New Hyperic user, hopefully simple question...

Similar Questions

• User interface simple Question

  I apologize in advance for the simplicity of this question is probably, but I can't seem to find a way to do it.

  I want to show a label that is framed with a value that is justifield just so that the labels are all on the left and the values are all right on the left.

  I tried:

   HorizontalFieldManager row1 = new HorizontalFieldManager();
          LabelField l1 = new LabelField("Linked:  ");
          LabelField l2 = new LabelField(
                  (theApp.getIsLinked()?"Yes":"No),
                  Field.FIELD_RIGHT);
  
          row1.add(l1);
          row1.add(l2);
          add(row1);
  

  That did not work.  I also tried a few other things but can't seem to make it work.

  Thanks in advance.

  Here you go:

  HorizontalFieldManager Row1 = new HorizontalFieldManager();
  LabelField l1 = new LabelField ("Linked:", LabelField.FIELD_LEFT);
  LabelField l2 = new LabelField ("No.", DrawStyle.RIGHT |) LabelField.USE_ALL_WIDTH);

• New at AS 3: simple question: mouse timed event

  Hello.

  I 'try' to learn AS 3 (I am an art background so bear with me).

  That's what I want to do:

  When the mouse moves constantly more than 2.5 seconds, add the movie clip (and play) "Of INK" on the stage at the position where the mouse was at this time.

  Can't seem to do things.

  TX... Grant

  Here is the code, warned, so if it does not, it's because I just rewrote what you had and am not paste in my version.  I inserted the story lines, so that hopefully, you can see how the code is built, based on it.

  One thing you will find is that the frame of entry run things very quickly, to the point where, if you hesitate a bit with the mouse, for example just move back and forth constantly... this tiny amount of time where you stop to change direction is enough to determine the mouse stopped.  A way around that could be to use a timer with a delay instead of the enter frame listener.

  var inkTimer:Timer;

  var prevMouseX:Number = mouseX;

  var prevMouseY:Number = mouseY;

  / * The MOUSE_MOVE (last line of code) listener is watching to see if the mouse moves.  Once the mouse is moved, the MOUSE_MOVE starts a TIMER as well as an ENTER_FRAME listener... and the MOUSE_MOVE is removed from the game for a bit. */

  function startInkTimer(e:MouseEvent):void

  {

  inkTimer = new timer (2500, dropInk);

  inkTimer.addEventListener (TimerEvent.TIMER, dropInk);

  inkTimer.start ();

  stage.addEventListener (Event.ENTER_FRAME, watchMouse);

  stage.removeEventListener (MouseEvent.MOUSE_MOVE, startInkTimer);

  }

  / * If the TIMER expires, it deposited a piece of INK, removes the ENTER_FRAME and himself and bring the MOUSE_MOVE at stake for another round... but then the TIMER's time... * /.

  function dropInk(e:TimerEvent):void

  {

  var ink_mc:INK = new INK();

  addChild (ink_mc);

  ink_mc.x = MouseX;

  ink_mc.y = MouseY;

  ink_mc. Play();

  inkTimer.removeEventListener (TimerEvent.TIMER, dropInk);

  stage.removeEventListener (Event.ENTER_FRAME, watchMouse);

  stage.addEventListener (MouseEvent.MOUSE_MOVE, startInkTimer);

  }

  / * If the ENTER_FRAME should detect that the mouse has ceased to pass, he removes the TIMER and himself and brings back the MOUSE_MOVE in game. */

  function watchMouse(e:Event)

  {

  If (prevMouseX == mouseX & prevMouseY == mouseY) {/ / mouse stopped}

  inkTimer.stop ();

  inkTimer.removeEventListener (TimerEvent.TIMER, dropInk);

  stage.removeEventListener (Event.ENTER_FRAME, watchMouse);

  stage.addEventListener (MouseEvent.MOUSE_MOVE, startInkTimer);

  }

  prevMouseX = mouseX;

  prevMouseY = mouseY;

  }

  stage.addEventListener (MouseEvent.MOUSE_MOVE, startInkTimer);

• BlackBerry smartphone brand new Blackbury user. lot of questions

  Hello.

