---------------
  40 full 6.95 M DISK 00:00:00 November 8, 11
  BP key: 40 status: AVAILABLE Tablet: NO Tag: TAG20111108T093411
  Part name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
  \2011_11_08\O1_MF_S_766661651_7CJY84LK_. BKP
  Control file included: cash SNA: 2223097 cash time: November 8, 11
  SPFILE included: Modification Date: 8 November 11
  -----
  
  Thanks in advance!
  
  Jay

  In short, the RCS of the controlfile will be generally higher than corresponding SCN of the data in the event of hot backup (online) file; However, the two SNA will be the same in the case of cold (off-line) backup. Am I entitled?

  Yes, it's true. In a backup cold (assuming that the CLOSURE was not a SURRENDER but was NORMAL, TRANSACTIONAL, or IMMEDIATE) all files in the database (data files, redo log and controlfiles files) are 'compatible' - at the same point in time, to the same SCN. In a hot backup, the files are updated. RMAN is not necessarily take all the data files at the same time - for example when you have several data files, RMAN would backup the files in batches of 4 or 8 - data files are therefore controlled at different points in time. Similarly, the controlfile is saved last.

  Hemant K Collette

• How does the cluster?

  Hi all

  I am subsequently helps him learn how to use the cluster to reduce the number of inputs/outputs, but it is quite confusing that how do you know which is which. It follows from the order, whether or not we have added to the cluster? I put a cluster contains 4 numbers DBL as an entry of my Subvi. I name the elements of each DBL as A, B, C, D. In the main code, I create a cluster contains 4 DBL and trying to feed on this cluster in the Sub - VI. But how do I know what number I feed in the main code is A, B, C and D?

  For example, I create a Subvi with the participation of a single cluster. The cluster has 4 numbers DBL named A, B, C and D.

  

  Now if want to feed a cluster in this sub - VI, I create a cluster and connect the 4 digits in this cluster. But if I use the bundle cluster, I need to connect the number in order thus to fill A, B, C and D. But if this Subvi was created by someone else, how can indicate the order of the elements in the cluster WAITED?

  First, you must give the elements of the cluster in the control Subvi the same names (A, B, C, D) as used in the VI call and also to ensure that the order of cluster is the same. If you are not sure fight the cluster command, you can reorder the items (right click) and select the desired command. And Yes, the initial cluster order is the order in which you have added the items.

  Generally, it is preferable that the cluster a typedef and used worldwide. This way to the typdef change is propagated to all the places where it is used.

  It is often more auto-documentent and cleaner to use together and ungroup by name. A constant of diagram of typedef wire upward 'bundle by name' to make the labels available.

• How to bind the elements in the PC, items added in the "edit items...". "list of combobox

  Hello

  Could someone please tell me how can I bind the items added in the "combo box" could be linked to files saved in my PC and if a new file is added in the same folder in my PC, it could be added directly to the list of the combo box items... Thanking you in advance

  Concerning

  Julien

  Thank you very much...

• ICB .uir Table, how auto scroll as new lines are added?

  Code CVI

  InsertTableRows (PanelHandle, ControlID,-1, 1, VAL_CELL_STRING);
  SetTableCellVal ( , );

  Once the new lines are added above the bottom, it does not automatically scroll down to see new entries as a text box.  I saw an example of forcing a ListBox control to the value of the index of control to the most recent entry, but I can't find a corresponding function for the Table.

  Thanks for your help.

  Probably the SetActiveTableCell call may do the trick. You can retrieve the number of rows in the GetNumTableRowstable.

• shows how to create the cluster of refnum user event

  I try to understand and copy this sup - VI, but I have problem in the construction of this cluster of refnum user event, and how to build the local variable?

  

  \

  It looks like your confusion comes from not knowing how to make a group of data, it's an accurate observation?

  To a cluster, you must create an empty cluster and new drag and drop in the cluster. In this case, how to make a refnum of the event, which is the right type of data, you must follow these steps:

  1. Set up the user event create with datatype.
  2. Right-click in the output, and then click on create Constant. This constant is now your refnum of correct data type
  3. Drag the new constant to a cluster to add it to the cluster. This could be within your DataSet defined Type called "Private Events" or another cluster.

  If you change the data type of your event, the wires that connect this event to the cluster of data interrupts the measure where you will have a data type mismatch.

• Migration of servers to new host and SAN

  Hello

  Current configuration:

  2 x ESXi servers, local storage, share nothing.  License of VMWare Essentials

  New configuration:

  3 x SAN Eqllogic, ESXi servers. Essential Plus VMWare license

  I would like to make the transition to the new configuration with minimal downtime, we have invited a few large (> 1 TB) on one of the servers and I don't want them to be disconnected for more than a few minutes, then a migration cold is out of the question.

  I had a thought that I could put the license key more on the old servers and 1 new servers, set the new SAN on the old servers, use VMWare replication to replicate virtual machines among the old servers to the new server/storage, and then perform a recovery.

  I would then remove this old Vsphere server, add a new server and transfer the license, then perform the same task on the old server to 2nd.

  Once it is finished I remove the old server 2, add the new 3rd server, and move the license.