  I just got the Blackberry curve 8330 yesterday.  I understood a lot about using the guides and reading the posts on here but I have a few questions, some may be stupid.  I hope that I don't ' have too much for you guys... lol

  (1) for the loading and the phone is or off.  Is there a way to do beep or something.  I hate watching to see if the light is flashing, or hit the screen when turned on to see if the loading icon bit has disappeared.   I know I'm picky about a few things... lol

  (2) where, in the call logs.  Is there a way to delete more than one message or text at a time.  Sometimes I'm lazy and don't ' delete them as they arrive or I emailed them but wait.  My old phone (nothing as fancy as a blackberry) you can select an option to delete everything.

  (3) the speaker.  how far do you have to have the phone away from you and ask the person to hear you again? (says they could be stupid questions... lol)

  (4) is it OK to keep the card media permanently.  I mean how do you know when you want to shoot a video or more pictures, then it may take?

  OK, I think that's all for the moment... lol

  Jenn

  (1) no way to have a beep when the BlackBerry is responsible. And its going good to load it when its on.

  (2) to messages, press ALT + P. This allows to display phone calls. You can delete multiple at once here entries.

  (3) I guess it depends on how hard you're talking about.

  (4) Yes its okay to leave the card in all the time. I never leave my memory card.

• Create a group of users to ACS 3.3 - simple question

  Hello

  I have a simple question:

  How can I create a group of additional users at the ACS 3.3?

  I don't see the option to delete or create groups of users. Perhaps is it not possible?

  Thanks in advance

  All groups that you have already exist in the list of groups (0 to 499). To "create" a new group, just rename one of the unused existing groups and use.

  If you don't see the groups in your list, you must verify that you have access to see all these groups.

  Verifier check in the control of the Administration, select your admin user ID. In the second table below marked 'administrator', you will see the "available groups" and the editable section 'groups '. move the groups that you want to use available for editable.

  Present and then OU should be able to see these groups on your drop-down list in the section groups.

• Simple question on the passage of ID variables in a url after you add a new record

  Hello;
  I know it's a simple question, I have a brain block. I'm going from a form and insert a new record in the db, but after I insert the new record, I want to pass the ID variable that gets are entrusted to him. How can I do this?
  
  It's my code to insert:
  
  < cfset EventDate = "#DateFormat(form.eventDate,"mm/dd/yyyy") #" >
  < datasource = "" #APPLICATION.dataSource # cfquery "dbtype ="ODBC">"
  INSERT INTO events
  (title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
  VALUES (< cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.title #" >,)
  < cfqueryparam cfsqltype = 'cf_sql_date' value = "" #EventDate # ">,"
  < cfqueryparam cfsqltype = "cf_sql_time" value = "#form.eventTime #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.location #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.contact #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.phone #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.fax #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.email #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form. "URL #" >.
  < cfqueryparam cfsqltype = "cf_sql_varchar" value = "#form.sponsor #" >.
  < cfqueryparam cfsqltype = "cf_sql_longvarchar" value = "#form.body #">) "
  < / cfquery >
  < cflocation url = "events_RecordView.cfm" >
  
  In the cflocation I want to pass the variable ID, how about a new record?
  
  Thank you.
  
  CFmonger

  Try this. This will select in the query exactly what was inserted just enter the id and pass id just to get in the variable. If two people fill out the form at the same exact time, that assure that they are redirected to the appropriate page.

• broadcasting live does not appear, and I think that its connected to the "firefox" bug, please help, new mac user!

  so far, your main problem is flash player, you must include the updates Flash Player with all the updates of firefox, oh and updated player get. It's your bug I 'think '. If it is not part of the territory firefox let me know. However, will not be broadcast live, I asked them, they had little info. including, you update your browser recently - with no answer to this question, so here I am. I don't know if the flashplayer or everything that has nothing to do with live stream or not, BUT quicktime play or help live streaming right? have no idea and the new mac user. GL

  Adobe Systems, Inc. (owner of Adobe Flash) is not related to Mozilla Org in any way. Mozilla has nothing to do with updates to the software they do not create or owned by another company.

  You have a very old version of Flash installed - Shockwave Flash 9.0 r47 - you must upgrade to the latest version available for Mac OSX 10.4.
  
  http://www.Apple.com/downloads/macosx/internet_utilities/adobeflashplayer.html

• I have a simple question which I'm sure someone will be able to respond easily - I have windows xp, I've added nothing to my machine, but it does not now download updates - when I try to go on the microsoft download Web site - I can't. Help, please.

  I don't know how long this has happened, I get the shield down, but my downloads are not downloaded.

  I know that I probably won't get a response to my three questions, but I want to post a separate thank you.  It's really great that you use your knowledge to help people like me who just bumble along...  Thanks again.

  Now I have 3 questions that are not questions of direct update but I have the feeling that you can help.

  I now have service pack 3

  1. is windows better than Kerio firewall
  2. I said do not install IE8 - what you think
  3. should I perform MAM and Onecare safety scanner regularly.

  I thank in advance.

  J

  You're too kind, Joan. And, you're welcome mowst. Let's start from the beginning.
  Does firewall Kerio and AVG protect your system ?
  Go by the log MBAM, the answer is No .
  Windows native firewall is a sufficient protection when a system is on a network where the router contains a hardware firewall . A router that has a hardware firewall is not so expensive and well worth the investment.
  You can use a wired router, as opposed to a router costs a little more, if necessary.

  Now, as for the antivirus, I'm not a big fan of the AVG used by the user to type.
  I would recommend that the user typical home use AntiVir or Avast on moy. Like AVG, both are free for home use.
  For paid AVs, I would recommend NOD32 or FPROT .
  Microsoft Security Essentials, which is also free, we hope to be a solid AV, but I can not recommend at this stage.

  Installation of critical security updates, it is a needs . It seems that some malware has been able to infect the system due to the absence of the same installation. Specifically this one:

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet004\Services\Tcpip\Parameters\Interfaces\ {f5eb5c1a-9817-46c9-b36a-6a6a007a8621} \NameServer (Trojan.DNSChanger )-> Data: 85.255.115.110,85.255.112.175-> quarantined and deleted successfully.

  Indicate if another update problem occurs that you wait not long to take care of it. Installation of critical security updates prevent many infections.

  I think that IE8 is the best browser that MS has ever released. If you choose to install it, strongly suggests you download the standalone installation package manually and Save it. Close all open programs and browsers.
  Temporarily disable the antivirus installed by following the steps in clean boot, and then install it.
  Make sure that you reboot twice when it installs.  You should receive at least a prompt to reboot, but do another after recommend an anyway.

  Now, back to the question 3. Strongly suggest you boot the system in Safe Mode and do a full scan of the system, just to be sure that MBAM has detected and deleted all the malware. Make sure you update MBAM before each scan .
  You can do it in normal mode Windows or Safe Mode with setting in network, but not in Safe Mode as long as the system is not connected to the internet in Mode without failure.
  It will take time for the full analysis to run, but it was worth. There may still be present hidden malware.
  And Yes, do at least an fortnight analysis with MBAM is well worth.
  In fact, you should consider buying the paid version, as the protection in real time, unlike the free version, and it will not come into conflict with the installed AV.
  Did a scan monthly with the OneCare safety scanner is also a smart thing to do.

  BUT , if it were a client system, I no longer trust him to bank services online or any other financial transaction.
  The system may have wrong headed by the DNSChanger trojan to web sites that were not what they seem.
  As well as information from financial transactions, passwords that you use, and no personal information stored on the system were also sent to the malicious web servers.
  To strongly suggest that you change every password you use just to be on the safe side.
  If you need or want to do transactions from this new system so the only way that you can trust , it is to format the hard drive and reinstall XP. Now that Service Pack 3 is installed and If you have the XP installation CD, you can do what is called a slipstream SP3 with the installation CD. In this way when format you and reinstall XP, it will be the SP3 and you'll save time by not having do not install several security updates.
  It's really not hard to do. Here's a good tutorial with graphics that explains it all:
  XP CD slipstreamed Windows using SP3

  And, finally, any AV or security program protects a system when the user installs the questionable software .
  Be very careful of free software, stolen software, cracked, key generators and other programs.
  Always investigate any software that seems too good to be true. As in real life, something that seems too good to be true probably is . Discover the software using Google or Bing to see what others have to say and to report on this issue.