  Can someone tell me if this is possible, or suggest alternatives?

  Thank you

  Dean.

  Hi Dean,

  Replication (replication vSphere) VMware will be requires downtime when you are recovering from the old host to new host.

  How much time can you afford for downtime?

  The recovery process will turn off the source/protected VM on the current host (VM function how long it would normally take to perform a shutdown comments) and destination/recovery VM will be powered on to a new host (again, depends on VM normally, how long it would take for the operating system and services until then a normal diet on the process).

  vSphere replication requires vSphere Web Client and other requirements, as described here: 5.5 - replication requirements vSphere vSphere Documentation Centre

  You have a vCenter Server?
  What version of ESXi (and vCenter) do you use?

  If you don't have a vCenter Server yet, I suggest you install a vCenter server and add all the current 2 ESXi hosts + 1 new ESXi host.

  From there, you'll have an ESXi 3 host, then you can migrate current ESXi host for new.

  If you are using vSphere 5.1 + you can vMotion, even if the host do not have access to the same storage see this: library of vSphere 5.5 - Migration with vMotion in environments without storage shared

  Its quite simple, if you are using vSphere 5.1 +.

  -Make sure you have vcenter Server 5.1 + with vSphere Web Client

  -Add current hosts + 1 new hosts

  -Make sure the vMotion without requirement for shared storage are filled with VSphere 5.5 Documentation Center - requirements and restrictions for vMotion without Shared Storage

  -Perform vMotion without process Shared Storage of current host to the new host + local storage to SAN EqualLogic - you can start with small VM and VM less critical first if you are not sure.

  -Once all virtual machines have been migrated to the new host + EqualLogic SAN, you can do a maintenance on the current host mode, and then delete the vCenter Server (vSphere licenses will be retrieved)

  -Add the 2 remaining new hosts.

  If you are using vSphere 5.1 prior, you must present the SAN EqualLogic again 1 new host and current 2 hosts.

  Once current hosts can see the EqualLogic SAN, make a Storage vMotion (live migration records) local storage to the EqualLogic.

  For first migration vSphere 5.1, there are 2 ways that I can think of:

  1. with vMotion - without interruption

  There are certain requirements of configuration for vMotion work: Documentation Centre of vSphere 5.5 - Migration with vMotion

  Make sure your classes and new hosts are run in the same processor / EVC mode or matrix, you can check it out here: http://www.vmware.com/resources/compatibility/search.php?deviceCategory=cpu

  If they are on different EVC Mode, you can turn on the CEV on new hosts.

  The steps are:

  S ' ensure that virtual machines are in EqualLogic (you can use Storage vMotion)

  -Perform a vMotion from the current host to new host.

  -Once all virtual machines have been migrated, you can safely do a maintenance on the current host mode and remove the vCenter Server

  -Add the remaining 2 new hosts the vCenter.

  2. without vMotion - requires the interruptions of service commissioning

  It's cold migration but without migration of storage, must be less compared to downtime directly cold immigration to localdisk of shared storage.

  The steps are:

  S ' ensure that virtual machines are in EqualLogic (you can use Storage vMotion)

  -Turn off the virtual machines in the current hosts and migrate (cold) of the host-to-host former New (you can also drag the virtual computer and drop it to the new host).

  -Once all virtual machines have been migrated, you can safely do a maintenance on the current host mode and remove the vCenter Server

  -Add the remaining 2 new hosts the vCenter.

• migrate virtual machines to new host

  How can I migrate easily all my virtual machines (12) on my current 5.1 ESXi host to new host ESXi 5.1... ?

  [1] put the former host's hard drive in the new host and perform an upgrade from 5.1 ESXi installation disk (the hard drives of the two hosts are the same)?

  [2] put HDD in the new host as a secondary, pop disk in the ESXi 5.1 installation disc to install ESXi 5.1 on the new host's hard drive, but migrate/import virtual machines from the data on the secondary drive (drive old host) store? the host of the former

  [3] pop in the ESXi 5.1 installation disc to install ESXi 5.1 on the new host's hard drive. Once completed, put the hard drive of the host of the former in the new host as a secondary drive and copy/import virtual machines from the data store on the secondary drive (drive old host) using VMware vSphere Client?

  [4] install ESXi 5.1 on the new host, he networked with the old host and use VMware vCenter Converter to import virtual machines from the old host?

  What might work is engaging the larger disk of 'old' to a SATA port once you have installed the disk again, ESXi. Attaching to a port USB probably won't work because VMFS volumes are not supported on USB devices.

  André

• Page added in the component isn't veiwable

  Hi all
  
  I created a new page and added to the existing component. It works very well in an environment (DEV).
  I had copied the project in the flat file, uploaded to a different environment (TEST) and followed the instructions of compilation.
  But I'm not able to view the added page recently in the new instance within the same content reference (also delete cookies and tried).
  
  I wonder why the page does not display. No securityis this restriction.
  
  Please let me know what is the work around, I have to follow when adding new page to the existing object.
  
  
  Thanks in advance

  Did you check the security on the whitelist?

  Have you checked that the reference of the content shows the security access in the Structure and content?

  You have run the Sync Security Portal?