  Be careful and safe surfing, Joan.

  MowGreen MVP Data Center Management - update of safety Consumer Services

• Simple question R61i Ultrabay...

  It's really a simple question, but I can't find the answer in any of the documents online.  I have a laptop Lenovo R61i 15.1 "widescreen, and I just need to know if it comes with a slot for Ultrabay Slim drive, a drive advance Ultrabay location or an other versions Ultrabay.  I would like to buy a long battery life to adapt to the Ultrabay box, but I see that the different Ultrabay models are not compatible, I want to know what one I need to buy for my computer.  Any help appreciated.

  widescreen 15.4 inch R61i like any other laptop R6x use housing Ultrabay Enhanced readers with EIDE interface and not the new laptop Rxxx SATA interface.

• BlackBerry Smartphones has simple question on volume of phone ringing.

  I am grateful for this forum because even simple questions like the following are difficult to obtain responded by Blackberry.  Seizing the issue in the 'Help' section on my handheld gives always nothing.  It seems that a large company like RIM would understand more in their user manuals.  Anyway, enough ranting... Here's the question:

  Quite simply, how can I increase the volume of the ringer on the phone?  By pushing the volume button for a call that increase the volume of calls.  Pushing not courts of appeal does nothing.  I'm sure that there is a way to do it, but I'm coming emptyhanded.

  Thank once again the community here as a whole for the excellent work which is made to help other Blackberry users.

  Profiles > advanced > highlight the profile you want to edit > press the menu key and go to 'Edit' > scroll down the list and find what you want to change the volume of the ring tone for example, standard messages

• How can I add two very simple Questions to a slide?

  Hello

  I would like to be able to add two very simple questions to a slide, but don't know if (or how) this can be achieved. I've explained this more in detail below:

  ====================================================================================

  Scenario of

  The slide must contain two questions:

  Question 1: with two check boxes for the options Yes and No

  Question 2: with five check boxes for options 1 2 3 4 and 5

  A button (for example named Submit) to verify the responses from users by triggering a tip Action that verifies the radio buttons that have been selected.

  ====================================================================================

  The checkbox Widget looks like it could work for this scenario, because it allows each value to be assigned to a variable. However, when you try to put in place the tip Action I couldn't see all the variables I named in the checkbox Widget.

  
  

  If anyone has done this kind of thing before and can offer advice on the best way to create custom questions, I'd appreciate any help.

  
  

  For reference, I use 8 Captivate.
  

  
  

  Thank you

  
  

  Ross
  

  I indeed used interactions of checkboxes or radio buttons many times for this kind of slides. That's why I'm confused and I first want to know if you want an answer to the second issue as well? For the first question, it is clear that you need an interaction of option buttons, I don't know if you want to allow more than one choice for the second question. Only when you need to allow more than a choice will you have the interaction of check boxes, in the other scenario, option buttons will do the trick. It makes a big difference, because the radio button widget has only one associated variable that will store the selected element. For the widget checkboxes, you need a variable for each choice.

  Maybe my blog could help clarify, you can also download a descriptive table with all interactions of CP8 training

  Advice - Training interaction - Captivate blog

  BTW, I moved this thread to the Quizzing subspace.

• Starting with a Cintiq in Adobe Flash - a series of simple questions desperately not found!

  I am completely new to the Flash IDE, but I used my 13HD Cintiq with Photoshop in the past. Despite the Tablet works well and correctly drawing, so far Flash feels very weird and almost unusable. I spent hours searching online for answers to these simple questions, and I found nothing. Help please respond if you can!

  1. Eraser brush size: I have the wacom pen, brush and Eraser gum (pretty standard) value. Can I adjust the size of the brush of the pen in the toolbar, but the gum is stuck to the smaller size! I put the tool eraser for the max brush size, and when the stylus is set on the Eraser tool directly, it is larger. How to set the other side of the pen wacom for a larger size of the brush? And aren't there keyboard shortcuts to increase or decrease the size of brush in Flash? (similar [and] in Photoshop)

  2 zoom brush: changes the brush size when you zoom in. People online say the size of the brush is constant, but it is simply not true. When you zoom to 200%, the brush must be twice as big is in 100% zoom. Is it possible to Flash this (normal) behavior?

  3 timeline packaging: can visit the 'step before an image' and "not back an image" (comma and period) key wrap the entire timeline, so walking to the front on the last image will frame 1 and walking backward on frame 1 goes to the last image? It's important for me to animate well loops, and I can't find anything online or in the preferences. Shift + comma and shift + period is acceptable workaround solutions, but they are not ideal, because I have the comma and period mapped to buttons on the Cintiq. I need them to wrap!

  4 digital brush thickness: is there a way to specify a thickness of brush with a number? I have to use the pen to get the STROKE thickness properties? At the very least, can I use a keyboard shortcut to specify the size, rather than click on toolbars?

  Honestly, I'm at the end of my rope here. I'm almost ready to completely abandon the Flash this in Illustrator, and then animate in Flash, so I've drawn everything correctly. Why everything is so different, and why I can't find one of these simple questions online?

  Him long and short of it is no you can't do most of the things you want to do as much as the brush is concerned. Flash has ALWAYS increased the size of the brush as you approach and it decreases when zooming. Why? No idea, but it has always been so.  You CAN increase the size of the brush in numbers but using the properties box. The Eraser is weird in Flash. so I use the Lasso tool and select what I don't want and delete it. Given that you're used to Illustrator you might not realize that selection of a brush stroke areas will NOT select the entire race as in Illustrator. You can only select parts. You can also sort of allow for what you call enveloping chronology by installing a command and by mapping to a custom key command. Make sure that there is a keyframe at the end of the cycle.

  Dropbox - Flash_Select_Next_and_Previous_Keyframes.zip

  Also, this could sort through what you want too:

  http://www.toonmonkey.com/frameJumper.fla

  Finally, Flash is no different that there has never been and it must be considered that, while the Illustrator has been developed by Adobe, Flash was developed by Macromedia and was then bought by Adobe years later then you "cannot really be expected to operate the same. Personally, I HATE the interface of Illustrator and hate the way it works if I hate it if Flash worked as an Illustrator!

  In any case, I hope this helps.

• Can Captivate 6 reset a simple question slide?

  Captivate 6 has the ability to reset a simple question slide?  I know I could use the widgets for custom (via this discussion http://forums.adobe.com/message/4349072) questions, but I wanted to see if it's built-in to COP6.

  Structure of CBT (simplified example)

  Cover the slide list sections A, B, C, with "Show Me" and "Test me".

  1-10 of slides: demonstration, section a.

  11-20 of slides: demonstration, section B

  21-30 of slides: Demonstraction, section C

  Slide 31: Question for the section slide has

  Slide 32: Section B Question slide

  : Slide 33 Question for section C

  If a user forgets the question in section A, they are sent to revise section A again.  At the end of section A, the learner is sent to slide 31, question slide A section (using variables to know that they already do not have the issue once).

  Problem: When they are referred to the section a question, he does not answer them.

  Goal: Restore the question during the second attempt slide is still a Virgin.  Once the slide 31 pass, they will be addressed to the slide 32: 33 drag, etc..

  Thanks for all your help so far.  This CBT is one of the most advanced I did for this organization.  They have certain requirements really well.

  Micky

  Hey Micky,

  I tried to reproduce your script and it worked fine for me, it would be useful that you can share your project ([email protected]).

  Kind regards

  Avinash

• A simple question please help.

  Hello

  I have 2 textfields and a button. I want to enter a number (in diameter) in the first textfield (inputField) and by clicking the button (myButton), I want to get the (circumference) result in the second textfield (inputField1). diameter * 3.14. I know it's a simple question, but it is a very simple mind. Then, have mercy on me.

  import flash.display.Sprite;
  import flash.text.TextField;
  import flash.text.TextFieldAutoSize;
  import flash.text.TextFormat;
  import flash.text.TextFormatAlign;
  import flash.events.MouseEvent;

  var inputField:TextField = new TextField();
  var myFormat:TextFormat = new TextFormat();
  myFormat.size = 44;
  inputField.defaultTextFormat = myFormat;
  inputField.restrict = "0-9";
  inputField.maxChars = 6;
  inputField.multiline = false;
  inputField.textColor = 0 x 000000;
  inputField.border = true;
  inputField.width = 150;
  inputField.height = 50;
  inputField.x = 75;
  inputField.y = 50;
  inputField.borderColor = 0xFF0000;
  inputField.type = "input";

  addChild (inputField);

  
  var inputField1:TextField = new TextField();
  var myFormat1:TextFormat = new TextFormat();
  myFormat1.size = 44;
  inputField1.defaultTextFormat = myFormat;

  inputField1.maxChars = 1;
  inputField1.multiline = false;
  inputField1.textColor = 0 x 000000;
  inputField1.border = true;
  inputField1.width = 150;
  inputField1.height = 50;
  inputField1.x = 275;
  inputField1.y = 50;
  inputField1.borderColor = 0xFF0000;

  addChild (inputField1);

  
  myButton.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler_2);

  function fl_MouseClickHandler_2(event:MouseEvent):void
  {
  {
  trace ("mouse clicked");
  

  }
  }

  use:

  import flash.display.Sprite;
  import flash.text.TextField;
  import flash.text.TextFieldAutoSize;
  import flash.text.TextFormat;
  import flash.text.TextFormatAlign;
  import flash.events.MouseEvent;

  var inputField:TextField = new TextField();
  var myFormat:TextFormat = new TextFormat();
  myFormat.size = 44;
  inputField.defaultTextFormat = myFormat;
  inputField.restrict = "0-9";
  inputField.maxChars = 6;
  inputField.multiline = false;
  inputField.textColor = 0 x 000000;
  inputField.border = true;
  inputField.width = 150;
  inputField.height = 50;
  inputField.x = 75;
  inputField.y = 50;
  inputField.borderColor = 0xFF0000;
  inputField.type = "input";

  addChild (inputField);

  var inputField1:TextField = new TextField();
  var myFormat1:TextFormat = new TextFormat();
  myFormat1.size = 44;
  inputField1.defaultTextFormat = myFormat;

  inputField1.maxChars = 1;
  inputField1.multiline = false;
  inputField1.textColor = 0 x 000000;
  inputField1.border = true;
  inputField1.width = 150;
  inputField1.height = 50;
  inputField1.x = 275;
  inputField1.y = 50;
  inputField1.borderColor = 0xFF0000;

  addChild (inputField1);

  myButton.addEventListener (MouseEvent.CLICK, fl_MouseClickHandler_2);

  function fl_MouseClickHandler_2(event:MouseEvent):void
  {
  {
  inputField1.text = String (Math.PI * Number (inputField.text));

  }
  }

• Simple question about calling script

  Hi people,

  I am new to flash and actionscript, so only to learn one simple question. (I have not found an answer while the former posts surf/reading again)

  If I wrote a script at the top of my project:

  btnTest1._visible = false;

  btnTest2._visible = false;

  btnTest3._visible = false;

  etc.

  I can create something to call this script in without having to re write the original code if I need to use it again, for example:

  btnTest4.onrelease = function() {}

  btnTest1._visible = false;

  btnTest2._visible = false;

  btnTest3._visible = false;

  }

  I'm looking for a way to store need to unnecessarily repeat the script

  See you soon

  Yes, you can create features and reuse them as long as they remain accessible.  Just be aware that you are showing code Actionscript 2, Actionscript 3.  Below it is rewritten in AS3...

  function hideEverything (): void {}

  btnTest1.visible = false;

  btnTest2.visible = false;

  btnTest3.visible = false;

  }

  And that the function could be further simplified because of the way you named elements (more sense if there is more than a mere 3)...

  function hideEverything (): void {}

  for (var i: uint = 1; i<4;>

  This ["btnTest" + String (i)] .visible = false;

  }

  }

  Place the strings in parentheses causes their names of proceedings for assessment.